Darkflash M305 fanless computer case (Black)Darkflash M305 is a meticulously designed Micro-ATX computer case that combines compact dimensions with functionality and futuristic design. It was created for users looking for good value for money, without compromising on airflow, hardware compatibility and aesthetics. A transparent side panel made of tempered glass allows you to effectively display your components, which is sure to be appreciated by fans of RGB backlighting (Red, Green, Blue, a backlighting system based on three colors: red, green and blue) or elegant kits. From now on, your gaming space will look classy and stylish!Practical solutions for everyday useThe case is equipped with a side panel made of tempered glass, fixed with convenient thumb screws. This gives you quick and easy access to the computer's interior, without the need to reach for tools. This solution works great for both hardware upgrades and regular cleaning of the cooling system. The front of the case has a modern, openwork panel with vents, which not only gives the whole case a dynamic character, but most importantly helps air circulation, protecting components from overheating.Efficient cooling systemDarkflash M305 offers a lot of freedom when planning cooling - you can fit as many as 7 120 mm fans inside. Such an arrangement allows you to build a very efficient air cooling system, which translates into stable operation of the processor, graphics card and other components, even during intensive gaming or work on graphics programs. The layout of the fans can be customized to ensure even airflow throughout the case.Compact format, big possibilitiesAlthough the case has small external dimensions (325 × 195 × 387 mm), its interior has been designed for maximum space utilization. It will easily accommodate a graphics card up to 300 mm in length and a CPU (Central Processing Unit, CPU) cooling system up to 160 mm in height. The case supports M-ATX (Micro Advanced Technology eXtended, a motherboard format smaller than the standard ATX) and ITX (Information Technology eXtended, an ultra-compact motherboard format) motherboards, allowing you to choose the right configuration for both an office and gaming PC.Thoughtful interior and space for dataInside you'll find a specially designed mounting bracket that allows you to install two SSDs (Solid State Drive, solid state drive) and two traditional HDDs (Hard Disk Drive, hard drive). This arrangement gives you a lot of flexibility in scheduling your operating system, games and data storage. The entire interior has been designed with order in mind - cables can be routed aesthetically, which promotes both appearance and better cooling.Quick access to portsOn the top edge of the case is an intuitive panel of inputs and outputs, including an advanced USB 3.0 connector (Universal Serial Bus, a connector standard for powering and charging electronic devices, as well as for data transfer). It allows fast file transfer and convenient charging of mobile devices. The top location of the ports makes it convenient to use them no matter where the computer stands - on or under the desk.Includedmotherboard screws x12hard drive screws x4power supply screws x6iron columns x2manual ManufacturerDarkFlashModelM305Housing typeMini TowerSide panelTempered glassMotherboard standardM-ATX, ITXPSU standardM-ATX, bottom mountSlots for internal drives4 (2 x 2.5", 2 x 3.5")Expansion card slots4Max PSU length160 mmMax length of graphics card300 mmMax height of CPU cooler160 mmMax number of fans7Fan mounting optionsRear: 120 mm x1; Top: 120 mm x2; Front: 120 mm x2; Bottom: 120 mm x2Water cooling mounting options-Number of fans installedNo fans includedType of fansNo fans includedButtons and controlsPower, ResetConnectorsUSB3.0 x1, USB2.0 x2, HD AudioMaterial0.45 mm SPCCColorBlackHeight387 mmWidth195 mmDepth325 mm
The latest generation NZXT H6 combines modern design, outstanding cooling performance and an exceptionally user-friendly design in a compact mid-tower format. With its seamless, curved tempered glass panorama, the case offers a clear view of the built-in hardware and impressively showcases powerful components. NZXT's new design language combines elegant aesthetics with functional improvements, making the H6 an ideal choice for demanding gaming and enthusiast systems. The sophisticated dual-chamber layout separates the power supply and cable management from the main system area, creating a tidy interior and optimizing air circulation. The angled air inlets ensure targeted airflow to the most important components and support efficient cooling even under high system load. The concept is complemented by large mesh elements, which ensure a maximum supply of fresh air. Despite its compact design, the NZXT H6 offers generous space for modern high-end hardware. It supports ATX, Micro-ATX and Mini-ITX motherboards as well as graphics