Designed to provide accessory mounts and protection for the Nikon Z9 camera. The cage secures to the camera with one 1/4´´-20 screw & locating pin at the bottom and the right side shoulder strap hole. Featuring multiple 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes, support SmallRig Top Handle 2165, Side Handle 2093, 2624, and Monitor Mount 2903. Comes with a cold shoe on the top to attach microphones, LED lights, etc. The bottom integrates an Arca Swiss plate that allows switching directly to tripod shooting and features multiple 1/4´´-20 threaded holes allowing for mounting DJI RS 2/RSC 2 Quick Release Plate (Upper) with two 1/4” screws. The front of the cage features two 1/4´´-20 threaded holes for Smallrig 15mm Rod Clamp 942 that supports lens support, follow focus, matte box, etc. The cage features all-around protective rubber pads inside to prevent scratches and a built-in magnetic slotted screwdriver & Allen Wrench that is easy to use. Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 8 x M3 Screw
Designed to provide the handheld solution, accessory attachment, and protection for the camera, and particularly during low-angle shooting, ease burdens on the arm and assist in camera movements. The kit comes with a Cage for Nikon Z9 (3195) and an ARRI Top Handle (2165) and maintains access to buttons, holes, card slots, battery door, and flip screen after installation. SmallRig 3738 Cage Kit For Nikon Z9 The cage is locked via a 1/4´´-20 screw at the bottom, locating pin and the shoulder strap ring on the right side. The top handle is ergonomically designed to increase comfort and allows quick assembly and disassembly. Built-in mounting points are fully compatible with the SmallRig accessory system. Featuring 1/4´´-20 threaded holes and ARRI 3/8"-16 locating holes for SmallRig Side Handle 2093 or 2426 for side handheld shooting and camera movements, and ARRI 3/8"-16 locating hole on the top of the handle for Monitor Mount 2903 and a cold shoe mount for microphones, LED lights. Arca quick release plate on the bottom of the cage fits directly on to a tripod for tripod shooting. Two 1/4´´-20 threaded holes at the bottom of the front, support SmallRig Rod Clamp 942 for attach 15mm rail support system to attach lens support, follow focus, matte box, etc. Besides, comes with protective cushions inside to prevent scratches and provides a built-in magnetic spanner for easy access. Compatibility: Nikon Z9 Note: Please remove the shoulder strap ring on the right side before attaching the cage. The cage is not compatible with Nikon WR-R11 remote controller. Package Includes: 1 x Cage 3195 8 x M3 Screw 1 x Top Handle 2165
Designed for quick switch between horizontal and vertical shooting. SmallRig 3714 L-Bracket For Nikon Z9 It is locked into the bottom of a camera via a 1/4"-20 screw and an anti-twist screw, fitted with a silicone pad to prevent scratches and deflection, and can be disassembled into an Arca-compatible base plate (used separately) and side plate, both with lens center mark. The L-Bracket does not block ports, buttons, card slot, battery door, and 4-axis tilting LCD screen. The base plate features mounting points such as 1/4”-20, 3/8"-16 threaded holes and wrist strap support to attach SmallRig Quick Release Plate 1280 and the quick-release plate (pad) of DJI RS 2/RSC 2 stabilizers to realize quick switching multiple scenes such as tripod and stabilizer. Extendable side plate featuring two 1/4"-20 threaded holes supports SmallRig Cold Shoe Mount 1593 and 2736 to attach microphone and leaves room for HDMI and USB cables. In addition, a slotted screwdriver is accessible for easy disassembly and assembly. Note: To stretch the L-Bracket, you need to remove an anti-twist screw with the built-in flat-head spanner; Compatibility: Nikon Z 9 Includes: 1 x base plate 1 x side plate 2 x M4 screws 1 x Allen Wrench
