 Alphacool NexXxoS HPE-45 Radiator 420mm - schwarz Tootekood: 14442 Jahutid ja lisad For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H455,5 x 144 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly3x one-sided / 6x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density16 FPIWeight1533gColorblackWarranty: 10 years???? Warranty Terms | 1 | 135,90 € | Vaata | ||
 Alphacool NexXxoS HPE-30 Radiator 420mm - schwarz Tootekood: 14379 Jahutid ja lisad For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat) Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H455,5 x 144 x 30mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly3x one-sided / 6x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density18 FPIWeight984gColorblackWarranty: 10 years???? Warranty Terms | 1 | 118,50 € | Vaata | ||
 Alphacool NexXxoS HPE-45 Radiator 280mm - schwarz Tootekood: 14441 Jahutid ja lisad For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H314,5 x 144 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density16 FPIWeight1131gColorblackWarranty: 10 years???? Warranty Terms | 1 | 111,70 € | Vaata | ||
 Alphacool NexXxoS HPE-45 Radiator 360mm - schwarz Tootekood: 14440 Jahutid ja lisad For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H391,5 x 124 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size120mmPossible fan assembly3x one-sided / 6x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density16 FPIWeight1248gColorblackWarranty: 10 years???? Warranty Terms | 1 | 106,90 € | Vaata | ||
 Alphacool NexXxoS HPE-30 Radiator 280mm - schwarz Tootekood: 14378 Jahutid ja lisad For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical dataL x W x H314,5 x 144 x 30mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density18 FPIWeight724gColorblackWarranty: 10 years???? Warranty Terms | 1 | 91,30 € | Vaata | ||
 Alphacool NexXxoS HPE-45 Radiator 240mm - schwarz Tootekood: 14439 Jahutid ja lisad For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H271,5 x 124 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size120mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density16 FPIWeight929gColorblackWarranty: 10 years???? Warranty Terms | 1 | 87,45 € | Vaata | ||
 Alphacool NexXxoS HPE-30 Radiator 140mm - schwarz Tootekood: 14470 Jahutid ja lisad For more than a decade, Alphacool has dominated the market with the NexXxoS Full Copper radiator series. Our extensive portfolio of radiator variants is unique in the world. Just like our manufacturing process, which allows us to produce all water-carrying parts and the cooling fins out of pure copper. As a result, the NexXxoS series offers the highest thermal conductivity of any radiator on the market. Thanks to their exceptional performance, the radiators can easily dissipate even extremely high waste heat and have become essential in many areas of the cooling industry.The next step in evolution: NexXxoS HPE Full Copper Radiator!The NexXxos Full Copper HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests* with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K.(* Test setup: NexXxos ST30 360mm radiator vs. NexXxos HPE-30 360mm radiator with Eisbaer cooler and 3x 120mm Rise Aurora fans and on Asus Prime x299 motherboard with Intel i9 10900x CPU with 350W waste heat)Connection options & mountingThe NexXxoS HPE radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or drain port, which can be used for filling and draining the water circuit. All screws for mounting in the case and for mounting the fans are included with the radiator. Additional screws are not usually required.Safety firstThe NexXxoS HPE radiator has special protective plates placed under all mounting holes to prevent the screws from being screwed in too deeply. This protects the cooling fins and water channels underneath from damage.Patented screw plugsAll NexXxoS HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often mean that the radiator cannot be laid flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface and allow easy installation in the case. Technical data radiatorL x W x H173,5 x 144 x 30mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly1x one-sided / 2x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density18 FPIWeight496gColorblackWarranty: 10 years???? Warranty Terms | 1 | 77,75 € | Vaata | ||
