Layer 2 Features Link Aggregation Control Protocol (LACP) 4K VLAN GVRP (GARP VLAN Registration Protocol) Port Isolation STP/RSTP/MSTP IGMP Snooping Quality of Service 4 priority queues Support IEEE 802.1P DSCP QoS Rate limit feature Security Strategies IP-MAC-Port-VID Binding Access Control List (L2~L4 ACL) 802.1x and RADIUS Authentication Support DoS defend Port Security SSL and SSH encryptions Management Web-based GUI Command Line Interface SNMP v1/v2c/v3 RMON (1,2,3,9 group)
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
The PoE Splitter TL-POE10R fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af PoE compliant PSE (Power Source Equipment) or PoE Supplier Adapter, such as TP-LINK's TL-SF1008P or TL-POE150S, or other equivalent product, to deliver 12V, 9V or 5V Direct Current to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc. IEEE 802.3af compliant Adjustable output power Plug-and-Play installation
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models) Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models) Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Xtreme Wireless AC1200 Dual Band USB Adapter Draft 802.11ac support, up to 867 Mbps data rate Backward Compatible with 802.11a/b/g/n, 2.4/5Ghz High speed USB 2.0 interface WEP, WPA, WAP2 encryption support. Support WPS (PIN or PBC methods), external WPS button to connect Access Point easily Flash like formfactor Without USB cradle
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Complying with the 802.11n standard, the ZyXEL WAP3205 v2 Wireless N300 Access Point can enhance wireless speeds up to 300 Mbps* and extend the coverage. With the AP/Universal Repeater/Client mode switch, you can setup the operating modes of WAP3205 v2 according to your needs easily and instantly.
Features and Benefits 4 IEEE 802.3at compliant PoE and Ethernet combo ports Up to 30 watts at 24/48 VDC per PoE port Intelligent power consumption detection and classification Redundant dual VDC power inputs -40 to 75°C operating temperature range (T models) Introduction The EDS-P206A-4PoE switches are smart, 6-port, unmanaged Ethernet switches supporting PoE (Power-over-Ethernet) on ports 1 to 4. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-P206A-4PoE switches enable centralization of the power supply and provide up to 30 watts of power per port. The switches can be used to power IEEE 802.3at compliant powered devices (PD), eliminating the need for additional wiring, and support IEEE 802.3/802.3u/802.3x with 10/100M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical solution for your industrial Ethernet network. In addition, the built-in relay warning function alerts network engineers when power failures or port breaks occur.
Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models) Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
Features and Benefits Full-gigabit Ethernet ports IEEE 802.3af/at, PoE/PoE+ standards Up to 30 watts output per PoE port 24/48 VDC flexible redundant power inputs Intelligent power consumption detection and classification Smart PoE over current and short circuit protection -40 to 75°C operating temperature range (T models) Introduction The EDS-G205A-4PoE switches are smart, 5-port, unmanaged full-gigabit Ethernet switches supporting Power-over-Ethernet on ports 2 to 5. The switches are classified as power source equipment (PSE), and when used in this way, the EDS-G205A-4PoE switches enable centralization of the power supply, providing up to 30 watts of power per port and reducing the effort needed for installing power. The switches can be used to power IEEE 802.3af/at standard devices (PD), eliminating the need for additional wiring, and they support IEEE 802.3/802.3u/802.3x with 10/100/1000M, full/half-duplex, MDI/MDI-X auto-sensing to provide an economical high-bandwidth solution for your industrial Ethernet network.
Features and Benefits 10/100/1000BaseT(X) and 1000BaseSX/LX/LHX/ZX supported Link Fault Pass-Through (LFP) (media converters should work as a pair) Power failure, port break alarm by relay output Redundant power input -40 to 75°C operating temperature range (T models) Designed for hazardous locations Introduction The IMC-101G industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media conversion in harsh industrial environments. The IMC-101G's industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101G converter comes with a relay output warning alarm to help prevent damage and loss. All IMC-101G models are subjected to a 100% burn-in test, and are available in models that support a standard operating temperature range of 0 to 60°C, and an extended operating temperature range of -40 to 75°C.
The Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit Power over Ethernet Plus (PoE+) signal. Connect this device to a non-PoE Gigabit switch and then run an Ethernet cable for up to 100 meters (328 ft.) to network PoE+ or PoE devices. The integrated power supply reduces installation clutter.Full Duplex Gigabit speedsConverts a non-PoE Gigabit port to a PoE+ or PoE Gigabit portIntegrated power supplyNetwork distances of up to 100 meters (328 feet)Save on installation and equipment costs
Features and Benefits 10/100/1000BaseT(X) and 1000BaseSX/LX/LHX/ZX supported Link Fault Pass-Through (LFP) (media converters should work as a pair) Power failure, port break alarm by relay output Redundant power input -40 to 75°C operating temperature range (T models) Designed for hazardous locations Introduction The IMC-101G industrial Gigabit media converters are designed to provide reliable and stable 10/100/1000BaseT(X) to 1000BaseSX/LX/LHX/ZX media conversion in harsh industrial environments. The IMC-101G's industrial design is excellent for keeping your industrial automation applications running continuously, and each IMC-101G converter comes with a relay output warning alarm to help prevent damage and loss. All IMC-101G models are subjected to a 100% burn-in test, and are available in models that support a standard operating temperature range of 0 to 60°C, and an extended operating temperature range of -40 to 75°C.
Features and Benefits 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X Link Fault Pass-Through (LFP) Power failure alarm by relay output (LV model only) -40 to 85°C operating temperature range Redundant dual DC power inputs Integrated high-reliability power supply eliminates the need for external power transformer Compliant with EN 50121-4 and essential sections of EN 50155 Introduction The PTC-101 Ethernet-to-fiber media converters convert from 10/100BaseT(X) to 100BaseFX. Models are available with either SC, ST, or LC connectors. The PTC-101 converters eliminate the need for additional wiring, and support IEEE 802.3 and IEEE 802.3u/x protocols with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing to provide a total solution for your industrial Ethernet networks. The PTC-101 is compliant with the essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD and vibration.
Features and Benefits 10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X Link Fault Pass-Through (LFP) Power failure alarm by relay output (LV model only) -40 to 85°C operating temperature range Redundant dual DC power inputs Integrated high-reliability power supply eliminates the need for external power transformer Compliant with EN 50121-4 and essential sections of EN 50155 Introduction The PTC-101 Ethernet-to-fiber media converters convert from 10/100BaseT(X) to 100BaseFX. Models are available with either SC, ST, or LC connectors. The PTC-101 converters eliminate the need for additional wiring, and support IEEE 802.3 and IEEE 802.3u/x protocols with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing to provide a total solution for your industrial Ethernet networks. The PTC-101 is compliant with the essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD and vibration.
Features and Benefits Multi-mode or single-mode, with SC or ST fiber connector Link Fault Pass-Through (LFP) -40 to 75°C operating temperature range (T models) DIP switches to select FDX/HDX/10/100/Auto/Force Introduction The IMC-21A industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The converters can operate reliably in temperatures ranging from -40 to 75°C. The rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21A converters are easy to mount on a DIN-Rail or in distribution boxes.
Features and Benefits Multi mode, single mode with SC or ST fiber connector Link Fault Pass-Through (LFP) (media converters should work as a pair) -10 to 60°C operating temperature range DIP Switch to select FDX/HDX/10/100/Auto/Force Introduction The IMC-21 industrial media converters are entry-level 10/100BaseT(X) to 100BaseFX media converters designed to provide reliable and stable operation in harsh industrial environments. The IMC-21 is a cost-effective solution that runs on either a 12 to 45 VDC power input or 18 to 30 VAC power input. The IMC-21 can operate reliably in temperatures ranging from -10 to 60°C, and the rugged hardware design ensures that your Ethernet equipment can withstand demanding industrial conditions. The IMC-21 is easy to mount on a DIN-Rail or in distribution boxes.