Content creation today is all about flexibility, portability and finding a unique look. The new Crane M2S from the world’s leading gimbal brand, Zhiyun, embodies just that. Whether you are filming Reels with a smartphone, skiing with an action camera or shooting a YouTube video with a mirrorless camera, the new Zhiyun Crane M2S is a gimbal for you Zhiyun Crane M2S Combo At just 549g, the Crane M2S is highly portable, just like a phone gimbal, but with the capacity to hold mirrorless cameras like the Sony A7SIII with small prime lenses. Compared to the standard Crane-M2 series the new gimbal has a super lightweight body combined with stronger motors and extended axes, making it a must-have for run-and-gun filmmakers and content creators on the go. Another new feature is an ultra-bright light built into the gimbal. Using a lumen amplifier technology, it can produce over 1000 lumens brightness within 2.8 m², ideal for capturing subjects directly in shot. The light has a color temperature of 5500K and a CRI of 90+. The Light has five levels of adjustability and comes with four attachable color filters, that gives the user a more creative potential and control. The Crane M2S features the latest quick-release technology previously only used in its flagship gimbals, the V-shape design of the quick-release provides better working efficiency, while dual safety locks ensures that the equipment always remains attached when you need it to. A compact and flexible design with intuitive controls makes the gimbal very easy to handle in all situations. A 0.66-inch display offers real-time status and operating parameters of both the camera and gimbal. The M2S supports USB PD fast charging up to 12W via its USB-C connector, a full charge time can be achieved in just 100 mins, allowing the Crane M2S run for up to 10 hours (depending on setting). Supported cameras can be directly connected via USB-C cable to engage direct shutter control and supply up to 5V/1A of power directly to the camera, extending its battery life. Key specifications: Super lightweight body (549g) Compact Stronger motors and extended axes. Ultra-bright light built into the gimbal. Various shooting modes available: Pan Follow, Follow, Lock, POV, Vortex, Go, etc. Zhiyuns’s Quick Release 4.0 technology. Supports USB PD fast charging Can power a compatible camera via USB-C What´s in the bag: Zhiyun Crane M2S Tripod (M2) Fill Light Filters Phone Clamp（M2） Carrying Bag TypeC to Micro Camera Charging Cable TypeC to TypeC Camera Charging Cable TypeC to USB Cable
Multifunktsionaalne statiiv; Kasuta käsistatiivi, käepideme või lauastatiivina; Ühildub nii kompaktkaamerate kui nutitelefonidega; Sobib kasutamiseks kuni 350 g seadmetega; Kerge ja kompaktne disain
Looking for a compact travel-friendly tripod for everyday use? Then you need Billy 2.0. Perfect for travel and landscape photography Made from 8 layers of 100% pure Carbon Fibre Supports up to 18kg Billy 2.0 is constructed from 8 layers of 100% pure carbon fibre and is one of the lightest tripods in the Punks 2.0 range. Billy 2.0 is built to withstand the rigours of everyday use. Planes, Trains and Automobiles Billy 2.0 is incredibly versatile, designed for all types of photography and an ideal choice for travel, weighing in at just 1.57 kg / 3.46lbs and folding down to 45.7cm / 17.9”. Billy 2.0 is your ideal companion for photography on-the-go. Incredible range Extending to 1.66m/ 65.3” and getting as low as 11.8 cm /4.6”, Billy has a wide range of working heights and can support up to 18 kg / 40 lbs. Jaw-Dropping Like our other Punks 2.0 tripods, Billy 2.0 has three detachable tripod legs which allow for a plethora of configurations including use as a monopod or boom arm as well as a tаble-top tripod (with use of additional footwear). Travel Ready Billy 2.0´s legs counterfold around the column and head, enabling the user to get him down to just 11.8cm / 4.6". 3 Detachable Legs Like their Pro Range 2.0 and Legends Range counterparts, the new Punks 2.0 tripods boast three detachable legs, enabling conversion to monopods or booms, and with the addition of optional Vanz tripod feet (sold separately) can be made into tаbletop tripods. Max Load to Weight Ratio of 10:1 Billy 2.0 is capable of supporting loads up to 10 times his weight. With an 18kg payload, Billy 2.0 is one of the strongest tripods in this class. Locked and Loaded We’ve given our leg locks a face lift. With a fierce new look they boast improved grip and leverage due to a combination of rubber pads and knurling. We´ve added weight to our leg locks lowering their centre of gravity which makes the tripod more stаble to allow use in a multitude of conditions. Shaping The Future Our patented Tri-Mount plate has been refined and offers three hollowed spurs for accessory attachments, and enables Billy 2.0 to fold up, even when the column is detached. A Range of Footwear Billy 2.0 has detachable rubber Bootz, which can be replaced with any of our foot accessories, for maximum stability on any terrain.