 Alphacool Frame Eiszyklon Aurora LUX PRO Digital RGB (120x120x25mm) Tootekood: 24806 Jahutid ja lisad You may have already seen the Alphacool Eiszyklon Aurora LUX Pro fan on the Alphacool Eisbaer Aurora series. It offers a wide control range as well as outstanding digital RGB LED lighting. The individually controllable 5V aRGB LEDs paired with the special design of the fan frame create unique effects.Ingenious LightingThe frame is equipped with digital addressable 5V RGB LEDs which illuminate the whole frame. The frame is not completely transparent, but the illumination is done through narrow slits in four places. On the upper side there are two rows of these slits. Each narrow frame runs along the inside and outside of the frame. This creates a unique illumination which looks very noble. Thanks to the recessed light diffusers the light is distributed evenly. This means that Individual LEDs are no longer visible.Wide Control Range and SilentThe fan can be controlled from 800 to 2000 rpm via the 4-pin PWM connector. At 800 rpm the fan is almost silent, but still offers a good airflow rate as well as a high static pressure. Therefore, the fan can also be used very well on radiators for a water cooling system. Thanks to the high airflow, the fan is also ideal for ventilating a case. Decouplers are also found directly on the frame. The soft foam padding reduces the transmission of vibrations to the case. A further plus point for the silent capability of the fan.Connections?The fan is controlled via a 4-pin PWM connector. The cable is 50 cm long. This allows the fan to be connected to the mainboard or a special controller without any additional adapter cables or extensions. The digital aRGB LED lighting is controlled via a JST 3-pin connector. Technical dataSpeed800 - 2000 RPMStatic pressure2,0 mm/H2OAir flow rate104,49 m³/hBearingsHydraulicFan connector4-Pin PWMConnection Digital aRGB3-Pin JST + 3-Pin 5VQuantity Digital aRGB LED16Dimensions120 x 120 x 25 mmNet weight187 gMax working temperature60 °CWarranty: 3 years???? Warranty Terms | 1 | 10,15 € | Vaata | ||
 | |||||
 Alphacool Backplate with Screws LGA 115x/1200/1700 Tootekood: 13064 Jahutid ja lisad The Alphacool synthetic backplate for XPX, XPX Aurora, XPX Aurora Edge, XPX 1U, XPX Pro 1U, XPX Pro Aurora, Eisbaer, Eisbaer Aurora, Eisbaer Pro, Eisbaer LT is compatible with Intel's LGA 115X, 1200 and 1700 sockets. This includes solo water coolers and CPU AIOs. The backplate stabilises the CPU cooler on the socket and ensures optimum contact pressure. There is an additional adhesive surface on the back of the backplate that serves as an installation aid and thus makes mounting much easier.Compatibility:Intel: LGA 1150 / 1151 / 1155 / 1200 / 1700 Technical data L x W x H 99 x 99 x 3 mm Material synthetic Weight 29 g Color black | 1 | 5,95 € | Vaata | ||
 Alphacool Eisbaer Extreme liquid cooler core 280 - black edition Tootekood: 11608 Jahutid ja lisad Revolutionise your system with the Eisbaer Extreme Core, the foundation of your new watercooled PC. We believe that the Alphacool EIsbaer Extreme Core Radiator with pump is stronger, more beautiful and quieter than anything you've ever known in water cooling.Pure PerformanceThe Eisbaer Extreme is a brand-new design for Alphacool. A high-quality housing encloses the radiator and fans as well as a patented pump/reservoir combination. With the Eisbaer Extreme you have the coolest cooling for your hardware.Progress into a New AgeAlphacool gives you the flexibility you need. Use your Eisbaer Extreme perfectly thanks to the new Eisbaer Ready quick-release couplings. These are compatible with all Eiswolf / Eisbaer quick release connections. The redesigned, powerful VPP755 Eispump gives you the flow you need.IndividualWith the Eisbaer Extreme you decide how your system is structured. You can expand this All-in-One at any time with additional components, modify it or fill it according to your desires. Whether you install the Eisbaer Extreme horizontally or vertically, it's up to you how you showcase your water cooling system. Compatibility:AMD: AM3 / AM3+ / AM4 / AM5 / FM2 / FM2+ / TR4Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1366 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 Technical data (general)Dimensions (LxWxH)385,5 x 156 x 64mmHousing materialaluminiumReservoirintegrated, 138mlMaintenance optionsFillport with patented screw plugTechnical data Alphacool Eispumpe VPP755 V.3ControlPWMConnection4Pin PWM / 4Pin MolexMaximum head pressure4,25mOther specificationsStartboost function, self-venting, improved software, new bearing of the ceramic axlesControl range1. 