cards with a length of up to 390 millimeters. In addition, up to ten 120 mm fans and radiators up to 360 millimeters can be integrated, meaning that both air and water-cooled systems can be easily implemented. For additional stability, the case has an integrated GPU holder that reliably supports even heavy graphics cards. At the same time, side panels that can be removed without tools, generous cable routing channels and pre-installed cable ties make it easier to set up the system cleanly and conveniently. The compatibility with modern back-connect mainboards also enables particularly tidy builds with almost invisible cabling. Tower case type Color white EAN 5056547209340 Manufacturer no. CC-H62FW-01 H6 series Midi tower design Motherboard form factor ATX Material steel, tempered glass Window Kit Yes Mesh front Yes Internal dimensions plug-in card length maximum 390 mm Internal dimensions CPU cooler height maximum 165 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 200 mm Drive bays 3.5 inches internal Drive bays 2.5 inches internal Slots full size 7 pieces Slots Slots Tool-free Yes Front connections 1x audio, 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 2x2 (20 Gbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. The designation USB 3.2 Gen 2 corresponds to the previous designation USB 3.1 Gen 2 / USB 3.1. 1 x 120 mm fan can be installed on the back Notes Cable management: 90 mm, nylon dust filter: bottom, front right: 3 x 120 mm fans can be installed, top: 3 x 120 mm fans can be installed, 2 x 140 mm fans can be installed, bottom: 3 x 120 mm fans can be installed Water cooling possible Yes Water cooling possible Supported radiators Top: 360 mm (up to 400 mm), back: 120 mm Rear connection of the motherboard Yes Accessories available, user manual, mounting accessories Volume 55 l Dimensions Width: 29.2 cm x Height: 44.8 cm x Depth/Length: 42 cm Weight 7.5kg
MÕÕTMED: 215 x 473.5 x 454 EMAPLAADI TUGI: Mini ITX; Micro ATX; ATX GRAAFIKAKAARDI PIKKUS KUNI: 405 mm PROTSESSORI ÕHKJAHUTI KÕRGUS KUNI: 170 mm TOITEPLOKI ÜHILDUVUS: ATX; 17 cm KAABLITELE RUUM: Olemas KAAL: 7.2 kg Ühenduvus I/O PANEEL: 1 x headphones; 2 x USB 3.0; 1x microphone PCI PESASID KUNI: 7 Kettasahtlid: 4x 2.5" pesa 3x3.5" Ventilaatoritugi: ÜLESSE PAIGALDATUD - 1x Aspect 12 RGB ETTE PAIGALDATUD -2x Aspect 12 ÜLESSE VÕIMALIK PAIGALDADA 2x120/140 TAHA VÕIMALIK PAIGALDADA 1x120 ETTE VÕIMALIK PAIGALDADA 2x120/140 Radiaatoritugi: ÜLEVAL - 240 mm
Elegant Micro-ATX case by Jonsbo in black, subtle design made of steel, with tempered glass side panel, supports graphics cards up to 330 mm, up to 7x 120 mm fans possible
The SilverStone SST-RM45-360 is a 4U rackmount server chassis with enhanced liquid cooling compatibility. The chassis supports motherboards up to the SSI-EEB standard, 360 mm water cooling radiators, and 8 PCI expansion slots. The chassis features a USB Type-C interface and adaptability for upright or horizontal placement. Type Rack Enclosure Color black EAN 4710679818191 Manufacturer No. SST-RM45-360 Server tower design Mainboard form factor E-ATX, SSI-CEB, SSI-EEB Material steel, 1.0mm ~ 1.2mm Internal dimensions Plug-in card length maximum 340 mm Supported radiators front: 120/240/360 mm. 3.5 inch internal drive bays 8 pieces Slots Full-Size 8 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 3.2 Gen 1 (5 Gbit/s) 3 x 120 mm fans can be installed on the front Rear 2 x 80 mm fans included Notes LED indicators: Power LED x 1: Blue, HDD access x 1: Green, LAN LED x 2: Green. Water cooling possible Yes Rear connection of the mainboard No Additional Information: An internal USB 3 Type-C cable with a total length of 80 cm is included. When connecting external storage devices, it is advisable to avoid using cables that are too long, as excessive cable length may potentially result in a reduction in transfer speed. Note: The total length of 5.25-inch devices and the motherboard is 481 mm. Refer to the manual for a detailed description of the various form factor tolerances of the motherboard if 5.25-inch devices are to be installed within this limitation. Accessories available Accessory box Volume 39 l Dimensions Width: 43.8 cm x Height: 17.6 cm x Depth/Length: 50 cm Weight 10.4 kg