SmallRig Dummy Battery EN-EL15 3247 Key Features: 1. Stable and reliable power supply. 2. Easy to disassemble. 3. Universal standard DC5521 port. SmallRig Dummy Battery EN-EL15 3247 is an accessory designed to complete power supply system and provide users with easy and quick access to the external power supply to extend shooting time and focus on video creation; it has a total length of 600mm and delivers stable 7.4V output through the 5.5 / 2.1mm DC output port. It can be easily and quickly installed in the camera battery door and used for a continuous and stable power supply for the Nikon camera. Note: 1. Please plug the cable into the 7.4V 5.5 / 2.1mm DC output port. Compatibility: 1:Dummy Battery:EN-EL15 Camera: D500, D600, D610, D750, D780, D800, D810, D850, D7000, D7100, D7200, D7500, Z 5, Z6, Z6II, Z7, Z7II 2: Power supply with 7.4V 5.5 / 2.1mm DC output port Package Includes: 1 x EN-EL15 Cable Product Dimensions: 600 x 39.4 x 19.98mm Package Dimensions: 106x 99 x 33mm Net Weight: 29g±5g Package Weight: 79g±5g Material: ABS+PC(Shell)+PVC(Cable)
A universal handle with cold shoe, simple and ergonomically designed to offer a comfortable handheld shooting experience. SmallRig 2094 Cold Shoe Handle Its ARRI mount in the front works with SmallRig 2348 Swivel and Tilt Monitor Mount with Arri Locating Pins, and improves the compatibility of the cages. Its cold shoe mounts on the front end with Anti-off Button, allow for quick assembly and disassembly and prevent accidental disconnection. Featuring an all-in-one and half structure, it comes with multiple 1/4"-20 & 3/8"-16 & ARRI 3/8"-16 accessory threads and three cold shoe mounts for monitors, LED lights, or microphones, and a built-in spanner for easy access. Overall, the lightweight and practical handle can provide a wide range of mounting points and an excellent shooting experience. Compatibility: Universal cold/hot shoe mount Package Includes: 1 x Handle 1 x Hex Spanner
Key Features: 1. Genuine leather half case with a custom fit for Nikon Z fc camera. 2. Improved grip and provide protection. 3. Fastened by a 1/4´´-20 D-ring screw without tools. 4. Features a 1/4´´-20 threaded hole on the bottom that allows attaching a tripod. 5. Maintains access to the battery door, card slot, and flip screen. SmallRig Leather Half Case with Shoulder Strap for Nikon Z fc 3481 is designed to protect your camera from dirt, dust, and scratches. The case has a nonslip texture for an improved grip. Handcrafted with a genuine leather exterior and soft microfiber features a non-scratching interior to prevent sweat from staining the clothes. The case attaches to the bottom of the camera via a 1/4´´-20 D-ring screw, and the shoulder strap attaches to the round strap hole of the camera with the strap ring. The bottom plate features a 1/4"-20 thread for a tripod or other accessory. The case keeps access to the battery compartment, card slot and it will not influence the flip screen.
Stabilisaator sujuvaks ja värinavabaks kaameratööks; Võimaldab salvestada nii maastiku- kui portreeasendis; Värviline 1,4" LCD ekraan & Bluetooth ühendus; Toetab kuni 2-kilost raskust, kaaludes vaid 795 g; Aku kestab kuni ...