2100 rpm 120l/h | 2. 2700 rpm 140l/h | 3. 3330 rpm 280l/h | 4. 3950 rpm 320l/h | 5. 4350 rpm 340l/hTechnical data be quiet! Pure Wings 2 140mmDimensions140 x 140 x 25 mmColorblackVoltage range5-12VSpeed1000 rpm (+/- 10%)Noise emission18,8 dBAAirflow61,2 CFM, 104 m³/hStatic pressure0,76 mm/H2OBearingsrifle bearingsConnector3Pin Molex plugDurability80.000 h | 2 | 194,30 € | Vaata | ||
 Alphacool CPU Cooler Core Hurrican 360mm XT45 HardTube water cooling Set With the Core Hurrican HardTube water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Eisblock XPX Aurora Edge CPU CoolerAlphacool's Eisblock XPX Aurora Edge CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel.Eisbecher Aurora D5 250mm & VPP Apex PumpThe Alphacool Eisbecher Aurora glass reservoir uses a real glass tube rather than the usual plastic tube that Alphacool usually relies on. The embedded 5V digital RGB LED ring and the new design makes the reservoir look magnificent. Of course, the Lighttower water effect is used again. The mounting can be done via feet but also mounted on 120 or 140mm fan mounts or even directly to a radiator. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. Via the 4-pin fan connector, the speed of the pump can be read and controlled via PWM signal. The Apex VPP is supplied with power via the SATA connector.NexXxoS XT45 Full Copper 360mm Radiator V.2All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS XT45 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop.Rise Aurora 120mm fansThe fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan.Eisrohr 16/13mm PETG HardTubeThe Alphacool Eisrohr PETG HardTube givse the user the possibility to create a very special look. With a wall thickness of 3 mm, the tubes are very strong, but can still be bent without great effort and they are easy to fit. The HardTubes are clear and will look great in almost every water cooling loop. When cutting the tubes, make sure to chamfer the edges with fine file or a hose deburrer, as sharp edges can damage the O-rings of fittings.Eiszapfen 16/13mm G1/4" ConnectionsAll the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off.Thermal Paste & CoolantThe included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle.aRGB Controller, Cables, Tools & AccessoriesAll cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like filling bottle, deburrer and pit saw. Thus, the construction of the custom loop can be started "out-of-the-box" immediately. Compatibility:Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data CPU coolerDimensions (L x W x H)70 x 70 x 32,5mmMaterial coolernickel-plated copperMaterial housingbrass, acrylicThreads2 x G1/4“Illumination3-Pin 5V, 15 digital aRGB LEDsMax working temperature60°CPressure tested0,8 BarTechnical data reservoirDimensions (L x W x H)77 x 77 x 242mmCapacity250mlMaterial housingAcetalMaterial tubeGlassMaterial framing barAluminiumThreads1x G1/4“ IT IN | 4x G1/4“ IT OUTIllumination5V digital addressable LED‘s (0,3A)Max working temperature60°CPressure tested0,8 BarTechnical data pumpDimensions (L x W x H)65 x 65 x 41mmMaterialsynthetic material, aluminium, ceramicsThreads4Pin PWM I SATARotational speed2500 - 4500 RPMOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25mMaximum flow rate340L/hMax working temperature60°CPressure tested0,8 BarTechnical data radiatorDimensions (L x W x H)391,5 x 124 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4"Possible fan size120mmPossible fan assembly3x one-sided / 6x both-sidedFin density12Max working temperature60°CPressure tested0,8 BarTechnical data fanDimensions (L x W x H)120 x 120 x 25mmSpeed0-2500 rpm (+/-10%)Threads4-Pin PWMVoltage12V DCCurrent consumption0,65A (0.72A max)Static pressure3,17 mm/H2OMax. air flow118,9 m³/hNoisemax. 31,5 dB(A)Speedometer signalyesAuto-RestartyesIllumination3-Pin 5V, 20 digital aRGB LEDsTechnical data tubeDimensions (outer/inner)16/13mmMaterialPETGLength4x 60cmColorclearTechnical data 16/13mm G1/4" fittingsMaterialbrassThreads1x G1/4" OTColorblackTechnical data coolantIngredientsosmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%)Boiling point105°CFreezing point-10°CPackaging unit1L bottleColorclear (not UV-active)Technical thermal greaseViscosity (mPa. s)3.000.000Specific Gravity (g/cm³)2,7Thermal Conductivity (w/m-K)16Temperature Stability (Degree Celcius)-50 ~ 200Colorgray | 3 | 385,10 € | Vaata | ||
