Aquatuning 13mm (1/2") barbed fitting G1/4 with O-Ring (High-Flow)

High-Flow barb fittings for hoses with an inner diameter of 11-13mm. Technical data: Thread: G1/4 Overall length: 29mm Inner diameter of hose: 11 bis 13mm Inner diameter of fitting: 10mm Thread length: 8mm Note for watercooling beginners : The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview: 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required