Ergonomically designed to improve grip experience, facilitate low-angle shot and reduce burdens on arms. SmallRig 3766 Nato Top Handle The ergonomic handle, featuring anti-slip and anti-freeze silicone, feels comfortable and weighs only 124g because of a hollowed-out structure. It has 3 front cold shoes and 2 rear cold shoes that allow simultaneously mounting microphone, LED light, monitor, and other accessories. ARRI 3/8"-16 locating holes support SmallRig Monitor Mount 2903 and 2348 to attach monitors. 1/4"-20 threaded holes support SmallRig Magic Arm 2070 for monitors and Remote Control 2924 for recording. Its quick-release NATO clamp fits all standard NATO rails. Compatibility: Any accessories features NATO Rail In the Box: 1 x Top Handle
Zhiyun toob Weebill seeriasse uue stabilisaatori ja lisab täiesti uue edastusmooduli professionaalseks videotööks. Weebill S on disainitud tööks enamlevinud peeglivabade ja peegelkaameratega. WELLBILL-S kasutab uut adaptiivset kontrollalgoritmi, mis tunneb ära kasutatava kaamerakomplekti kaalu ja seadistab stabiliseerimismootorid optimaalseimaks tööks teie kaamerakomplektiga. Loomulikult on teil lisaks võimalik seadistada eraldi iga telje reaktsioonikiirust sobivaks teie võtteolukorraga. 300% suurema pöördemomendiga mootorid ja 50% lühem reaktsiooniaeg Võimalik kasutada mõlemas asendis – traditsioonilises vertikaalses ja pööratult madalate võttenurkade korral On võimalik eemalt juhtida Kiire ja lihtne tasakaalustamine Kahepoolne Arca-Swiss ja Manfrotto süsteemiga ühilduv kiirkinnitusplaat Intuitiivne juhtimine tänu OLED ekraanile, otsevaliku nuppudele ja kontrollrattale. Go mode kiirete liikumiste jäädvustamiseks Võimalus kasutada nutiseadet liikumisandurina Kasutusvõimalused avardatavad ZY Play nutirakenduse ja videosignaali edastuskomplekti abil Kuni 14 tundi kasutusaega ühe laadimisega USB-laadimist toetavale kaamerale saate vajadusel anda stabilisaatori akudelt lisatoidet Esimestena püüavad uue Weebill-S juures tähelepanu 300% suurendatud mootorite jõudlus ja 50% lühendatud reaktsiooniaeg. Stabilisaator töötab väga hästi näiteks selliste kaamerakomplektidega, nagu Sony A7III+FE 24-70mm F2.8 või Canon 5D4+EF 24-70mm F2.8. WEEBILL-S unikaalne sling mode võimaldab teil kiirelt ja ergonoomiliselt liikuda kõrgelt võttepositsioonilt madalale võttenurgale, kui kasutate TransMount komplekti. Uus mootorite juhtimise algoritm võimaldab stabilisaatoril määrata automaatselt kasutatava kaamerakomplekti kaalu ning seadistada seadme mootorid optimaalseks tööks. Täiesti uus TransMount Image Transmission Module Uus videoedastusmoodul võimaldab kristallselge 1080p / 30fps pildi edastust kuni 100 meetri kaugusele koos LUT, pseudo coloring, focus peak ja zebra adjustment võimalustega professionaalseks salvest
SIRUI P-325FS and P-325FL are advanced photo/video monopods that combine functions of monopods, monopod with feet, extension rods, and tabletop-tripods intο a whole. The innovative modular design, lightweight and flip-lock mechanism are going to provide you with more convenience and creative opportunities. Sirui Monopod P-325FL For Photo/Video The carbon fiber structure gives the P-325FL monopod a weight of only 1.2 kg, which is 20% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots. The monopod features a unique modular design; Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod. Quick Release System The quick release system has a distinct advantage over the locking knob system. Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way. Thanks to the trigger mechanism, even a mounting plate with heavy gear attached can be inserted intο the quick release sleeves within a second. When inserted, the mounting plate will be locked securely intο place. Quick release mounting screw Press and hold the button to take out the screw. Flip the screw upside down to switch between the 1/4" and 3/8" thread. Quick release tripod base Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod or normal monopod. 360° Panning The upper twist collar has a groove-textured surface for quick adjustment while shooting. Unlock the upper twist collar to get a full 360°panning ability. Quick Leveling Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots 36° Tilting Use the ball locking knob to adjust the friction of the ball. Loosen the ball locking knob and tilt the monopod 36° in any direction to get a lot of movements. Full-Featured Tripod Foot The tripod foot is well built with solid aluminum, offering two positions at your choice. Legs can be folded up reversely to fit intο your backpack. Rubber & Spike Foot The monopod comes with a rubber foot that can be retracted to reveal a spike. Combine functions of monopods with feet, monopod, extension rods, and tabletop-tripod: Monopod with feet Video recordings where you can move smoothly, but still with stability. Monopod Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option Extension Rod Highly mobile situations, weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras Table Tripod Low-angle shooting, desktop recording, close-up shots, vlog shooting.