 Alphacool CPU Cooler Core Storm 240mm XT45 water cooling Set Tootekood: 11989 Jahutid ja lisad With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop.Eisblock XPX Aurora CPU CoolerAlphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel.Core 100 Aurora Reservoir & VPP Apex PumpThe Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector.NexXxoS XT45 Full Copper 240mm Radiator V.2All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS XT45 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop.Rise Aurora 120mm fansThe fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan.AlphaTube HF 13/10mm tubing & HF G1/4" quick connect couplingThe clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop.Eiszapfen 13/10mm G1/4" ConnectionsAll the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off.Thermal Paste & CoolantThe included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle.aRGB Controller, Cables, Tools & AccessoriesAll cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately. Compatibility:Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data CPU coolerDimensions (L x W x H)75,8 x 75,8 x 33mmMaterial coolernickel-plated copperMaterial housingnylon, acrylicThreads2 x G1/4“Illumination3-Pin 5V, 15 digital aRGB LEDsMax working temperature60°CPressure tested0,8 BarTechnical data reservoirDimensions (L x W x H)131 x 76,5 x 76,5mmCapacity200 mlMaterial Pump top & coveracetalMaterial tubeacrylicThreads3x G1/4“ ITIllumination3-Pin 5V, 12 digital aRGB LEDsMax working temperature60°CPressure tested0,8 BarTechnical data pumpDimensions (L x W x H)65 x 65 x 41mmMaterialsynthetic material, aluminium, ceramicsThreads4-Pin PWM | SATARotational speed2500 - 4500 RPMOperating voltage8-13V DC / 14W IP32Starting voltage12V DCMaximum pumping head4,25mMaximum flow rate340L/hMax working temperature60°CPressure tested0,8 BarTechnical data radiatorDimensions (L x W x H)271,5 x 124 x 45mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4"Possible fan size120mmPossible fan assembly2x one-sided / 4x both-sidedFin density12Max working temperature60°CPressure tested0,8 BarTechnical data fanDimensions (L x W x H)120 x 120 x 25mmSpeed0 - 2500 RPM (+/- 10%)Threads4-Pin PWMVoltage12V DCCurrent consumption0,65A (0,72 max)Static pressure3,17 mm H2OMax. air flow118,9 m³/hNoisemax. 31,5 dB(A)Speedometer signalyesAuto-RestartyesIllumination3-Pin 5V, 20 digital aRGB LEDs, 3.5WTechnical data tubeDimensions (outer/inner)13/10mmMaterialPVCLength3mColorclearTechnical data 13/10mm G1/4" fittingsMaterialbrassThreads1x G1/4" OT | 1x tube connection 13/10mmColorblackTechnical data quick release couplingDimensions (L x D)60,3 x 26,1mmMaterialsynthetic materialThreads2x G1/4“ ITColorblackTechnical data coolantIngredientsosmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%)Boiling point105°CFreezing point-10°CPackaging unit1L bottleColorclear (not UV-active)Technical thermal greaseViscosity (mPa. s)3.000.000Specific Gravity (g/cm³)2,7Thermal Conductivity (w/m-K)16Temperature Stability (Degree Celcius)-50 ~ 200Colorgray | 1 | 288,90 € | Vaata | ||
 Corsair CPU Cooler iCUE H150i ELITE CAPELLIX XT AiO 360mm Liquid CPU Cooler, Black The CORSAIR iCUE H150i ELITE CAPELLIX XT Liquid CPU Cooler provides powerful, high-performance cooling for your processor, with CORSAIR AF RGB ELITE fans, a 360mm radiator, and ultra-bright CAPELLIX LEDs. | 25 | 199,90 € | Vaata | ||
 Corsair CPU Cooler iCUE H150i ELITE CAPELLIX XT Liquid 360mm, White The CORSAIR iCUE H150i ELITE CAPELLIX XT Liquid CPU Cooler provides powerful, high-performance cooling for your processor, with CORSAIR AF RGB ELITE fans, a 360mm radiator, and ultra-bright CAPELLIX LEDs. | 14 | 199,90 € | Vaata | ||
 | 17 | 18,76 € | Vaata | ||