With the Lian Li O11 Dynamic Mini V2 Flow, your gaming setup is sure to stand out: Despite its compact design, this mini case offers a spacious interior with enough room to make your vision a reality. Whether you opt for air cooling, an AiO water cooling system, or vertical GPU installation—this case can handle it all and much more. Compact design: Takes up less space on your desk Room for high-end hardware: Generously designed interior allows the installation of powerful components Clean cable management: Cable holders and support for motherboards with back-connect design for tidy cable routing Includes GPU brackets: Graphics card can be installed vertically or horizontally Dust protection: Easy-to-clean dust filters at multiple locations Five pre-installed fans: Three 120 mm reverse-blade fans at the bottom and two on the side The Lian Li O11 Dynamic Mini V2 Flow: A mini case designed for high-performance gaming hardware Lian Li O11D Mini V2 Flow with sample hardware Featuring tempered glass on the side and front, the Lian Li O11 Dynamic Mini V2 Flow lets you showcase your hardware. Its compact size allows it to sit comfortably on your desk and become the centerpiece of your gaming setup—all without annoying cable clutter inside the case. Clean cable management for a tidy look Lian Li O11D Mini V2 in white with cable straps Thanks to multiple cable holders, the case enables clean cable routing. A built-in bracket for the heavy 24-pin ATX cable ensures it stays neatly in place, while cleverly positioned straps keep all other cables organized. The drive cages can also double as a hiding spot for cables. This makes cable management effortless—perfect for both beginners building their first gaming PC and pros tired of spending hours on cable routing. Flexible installation for motherboards and AiO water coolers A vertically adjustable motherboard standoff offers you more flexibility when installing the motherboard and AiO water coolers. You can choose between two motherboard positions: The top position supports 240 mm and 360 mm AiO liquid coolers, while the bottom position also allows for a 280 mm radiator. Well cooled, even under full load Supports up to nine fans Space for two water cooling radiators Mesh panel on the top Dust filter on the bottom The fans and radiators provide sufficient cooling for your gaming hardware, even under maximum load. A mesh panel and dust filter help reduce dust build-up inside the case, prolonging the life of your components. Lian Li O11D Mini V2 Flow fans The Flow version of the O11D Mini V2 comes with five fans pre-installed. These 120 mm fans feature reverse blades, ensuring a clean look without sacrificing essential airflow. Ready for peak performance with enough space for large GPUs The interior of the tower is designed to accommodate even large graphics cards up to 400 mm in length—whether mounted horizontally or vertically. The included GPU brackets ensure a secure hold in both scenarios, giving you the freedom to choose your preferred GPU orientation. Supports motherboards in Mini-ITX, mATX, and ATX form factors—including models with rear cable management using a back-connect design. Combined with well-thought-out cable holders and Velcro straps, the result is a tidy, clean look with all cables elegantly routed to the back of the motherboard. Modular I/O panel Lian Li O11D Mini V2 I/O panel The I/O panel module can be attached either on the top or at the bottom front. This lets you place the case wherever you want and still have easy access to the button and ports. If you position the panel on the top, the bottom cover is also removable—improving airflow.
The Lian Li Vector V100 combines stylish yet simple design with high compatibility and a special cutout for more individuality. With this desktop case, you get the perfect chassis for your next gaming PC. White midi-tower with tempered glass on the side and front Supports motherboards up to ATX form factor and with back-connect design Optimal cooling with up to nine fans and radiator support up to 360 mm Space for graphics cards up to 415 mm and CPU coolers up to 180 mm in height Four 120 mm fans with RGB lighting included Cutout with removable cover for collectibles The Lian Li Vector V100: midi-tower with a stylish design and plenty of space for hardware Express your personality with the Vector V100. Thanks to tempered glass panels on the side and front, you have an unobstructed view into your tower’s interior, while the LED strips are just the beginning of impressive RGB lighting. Make your build something special Directly behind the front of the V100 case is a cutout. Whether for figures or other collectibles—you can display your interests. If you don't need the cutout, simply cover it with the removable panel. Extensive cooling options Four 120 mm ARGB fans are already pre-installed—three reverse fans on the side and one with standard orientation at the rear. Thanks to their reversed fan blades, the sideways-mounted fans provide efficient airflow—and look just like regular fans. Additional mounting points for more fans are located on the top and bottom. If you prefer water cooling, you can also install a radiator up to 360 mm on the top panel. The dust filter at the bottom is easy to remove, so you can clean it whenever needed. Easy installation of your gaming hardware The Vector V100 offers plenty of space for your components—even high-end hardware. Thanks to support for motherboards with back-connect design and tidy cable management, your build will really stand out.
