PanzerGlass - Parim kaitse ekraanile!PanzerGlass on loodud, et kaitsta ekraani löökide, kriimude ja mustuse eest. Hoolimata üliõhukesest 0,4mm paksusest on mitmete testide põhjal
Do you spend a lot of time at your laptop? Take care of your comfort! The Orico PFB-A24-BK-BP stand will allow you to position your device at the right angle - it allows 7-position height adjustment. The accessory was made of durable POM plastic, and thanks to the non-slip pads it is extremely stable. An interesting addition is the rounded wrist rests, which will provide you with even more comfort.Solid constructionThe stand is made of high-quality POM plastic, which is distinguished by its exceptional strength and resistance to damage. What's more, thanks to its well-thought-out design, it will easily hold even a heavier laptop and ensure its stability. So you can enjoy greater comfort while typing. The accessory also has silicone pads that prevent the device from slipping.
The AXAGON ACU-DPQ100 GaN travel wall charger enables fast charging of up to three mobile devices at the same time. With 100W of total power, the charger charges notebooks, phones and other mobile devices at the highest possible speed. The adapter offers a standard USB-A connector, but also two double-sided USB-C connectors. Compact size and high performance is given by the new GaN technology used. The components used with Galium Nitride work with high efficiency, which allows you to achieve high performance with a small size. The charger is equipped with two Power Delivery 3.0 / Quick Charge 4+ USB Type-C outputs and one Quick Charge 3.0 USB Type-A output, enabling fast charging of not only smartphones and tablets, but also laptops. The Quick Charge 4+ technology allows up to 4 times faster charging of phones than a standard USB charger. Power Delivery 3.0 technology not only supports charging of modern phones, but also enables 100W PD charging of powerful laptops. The charger supports 20W PD charging.
Multiport USB-C 3.2 Gen 1 hub AXAGON HMC-6H4A expands your laptop, computer or phone with six ports. You can easily and quickly connect up to four USB devices and HDMI display to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology. The USB-C hub will provide you with a simple and compact 6in1 docking station for notebook like MacBook Pro. The USB hub offers four USB outputs with standard USB-A connectors. The hub can also handle permanent connection of several external drives simultaneously. Transfer rate up to 5Gb/s thanks to the fast USB 3.2 Gen 1 interface. USB-C connector is dedicated to power up a mobile phone or laptop using Power Delivery 3.0 technology by power up to 100W. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one USB-C port. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. Popular gaming resolution WQHD 2560 x 1440px at 60Hz or FullHD 1920 x 1080px at 60, 100 and 120Hz max. are also supported. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Elegant aluminum body ensures mechanical resistance and quality cooling. The glossy upper part with a decent backlit logo underlines the premium look of the hub. Port replicator is an ideal accessory for laptops without USB-A connectors and video output. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. You can connect a flash drive, keyboard, mouse, monitor, TV or projector to your phone. Input: 1x USB 3.2 Gen 1 / SuperSpeed USB port, USB-C male connector. Backward compatible with USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Connecting USB type C male connector on a fixed 20cm long cable. USB outputs: 4x SuperSpeed USB port, USB-A female connector. 1x USB type C Power Delivery port (only charging), USB-C female connector. Supports transmission rates 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 1 interface used (theoretically up to 5 Gbit/s). USB-C hub can handle the connection of several external drives at the same time. HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. WQHD resolution 2560 x 1440 at 60 Hz max. FullHD resolution 1920 x 1080 at 60, 100, 120 Hz max. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. At the same time, support from the device (laptop, phone) and the operating system is required. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Support up to 8-channel LPCM audio, compressed audio (AC-3, DTS) and HBR audio formats. Support sampling rate up to 192kHz and up to 24-bit audio depends on source and end device, i.e. laptop/phone and TV/monitor/ AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminum body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. The backlight of the logo indicates with a permanent glow that the hub is connected to the computer. The high quality shielded cable ensures high communication speed and minimal undesirable interference. Dimensions 110 x 35 x 12 mm. Weight 54 g (incl. cable). USB cable length 20 cm. Supported operating systems: Microsoft Windows 10 / 11, Mac OS, Linux, Android and Chrome OS. Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 20 cm long cable, multilingual manual CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box with a hanging hole.