 Noctua HC7 chromax.black CPU Cooler Cover - Black, Aluminum Kühler-Abdeckung von Noctua, für NH-U12A, aus pulverbeschichtetem Aluminium, inklusive austauschbarer Farbeinlagen | 15 | 18,94 € | Vaata | ||
 Jonsbo CPU Cooler HX7280 Dual Tower with 2x 140mm & 1x 120mm Fans, Black Black twin-tower CPU cooler, 2x 140mm PWM fans with 700 to 1,800 RPM, seven copper heatpipes and max. 280W TDP, compatible with AMD and Intel CPUs.Socket compatibility：Intel LGA1200/115X/1700/2011, AMD AM4/AM5 | 6 | 82,25 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² Trio RTX 3080/90 ABP Set D-RGB - Nickel + Acryl Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für MSI Trio und Suprim 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung | 2 | 394,60 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² RE RTX 3080/90 ABP Set D-RGB - Nickel + Acetal Tootekood: 3831109854891 Jahutid ja lisad GPU-Wasserkühler mit aktiver Backplate, für RTX 3080/3090-Grafikkarten im Referenz-Design, Kühlkörper aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, integrierte D-RGB-Beleuchtung | 3 | 374,40 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector FE RTX 3090 D-RGB - Silver Special Edition GPU-Wasserkühler im Full-Bock-Design, für NVIDIA GeForce RTX 3090 Founders Edition-Grafikkarten, transparenter Acrylglas-Deckel, Kühlkörper aus vernickeltem Kupfer, integrierte und adressierbare D-RGB-Beleuchtung, inkl. Backplate und zwei Anschlussterminals | 3 | 331,60 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector FE RTX 3090 Ti D-RGB - Silver Special Edition Full-Cover-Waterblock von EK Water Blocks, für NVIDIA GeForce RTX 3090 Ti Founders Edition-Karten, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung | 3 | 331,60 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² XC3 RTX 3080/90 ABP Set D-RGB - Nickel + Acetal Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung | 3 | 321,40 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² XC3 RTX 3080/90 ABP Set D-RGB - Nickel + Acryl Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung | 3 | 321,40 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² FTW3 RTX 3090 Ti D-RGB ABP Set - Nickel + Plexi Tootekood: 3831109897287 Jahutid ja lisad Kühlblock und Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA RTX 3090 Ti FTW3-Grafikkarten, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung | 2 | 258,80 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² FTW3 RTX 3090 Ti D-RGB - Nickel + Plexi Tootekood: 3831109897263 Jahutid ja lisad Full-Cover-Waterblock von EK Water Blocks, für EVGA RTX 3090 Ti FTW3-Grafikkarten, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung | 2 | 257,90 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² Xtreme RTX 3080/90 D-RGB - Nickel + acryl Tootekood: 3831109896044 Jahutid ja lisad Full-Cover-Waterblock von EK Water Blocks, für GIGABYTE AORUS Master und Xtreme 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung | 2 | 242,80 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² XC3 RTX 3080/90 D-RGB - Nickel + Acryl Tootekood: 3831109892251 Jahutid ja lisad Full-Cover-Waterblock von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung | 3 | 222,70 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² XC3 RTX 3080/90 D-RGB - Nickel + Acetal Full-Cover-Waterblock von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung | 3 | 222,60 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² Xtreme RTX 3080/90 D-RGB ABP - Nickel + acryl Tootekood: 3831109896105 Jahutid ja lisad Backplate mit aktiver Kühlung von EK Water Blocks, für GIGABYTE AORUS Master und Xtreme 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung | 2 | 192,20 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² FTW3 RTX 3080/90 ABP D-RGB - Nickel + Acetal Aktive Backplate für GPU-Wasserkühlung, für EVGA FTW3 RTX 3080/3090-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, integrierte D-RGB-Beleuchtung | 2 | 192,20 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² XC3 RTX 3080/90 ABP D-RGB - Nickel + Acryl Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung | 5 | 182,10 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² XC3 RTX 3080/90 ABP D-RGB - Nickel + Acetal Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung | 3 | 175,60 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² Trio RTX 3080/90 ABP D-RGB - Nickel + Acetal Backplate mit aktiver Kühlung von EK Water Blocks, für MSI Trio und Suprim 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung | 3 | 164,90 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² Strix RTX 3080/90 ABP D-RGB - Nickel + Acetal Aktive Backplate für GPU-Wasserkühlung, für ASUS Strix RTX 3080/3090-Grafikkarten, Kühlkörper aus vernickeltem Kupfer, Deckel aus schwarzem Acetal, integrierte D-RGB-Beleuchtung | 3 | 199,30 € | Vaata | ||