Black case with a closed side Efficient cooling with up to seven fans and a radiator up to 360mm Support for large motherboards up to E-ATX and back-connect Space for graphics cards up to 415mm and CPU coolers with a height of up to 184mm Up to six drives possible Three M25-120mm fans already included PHANTEKS XT Silent: Compact and simple midi-tower The PHANTEKS XT Silent fits into any setup with its simple black design. It offers extensive options for installing your high-end hardware. To keep your system cool even at full power, there is plenty of space for fans and radiators. Effectively cooled with fans and radiators To ensure your high-end components do not overheat even under full load, up to seven fans can be installed in the midi-tower. The top supports either up to three 120mm or two 140mm fans. Additionally, three more 120mm fans can be installed on the mid-plate. The rear also allows for a 120mm or 140mm fan. Furthermore, three PHANTEKS M25-120mm fans are already included in the package. If you prefer water cooling - whether an all-in-one water cooling system or a custom-built water cooling solution - there are two locations to install a radiator. A maximum 360mm radiator can be mounted at the top, and another 120mm radiator at the rear. With these fan and radiator options, your system will not lose performance. Hardware installation The midi-tower supports the installation of large graphics cards up to 415mm in size. Consequently, the current NVIDIA GPUs of the 40 series are also possible. Motherboards up to E-ATX format can be accommodated. To avoid messy cable clutter, you can also install motherboards with back-connect. The CPU cooler should not exceed a height of 184mm. On the other hand, there are hardly any limits for the power supply, as it can be up to 270mm long. To store programs and games, up to six drives can be installed: up to three 2.5-inch SSDs can be placed on the side, two more in the power supply chamber, as well as one 3.5-inch drive.
Fractal Design Pop Silent - Torn - ATX Product Type: System cabinet Form Factor: Torn Windowed Side Panel: Jah, tempered glass värv: must TG clear tint I/O Ühendusi: 2 x USB 3.0 Audio sisend Audio joon-out Supported Motherboards: ATX, Mini-ATX, Mini-ITX System Cabinet Features: kaabel management system, toetab 120 mm radiator in rear, PSU dust filters, toetab Kuni 280 mm radiator in front panel Power Device: No toiteplokk (ATX) mõõtmed (WxDxH): 21.5 cm x 47.35 cm x 45.4 cm kaal: 7.3 kg Manufacturer Warranty: 2-year garantii
Full mesh construction on the front ensures optimal ventilation The sense of unity between the front mesh and the tempered glass on the side panel creates a unique Zalman design. Exceptional airflow Designed for optimal air intake with a full mesh front panel and pre-installed addressable RGB fans allows for optimal and maximum airflow. High performance addressable RGB fan The mesh front panel and RGB fans provide optimal airflow and stunning RGB lighting effects (supports up to 8 fans). ARGB controller Press the LED I/O button to change the LED pattern and color (26 patterns) Press and hold the LED button for 3 seconds to sync the motherboard after the white light flashes once Press and hold the LED button for 6 seconds to turn off the LED after the white light flashes twice Press the LED button again to disconnect the motherboard sync and change the controller mode Magnetic dust filter Protects components and ensures unobstructed airflow by filtering dust. Bottom dust filter Protects the power supply from dust accumulation. Easy-to-use hinged glass side panel A hinged glass panel provides easy access to the interior.
Spacious Micro-ATX case in white, for motherboards up to Micro-ATX, side panel made of Tempered Glass, up to 11x 120-mm fans possible, 2x radiators up to 360 mm possible, graphics cards up to 400 mm in length, dual-chamber design.
