Joby GorillaPod 1K Kit. Otstarve: Digitaalne/filmikaamera, Maksimaalne kaal (mahutavus): 1 kg, Jalgade arv: 3 jalg(ad). Laius: 55 mm, Sügavus: 50 mm, Kõrgus: 260 mm
Designed for Nikon Z 8 and to protect the camera and attach accessories. The cage gives full access to buttons, card slots, battery door, and the flip screen. SmallRig 3982 Cage for Nikon Z 8 with MB-N12 Battery Grip It locks the camera via one bottom 1/4"-20 screw and one M2.5 screw on both sides, and have rubber pads which preventing scratches There is many accessory mounting points; 1/4"-20 & 3/8"-16 threaded hole and ARRI 3/8"-16 locating hole which can support SmallRig Top Handle 2165 & 1638, Side Handle 2093 & 2425, Monitor Mount 2903 & 2904 and Magic Arm 3875 Two cold shoe mounts fit a microphone and LED video light The Arca Swiss quick-release bottom plate and side plate enable horizontal and vertical shooting on tripods. The bottom Arca-Swiss quick-release plate also supports DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between handheld, gimbal, and tripod modes. At the front end, there are two 1/4"-20 threaded holes for SmallRig Dual 15mm Rod Clamp 942, matte box and lens support One 1/4"-20 locating hole for SmallRig Single Rod Clamp 3276 for follow focus. Besides, a magnetic double-ended wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 with MB-N12 Battery Grip Packaging includes: 1x Cage
Non-reflecting matt gray base board with printed fine grid. Feet adjustable in height. Spirit level in column base. Extra-wide and extremely vibration-resistant column of dull black anodized aluminium tubing with cm and inch scales. Hand crank-operated height adjustment by friction drive on plastic bearings. Weight compensation by roll-off spring mechanism. Column can be mounted rotated 180°. Base board: approx. 450 x 500 x 28 mm (17.7 x 19.7 x 1.1 in.). Column height: approx. 1000 mm (39.4 in.).
Cullmann Alpha 2800Einsteiger-Stativ mit Kurbelsäule, 3-Wege-Kopf und Kameraschnellkupplungs-System. Exzellentes Preis-/Leistungsverhältnis inklusive Stativ-Etui.Das Universalstativ ALPHA 2800 überzeugt durch eloxiertes Aluminiumrohr für Stativbeine und Kurbelsäule, durch eine zuverlässige Stativbeinklemmung und durch einen kompakten 3-Weg-Panoramakopf mit Schnellkupplungssystem. Für den sicheren Transport des ALPHA 2800 gehört ein gepolstertes Stativetui zum Lieferumfang. Type of Tripod Tripod Material Aluminium Max. Weight Capacity (kg) 2,5 Max. Working Height (cm) 184,5 Max. Height without Pull-Out Drawers 150,0 Min. Working Height (cm) 67,5 Number of Segments 3 Folded Height (cm) 70,0 Colour Aluminium / Black Weight (kg) 1,25
Kõrgtaseme ABS GorillaPod statiiv, mis sobib suurepäraselt hübriidkaameratele ja teistele kuni 1 kg kaaluvatele seadmetele. GorillaPod 1K on truu kaaslane nii foto- kui videograafile ja vloggerile – kasuta seda käsistatiivina, mässi selle painduvad jalad mis tahes toru ümber või kasuta traditsioonilise statiivina. Paindlik – painuta, mässi, pane püsti – valik on Sinu. Mitmekülgne – sobib hübriidkaameratele, välgupeadele, videovalgustitele või mis tahes seadmele, mis on varustatud 1/4" kinnitusega ning mille kaal ei ületa 1 kg. Kaasaskantav – GorillaPodi kompaktne ja kerge disain võimaldab selle pista tasku või poetada käekotti. Tugev – kannab kuni 1 kg suurust raskust. Stabiilne – kummeeritud detailid ja jalaotsad lisavad stabiilsust ka konarlikematel pindadel. Vastupidav – GorillaPodi loomiseks testiti üle 100 plastikühendi, et leida usaldusväärseim ja optimaalseim materjal
Stabilisaator sujuvaks ja värinavabaks kaameratööks; Võimaldab salvestada nii maastiku- kui portreeasendis; Värviline 1,4" LCD ekraan & Bluetooth ühendus; Toetab kuni 2-kilost raskust, kaaludes vaid 795 g; Aku kestab kuni ...