 EK Water Blocks EK-Quantum Vector² Strix RTX 3080/90 ABP D-RGB - Nickel + Acryl Tootekood: 3831109891353 Jahutid ja lisad Aktive Backplate für GPU-Wasserkühlung, für ASUS Strix RTX 3080/3090-Grafikkarten, vernickelter Kupferblock mit Acrylglas-Deckel, integrierte D-RGB-Beleuchtung | 2 | 192,20 € | Vaata | ||
1 | 390,14 € | Vaata | |||
 Alphacool Core Storm 420mm XT45 Water Cooling Set Tootekood: 11991 Jahutid ja lisad Wasserkühlungs-Komplettset, beeinhaltet alle notwendigen Teile für eine CPU-Kühlung, inklusive Tubes, für Custom Wasserkühlungen | 1 | 442,25 € | Vaata | ||
 Alphacool CPU Cooler Core Storm 420mm ST30 water cooling Set Tootekood: 11988 Jahutid ja lisad With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 420mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 140mm fans The fans can be controlled from 0 to 2000 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (154.1 m3/h) coupled with high static pressure (2.20 mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 24 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately. Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 455,5 x 144 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 140mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 140 x 140 x 25mm Speed 0 - 2000 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 6,6 Watt (max) Static pressure 2,20 mm/H2O Max. air flow 154,1 m³/h Noise max. 38,4 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 24 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray | 2 | 317,70 € | Vaata | ||
 Alphacool Core Storm 360mm XT45 vesijahutuskomplekt With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS XT45 Full Copper 360mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS XT45 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately. Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 391,5 x 124 x 45mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 12 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray | 3 | 317,70 € | Vaata | ||
 Alphacool CPU Cooler Core Storm 360mm ST30 water cooling Set Tootekood: 11986 Jahutid ja lisad With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 360mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately. Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 391,5 x 124 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 3x one-sided / 6x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray | 2 | 288,90 € | Vaata | ||
 Alphacool CPU Cooler Core Storm 240mm ST30 water cooling Set Tootekood: 11985 Jahutid ja lisad With the Core Storm water cooling kit, Alphacool provides all the components needed to get started in the world of water cooling. The set is aimed not only at beginners, but also at enthusiasts. The selected components are optimally matched and come from Alphacool's DIY program. The choice of materials is still uncompromisingly based on copper or brass for all metals in order to guarantee performance-oriented CPU cooling. Due to the included quick-release fastener, additional components like radiators or GPU coolers can be integrated afterwards without having to drain or rebuild the water loop. Eisblock XPX Aurora CPU Cooler Alphacool's Eisblock XPX Aurora CPU water cooler offers the highest performance and impresses with its outstanding quality. The patented ramp system ensures optimal water flow within the cooler as water is forced evenly through the jet plate. 