Câble réseau à paires torsadées avec connecteurs RJ45Cat.6 S/FTP PIMFConnecteur avec manchon anti-accroc intégré pour la protection du loquet.Broches plaquées or pour une meilleure conductivité et la garantie d'un signal sans perteGarantie 10 ansCâble réseau S/FTP Cat.6 avec prise en charge de bande passante jusqu'à 250MHz et doté d'un système anti-accroc, avec contacts plaqués or pour les normes Ethernet jusqu'à 1GBase-T.Câble Cat.6 pour fréquences de fonctionnement jusqu'à 250MHz en version blindée avec tresse comme blindage général et blindage pour les paires individuelles (S/FTP). Les câbles de catégorie 6 sont répandus dans tous les secteurs professionnels. Ils sont idéaux pour les applications d'extension Gigabit Ethernet ou AV. Ces câbles sont fabriqués et testés selon la spécification ISO/IEC 11801. Les câbles sont emballés individuellement dans un sachet.Les contacts dorés garantissent des connexions fiables et anticorrosion sur le long terme. La conception robuste et le système anti-accroc évite d'endommager le loquet du connecteur lors de l'installation et de la déconnexion.Couleurs disponibles: Noir, Bleu, Vert, Gris, Orange, Violet, Rouge, Blanc, Jaune.Longueurs disponibles: 0.3m, 0.5m, 1m, 1.5m, 2m, 3m, 5m, 7.5m, 10m, 15m, 20m, 30m.
Tootja: ExtraLink Tootegrupp: PoE toiteplokk pakkuja tüüp: Power over Ethernet Injector sisendpinge: 18 V DC, 57 V DC väljundpinge: 18 V DC, 57 V DC Lisaandmed: 12 ports Gigabit Ethernet, Input ja väljund pinge 18 to 57 V DC
The UFiber splitter carries data from a UFiber OLT’s long-haul cable and shares it with multiple UFiber ONUs. Available with 4, 8, 16, or 32 outputs. PLC Splitters UF-SPLITTER-4 UF-SPLITTER-8 UF-SPLITTER-16 UF-SPLITTER-32 Input (1) SC/APC (1) SC/APC (1) SC/APC (1) SC/APC Outputs (4) SC/APC (8) SC/APC (16) SC/APC (32) SC/APC Insertion Loss with Connectors 7.4 dB 10.5 dB 13.7 dB 17.0 dB Uniformity Loss 0.6 dB 0.8 dB 1.2 dB 1.5 dB Polarization Dependent Loss 0.3 dB 0.3 dB 0.3 dB 0.3 dB Wavelength Bandwidth 1260-1650 nm 1260-1650 nm 1260-1650 nm 1260-1650 nm Return Loss (All Ports) 50 dB 50 dB 50 dB 50 dB Directivity 55 dB 55 dB 55 dB 55 dB Fiber Type G657A1 G657A1 G657A1 G657A1 Operating Temperature -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) -40 to 85° C (-40 to 185° F) Total Length 4.06m (13.32') 4.06 m (13.32') 4.06 m (13.32') 4.08 m (13.39') Weight 58 g (2.0 oz) 62 g (2.2 oz) 110 g (3.9 oz) 160 g (5.6 oz)
4 x Gigabit PoE+ ports 1 x Gigabit port 120W PoE power budget 10Gbps switching capacity Supports jumbo frames up to 9KB Hardened IP30 rated metal housing Includes DIN-Rail bracket and magnetic wall mount kit Operating temperature range of -40° – 75° C (-40° – 167° F) Redundant power inputs with overload current protection Alarm relay triggered by power failure Power supply sold separately (models: TI-S12048, TI-S24048, and 48VDC3000)
HG3-CC-S8080° Symmetrical Horn CC Antennas Gen2 Game Changing Sector AntennaSymmetrical Horn Carrier Class Gen2 is a scalar horn with the same size of main beam in horizontal and vertical planes equipped with N-female connectors. Since 2014 our horns address major weaknesses of mainstream sector antenna technologies and provide excellent noise rejection network scalability and throughput improvement.Approved by tens of thousands of installations all around the globe RF elements Symmetrical Horn Carrier Class Antennas are the new standard for fast and sustainable wireless. Unique Beam PerformanceSymmetrical Horn CC Antennas have a unique beam shape and characteristics. The beam section is circular: azimuth and elevation radiation angles are identical. No Side LobesSymmetrical Horn CC Antennas have no side lobes they literally focus energy into one main signal beam. Such behavior saves the most important resource in wireless - the spectrum. Thanks to these unique radiating properties the radio collects and propagates significantly less noise in comparison to current mainstream sector antennas. The problem of noise