Multifunktsionaalne statiiv; Kasuta käsistatiivi, käepideme või lauastatiivina; Ühildub nii kompaktkaamerate kui nutitelefonidega; Sobib kasutamiseks kuni 350 g seadmetega; Kerge ja kompaktne disain
Designed to facilitate camera movement and stabilize dual-handed shooting while providing basic mounting points. The highly versatile handle adopts the ARCA-Swiss Type interface and is compatible with the built-in ARCA-Swiss mount plate, cages, L-Bracket, Rotatable Horizontal-to-Vertical Mount Plate, etc. SmallRig 4416 Side Handle ARCA-Type Features ergonomic design, which allows to use of the left & right hand interchangeably to provide a comfortable grip. According to the actual camera size, the handle can be adjusted 36mm vertically to ensure the best grip position. Mainly made of high-strength aluminum alloy, and the stretchable mounting points (1/4"-20 locating holes and ARRI 3/8"-16 locating holes) are made of stainless steel material. Features silicon pads on the contact surface with the palm, which are anti-freeze and anti-slip. Comes with 1/4"-20 threaded hole, 1/4"-20 locating hole, strap hole, cold shoe for attaching SmallRig Monitor Mount 2905, Ballhead Magic Arm 3875, LED Video Light 3286, Microphone 3468, etc. Besides, a built-in magnetic Allen Wrench is included for easy mounting and adjusting accessories. Compatibility: ARCA-Swiss mount plate, cages, L-Bracket, Rotatable Horizontal-to-Vertical Mount Plate, etc. Pacakge includes: 1x Handle 1x Handle Adapter
The MAGNESIT COPTER links both worlds - the worlds of photography and of videography. The MAGNESIT COPTER is therefore fully geared up for DSLR cameras with additional video function. With the tripod legs folded in, the sturdy multi-function tripod in combination with the ball head CB2.7 is perfectly suitable as video hand support.Ideal for photography and videographyEspecially for all DSLR cameras with video functionSturdy and light-weight multi-function tripodCompletely made of aluminiumSmall packing dimension (22 cm) and weight (250 gramme)Including aluminium ball head with adapter plate (1/4" - hot shoe) Type of Tripod Table Tripod Material Aluminium Max. Weight Capacity (kg) 1,0 Max. Working Height (cm) 16,0 Min. Working Height (cm) 16,0 Folded Height (cm) 22,0 Colour Black Weight (kg) 0,250
Novoflex TrioPod tripod baseTripod base, singleDelivery without legsWeight: 315 g (0.69 lbs) Type of Tripod QuadroPod System Colour Black Weight (kg) 0,315
MTALUVR VR statiiv on truuks kaaslaseks kõigile 360° foto- ja videograafidele. Selle minimalistlik disain ühendab endas töökindluse ja stabiilsuse. Statiivil on M-lock süsteemiga alumiiniumist jalad, mille keeratav mehhanism teeb jalgade lukustamise imelihtsaks. M-lock lukustuse avamiseks ja sulgemiseks piisab vaid kergest 90° pöördest, mis teeb statiivi üles seadmise mugavaks ja kiireks. Lisaks saab statiivijalgu eraldiseisvalt seadistada nelja nurga alla ning see võimaldab rohkelt kohandamisvõimalusi ning suurendab stabiilsust. MTALUVR sobib suurepäraselt kasutamiseks koos MBOOMAVR poomiga (ei kuulu komplekti), mille kinnitamiseks on statiiviga kaasas spetsiaalselt disainitud alumiiniumist adapter, et tagada maksimaalne stabiilsus, isegi kui kaamera on mitmeid meetreid maapinnast kõrgemal.