SmallRig 1446 Top Handle The good quality rubber handle is very good looking and the special design increases its friction during handheld shooting. It is equipped with a cold shoe on the top for attaching a microphone and other accessories. Compatibility: Universal Package Includes: 1 x Top Handle (Rubber) 1 x Hex Spanner 2 x 1/4´´Screw
Valmis kõigeks Vastupidav G-klamber keraliigend-peaga ja nelja 1/4-tollise keermega. Heavy Clamp lubab kinnitada varustust peaaegu kõikjale; kirjutuslaua, riiuli, posti või muu eseme külge. Ainult vaata ringi ning kasuta loovust.
Videostabilisaator nutitelefonile; Pikendatav käepide & kokkupandav disain; Magnetiline telefonikinnitus; Spetsiaalsed rakendused paremateks videoteks; Aku kestab kuni 6,5 tundi
SIRUI P-325FS and P-325FL are advanced photo/video monopods that combine functions of monopods, monopod with feet, extension rods, and tabletop-tripods intο a whole. The innovative modular design, lightweight and flip-lock mechanism are going to provide you with more convenience and creative opportunities. The carbon fiber structure gives the P-325FS monopod a weight of only 1.17 kg, which is 21% lighter than previous models from SIRUI. Weighing about the same as a mirrorless camera, this monopod is of great portability for doing outdoor shoots. The monopod features a unique modular design; Four modules, including the mounting plate, main tube section, tripod foot, rubber foot, can be detached and combined freely to form a monopod, an extension rod, or a tabletop tripod. Quick Release System The quick release system has a distinct advantage over the locking knob system. Pull down the top/bottom quick release sleeve to detach modules in a quick and easy way. Thanks to the trigger mechanism, even a mounting plate with heavy gear attached can be inserted intο the quick release sleeves within a second. When inserted, the mounting plate will be locked securely intο place. Quick release mounting screw Press and hold the button to take out the screw. Flip the screw upside down to switch between the 1/4" and 3/8" thread. Quick release tripod base Remove the rubber foot from the tripod base and attach it to the bottom of the main tube to form an extension rod or normal monopod. 360° Panning The upper twist collar has a groove-textured surface for quick adjustment while shooting. Unlock the upper twist collar to get a full 360°panning ability. Quick Leveling Two bubble levels on the base allow you to always keep the monopod in good balance even when you are doing highly mobile outdoor shoots 36° Tilting Use the ball locking knob to adjust the friction of the ball. Loosen the ball locking knob and tilt the monopod 36° in any direction to get a lot of movements. Full-Featured Tripod Foot The tripod foot is well built with solid aluminum, offering two positions at your choice. Legs can be folded up reversely to fit intο your backpack. Rubber & Spike Foot The monopod comes with a rubber foot that can be retracted to reveal a spike. Combine functions of monopods with feet, monopod, extension rods, and tabletop-tripod: Monopod with feet Video recordings where you can move smoothly, but still with stability. Monopod Event shooting, interview shooting, high-angle shooting, places where the tripod is not an option Extension Rod Highly mobile situations, weight distribution of telephoto lenses, a telescopic stick for stabilizers or action cameras Table Tripod Low-angle shooting, desktop recording, close-up shots, vlog shooting