81 cooling fins are distributed on the CPU cooler base, occupying an area of 34 x 32mm and thus accommodating the ever-growing CPU DIEs. The Aurora design in combination with the 15 addressable digital aRGB LEDs provides many options for outstanding CPU water cooler illumination. The included mounting hardware makes the CPU cooler compatible with popular mainstream sockets from AMD and Intel. Core 100 Aurora Reservoir & VPP Apex Pump The Core reservoir combines performance with design. The reservoir tube is made of acrylic, while the D5/VPP pump top and lid are made of acetal. The combination of these two materials gives the expansion tank a subtle appearance. The wow effect is provided by 12 digitally addressable RGB LEDs in the pump top and the Lighttower water effect inside the acrylic tube. The Apex VPP is a powerful pump that is compatible with the most popular D5/VPP tops and reservoirs. The pump's speed can be read out via the 4-pin fan connector and controlled via PWM signal. The Apex VPP is supplied with power via a SATA connector. NexXxoS ST30 Full Copper 240mm Radiator V.2 All water-bearing parts and the cooling fins are made of pure copper. Thus, the NexXxoS ST30 achieves the highest thermal conductivity value of all radiators on the market and can easily dissipate extremely high waste heat. The radiator has two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side is a fill or vent port, which can be used to fill and drain the water loop. Rise Aurora 120mm fans The fans can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m3/h) coupled with high static pressure (3.17mm/H2O). In addition to a wide control range, the Rise fan also offers superior digital aRGB lighting. The frame and hub feature 20 digitally addressable 5V RGB LEDs that illuminate the entire fan. AlphaTube HF 13/10mm tubing & HF G1/4" quick connect coupling The clear 13/10mm hose made of PVC offers comfortable handling when routing and connecting water cooling components. It has good routing and kinking characteristics and allows uncomplicated bridging of tight bend radii. The HF quick-connect coupling included in the scope of delivery allows easy integration of further components at a later date without having to drain or rebuild the water loop. Eiszapfen 13/10mm G1/4" Connections All the requirements for a connection are met here: Highflow, shape, machining and coloring. Special manufacturing processes firmly bond the coating to the substrate. This increases the longevity of the color and prevents the coating from flaking off. Thermal Paste & Coolant The included thermal paste is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive Thermal Grease is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Tec Protect 2 Clear in the 1 liter bottle is used as the coolant. Tec Protect 2 Clear is a ready-to-use mixture that already contains all the necessary additives and can be used straight from the bottle. aRGB Controller, Cables, Tools & Accessories All cables (aRGB, PWM) and controllers needed to use & control the pump, fan and aRGB lighting are included. The accessory package also includes important tools like hose cutter, filling bottle and an ATX 24-pin jumper. Thus, the construction of the custom loop can be started "out-of-the-box" immediately. Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 2011 / 2011-3 / 2066 / 1700 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data CPU cooler Dimensions (L x W x H) 75,8 x 75,8 x 33mm Material cooler nickel-plated copper Material housing nylon, acrylic Threads 2 x G1/4“ Illumination 3-Pin 5V, 15 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data reservoir Dimensions (L x W x H) 131 x 76,5 x 76,5mm Capacity 200 ml Material Pump top & cover acetal Material tube acrylic Threads 3x G1/4“ IT Illumination 3-Pin 5V, 12 digital aRGB LEDs Max working temperature 60°C Pressure tested 0,8 Bar Technical data pump Dimensions (L x W x H) 65 x 65 x 41mm Material synthetic material, aluminium, ceramics Threads 4-Pin PWM | SATA Rotational speed 2500 - 4500 RPM Operating voltage 8-13V DC / 14W IP32 Starting voltage 12V DC Maximum pumping head 4,25m Maximum flow rate 340L/h Max working temperature 60°C Pressure tested 0,8 Bar Technical data radiator Dimensions (L x W x H) 271,5 x 124 x 30mm (+/- 3%) Material cooling fins, pre-chambers & channels copper Material threads brass Material outer housing stainless steel Threads 4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" Possible fan size 120mm Possible fan assembly 2x one-sided / 4x both-sided Fin density 15 Max working temperature 60°C Pressure tested 0,8 Bar Technical