The 3U rackmount server case SST-RM31 is designed for demanding computing environments, combining high compatibility, flexible power supply options, and exceptionally strong cooling performance. It supports motherboards up to the SSI-EEB form factor, making it suitable for both standard ATX and E-ATX platforms as well as professional server boards. For power supply, the case offers a choice between two SFX-L power supplies or redundant 2U-CRPS units, making it ideal for mission-critical systems where high availability is crucial. Inside, there is ample space for up to eight full-height PCI expansion cards, allowing for extensive GPU, network, or storage configurations without compromise. For efficient cooling, the case supports 360 mm water cooling radiators, which can be operated with up to six 120 mm fans in a push-pull configuration. Alternatively, CPU air coolers up to 110 mm in height can be installed, allowing for classic cooling solutions without limitations. The case is rounded out by modern connectivity, including an integrated USB Type-C port on the front, providing quick access to current devices and storage media. Overall, this server case offers an ideal foundation for high-performance workstations, virtualization servers, storage-intensive applications, or compact compute clusters that require both expandability and maximum cooling performance.
Midi-tower case with four pre-installed D-RGB fans 360mm radiator support at the top for optimal cooling performance Compatible with ASUS BTF and MSI Project Zero motherboards Tempered glass side window for an unobstructed view of your components Glacier One 360M25 Gen2 with powerful pump and RGB lighting Three quiet M25-G2 fans with high static pressure Integrated VRM fan on the pump cover High-quality build and optimized airflow Optimal Cooling Meets Stylish Design The XT Pro Ultra offers space for up to ten fans and supports radiators up to 360mm at the top. With four pre-installed 140mm D-RGB fans, it provides excellent airflow right out of the box. The mesh front panel and tempered glass side panel combine functionality with aesthetics. The Glacier One 360M25 Gen2 AiO cooler delivers excellent cooling performance thanks to its powerful pump and three optimized 120mm PWM fans—ideal for high-end Intel and AMD CPUs. Integrated D-RGB lighting ensures a clean yet spectacular look. Room for High-End Components The XT Pro Ultra provides space for graphics cards up to 415mm in length and CPU coolers up to 184mm in height. The case is also ready for vertical GPU mounting and offers enough space for 2x 3.5" and 5x 2.5" drives. ATX and even E-ATX motherboards fit easily as well. Cable-Friendly, Modern Setup Thanks to support for rear-connector motherboards like ASUS BTF and MSI Project Zero, your system can be especially tidy. The Glacier One 360M25 Gen2 supports you with a single control cable for RGB lighting—for a clean build without cable clutter. Quiet & Powerful: The M25-Gen2 Fans The M25-Gen2 fans are designed for radiators and deliver high cooling performance at an ultra-quiet 35.13 dB(A)—with an airflow of 123.55 m³/h and a static pressure of 2.51 mmH2O. Rubber pads prevent disturbing vibrations and the PWM mode automatically adjusts the speed to requirements. With the Phanteks XT Pro Ultra & Glacier One 360M25 Gen2 bundle, you get a perfectly matched combination of case and water cooling, merging performance, cooling, and design at the highest level.
The SilverStone RM4A 4U Rackmount Chassis sets new standards in flexibility for workstation and server configurations, offering support for everything from compact Mini-ITX boards to full-size SSI-EEB motherboards. With eight full-height expansion slots and a removable expansion card bracket, it's built to easily accommodate high-performance components - no sagging, no strain, just solid support for multi-GPU setups or demanding expansion needs. Excellent temperature control is the strength of the RM4A. The front panel offers space for a 360 mm radiator, enabling the use of highly efficient liquid cooling systems for CPUs or GPUs. Complemented by two 80 mm fans on the back, the case offers a consistent airflow to all important components, ensuring reliable cooling even under continuous load. Rack type, server enclosure Color black EAN 4710679819501 Manufacturer no. SST-RM4A Made in China Rack design Mainboard form factor ATX, E-ATX, µATX, Mini-ITX, SSI-CEB, SSI-EEB Material steel Internal dimensions Plug-in card length maximum 424 mm Internal dimensions CPU cooler height maximum 148 mm Internal dimensions power supply form factor ATX Internal dimensions Power supply length maximum 255 mm Internal dimensions height units 4 U Drive bays 3.5 inches internal Drive bays 2.5 inches internal Drive bays 2.5 in 3.5 inches internal Slots full size 8 pieces Front ports 2x USB-A 3.2 Gen 1 (5 Gbit/s), 1x USB-C 2.0 (480 Mbit/s) The designation USB 3.2 Gen 1 corresponds to the previous designation USB 3.1 Gen 1 / USB 3.0. Front 3 x 120 mm fans can be installed, or a 360 mm radiator 2 x 80 mm fans can be installed on the back Water cooling possible Yes Water cooling possible. Supported radiators front: 360 mm Rear connection of the mainboard No Volume 35 l Dimensions Width: 44 cm x Height: 17.6 cm x Depth/Length: 44.6 cm Weight 7.6kg
Automatic RGB fan Equipped with top-quality system fans that cool the system and maximize its performance. System fan included The kit includes top-quality system fans that cool your system and ensure maximum performance Magnetic filter The magnetic dust filter on the top is designed to provide users with the best disassembly and cleaning experience. Optimized air flow This case supports the installation of up to 7 system fans and ensures ventilation of the entire system for better stability. Tempered glass The highest quality tempered glass, 4 mm thick, guarantees window durability and good visibility.
