Features • Converts a USB 2.0 Port to Ethernet Adapter • Best for Notebook PC Without Network Adapter But Requiring Broadband/LAN Connection Specifi cation • USB 2.0 Compliant. 480Mbps High Speed • IEEE802.3u Flow Control for Full Duplex Mode • Support USB Standard Commands • Support Suspend Mode & Wake-Up Resume • Effi cient TX/RX FIFO Auto Management • Bus-Powered, No Need for External Power Source • Chipset: MosChip
FEATURES 5 10/100Mbps Auto-Negotiation, Auto-MDIX Fast Ethernet RJ-45 ports Compliant with IEEE 802.3 / IEEE 802.3u standards IEEE 802.3x Flow Control support Provide 1K MAC address entries Compliant with Windows, Linux, and Mac Operating Systems. Store-and-Forward Switching method Non-blocking Architecture Diagnostic LEDs Plug & Play
Prepare yourself for Copper Gigabit Ethernet with TRENDnet´s Cat. 6 RJ-45 UTP Patch Panels. These patch panels are certified for 250Mhz Category 6, which are perfect for Copper Gigabit Ethernet connections. TRENDnet´s 16-port Cat. 6 Patch Panels are ideal for Ethernet, Fast Ethernet and Copper Gigabit Ethernet (1000Base-T) network applications. Using TRENDnet´s Cat. 6 products now, will prepare you for the high bandwidth network in the future without re-cabling your network. Gigabit ready rack mount 16-port panel Cat6 patch panels deliver a steady 250Mhz connection to copper Gigabit switches Ideal solution for Ethernet, Fast Ethernet and Gigabit applications Use with TRENDnet TC-PDT Punch Down Tool
Prepare yourself for Copper Gigabit Ethernet with TRENDnet´s CAT 5e RJ-45 UTP Patch Panels. These patch panels are certified 350Mhz CAT 5e, which are necessary for Copper Gigabit Ethernet. TRENDnet´s 16-port 350Mhz enhanced CAT 5 Patch Panels are ideal for Ethernet/Fast Ethernet/Gigabit Ethernet (1000Base-T) network applications. Using TRENDnet´s CAT 5e now, will prepare you for more bandwidth in the future without re-cabling your network. Rack mount 16-port Gigabit ready panel Cat5e patch panels deliver a steady 350Mhz connection to copper Gigabit switches Ideal solution for Ethernet, Fast Ethernet and Gigabit applications Use with TRENDnet TC-PDT Punch Down Tool
Rack mount 24-port Gigabit ready panel Cat5e patch panels deliver a steady 350Mhz connection to copper Gigabit switches Ideal solution for Ethernet, Fast Ethernet and Gigabit applications Use with TRENDnet TC-PDT Punch Down Tool
Prepare yourself for Copper Gigabit Ethernet with TRENDnet´s Cat. 6 RJ-45 UTP Patch Panels. These patch panels are certified for 250Mhz Category 6, which are perfect for Copper Gigabit Ethernet connections. TRENDnet´s 48-port Cat. 6 Patch Panels are ideal for Ethernet, Fast Ethernet and Copper Gigabit Ethernet (1000Base-T) network applications. Using TRENDnet´s Cat. 6 products now, will prepare you for the high bandwidth network in the future without re-cabling your network. - Meets ANSI/EIA/TIA 568-B.2-1 and ISO/IEC 11801 Standards - New version 110D IDC type terminal blocks (use 110 or Krone type tool) - Color-coded labeling for T568A and T568B wiring schemes - 180° angle type (horizontal) - 1000Base-T Copper Gigabit Ethernet ready - Compatible with Cat. 3, 4, 5, 5e, and 6 cabling - Works perfectly with TC-PDT Punch Down Tool - Operating temperature: -40° ~ 80° C (-40° ~ 176° F) - UL E157358 listed
Prepare yourself for Copper Gigabit Ethernet with TRENDnet´s CAT 5e RJ-45 UTP Patch Panels. These patch panels are certified 350Mhz CAT 5e, which are necessary for Copper Gigabit Ethernet. TRENDnet´s 48-port 350 Mhz enhanced CAT 5 Patch Panels are ideal for Ethernet/Fast Ethernet/Gigabit Ethernet (1000Base-T) network applications. Using TRENDnet´s CAT 5e now, will prepare you for more bandwidth in the future without re-cabling your network. Rack mount 48-port Gigabit ready panel Cat5e patch panels deliver a steady 350Mhz connection to copper Gigabit switches Ideal solution for Ethernet, Fast Ethernet and Gigabit applications Use with TRENDnet TC-PDT Punch Down Tool
100Base-TX to 100Base-FX Multi Mode MT-RJ Fiber Converter TFC-110MM (Version v3.2R) MT-RJ type multi-mode fiber port connects over distances of up to 2km (1.2miles) 10/100Base-TX port supports Auto-Negotiation, Auto-MDIX and Full-Duplex mode Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-110MM Fiber Converter works with the TFC-1600 chassis system or as a standalone unit. This converter is a Multi Mode MT-RJ Type fiber converter spanning distances up to 2km (1.2 miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (MT-RJ Type). Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX / 100Base-FX standards 1 x 10/100Base-TX auto-negotiation RJ-45 port Auto-negotiation 10/100Mbps connection speed and half/full-duplex mode on TX port Auto MDIX for 10/100Base-TX port 1 x 100Mbps fiber port with multi-mode MT-RJ type connector Status LED indicators for Power, Link/Activity, Full-Duplex, and Speed Dip-switch for full and half duplex selection on fiber port Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