Nest WT-3110A on kvaliteetne statiiv, millel on oma koht igaühe kaameravarustuses. Tänu kergele kaalule ja kompaktsele suurusele on statiivi hõlbus kaasasolevas statiivikotis transportida. Selle alumiiniumist jalad tagavad stabiilse ja usaldusväärse töö. Statiiv kaalub vaid 420 grammi, kuid suudab kanda kuni 2,5 kg raskust – ideaalne nii kompakt-, hübriid-, peegel- kui videokaameratele. Maksimaalselt kõrgub see 1,02 meetri kõrgusele ning minimaalseks töökõrguseks on 34,5 cm.
BIG T-1271 on kolmesuunalise pea ja kiirkinnitusplaadiga universaalne statiiv, mis ei löö eelarvet lõhki. Kiirklambritega kinnitatavad jalad võimaldavad statiivi kiirelt üles seada ning lisaraskuse konks kesksamba otsas lisab statiivile stabiilsust.
Ühenda enda kaamera Syrp Genie motoriseeritud statiivipeaga. Sobib järgnevatele Canon kaameratele: 10D 1D / 1D C / 1D Mark II / 1D Mark II N / 1D Mark III / 1D Mark IV / 1D X / 1Ds / 1Ds Mark II / 1Ds Mark III 20D / 20Da 30D 40D 50D 5D / 5D Mark II / 5D Mark III 6D 7D / 7D Mark II
Manfrotto Element Traveller. Otstarve: Digitaalne/filmikaamera, Maksimaalne kaal (mahutavus): 4 kg, Jalgade arv: 3 jalg(ad). Kaal: 1,05 kg, Pikkus kokkuvolditud kujul: 32 cm, Jala läbimõõt: 3,7 cm
Kerge ühe hoova ja kiirkinnitusplaadiga vedelikpea sobib kuni 4 kg raskuse kaamera kandmiseks. Videopead on vedelikmehhanismiga, et saavutada maksimaalselt pehme ning vibratsioonivaba liikumine. Pea juhtimiseks on pikendatud juhthoob, tagamaks võimalikult täpne kontroll kaamera liikumise üle. Lisaks on videopeal eraldi lukustusmehhanism pöörlemise ja kalde jaoks.
See kerge videokomplekt koosneb stabiilsest MVT502AM alumiiniumstatiivist ning ülisujuvast MVH500A videopeast (60mm kinnitusega). Videopea on laiema profiiliga ning kiirkinnitusplaadi asukoht on nihutatav. Tänu sellele sobib ...
ZHIYUN Smooth Q3. The new three-axis gimbal is an enhanced gimbal with a unique new compact and lightweight design. New functionality, including enhanced lighting features and smart templates, ensures more creative shooting possibilities, while a better button layout and design simplify user experience, all at a highly competitive price. Despite being smaller and more compact it can still take a bigger payload than previous model, the Q2. The new Smooth Q3 is 20% lighter but can still take a bigger payload. The gimbal is compatible with most premium smartphones out on the market even with a bumper attached. The adjustable holder can be set to a maximum width of 90 mm. A new intuitive button layout leads to overall smoother operation. For example, by triple tapping the trigger switching between portrait and landscape modes could not be easier, while ultra-wide-angle shooting means that vast landscapes are just as easy to capture as low-angle shots. On the top of the gimbal you find a 180 °Rotatable fill light with touch button that adds an extra light to your videos. The light can be set in three different strengths. The gimbal not only provides better video recordings with a smoother and more professional look. It also adds lots of creative possibilities in filmmaking with 17 SmartMode built-in templates, speeding up creation of videos that are shot on a regular basis. With the ZY Cami