RELIABLE POWER FROM A LIGHTWEIGHT, PORTABLE ADAPTER The ROG AC100-00 is a 100W AC Adapter with a USB Type-C (USB-C) connector and is designed for ROG laptops that support charging via USB-C. It supports international voltage standards (100-240V, 50-60Hz), and includes USB Power Delivery (PD) 3.0 technology that automatically detects and supplies 5V/3A, 9V/3A, 15V/3A and 20V/5A. EASY USB TYPE-C CHARGING 100W output via USB-C automatically supplies the right current and voltage, and the 160cm cable and 100-240V input give you portable flexibility in a lightweight package. MULTIPLE SAFETY PROTECTION Multiple output protection, including Over Voltage Protection (OVP), Over Current Protection (OCP), Over Temperature Protection (OTP) and Short Circuit Protection (SCP) are built-in to keep you and your laptop safe.
USB hub with versatile connectivity options, high speed of up to 5 Gbps, powerful Power Delivery feature, support for 8K/30Hz and 4K/120Hz, compatibility with various operating systems
Multiport USB-C 10Gbps hub AXAGON HMC-12GM2 GEN2COMBO 12in1 expands your laptop, computer or phone with eleven ports and external box for M.2 disk. You can easily and quickly connect up to two monitors, four USB devices, a Gigabit Ethernet network, headphones, an SD card reader, and an NVMe or SATA M.2 SSD o your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 12in1 docking station for notebook like MacBook Air or Pro. The USB hub offers three USB outputs with standard USB-A connectors. Two with 5Gbps speeds and a third with 10Gbps speeds for more demanding devices. It also offers a USB-C 10Gbps data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. The second USB-C connector is reserved only for powering and simultaneous charging of laptops using Power Delivery 3.0 technology with a power of up to 100W. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI and DisplayPort outputs provide a high-quality picture. Whether used alone or simultaneously, the ports offer resolutions up to 4K/60Hz Ultra HD and support multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Gigabit network card extends your computer by a fast and stable network connection, adds the missing RJ-45 network connector or another network card.Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. Active cooling is provided by a silent integrated fan, which cools both the M.2 disk and the body of the hub itself. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. The 50 cm USB-C cable is detachable and can be replaced with a longer cable if needed. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3/4. Connection via reversible USB type C female connector. USB outputs: 1x USB 10Gbps port, USB-A female connector. 2x USB 5Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub can handle the connection of two external drives simultaneously. Video outputs: 1x HDMI A port, HDMI A female connector. 1x DP port, DisplayPort female connector. Video resolution and properties: Maximum supported resolution when each port is connected individually is 4K / 4096 x 2160 at 60 Hz. 2 simultaneously connected monitors - up to 4K/60Hz on both monitors. For proper video output function, the hub must be plugged into a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) version 1.4 or higher, or a USB-C port with Thunderbolt 3/4 support. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 100W - 20V/5A. Required PD support from the device (laptop, phone) and a suitable PD wall charger. The card reader - two slots: Slot Micro SD: microSD / microSDHC / microSDXC / TransFlash. Slot SD: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter - miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x / 4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. Copying from card to card. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. RJ-45 output: Gigabit Ethernet interface with RJ-45 connector for UTP or STP cable connection. Supported transmission rates for the Ethernet interface 10/100/1000 Mb/s. Supported IEEE 802.3 10Base-T, IEEE 802.3u 100Base-TX, IEEE 802.3ab 1000Base-T specifications. 10/100/1000 Mbit/s auto-detection. Supports IPv4 / IPv6 packet Checksum Offload Engine (COE) to reduce processor load, including IPv4 IP/TCP/UDP/ICMP/ IGMP & IPv6 TCP/UDP/ICMPv6 checksum control and generation. Supports TCP Large Send Offload V1 and V2. Supports IEEE 802.1P Layer 2 priority encoding & decoding. Support IEEE 802.1Q VLAN tagging. Supports IEEE 802.3az EEE (Energy Efficient Ethernet) - reduce power consumption at rest. Supports Jumbo frame. Supports full-duplex transmissions with IEEE 802.3x flow control and half-duplex transmissions with back-pressure flow control. Supports Auto MDI/MDIX - crossover detection and auto-correction eliminats the need for crossover cables. Supports hardware Cyclic Redundancy Check (CRC) to detect transmission errors. Supports Pair