SMALLRIG 2243 Cage for Nikon Z6/Z7. The cage is fixed on the camera via the bottom 1/4"-20 threaded hole and features a M2.5 threaded hole on the left side as a second lock point to prevent the camera form twisting. The one piece aluminum cage features multiple 1/4"-20, 3/8"-16 and ARRI 3/8" threaded holes for accessories attachment. Additionally, it features a cold shoe on the top for microphone mount and a nato rail on the left allows for quick release your setup. The bottom features multiple 1/4"-20 and 3/8"-16 threaded holes allows for mounting tripod plates. The cage features two M4 threaded holes which is used to mount FTZ Lens Adater Mount 2244 to protect the lens mount. Optional Arca Baseplate 2092 could be attached to the bottom for 15mm LWS system, as well as the cable clamp 1679 to protect the HDMI port.
Kerge ja kompaktne ministatiiv, mis on suurepärane kaaslane kompakt-, hübriidkaamera või väiksema peegelkaamera kasutajale. See on kerge, mugav kaasas kanda ja kokkuvoldituna kõigest 20 cm pikkune. Statiivi integreeritud kuulpea teeb kaadri kohandamise eriti mugavaks. Kokkupanduna toimib Kombi statiiv ideaalselt ka kaamera käepidemena.
Canon HG-100TBR ühendab mugava käepideme ning ministatiivi ühte kompaktsesse korpusesse. Kasuta seda käepidemena vloge filmides või statiivina grupifotosid tehes. Statiivile saab kinnitada ka välise mikrofoni (müügil eraldi) ning kasutada komplektis olevat kaugjuhtimispulti.
Vastupidava konstruktsiooniga Gitzo videopea; Kandevõime: kuni 4 kg; Ette- ja tahakallutus & panoraampööre; Pikk juhthoob pea juhtimiseks; Arca-swiss ühilduv kiirkinnitusplaat
Ette nähtud: Foto- ja videokaamerate jaoks; Pikkus kokkupandud kujul (cm): 36,5; Maksimaalne pikkus lahtivõetud kujul (cm): 106,5; Reguleeritava kõrgusega kesksammas: On; 3D mehhanism: On; Jalgade läbimõõt (cm): 1,68; Jalgade kummitallad: On;...
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Manfrotto Element Traveller. Otstarve: Digitaalne/filmikaamera, Maksimaalne kaal (mahutavus): 4 kg, Jalgade arv: 3 jalg(ad). Kaal: 1,05 kg, Pikkus kokkuvolditud kujul: 32 cm, Jala läbimõõt: 3,7 cm
Manfrotto MKBFRLA4BK-BH. Maksimaalne kaal (mahutavus): 8 kg, Jalgade arv: 3 jalg(ad), Kõrgus (maksimaalne): 151 cm. Kaal: 1,59 kg, Pikkus kokkuvolditud kujul: 40 cm, Jala toru diameeter (min): 1,2 cm
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Octopod on kompaktne ja kerge painduvate jalgadega statiiv – ideaalne lahendus eriskummalistelt pindadelt huvitavate võtete püüdmiseks. Painuta see puuoksa või aialipi ümber, aseta ebatasastele kividele ning ole mureta, sest Octopod kohandub kõigi pindadega ning selle kummeeritud jalad tagavad stabiilsuse sõltumata, kuidas või kuhu statiivi asetanud oled. Lisaks on Octopodil praktiline integreeritud kuulpea, mida on eriti lihtne kasutada, kuid tagab oma topeltlukustussüsteemiga ka ülima turvalisuse. Tänu väikesele kiirkinnitusplaadile on kaamerat või telefoni eriti mugav statiivile kinnitada ja sealt eemaldada. Koos statiiviga on komplektis ka klamberkinnitus, millega on mugav statiivi kasutada telefoniga pildistamiseks või videote üles võtmiseks. Kinnitusel on kaks kinnitusava, mis võimaldavad telefoni asetada nii vertikaalselt kui horisontaalselt. Kokkupanduna on Octopod vaid 19,5 cm pikk ning kaalub kõigest 105 grammi – tänu sellele on statiivi ülimalt mugav kaasas kanda. Sobilik nutitelefoni või kompaktkaameraga kasutamiseks – talub koormust kuni 1 kg.
Gitzo Mini Traveler on spetsiaalselt loodud profifotograafidele ja edasijõudnud harrastajatele, kelle varustusse kuuluvad hübriidkaamerad või peegelkaamerad koos lühikeste objektiividega. Mini Traveler on nagu nimigi viitab – ministatiiv –, mis pakub minimaalse kaalu juures stabiilset tuge. Tänu tipptasemel süsinikust eXact jalgadele ja alumiiniumist statiivipeale, kaalub Mini Traveler vaid 265 grammi (ainult jalad 117 g). See on jalaotsast "pealaeni" konstrueeritud kvaliteetsetest materjalidest, luues kombinatsiooni, mida saad usaldada. Statiiv koosneb eraldatavatest jalgadest ja alumiiniumist statiivipeast, mis kannab kuni 3 kg suurust raskust. Ilma statiivipeata võib Mini Traveler jalgadele asetada lausa 25 kg suuruse raskuse. Mini Traveler on varustatud uhiuue (patendiootel) Pull&Fix jalanurga seadistusmehhanismiga, mis võimaldab statiivijalad asetada kahe nurga alla. Statiivijalgadel on ka kummist otsakud, mis tagavad stabiilsuse ka libedamatel pindadel. Nagu iga Gitzo toode, on ka Mini Traveler loodud kerget kaalu, suurepärast koostekvaliteeti ja kasutajasõbralikkust silmas pidades.
Manfrotto MKBFRTA4RD-BH. Otstarve: Digitaalne/filmikaamera, Maksimaalne kaal (mahutavus): 8 kg, Jalgade arv: 3 jalg(ad). Kõrgus (maksimaalne): 150 cm, Kõrgus (minimaalne): 40 cm, Kaal: 1,49 kg