A versatile shooting grip, selfie stick as well as tabletop tripod for select Sony and Canon cameras featuring Bluetooth connectivity. This grip is designed to improve shooting stability, ideal for vlogging, live streaming, simple everyday use and other scenarios. Features detachable and chargeable wireless remote control can achieve camera photo, video, zoom, focus and other functions, which makes your vlog easier. The grip is extendable with two levels stretch up to 15cm for better selfie and wider view. The integrated head can tilt upward 90°, downward 90°, and rotate 360° for easier positioning. Portable size and lightweight for easy carrying. The bottom of grip comes with a 1/4”-20 threaded hole for tripod to provide wider view and help to stand when use as a selfie stick. High-strength nylon and glass fiber make it robust and durable with a payload up to 1.5kg (0.5kg when stretched). Note: Load Capacity: 1.5kg (folded as a grip or tripod); 0.5kg (extended as a selfie stick) Please do not use the grip as a tripod when extended as selfie stick. Remote control operating range: 10 meters Compatibility: Sony Cameras ZV-1 / ZV-E10 / RX100 Ⅶ / RX0 II Alpha 6100 / Alpha 6400 / Alpha 6600 Alpha 7C / Alpha 7 III / Alpha 7 IV / Alpha 7R III / Alpha 7R IV / Alpha 7S III / Alpha 9 / Alpha 9 II Canon Cameras EOS M6 Mark II / EOS M50 / EOS M50 II / EOS M200 / EOS R / EOS R5 / EOS R6 PowerShot G5X II / G7X III (Depending on the camera, the setup method for remote control shooting may differ, please refer to the instruction manual for your camera)
Specially designed for video shooting and can also be used for smaller spottingscopes. It comes with a removable anti-slip operation lever and can be used for either left handle or right handle, and with an Arca-type quick release plate for a quick switch between handheld shot and tripod shot. SmallRig Selection 3259 Compact Fluid Head CH10 Unlike other traditional fluid heads, it is only 70mm in height and features a 36mm-diameter baseplate, compact and easy to carry around. Fixed damping allows a smooth operation experience. It can be tilted +90°/-55° and swiveled 360° for multi-angle shooting The head also includes a built-in screwdriver. Key features: Compact fluid head, lighter, smaller, and more convenient. Fixed damping for a smooth operation experience. It can be tilted +90°/-55° and swiveled 360°, allowing multi-angle shooting. Pacakge Includes: 1x Fluid Head 1x Arca Swiss Quick Release Plate 1x User Manual
Kolmesuunalise peaga statiiv Nutitelefoni kinnitus 60–98 mm laiusega telefonidele Seikluskaamera kinnitus GoPro ühendusega seadmetele Kolmeosalised alumiiniumist jalad Maksimaalne kõrgus: 159,5 cm Minimaalne kõrgus: 61 cm Kandevõime: kuni 3,5 kg Lood täpseks kadreerimiseks Kiirkinnitusplaat mugavaks kaamera kinnitamiseks Konks kesksamba otsas võimaldab statiivile kinnitada lisaraskuse Camrock TC63 Mobile Kit on suurepärane valik foto- ja videohuvilistele. Sellesse komplekti kuuluvad statiiv, nutitelefoni kinnitus ja seikluskaamera kinnitus.Statiiv saab hakkama kuni 3,5 kg kaaluva varustusega ning maksimaalselt kõrgub see kuni 159,5 cm-ni. Statiivi tugevad kolmeosalised alumiiniumjalad on lisaks erakordsele stabiilsusele ja vastupidavusele ka kiiresti ja lihtsalt reguleeritavad.Lisaks on statiiv varustatud kolmesuunalise statiivipeaga, mis võimaldab kaamera kiiresti statiivile kinnitada ja tabada täpse kaadri. Statiivi kesksammas liigub mugava vända abil. Kesksamba alumises osas olev konks võimaldab statiivile kinnitada lisaraskusi, et stabiilsust veelgi suurendada või vastu panna tuulisemale ilmale.Komplekti kuulub ka praktiline, vastupidav ja pritsmekindel transportkott.