Intelligent 10/100Base-TX to 100Base-FX Single Mode SC Fiber Converter TFC-110S15i (Version A1.1R) SC-type single-mode fiber port connects over distances of up to 15km (9.3miles) 10/100Base-TX port supports Auto-Negotiation, Auto-MDIX and Full-Duplex mode Supports port level SNMP management Functions as a stand alone converter or with the TFC-1600 fiber chassis The TFC-110S15i Intelligent Fiber Converter works with the TFC-1600 chassis system or as standalone unit. This converter is a Single Mode SC-Type fiber converter that supports SNMP management and spans distances of up to 15km (9.3 miles). Ports include 1 x 10/100Base-TX (RJ-45) port and 1 x 100Base-FX fiber port (SC-Type). Compliant with IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX / 100Base-FX standards 1 x 10/100Base-TX auto-negotiation RJ-45 port Auto MDIX for 10/100Base-TX port and one 100Mbps fiber port with single-mode SC-type connector Provides Dip switch to set: Fiber (FDX/HDX), Ethernet (Forced/Auto-Negotation), Ethernet Speed (10M/100M), LLR (Enable/Disable), LLCF (Enable/Disable) Support LLCF (Link Loss Carry Forward, Link Pass Through) Support LLR (link Loss Return) for FX port Monitor and configure Ethernet or Fiber’s duplex mode, speed, LLCF, LLR, and receive link down information via management module TFC-1600MM and chassis TFC-1600 Status LED indicators for Power, Link/Activity, Full-Duplex, Link Fail, and Speed Wall mountable Optional 19” system chassis with redundant power supply (TFC-1600), holds up to 16 TFC series Media Converters 3-year limited warranty
Protect your network from catastrophic lightning strikes and electrical surgeUse with TRENDnets High Power Wireless Outdoor Access Point (TEW-455APBO)Multiple lightning strike and bi-directional protectionSave repair expenses: no need to replace equipment after a lightning strike
802.11b/g/n USB Nano wireless adapter Compatible with 802.11b/g/n, up to 300 Mbps network data transfer rate in 802.11n mode Ad-hoc and Infrastructure operation modes. WEP, WPA, WAP2 encryption support Ultra small design (34.4 mm x 18 mm x 7.7 mm)
- 12 x Gigabit RJ-45 ports;- 10 inch wide patch panel is well suited for home and SMB applications;- Designed for Category 6 cabling;- Includes cable management holders, tie, and port labels;- Use with TRENDnet TC-PDT Punch Down Tool.The 12-Port Cat. 6 Unshielded Patch Panel, model TC-P12C6, provides a 250MHz connection to 12 x Gigabit RJ-45 Ethernet ports. This 10 inch wide patch panel is well suited for home and SMB applications. Control cable clutter with included removable cable pass-through holders and cable ties. A writing surface above each port allows users to label respective connections. Use with TRENDnet’s Punch Down Tool with 110 and Krone Blade, model TC-PDT, and RJ-11/RJ-45 Crimp/Cut/Strip Tool, model TC-CT68.- 12 x 1000Base-T Gigabit RJ-45 ports;- Supports a 250MHz connection;- 10 inch wide patch panel;- Cat. 6 color coded labeling for T568A and T568B wiring schemes;- IDC terminal blocks are compatible with 110 and Krone style connectors;- Labels above each port;- Cat. 6 transmission performance compliant with ANSI, TIA, and EIA 568 B.2 standards;- Nylon cable ties and holders included.Kaabeldustehnoloogia1000Base-TVõrgu omadusedGigabit EthernetPortide hulk12Pistmik(ud)RJ-45Toetatud kaablitüübidCat6Toote värvMustSertifikaatCE, FCCLaius254 mmKõrgus30 mmSügavus44 mmKaal230 g
The 8-Port Cat. 6 Unshielded Patch Panel, model TC-P08C6, provides a 250MHz connection to 8 x Gigabit RJ-45 Ethernet ports. This 10 inch wide patch panel is well suited for home and SMB applications. Control cable clutter with included removable cable pass-through holders and cable ties. A writing surface above each port allows users to label respective connections. Use with TRENDnet’s Punch Down Tool with 110 and Krone Blade, model TC-PDT, and RJ-11/RJ-45 Crimp/Cut/Strip Tool, model TC-CT68.Features:-8 x 1000Base-T Gigabit RJ-45 ports;-Supports a 250MHz connection;-10 inch wide patch panel;-Cat. 6 color coded labeling for T568A and T568B wiring schemes;-IDC terminal blocks are compatible with 110 and Krone style connectors ;-Labels above each port;-Cat. 6 transmission performance compliant with ANSI, TIA, and EIA 568 B.2 standards;-Nylon cable ties and holders included.Kaabeldustehnoloogia1000Base-TPortide hulk8Pistmik(ud)RJ-45Toetatud kaablitüübidCat6Toote värvMustSertifikaatCE, FCCLaius44 mmKõrgus30 mmSügavus254 mmKaal205 g