The Ninja 5 CPU Cooler brings some innovations with it and puts thanks to the two included Kaze Flex 120 PWM fans a special focus on whisper-quiet operation. The fans are mounted in a push/pull construction and provide enormous cooling power despite the low speed of maximum 800 rpm. The proven Kaze Flex series uses closed liquid bearings (Sealed Precision FDB) and thus guarantees a long service life of 120,000 hours (MTTF) as well as particularly quiet running. The design of the heat sink is designed for high compatibility, which supports even LGA 2066 motherboards with eight RAM slots. Six nickel-plated 6-millimeter copper heat pipes, a nickel-plated copper base plate and the black anodized top plate underline the high-quality workmanship. In addition, the third version of the Hyper Precision Mounting System (H.P.M.S.) is used, which significantly simplifies mounting and offers compatibility with a wide range of sockets from processor manufacturers AMD™ and Intel™ Technical details Model name: Kaze Flex 120 PWM Fan dimensions: 120 x 120 x 27 mm Noise level: 4 ~ 14.5 dBA Air flow rate: 16.6 ~ 43.03 CFM / 28.2 ~ 73.1 m³/h Fan speed: 300 ~ 800 rpm (±10%) (PWM controlled) Static pressure: 0.75 ~ 4.8 Pa / 0.076 ~ 0.49 mmH²O Bearing type: Sealed Precision FDB Voltage: 12V / 0,09 A MTTF: 120,000 hours at 25°C Compatibility Intel®: Socket LGA775 Socket LGA1150 Socket LGA1151 Socket LGA1155 Socket LGA1156 Socket LGA1366 Socket LGA2011 / 2011-v3 (Square ILM) Socket LGA2066 AMD®: Socket AM2 Socket AM2+ Socket AM3 Socket AM3+ Socket AM4 Socket FM1 Socket FM2 Socket FM2+
For our handy DIY customers: 4-Pin Molex plug. This plug can be used for replacement of defective old plugs. It can also be used to create custom connectors and adaptors without a great deal of work. If one wishes to optimize both optics and Airflow in a system by using custom cable length, there is no way around these DIY plugs. The plugs also give the possibility to lower the supply voltage for e.g. fans by switching the connector pins down to 7V or even 5V to make the system more quiet-running. The installation is quick and easy: The plug is shipped in twp parts. One is the plastic plug itself and the other are the metal connection pins. Simply insert a bared cable into the metal pin and fixate it by closing the pin's opening with pliers. Then the pin can simply be pushed into the plastic plug where it will lock in place. Extent of delivery: 4x Metal pins 1x Plastic plug
The white Bykski fittings are made of brass and are designed for 13/10mm Soft Tubes. Technical Data: Material: Brass Color: White Thread: G1/4 Zoll Thread Length: 5 mm Tubing Size: 13/10 mm (ID 3/8", OD 1/2")
dimensions 140x140x25mm, revolutions 1250rpm, Airflow 85m³ / h, Air pressure 1.40mmH₂O, Volume 26dB (A), Fan bearing hydrodynamic plain bearing, Connection 4-pin PWM, Voltage range 6-13.2V, power consumption 3.96W, Special features RGB illuminated (34 LEDs), RGB header (Corsair), LED control, CO-9050100-WW
dimensions 120x120x25mm, revolutions 1500rpm, Airflow 71m³ / h, Air pressure 1.55mmH₂O, Volume 26dB (A), Fan bearing hydrodynamic plain bearing, Connection 4-pin PWM, Voltage range 6-13.2V, power consumption 3.96W, Special features RGB illuminated (34 LEDs), RGB header (Corsair), LED control, CO-9050098-WW
Dimensions 140x140x25mm, Revolutions 550-1250rpm, Air throughput 85.29m³ / h, Air pressure 1.40mmH₂O, Volume 26dB (A), Fan bearing hydrodynamic plain bearing, Voltage range 6-13.2V, Power consumption 3.96W, Connection 4-pin PWM, 4-pin Corsair RGB, RGB lighting (34 LEDs), Special features LED control, CO-9050106-WW
Product kirjeldus: CORSAIR iCUE QL120 RGB system cabinet fan kit Product Type: System cabinet fan kit Package Content: Mounting screws for case fans, 3 fans, Corsair Lighting Node CORE Fans kogus: Triple Fan Diameter: 120 mm Fan kõrgus: 25 mm Fan Bearing: Hydraulic bearing pöördekiirus: 525-1500 pööret minutis õhuvool: 41.8 cfm müratase: 26 dBA Features: PWM control, anti-vibration kummist pads, RGB LED x34 mõõtmed (WxDxH): 12 cm x 2.5 cm x 12 cm kaal: 171 g Features: Corsair iCUE Manufacturer Warranty: 2-year garantii
Thermaltake UX100 ARGB Lighting CPU Cooler - 9-high air flow blade, hydraulic bearing, and 16.8 million colors of 15 ARGB LEDs - ready to sync 5V RGB enabled motherboards from ASUS, ASRock,GIGABYTE+MSI. Switching the customized ...