DJI Osmo Mobile 5 LED Telefoniklamber Taustvalgustusega telefoniklamber DJI OM 5 jaoks - magnethoidiku klamber, mille taustvalgus on reguleeritava heleduse ja värvitemperatuuriga. Tarvik on mõeldud vähese valgusega pildistamiseks. Telefoniklamber on varustatud magnetilise disainiga ja ühildub täielikult DJI OM 5 ja DJI OM 4 stabilisaatoritega. Magnet hoidikul on isoleeritud ja ei mõjuta stabilisaatoriga ühendatud telefoni tööd. Samuti on seadmes sisseehitatud LED-lisavalgustus, mida saab reguleerida kolme heledustaseme ja kolme värvitemperatuuri valiku piires. See aitab teil objekte igas olukorras esile tõsta. Mõne nutitelefoni mudeli puhul peate arvestama kalibreerimise vajadusega pärast nende paigaldamist stabilisaatorile. Magnetiline disain võib avaldada negatiivset mõju teistele magnetitundlikkusega seadmetele. Pangakaardi, südamestimulaatori, kõvaketta või sarnaste seadmete kõrvale ei ole soovitatav panna nutitelefoni magnetklambrit. Samuti tuleb arvestada, et magnetklamber võib mõjutada mõnede telefonide tööd, mis kasutavad andmeedastuseks magnetsignaale. Sellisel juhul soovitame enne selle funktsiooni kasutamist telefoniklambri eemaldada. Ühilduvus: DJI Osmo Mobile 6 DJI Osmo Mobile 5 DJI Osmo Mobile 4
Designed for Nikon Z 8 and to protect the camera and attach accessories. The cage gives full access to buttons, card slots, battery door, and the flip screen. SmallRig 3982 Cage for Nikon Z 8 with MB-N12 Battery Grip It locks the camera via one bottom 1/4"-20 screw and one M2.5 screw on both sides, and have rubber pads which preventing scratches There is many accessory mounting points; 1/4"-20 & 3/8"-16 threaded hole and ARRI 3/8"-16 locating hole which can support SmallRig Top Handle 2165 & 1638, Side Handle 2093 & 2425, Monitor Mount 2903 & 2904 and Magic Arm 3875 Two cold shoe mounts fit a microphone and LED video light The Arca Swiss quick-release bottom plate and side plate enable horizontal and vertical shooting on tripods. The bottom Arca-Swiss quick-release plate also supports DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between handheld, gimbal, and tripod modes. At the front end, there are two 1/4"-20 threaded holes for SmallRig Dual 15mm Rod Clamp 942, matte box and lens support One 1/4"-20 locating hole for SmallRig Single Rod Clamp 3276 for follow focus. Besides, a magnetic double-ended wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 with MB-N12 Battery Grip Packaging includes: 1x Cage
Designed for Nikon Z 8 to facilitate a switch between horizontal and vertical modes and to improve grip experience. SmallRig 3942 L-Shape Mount Plate For Nikon Z 8 It locks the camera via one 1/4 "-20 screw at the bottom and one locating pin, with rub pads preventing scratches, and has a hinge arm at the battery door that fits the camera curve to enhance grip. There are multiple accessory mounts: An Arca Swiss quick-release plate for Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals 1/4"-20 & 3/8"-16 threaded holes at the bottom that support SmallRig Side Handle 2093 & 3847, Quick Release Plate 1280 Strap holes for SmallRig Hand Strap 3848 & 2456. The L-Bracket also features a QD mount to attach the QD strap buckle, 1/4"-20 threaded holes, suitable for SmallRig Cold Shoe Mount 2736 for the microphone, as well as a 23mm stretchable side plate that allows cables through in vertical shooting. Besides, a magnetic wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 Packaging includes: 1x L-Shape Mount Plate 1x Allen Wrench
Statiivifunktsiooniga käsistatiiv; Pikeneb kuni 60 cm pikkuseks; Bluetooth ühenduvus; Komplektis kaugjuhtimispult; Ühildub Android ja iOS nutitelefonidega
Designed for Nikon Z 8 to assist with handheld shooting and attach accessories. It includes a cage, an HDMI & USB-C cable clamp, and a top handle. SmallRig 3941 Cage Kit For Nikon Z 8 With a 1/4"-20 threaded hole, 3/8"-16 threaded hole, ARRI 3/8"-16 locating hole, NATO rail, and cold shoe mount, the kit can mount a monitor, microphone, tripod, follow focus, handle, etc. Among its three parts, the cage locks the camera via one bottom 1/4"-20 screw, one locating pin, and one side lock adapter. The ergonomic handle facilitates shooting in motion, providing a comfortable and stable user experience. And the HDMI & USB-C cable clamp, tightened by a hand screw, ensures stable signal transmission. Besides, a magnetic double-ended wrench is included for easy disassembly and assembly. Compatibility: Nikon Z 8 Package includes: 1x Cage 1x Cable Clamp 1x Top Handle