Editor, users can spice up videos with customised templates adding an array of music, special effects and filters. Additional new features include gesture control, SmartFollow 3.0 Object Tracking, an instant Dolly Zoom, and MagicClone Pano which is operated by a single press trigger button to mark the target and activate smart following. With the new gimbal Zhiyun also introduces ZY Prime, a subscription where members get access to more features such as more shooting templates and ZY Remo remote control feature that lets a second device control the smartphone on the gimbal. Key specifications New compact design Better grip, single hand control Better payload Easy to fold Creative templates Extra light
Zhiyun toob Weebill seeriasse uue stabilisaatori ja lisab täiesti uue edastusmooduli professionaalseks videotööks. Weebill S on disainitud tööks enamlevinud peeglivabade ja peegelkaameratega. WELLBILL-S kasutab uut adaptiivset kontrollalgoritmi, mis tunneb ära kasutatava kaamerakomplekti kaalu ja seadistab stabiliseerimismootorid optimaalseimaks tööks teie kaamerakomplektiga. Loomulikult on teil lisaks võimalik seadistada eraldi iga telje reaktsioonikiirust sobivaks teie võtteolukorraga. 300% suurema pöördemomendiga mootorid ja 50% lühem reaktsiooniaeg Võimalik kasutada mõlemas asendis – traditsioonilises vertikaalses ja pööratult madalate võttenurkade korral On võimalik eemalt juhtida Kiire ja lihtne tasakaalustamine Kahepoolne Arca-Swiss ja Manfrotto süsteemiga ühilduv kiirkinnitusplaat Intuitiivne juhtimine tänu OLED ekraanile, otsevaliku nuppudele ja kontrollrattale. Go mode kiirete liikumiste jäädvustamiseks Võimalus kasutada nutiseadet liikumisandurina Kasutusvõimalused avardatavad ZY Play nutirakenduse ja videosignaali edastuskomplekti abil Kuni 14 tundi kasutusaega ühe laadimisega USB-laadimist toetavale kaamerale saate vajadusel anda stabilisaatori akudelt lisatoidet Esimestena püüavad uue Weebill-S juures tähelepanu 300% suurendatud mootorite jõudlus ja 50% lühendatud reaktsiooniaeg. Stabilisaator töötab väga hästi näiteks selliste kaamerakomplektidega, nagu Sony A7III+FE 24-70mm F2.8 või Canon 5D4+EF 24-70mm F2.8. WEEBILL-S unikaalne sling mode võimaldab teil kiirelt ja ergonoomiliselt liikuda kõrgelt võttepositsioonilt madalale võttenurgale, kui kasutate TransMount komplekti. Uus mootorite juhtimise algoritm võimaldab stabilisaatoril määrata automaatselt kasutatava kaamerakomplekti kaalu ning seadistada seadme mootorid optimaalseks tööks. Täiesti uus TransMount Image Transmission Module Uus videoedastusmoodul võimaldab kristallselge 1080p / 30fps pildi edastust kuni 100 meetri kaugusele koos LUT, pseudo coloring, focus peak ja zebra adjustment võimalustega professionaalseks salvest
Ette nähtud: Foto- ja videokaamerate jaoks; Pikkus kokkupandud kujul (cm): 44; Maksimaalne pikkus lahtivõetud kujul (cm): 165; Reguleeritava kõrgusega kesksammas: On; Jalgade läbimõõt (cm): Pole infot; Jalgade kummitallad: On; Sisseehitatud tase:...
Ebatraditsionaalne lahendus on osutunud üllatavalt efektiivseks ja lihtsalt kasutatavaks. Fig Rig ühendab kaamera operaatoriga, muutes nad üheks. Eelkõige tuleb selle eelis välja liikuvaid videolõike tehes, kus on vaja kiiresti ...