120-mm-Gehäuselüfter, Drehgeschwindigkeit bis max. 2.000 U/min, maximale Lautstärke von 38,9 dB(A), 4-Pin-PWM-Anschluss, hohe Lebenserwartung von 70.000 Stunden
Thermaltake Pacific C-PRO G1/4 PETG Tube 16mm OD Compression – Black (6-Pack Fittings) The Pacific C-Pro Series is a revolution in fitment design. It simplifies the process of setting up a liquid-cooling loop and provides a seal that outperforms traditional compression fittings. By using 4 preinstalled O-rings and an overhauled design, the C-Pro Series is the new standard in fitment technology and it is exclusive to Thermaltake.
Dimensions 120x120x25mm, Revolutions 650-1800rpm, Air throughput 105.3m³ / h, Air pressure 2.5mmH₂O, Volume 8-27dB (A), Fan bearing simple plain bearing, Voltage range 12V, Power consumption 1.8W, Connection 4-pin PWM, 3-pin ARGB (+ 5V / DATA / GND), RGB lighting, Special features LED control, MFX-B2DN-183PA-R1
IDEAL WHERE SPACE IS LIMITED Unlike normal case fans, which are 25 mm thick, the P12 Slim PWM PST has an installation depth of only 15 mm. This makes it a predestined fan for small form factor builds. OPTIMISED FOR STATIC PRESSURE During the development of the new P12 Slim PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P12 Slim PWM PST is particularly suitable for use on covered case vents or inlets with filters. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P12 Slim PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 300 TO 2100 RPM REGULATED VIA PWM PST With a wide range of regulation and the PWM Sharing Technology (PST), the P12 Slim PWM PST fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data General Fan Speed: 300 - 2100 rpm Airflow: 41.1 CFM/ 71.53 m³/h Static Pressure: 1.45 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard RPM-Controll: PWM Connector: 4-Pin-Connector + 4-Pin-Socket Fan Bearing: Fluid Dynamic Bearing Elektrical Specification Typical Voltage: 12 V DC Startup Voltage: 4 V Current: 0.12 A Cable Length: 400 mm Size & Weight Length: 120 mm Width: 120 mm Heigth: 15 mm Weight: 85 g
The EK-Quantum Vector FTW3 RTX 3080/3090 D-RGB GPU cooler, has been further developed based on the 2nd generation Vector series and designed for the EVGA FTW3 RTX 3080 and 3090 graphics cards. The Vector water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acetal. Furthermore, the cooler has D-RGB lighting, with a total of 9 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 314 x 155 x 20.5mm (L x H x W) Material: Nickel-Plated Copper, Acetal Threads: G1/4" Scope of Delivery: EK-Quantum Vector FTW3 RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EVGA GeForce RTX 3080 FTW3 Gaming (10G-P5-3895-KR) EVGA GeForce RTX 3080 FTW3 Ultra Gaming (10G-P5-3897-KR) EVGA GeForce RTX 3080 FTW3 Ultra Hybrid Gaming (10G-P5-3898-KR) EVGA GeForce RTX 3080 FTW3 Ultra Hydro Copper Gaming (10G-P5-3899-KR) EVGA GeForce RTX 3090 FTW3 Gaming (24G-P5-3985-KR) EVGA GeForce RTX 3090 FTW3 Ultra Gaming (24G-P5-3987-KR) EVGA GeForce RTX 3090 FTW3 Ultra Hybrid Gaming (24G-P5-3988-KR) EVGA GeForce RTX 3090 FTW3 Ultra Hydro Copper Gaming (24G-P5-3989-KR)
PERFEKTE LÜFTER-REGULIERUNG DURCH PWM Die PWM-Funktion signalisiert über das Motherboard genauestens mit welcher Geschwindigkeit der Lüfter laufen muss. Damit wird eine maximale Kühlleistung bei minimalem Geräuschpegel garantiert. PWM SHARING TECHNOLOGY (PST) SENKT DEN GERÄUSCHPEGEL Durch die PST Funktion wird sichergestellt, dass alle Gehäuselüfter auf ein Signal arbeiten. Somit können alle Gehäuselüfter einheitlich eingestellt werden. INNOVATIVES DESIGN FÜR LEISE UND EFFIZIENTE BELÜFTUNG Durch das innovative Design der Lüfterblätter wird der Luftfluss verbessert und somit ist die Belüftung positiv beeinflusst. Das Lüfterrad wurde mit dem Fokus auf einen minimalen Geräuschpegel entworfen und bietet einen verbesserten Luftfluss und Druck. LANGE BETRIEBSDAUER Das Gleitlager ist mit einer hydrodynamischen Öl-Kapsel ausgestattet, somit wird vermieden, dass das Schmiermittel nicht verloren geht. Aus diesem Grund ist dieses Lager so leise wie ein Gleitlager hat aber eine wesentlich höhere und längere Betriebsdauer.
120-mm-PWM-Lüfter von Lian Li, einzigartiges Stecksystem für weniger Kabelsalat, mit adressierbaren RGB-LEDs, max. 1900 U/min, max. 99,45 m³/h Fördervolumen, max. 2,54 mm H2O statischer Druck, im 3er-Pack mit UNI HUB-Controller