Tootjad
Hind
Muud
Lisavalikud
Firmad
logo

Aquatuning 13mm (1/2") barbed fitting G1/4 with O-Ring (FatBoy)

Tootekood: FatBoy
Robust high-quality barbed fitting with cylindrical thread (G1/4"). The fitting is suitable for PVC, PU, PA, silicone and PE hoses with an inner diameter of 11-13mm. With integrated 1/4" Perbunan(r) O-Ring seal. We recommend the use of hose clamps or zip ties for best possible safety! Note for watercooling beginners: The connectors for hoses(7/16", 3/8",1/2") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview: 10mm (3/8") hose clamp: up to 8mm none, from 10mm up required 10mm (7/16") hose clamp: up to 8mm none, from 10mm up required 12mm (1/2") hose clamp: up to 11mm none, from 12mm up required 13mm (1/2") hose clamp: up to 11mm none, from 13mm up required

Pakkumised

Toote tehnilised andmed

Tootekood FatBoy
Toode lisatud 2020-01-16

Kommentaarid

Ole esimene, kes toodet kommenteerib