Designed to provide accessory mounts and protection for the Nikon Z9 camera. The cage secures to the camera with one 1/4´´-20 screw & locating pin at the bottom and the right side shoulder strap hole. Featuring multiple 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes, support SmallRig Top Handle 2165, Side Handle 2093, 2624, and Monitor Mount 2903. Comes with a cold shoe on the top to attach microphones, LED lights, etc. The bottom integrates an Arca Swiss plate that allows switching directly to tripod shooting and features multiple 1/4´´-20 threaded holes allowing for mounting DJI RS 2/RSC 2 Quick Release Plate (Upper) with two 1/4” screws. The front of the cage features two 1/4´´-20 threaded holes for Smallrig 15mm Rod Clamp 942 that supports lens support, follow focus, matte box, etc. The cage features all-around protective rubber pads inside to prevent scratches and a built-in magnetic slotted screwdriver & Allen Wrench that is easy to use. Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 8 x M3 Screw
Designed for Nikon Z 8 to facilitate a switch between horizontal and vertical modes and to improve grip experience. SmallRig 3942 L-Shape Mount Plate For Nikon Z 8 It locks the camera via one 1/4 "-20 screw at the bottom and one locating pin, with rub pads preventing scratches, and has a hinge arm at the battery door that fits the camera curve to enhance grip. There are multiple accessory mounts: An Arca Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals 1/4"-20 & 3/8"-16 threaded holes at the bottom that support SmallRig Side Handle 2093 & 3847, Quick Release Plate 1280 Strap holes for SmallRig Hand Strap 3848 & 2456. The L-Bracket also features a QD mount to attach the QD strap buckle, 1/4"-20 threaded holes, suitable for SmallRig Cold Shoe Mount 2736 for the microphone, as well as a 23mm stretchable side plate that allows cables through in vertical shooting. Besides, a magnetic wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 Packaging includes: 1x L-Shape Mount Plate 1x Allen Wrench
Tailored for mobile shooting, elevating stability for handheld shooting and offering essential mounting options. The handle features two 1/4"-20 threaded holes with an 18mm spacing, ensuring broad compatibility. SmallRig 4755 Lightweight Mini Side Handle Its ergonomic bilateral design enables seamless interchangeability between the left and right sides without the need to reassemble the handle adapter, enhancing the shooting experience with comfort. Featuring a 30mm adjustable handle grip positioning, users can customize the optimal handling based on the device´s dimensions. Equipped with 1/4"-20 threaded holes and positioning holes, the handle supports attaching accessories. Additionally, it features a built-in cold shoe mount to expand with accessories like SmallRig LED Video Light 3286 and On-Camera Microphone 3468. Despite its compact and lightweight design at only 116g, the handle can support up to 5kg. The integrated magnetic Allen wrench facilitates the adjustment and mounting of accessories for seamless operation. Compability: Two 1/4"-20 threaded holes with a spacing of 18mm Packaging includes: 1x Handle 1x Handle Adapter
Ideal for on the go, for rough terrain and for all places where tripods cannot be used for reasons of space, suitable for photo and video cameras. The 3D tilt head allows perfect alignment for landscape and portrait shots. Quick-release plate for quickly changing the camera. Flexible rubber foot for a firm grip on uneven surfaces and for easy camera alignment in different positions. With the functional quick-action leg locks the leg of the monopod can easily and quickly be fixed at the required height or position. Spirit level integrated into the monopod head. The non-slip, rubber-coated handle allows you to use the monopod in all weathers. Spare quick release plate: Hama item no. 00004154.
Cullmann statiivipea Ball Head CB 2.7 koos CX 697 hot shoe kinnitsupuksiga, Adapter kinnitusplaat koos 1/4-tolli kaamerakruvi ja hot shoe puksiga, Sobivus: kompaktkaamerad ja välklambid ning mikrofonid
Operating height (max): 1060 Length of the complex stand: 360 Load (max): 2 Weight: 500 Other features: - Three directional head with a leveler.- Quick-release connector, 3 parts- Telescopic aluminum feet- Easy and quick camera mounting- Rubberized feet- 1/4" screw fitting for most Cameras and Camcorders
Võimaldab 3-teljelist kaamera juhtimist kuni 100 m kaablil Salvesta imelisi time lapse videosid Mugavad kaamera kiirkinnitused Toimimiseks vajalik Syrp Genie motoriseeritud statiivipea Kandevõime kuni 8 kg Kogu komplekt mahub mugavalt ühte seljakotti Komplektis 2 × 25 meetrit kaablit, võimalik juurde osta
Suction with Ball head The suction pod (SP) is equipped with 1/4 thread and is ideal for use on any plane surfaces like i.e. glass.Compact and stable small head with plate; load capacity up to 3 kg (6.6 lbs). Type of Tripod Suction Pod Material Plastic Max. Weight Capacity (kg) 3,0 Colour Black / Blue