Swap/Polarity/Skew Correction. Wake-on-LAN function in different modes: Supports sleep mode and remote Wake Up via Magic Packet, Microsoft Wakeup Frame, Microsoft Wake Packet Detection, ECMA-393 proxZzzy for sleeping hosts, RealWoW! and also Link Change Wake-up. Advanced Power Management features: The adapter supports advanced power management and supports advanced power saving e.g. when the Ethernet cable disconnection. Supported Power Management technologies are e.g. Advanced Configuration Power management Interface (ACPI), Link Power Management (LPM) or IEEE 802.3az EEE (Energy Efficient Ethernet) and others. Audio output / input: 1x 3.5 mm jack for headset, headphones or active speakers, 2-channel analog stereo output 48 kHz @ 16 bit for playback, 1-channel analog mono microphone input 48 kHz @ 16 bit for recording. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 50 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub USB-C cable 50 cm long mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box
Multiport USB-C 10Gbps hub AXAGON HMC-6GM2 GEN2COMBO 6in1 expands your laptop, computer or phone with five ports and external box for M.2 disk. You can easily and quickly connect up two USB devices, SD card reader, one monitor, and an NVMe or SATA M.2 SSD to your computer via the reversible USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The USB-C hub will provide you with a simple and compact 6in1 docking station for notebook like MacBook Air or Pro. The USB hub offers two USB 10Gbps outputs. One with standard USB-A and one with USB-C data connector. The hub can also handle permanent connection of two external drives simultaneously. Thanks to the fast USB 3.2 Gen 2 interface, the hub's transfer rate is up to 10Gbps. Another USB-C connector is reserved only for charging phones or laptops using Power Delivery 3.0 technology with up to 100W of power. Connect a suitable USB-C Power Delivery charger into the hub and connect the hub to a laptop that supports Power Delivery. This saves one USB-C port. HDMI output provides high quality image up to 4K/60Hz Ultra HD resolution and supports multi-channel audio transmission. High frequencies at popular gaming resolutions of 2K/144Hz or FullHD/240Hz are also supported. Thanks to HDR (high dynamic range) support, you can enjoy a significantly expanded range of colors and contrasts without restrictions. For video outputs to work properly, the laptop must have a USB-C port with DisplayPort Alternate Mode (DP Alt Mode) support or a Thunderbolt 3 port and above. You can connect a NVMe or SATA M.2 SSD drive thanks to the built-in slot on the back. The multiport hub thus becomes an external drive. M.2 cards can be single-sided or double-sided up to a size of 22x80 mm. The external M.2 box has no capacity limitations for SSDs and supports modern functions such as TRIM, UASP and enables reading S.M.A.R.T. disk status monitoring information. Card reader supports all versions of SD and microSD cards including SDXC and microSDXC with capacity up to 2TB. Thanks to the high-speed USB interface, you can make the most of the potential of modern memory cards. The card reader enables simultaneous handling of cards in both slots and direct copying between them. The elegant aluminum body ensures not only mechanical resistance, but also passive cooling. You will also be pleased with the finely textured surface, which does not leave fingerprints. The port replicator is the ideal accessory for laptops with a lack of USB connectors, memory or video outputs. Fixed USB-C cable 20 cm long. You can use your current USB peripherals without having to purchase new ones. Thanks to the Plug and Play and Hot Plug functions, connecting the hub itself is very simple without complicated installation, and peripherals can also be easily connected and disconnected while the computer is running. The hub does not afraid of connection to phones with a USB-C connector. For example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: USB 10Gbps (USB 3.2 Gen2). Compatible with Thunderbolt 3 and 4. Connection via reversible USB type C male connector on a fixed 20 cm cable. USB outputs: 1x USB 10Gbps port, USB-A female connector. 1x USB 10Gbps port, USB-C female connector. 1x USB Power Delivery 100W (only for charging), USB-C female connector. USB-C hub handle the connection of two external drives simultaneously. HDMI output: 1x HDMI A port, HDMI A female connector. Video resolution and properties: Maximum supported resolution 4K / 4096 x 2160 at 60 Hz. For the video output function, the hub must be connected to a USB-C port supporting DisplayPort Alternate Mode (DP Alt Mode) or to a USB-C port supporting Thunderbolt 3/4. A suitable OS is also required. The video output function will not be available without these requirements. HDR support (High dynamic range, 10bit support) - realistic reproduction of light and dark details. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signalling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) full support. Supports up to 8-channel LPCM audio, compressed audio (AC-3, DTS), and HBR audio formats. Supports sample rates up to 192 kHz and up to 24-bit audio - depends on the source and destination device, i.e. laptop/phone and TV/monitor/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the wall charger via USB-C hub Maximum power supply power via PD USB-C hub output 100W - 20V/5A Required PD support from the device (laptop, phone) and a suitable PD wall charger The card reader - two slots: Micro SD slot: microSD / microSDHC / microSDXC / TransFlash. SD slot: SecureDigital / SDHC / SDXC, MultiMedia Card, MMC 4.0, MMC Dual Voltage, MMC mobile, RS-MMC, with adapter miniSD, microSD / microSDHC / microSDXC, MMC Micro. The reader supports the following flash card specifications: SD 1.0/1.1 (SD - Secure Digital, up to 2GB). SD 2.0 (SDHC - Secure Digital High Capacity, up to 32GB). SD 3.0 (SDXC - Secure Digital eXtended Capacity, up to 2TB). MMC and eMMC 3.x /4.0 / 4.1 / 4.2 / 4.3 / 4.4 / 4.5 / 5.0 (8-bit). Supports SD 3.01 and SD Jukebox applications (CPRM functions). Supports Ultra High Speed bus UHS-I (SDR12/SDR25/SDR50/DDR50/SDR104) speeds up to 104 MB/s. Supports hardware ECC (Error Correction Code) function and CRC (Cyclic Redundancy Check) function. 2 LUN - the reader is indicated as two disk drives in the file manager. M.2 SSD slot: NVMe & SATA M.2 SSD disks. Designed for M key or B+M key format cards. NGFF 75-pin M-key slot for M.2 drives. Supports M.2 drives with a size of 2242, 2280 mm. Support of both one-sided and double-sided M.2 SSDs. Compliant with PCI Express Base Specification Revision 3.1a specification. Compliant with NVM Express 1.3 specification. Compliant with Serial ATA 3.2 specification (SATA/600), bit rates of up to 6 Gb/s (600 MB/s). Compliant with USB Mass Storage Class specification. Supports UASP (USB Attached SCSI) for faster data transmission in Windows 8 and later. Support of TRIM functionality to limit gradual degradation of the SSD performance over time. Support for booting from an SSD in the hub's M.2 slot. Other features: Compatible with USB 10Gbps (USB 3.2 Gen 2). Backward compatible with USB 5Gbps (3.2 Gen 1 / USB 3.0). Supports transmission rates 10.000 / 5.000 Mbit/s. Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub and M.2 disk operation is better dissipated and transferred to the surroundings. The LED indicates the data transfer of the M.2 drive. High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 149 x 65 x 17 mm. Weight 178 g (incl. cable). USB cable length 20 cm. Supported operating systems: Windows 10 / 11 and later, macOS, Linux, Chrome OS and Android. Compatibility depends on used OS and support from device manufacturer. DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Graphics card drivers may also affect the correct operation of the product. We recommend downloading the latest version of drivers. Package contains: USB-C hub with fixed 20 cm long cable mounting material multilingual manual in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / TR / BG / CN / ARA packed in a cardboard box
Superspeed USB-C 3.2 Gen 2 hub AXAGON HMC-5G2 SPEEDSTER 5H expands your laptop, computer or phone with five ports. You can easily and quickly connect up to four USB devices and HDMI display to your computer at the same time via the double-sided USB-C connector. You also get the possibility to supply laptop using Power Delivery technology at the same time. The hub will provide you with a simple and compact laptop docking station. The USB hub offers a total of four USB outputs - two with standard USB-A connectors and two with modern USB-C connectors. Thanks to the advanced USB 3.2 Gen 2 interface, you can connect high-speed devices such as NVMe M.2 external drives to all outputs at up to 2x higher speed 10 Gb/s compared to standard Generation 1 hubs with a speed of only 5 Gb/s. The hub can handle permanent connection of several external drives simultaneously and USB-C ports allow charging of phones and tablets with a current of up to 3A. One of the USB-C ports also allows you to use the Power Delivery function to power up a laptop or mobile phone via hub from a charger. Connect the USB-C Power Delivery charger to the hub and connect the hub to the laptop. This saves one port, which could be useful. The condition is a laptop with Power Delivery charging support from the USB-C port and a suitable PD charger. HDMI output provides high quality image up to 4K/30Hz Ultra HD resolution and supports multi-channel audio transmission. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. The compact and slim aluminum body looks great and also ensures mechanical resistance and quality cooling. The finely structured surface with no fingerprint remains will also please you. The USB-C hub is an ideal accessory for laptops without USB-A connectors and video output such as the MacBook Pro. You can use your existing USB peripherals without having to buy new ones. Thanks to the Plug and Play and Hot Plug functions, the connection of the hub itself is very simple without complicated installation. It is also possible to easily connect and disconnect peripherals while the computer is running. The hub does not afraid of connection to phones with a USB-C connector - for example, you can connect a flash drive, keyboard, mouse, display, TV or projector to the phone. Input: 1x USB 3.2 Gen 2 / SuperSpeed USB 10 Gbps port, USB-C male connector. Backward compatible with USB 3.2 Gen 1 / USB 3.1 Gen 1 / USB 3.0 and USB 2.0. Compatible with Thunderbolt 3. Input USB type C male connector on fixed 13cm cable. USB outputs: 2x SuperSpeed USB 10 Gbps port, USB-A female connector. 1x SuperSpeed USB 10 Gbps port, USB-C female connector. 1x SuperSpeed USB 10 Gbps port for data transfer or Power Delivery charging, USB-C female connector. Supports transmission rates 10.000 / 5.000 / 480 / 12 / 1.5 Mb/s (SuperSpeed+ / SuperSpeed / High / Full / Low speed). The total bandwidth / transmission rate of the box is determined by the USB 3.2 Gen 2 interface used (theoretically up to 10 Gbit/s). USB-C hub can handle connection of several external drives simultaneously. Powerful mobile device charging in the USB-C ports by current up to 3A. HDMI output: HDMI. HDMI A (F) female connector. Maximum supported resolution 4K / 4096 x 2160 at 30 Hz. DisplayPort Alternate Mode (DP Alt Mode) enabled USB-C port or Thunderbolt 3 port is necessary for the proper function of video output. Correct OS is also necessary. The video output function will not be available without these requirements. HPD (Hot-Plug-Detect) support. TMDS (Transition Minimized Differential Signaling) support. HDCP 1.4 and 2.3 (High-bandwidth Digital Content Protection) support. Up to 8-channel LPCM audio, compressed audio (AC-3, DTC) and HBR audio format support. Sample rate up to 192 kHz and 24 bit audio support depends on source and target device i.e. notebook/phone and TV/display/AV receiver. Power Delivery: Power Delivery 3.0 support device power supply from the PD wall charger via USB-C hub. Maximum power supply power via PD USB-C hub output 60W - 20V/3A. Notebook or phone with Power Delivery charging support from the USB-C port and a suitable PD charger is necessary. Other features: Possibility to connect your device while running thanks to the Hot Plug support. Full Plug and Play support. Standby mode support. Power via USB bus - USB bus power or from PD wall charger. Heavy-duty aluminium body for better hub cooling. Higher surface hub temperature is not a problem - the heat generated by the hub operation is better dissipated and transferred to the surroundings. Blue LED indicates computer USB port connection (steady light) or connection to Power Delivery charger (brighter light) High quality shielded cable ensures fast communication speed and minimal unwanted interference. Dimensions 105 x 40 x 12 mm. Weight 60 g (incl. cable). USB cable length 13 cm. Supported operating systems: Microsoft Windows 10, Mac OS, Linux, Android and Chrome OS.Compatibility depends on used OS and support from device manufacturer. Note 1: Drivers are included with supported operating systems and are installed automatically. No other drivers need to be installed. Note 2: DisplayPort Alternate Mode (DP Alt Mode) is only supported in updated OS and also depends on support from device (notebook, phone) manufacturer. Package contains: USB-C hub with fixed 13 cm long cable, printed installation guide in CZ / DE / DK / ENG / ESP / FIN / FR / GR / HR / HU / IT / NL / PL / PT / RO / RU / SK / SWE / BG / CN / TR / ARA, packed in a cardboard box.
PanzerGlass privaatsusfilter - parim kaitse võõraste pilkude eest!PanzerGlass privaatsusfilter ekraanile koos esikaamera kattega Lenovo 14" ekraanile vastab sinu kõigile
The Aero Mini USB fan will cool you down nicely with its refreshing breeze. Thanks to its flexible neck, you can position it at any angle and in any direction you want – and you won’t be disturbed thanks to its rubberised rotor blades for quiet operation. And with its USB-A connector, you can connect the USB fan to any USB-A port – whether on your PC, laptop, power bank or USB-A mains adapter. It’s the perfect way to cool down when on the move. USB fan Flexible neck Compact design Quiet operation USB powered Rubberised finish PC, laptop and power bank compatible Connection: USB-A Height: 165 mm Rotor blade diameter: 90 mm Weight: 25 g
Juhtmevabad kõrvaklapid mänguritele; Rikkalik stereoheli & varrega mikrofon; Pehmed kõrvapadjad & mitmevärviline LED valgustus; Ühildub nii arvuti, nutiseadmete kui konsoolidega; Aku kestab kuni 10 tundi järjest