Designed to protect the camera and attach accessories. The cage features rubber pads that prevent scratches and gives full access to buttons, card slots, flip screen, and battery door. SmallRig 3940 Cage For Nikon Z 8 Locking the camera via one bottom 1/4 "-20 screw, one locating screw, and one side lock adapter on the right Among its accessory mounting points, 1/4"-20 threaded hole, 3/8"-16 threaded hole, and ARRI 3/8"-16 locating hole support SmallRig Side Handle 2093 & 3814, Top Handle 3765, Monitor Mount 2903 & 2904, Manfrotto Plate 1280 & 2458, Holder for Portable Power Banks 2336 and mini V Mount Battery Plate 2987. The side 1/4"-20 locating hole fits SmallRig Single Rod Clamp 3598 and Magic Arm 3873, and left NATO rail quickly connects SmallRig Side Handle 3847 & 4017. Besides, there are cold shoe mounts for the microphone and LED video light, strap holes for Smallrig Hand Strap 3848 & 2456, and QD mounts for the QD strap buckle. The bottom Arca-Swiss quick-release plate supports Arca-type tripods or DJI RS 2 / RSC 2 / RS 3 / RS 3 Pro gimbals for a quick switch between gimbal, handheld, and tripod modes. A double-ended wrench is also included for easy disassembly and assembly. Compatibility: Nikon Z 8 Package includes: 1x Cage
The Weebill gimbal is one of Zhiyun´s most popular gimbals for professional content creators. The Zhiyun Weebil 3S comes with several exciting new features such as a new tenth generation of algorithms that boosts the gimbals performance and much more. With the Weebill 3S Zhiyun has further developed the ergonomics of the previous model and the new SLING 2.5 design have a softer grip that makes it easier to hold the gimbal for a longer time without getting tired. A new extendable sling grip can be adjusted to a two-handed grip and allows for left and right tilt adjustments to the direction of the gimbal handle as well as the grip center of gravity, making low-angle and sling mode shooting easier. The wrist rest has a new adjustable knob so the user can adjust the angle of their preference. On the gimbal, Zhiyun have chosen to focus more on vertical shooting and the new gimbal comes with a new innovative quick-release that makes it easy for the user to change between portrait and landscape mode without having to rebalance the gimbal. Weebill 3S comes with Zhiyun Lumen Amplifier technology and the fill light delivers a powerful 1000 Lux light and has an adjustable color temperature of 2600-5500K with a CRI of 90+ On the front of the gimbal there are two customizable buttons that can be set and customized according to the user´s wishes. Weebill 3S can also communicate with the most common camera models via Bluetooth so you don´t need a cable and supports Bluetooth shutter control with most camera models, allowing for the recording button to start/stop recording or trigger photo-taking functions. The gimbal has 12 hours of battery life and reaches full power in only two hours of PD charging. The new Weebill 3S is fully compatible with the Zhiyun Transmount ecosystem of accessories for monitoring and wireless control. In the box: WEEBILL 3S Gimbal CR120 Tripod Quick Release Plate Lens Support Camera Backing Base USB Charging Cable Sony Control Cable LN-UCUS-A03 Canon Control Cable LN-MBUC-A02 Canon Control Cable LN-NBUC-A01 Panasonic Control Cable LN-UCUC-A02 Base (Only in COMBO package) Quick Start Guide
Prime tripod for smaller Video-cameras and Spottingscopes. Sirui ST-124+VA-5 Carbon Tripod Video Kit The Sirui Standard Series tripods are compact, lightweight, strong and waterproof. Packed with features they are the perfect match mirrorless and compact DSLR cameras made for Video. Leightweight and strong carbon fiber sections provide the ultimate stability for your camera. The large leg diameters enhance the strength of the carbon layers. The unique triangle shaped center column allows for a more compact design as well as a sturdier center section. The center column can be reversed to achieve ultra low shooting sections. An extra feature is waterproof twist leg locks. This tripod have interchangeable rubber feet and metal spikes, and 4 section legs. SIRUI VA-5 Professional Fluid Video Head have a fluid system designed to produce smooth pans and tilts. And an internal spring-assisted counter-balance mechanism provides added support, smoother tilt movements and protection to your equipment. Forward/backward camera position adjustments for balance are fast and easy. And the dual safety lock system prevents the camera from falling off when the primary locking mechanism is loosened. To make horizontal alignment of the head extra easy, there are 2 bubble levels - one on the base of the head to align the tripod and one on top of the video head to align the camera (a SIRUI first!). Recommended for video and birdwatching.