The Chieftec Pro Mini AZ-01B-OP mini-tower chassis is a compact yet versatile solution for building high-performance systems. It supports mini ATX and microATX motherboards, offering flexibility for various system builds. The chassis includes a comprehensive cooling system with a rear 120 mm fan or radiator, front and top fan mounts capable of supporting up to 280 mm radiators, and additional mounts on the PSU shroud, ensuring optimal airflow and cooling efficiency. For those seeking a quieter computing experience, the Chieftec Pro Mini features sound dampening panels on the front and sides to minimize noise. Additionally, the front panel is equipped with USB-C, USB 3.0, and USB 2.0 ports, along with audio line-out and microphone jacks, providing convenient connectivity options. With its sleek design, efficient cooling, and quiet operation, the Chieftec Pro Mini AZ-01B-OP is an excellent choice for users looking to build a compact, powerful, and versatile system.
ROG Strix Helios II ROG Strix Helios II EATX mid-tower gaming case with dual tempered glass side panels, GPU support for up to 450mm in length, aluminum frame and front panel, GPU braces and 420mm radiator support Premium design: The Helios II is made for showcase builds, with aluminum front panel featuring diamond-grille design and 3D-structured filter to support effective cooling Optimal thermal performance: Pre-installed four 140 x 28mm performance fans deliver ultimate airflow Ready for the DIY experience: PC building is made easy with support for EATX motherboards and graphics cards up to 450mm long, plus a graphics card slot clamp and a rear detachable PSU bracket Tidy PC building: Effortless cable management is enabled by a multifunction cover with graphics card holders, a PSU shroud, a cable cover and rear cable clips Advanced I/O panel: This section features two USB 20Gbps Type-C® ports, four USB-A 3.0 ports, an ARGB-lighting control button and a fan-speed PWM control button Comfortable case straps: Easily carry your prized build to LAN parties with ergonomic and stylish X-shaped woven straps
GIGABYTE C301 GLASS V2 - Optimized Airflow Design - RGB Fusion with ARGB Connector Hub - Support Motherboards up to E-ATX - Up to 360mm Liquid Cooling Compatible - Support Vertical GPU Installation - Full-Size Tempered Glass Side Panel - With USB 3.0 x2 and USB 3.1 Type-C x1 on I/O panel - Pre-installed 4 ARGB fans
Compact dual-chamber midi tower, developed by Lian Li and PCMR, three sides with seamless tempered glass, alternative case lid for better cooling, supports 3x 360-mm radiators simultaneously, up to 11x 120-mm fans, 1x USB-C 3.1 and 2x USB-A 3.0 in the front panel
VALOR AIR PLUS MID-TOWER CHASSIS VALOR AIR PLUS ENDLESS POSSIBILITIES XPG VALOR AIR PLUS mid-tower PC chassis offers a robust platform for future upgrades, accommodating mid-to-high-end components, including most RTX 40 series GPUs. Its high-airflow magnetic front panel enhances visual appeal, especially with ARGB fans, while ensuring superior ventilation. With 4x pre-installed 120mm ARGB fans included in select models, it delivers optimal cooling performance right out of the box.