is directly connected to antenna side lobes - basically an unavoidable feature in most competitive products. Symmetrical Horn TP Antennas behave differently being basically "deaf" outside their main beam. Wideband PerformanceThe radiation pattern of Symmetrical Horn CC Gen2 is frequency independent and its gain is stable over the whole bandwidth of operation. These features make Symmetrical Horn CC Gen2 excellent sector antennas. Excellent Gain Across SpectrumSymmetrical Horn CC Gen2 Antenna covers ultra-wide bandwidth: 5180-6400 MHz! At the same time gain is stable over the whole band. Coverage Without NullMainstream sector antennas have a radiation pattern that is wide in azimuth but flat in elevation plane. If an AP is too high customers that are positioned too close will suffer from low AP signal. Breakthrough ScalabilitySymmetrical Horn CC Gen2 facilitates breakthrough scalability of wireless networks. Unique beam performance and great co-location characteristics allow for higher density sectors compared to traditional sector technology.Symmetrical Horn CC Gen2 features precise main beam widths spanning from 30 to 90 degrees: a range of models suitable for any situation. Ultimate Spectrum Efficiency For EveryoneSymmetrical Horn CC Gen2 antenna supports dense co-location of narrow sectors with excellent isolation. It unlocks the RF performance not possible before. This is an advantage horns have irrespective of radio platform used. N-type ConnectorsSymmetrical Horn Carrier Class Antennas feature N-type female connectors used with wide range of Radios. For example mimosaTM Cambium NetworksTM PMP450 LigoWaveTM and many others. Users of UBNTTM Rocket M5 Titanium MikroTikTM connectorized radios (NetBoxTM BaseBoxTM and NetMetalTM) can also utilize coaxial ports on Carrier Class Symmetrical Horn Antennas. Compact SizeSymmetrical Horn CC Gen2 Antenna is compact with only 20-25% footprint of traditional sector antennas. Compact size saves tower rental fees and makes it possible to install Symmetrical Horn CC Gen2 Antenna where regular sectors would not be allowed due to their shape and size. Robust and DurableSymmetrical Horn TP Antennas are solid aluminium bodies that are built to last and to resist any weather conditions. We use only the best materials: die cast stamped and extruded aluminium; high quality ABS plastic high density polyethylene; and stainless steel hardware.
QuMAX eXtra Range LTE offers the most powerful directional LTE antenna of all QuWireless antennas. It is dedicated to connections with long distance to base station. It is designed to have Teltonika RUT240/950/955/X09/X11 router installed inside IP67 enclosure. It is the first choice for fixed installations in industrial environment. There is also space for mounting internal genuine Teltonika GPS and Wi-Fi antennas inside the antenna enclosure. NOTE: There is also available version with extreme high gain antenna for high bands (2300-2700 MHz) – QuMax XR LTE High Band.
The UVC G3 Flex Professional Wall Mount is a flexible outdoor mounting option for the UVC G3 Flex Camera. It's IPX4-rated for splash resistance and supports upside-down mounting. The camera image orientation is automatically adjusted in the UniFi Protect software.
See Delocki adapter võimaldab teil ühendada tavalised kõrvaklapid, millel on kaks 3,5 mm stereopesa meesliitmikku, millel on standardne 3-pin viikude määramine, oma nutitelefoni või tahvelarvuti, millel on 3,5 mm 4-pin stereopesa emasport. Lihtsalt ühendage oma peakomplekti pistikupesa adapteri värvikooditud emasportidega. Spetsifikatsioon - Liitmik: 1 x stereopesa 3,5 mm 4-pin isasliitmik > 2 x stereopesa 3,5 mm 3-pin emasliitmik - Stereopesa emas: roosa: mikrofon / roheline: heli - Pinnide määramine 4-pin stereopesa isane OMTP-standardiga (ülemine > varrukas) Vasakpoolne heli - Parempoolne heli - AUX - GND - Värv: must - Kaabli pikkus: ca 10 cm (koos pistikutega) Süsteeminõuded - Vaba 4-pini stereopesa Pakendi sisu - Adapter