data fan Dimensions (L x W x H) 120 x 120 x 25mm Speed 0 - 2500 RPM (+/- 10%) Threads 4-Pin PWM Voltage 12V DC Current consumption 0,65A (0,72 max) Static pressure 3,17 mm H2O Max. air flow 118,9 m³/h Noise max. 31,5 dB(A) Speedometer signal yes Auto-Restart yes Illumination 3-Pin 5V, 20 digital aRGB LEDs, 3.5W Technical data tube Dimensions (outer/inner) 13/10mm Material PVC Length 3m Color clear Technical data 13/10mm G1/4" fittings Material brass Threads 1x G1/4" OT | 1x tube connection 13/10mm Color black Technical data quick release coupling Dimensions (L x D) 60,3 x 26,1mm Material synthetic material Threads 2x G1/4“ IT Color black Technical data coolant Ingredients osmose water(93,8%), glysofor L (4,2%), RHOBA KLA (2%) Boiling point 105°C Freezing point -10°C Packaging unit 1L bottle Color clear (not UV-active) Technical thermal grease Viscosity (mPa. s) 3.000.000 Specific Gravity (g/cm³) 2,7 Thermal Conductivity (w/m-K) 16 Temperature Stability (Degree Celcius) -50 ~ 200 Color gray | 2 | 262,30 € | Vaata | ||
4 | 134,90 € | Vaata | |||
5 | 133,00 € | Vaata | |||
5 | 118,00 € | Vaata | |||
5 | 91,70 € | Vaata | |||
 Zalman CPU Cooler CNPS9X PERFORMA ARGB Black Zalman CNPS9X PERFORMA ARGB BLACK. Tüüp: Õhujahuti, Ventilaatori läbimõõt: 12 cm, Õhuvool: 104,25 m³/h, Maksimaalne õhusurve: 1,43 mmH2O. Laius: 122 mm, Sügavus: 76 mm, Kõrgus: 157 mm | 14 | 30,29 € | Vaata | ||
 Zalman CPU Cooler CNPS9X PERFORMA Black Zalman CNPS9X PERFORMA BLACK. Tüüp: Õhujahuti, Ventilaatori läbimõõt: 12 cm, Õhuvool: 104,25 m³/h, Maksimaalne õhusurve: 1,43 mmH2O. Laius: 122 mm, Sügavus: 76 mm, Kõrgus: 157 mm. Toote värv: Must | 14 | 26,80 € | Vaata | ||
 | 12 | 21,49 € | Vaata | ||
 Corsair WAK Cooling iCUE H170i ELITE CAPELLIX XT 420mm Eeltäidetud, lihtne paigaldada!; 420 mm jahutuselement; AF RGB ELITE fännid; Null RPM režiim; Eelpaigaldatud XTM70 termopasta | 23 | 219,00 € +3,30 € | Vaata | ||
 Alphacool Core Geforce RTX 4090 Suprim with Backplate Die Core-Produktserie von Alphacool zeichnet sich durch hochwertige Qualität, herausragende Leistung und einheitliche, funktionale Designsprache aus. Der Kern dieses Kühlers ist der Kupferkühler, der zusammen mit dem Abschlussterminal aus einem Stück Kupfer gefräst wird. Die feine Verarbeitung in Kombination mit der harten und widerstandsfähigen Verchromung des gesamten Kupferkühlers entspricht höchsten Qualitätsstandards. Die beiden integrierten G1/4"-Messinggewinde, die in Chrom belassen sind, heben sich optisch vom Terminal ab und sind einer der Kernpunkte der neuen Designsprache, die sich bei allen Produkten der Core-Serie zeigt. Die Aluminium-Backplate, die an das Design angepasst ist, bildet zusammen mit dem Terminal eine Einheit und überzeugt auf der Rückseite des Kühlers mit einer klaren und homogenen Optik. Die Beleuchtung besteht aus digital adressierbaren RGB-LEDs, die den gesamten Kühler gleichmäßig und gut ausleuchten. Die technische Weiterentwicklung zeigt sich beim Wasserzulauf zur Düsenplatte sowie bei der Optimierung der Jetplate selbst. Diese wurde auf Basis von vielen Simulationen und praktischen Tests in Zusammenarbeit mit Boardpartnern komplett neu gestaltet. Die Finnendicke und Abstände wurden verändert, die Kühlfläche vergrößert und der Wasserfluss auf die Kernkomponenten mit der größten Wärmeabgabe optimiert. Die beiliegenden speziellen Soft Wärmeleitpads mit bis zu 7 W/mK passen sich perfekt selbst kleinsten Toleranzen an. Kompatibilität: - MSI GeForce RTX 4090 Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 4090 Suprim Liquid X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 4090 Gaming Trio 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 4090 Gaming X Trio 24G, 24GB GDDR6X, HDMI, 3x DP (V510-006R) Technische Daten Kühler Abmessungen (L x B x H) 269,37 x 153,75 x 32,85mm Material Kühlerboden verchromtes Kupfer Material Kühleroberseite Acryl Anschlüsse 4 x G1/4" Dicke Kühlerboden 11,3mm Dicke Kühlfinnen 0,4mm Abstand Kühlfinnen 0,4mm Beleuchtung digital aRGB LEDs Stromanschluss digital aRGB LEDs 3-Pin JST Spannung digital aRGB LEDs 5V Anzahl digital aRGB LEDs 16 Farbe transparent Technische Daten Backplate Abmessungen (L x B x H) 269,37 x 130,75 x 5mm Material Aluminium Farbe schwarz | 5 | 194,30 € | Vaata | ||
Jahutid ja lisad
3 931 toodet
