Alumiiniumist stabiilne valgustijalg• minimaalne kõrgus: 131 cm• maksimaalne kõrgus: 392 cm• pikkus kokkupandult: 113 cm• jalgade ulatuse diameeter: 109 cm• maksimaalne koormus: 9 kg (maksimaalse pikkuse korral 2 kg, 6-kraadise kalde korral 900 g)• kinnitus: 5/8" isane• kaal: 2,7 kg
If you’re shooting with a heavier DSLR and lens combination or just aiming to get the most stability for video shoots, our Fat Gecko Triple Mount is just the ticket. Three industrial locking suction cups adjust to the contour of your shooting surface, then tighten and lock into place to create our most stable mount yet. With six adjustable points, it’s easy to set up a customized angle that gets you a unique (and otherwise unattainable) shot for every shooting situation. The standard ¼-20” tripod head creates a reliable connection with your camera and includes a rubber washer with a tightening knob to dampen vibration even further in wind or from moving shooting surfaces.
Manfrotto statiiv 1052BAC on mugava QSS (Quick Stand System) süsteemiga alumiiniumstatiiv. Õhkvedrustusega, mis kaitseb statiivile paigaldatud fotoseadmeid. Maksimaalne kõrgus kuni 2,3m.
See kerge 290 seeria statiiv koos Befree Live videopeaga on ideaalne komplekt vlogijale ja sageli liikvel olevale videograafile. See ühendab endas suurepärase kasutusmugavuse ning uuendusliku disaini ega unusta komplekti lisamast usaldusväärset vastupidavust. Befree Live videopea pakub sujuvat käsitsemist ning mitmekülgseid võttenurki tänu kallutatavale disainile.Komplekti kasutajasõbralik disain hõlmab endas vastupidavaid alumiiniumist statiivijalgu, mida disainides on silmas peetud maksimaalset vastupidavust, et saaksid videosid salvestades olulisele keskenduda. Alumiiniumist lukustussüsteem võimaldab jalgu veelgi tihedamalt lukustada, kindlustades, et statiiv teenib Sind ka aastate pärast. Jalgade kaldenurka muutes on võimalik saavutada just selliseid kaadreid nagu kujutled ning vesilood tagab, et horisont on alati sirge. Lisaks pakuvad mugavad kummikatted jalgade ümber eriti mugavat käsitsemist.Komplektis sisalduv videopea on Manfrotto tootevalikus väikseim ja kergeim. See on ideaalne väiksemate videokaamerate, peegelkaamerate või hübriidkaameratega töötamiseks ning pakub eriti sujuvat käsitsemist. Videopea üksi kaalub kõigest 380 grammi, kuid suudab seejuures siiski kanda kuni 4-kilogrammist raskust.
Action Oriented: Features integrated pin-joint mount and long GoPro style thumb screw to mount action cameras like the GoPro Session, GoPro Hero 5 and small format 360 cameras
Multi-function mini-tripod. The little 3T series tripods are true all-rounders. They are small in size but big in versatility. Additional features include a 3T-35 ball had in matching colours. It will allow you to get your camera in place quickly and securely. The small tripod is extremely light and will accomplish any task. Whether as a hand-hold for action cams or as a table-top tripod with a system camera - it performs well in any situation.
Multi-function mini-tripod. The little 3T series tripods are true all-rounders. They are small in size but big in versatility. Additional features include a 3T-35 ball had in matching colours. It will allow you to get your camera in place quickly and securely. The small tripod is extremely light and will accomplish any task. Whether as a hand-hold for action cams or as a table-top tripod with a system camera - it performs well in any situation.
The AirHed 360 is our flagship ball head. One of the most functional and versatile tripod heads in the world, featuring base pan, detachable, panoramic clamp, security sockets and spirit level, plus a beautifully fluid ball with powerful locking. Panoramic Clamp - At times when the user is unable to level the tripod, this useful clamp enables level panning, whatever the tripod angle.
Suction cup for flat non-porous surfaces Ball-joint socket to move the 360o camera in different positions Dual-sided design 5/8” adapter spigot included Extremely sturdy retaining mechanism with safety pin Supports up to 2kg
Ideal for video filming. Two-way fluid head offers horizontal pan and vertical tilt action with the control handle. Usable with all video camera models and in all shooting conditions in horizontal mode. Smooth panning and tilting action while stopper screws are unlocked. Once the position is fixed, just release handle and lock stoppers with a soft touch. This will be enough to stop and move for panning and tilting. Velbon´s fluid heads comes with traditional aluminium tripods. Tripod carrying case is included. Max loading weight: 3kg 2-way panorama head PH-368 and geared elevator Quick release plate: QB-6RL
SMALLRIG 1693 Lock HDMI Protector. A universal HDMI clamp for various camera cages. It protects your wireless HDMI transmitter connections from being bumped or broken. The HDMI clamp could be adjusted and fitted for different HDMI cable. It attaches to a cage securely using a 1/4´´-20 screw. Includes:1x HDMI Lock
Alan is the perfect blend of size, weight and capability. Built for versatility, adaptability, and resilience, Alan is a powerful additional to any professional photographer or filmmaker´s toolbox. With a stored height of just 450 mm, Alan is compact enough to be stored in hand-luggage. Formed from eight layers of 100% pure pre-preg carbon fibre, and aircraft grade alloys, Alan is as robust as he is light. With standard threads at both ends, Alan is highly versatile and can also be used as a camera or microphone boom. Max Height 1.49 m. Max Height with Docz2 1.53 m. Min Height 450 mm. Min Height with Docz2 505 mm. Folded Length with Docz2 505 mm. 5 Section Leg. Load Capacity - 60 kg. Monopod Weight 0.6 kg. Monopod Weight with Docz2 1.1 kg. Max Leg Tube Diameter 32 mm.
Billy is our first full carbon Punk tripod from the new range. Built for everyday use, Billy is our lightest tripod in the current line up, but built to withstand every day punishment. Take it to the bridge or anywhere else, for that matter. At just 1.38 kg, Billy is the easiest tripod to transport in our range. A tale of two heights. Topping out at 1.645 m, Billy is a tripod with a serious working height, that still extends to 1.37 m without the column installed, giving you a stable, workable solution in even the most difficult conditions. Billy, like our other Punks tripods, has one or two tricks up his sleeve. A full height detachable monopod is a sought after feature for most, but the real coup d´état is a minimum working height of just 10 cm. Billy´s legs counterfold around the column and head, enabling the user to get him down to just 46 cm. Billy, like all 3 Legged Thing tripods, comes with a detachable monopod leg that can also be used as a microphone or camera boom. Billy is capable of supporting loads up to 13 times his weight. With an 18kg payload, Billy is one of the strongest tripods in this class. Max Height 1.645 m. Max Height w/o column 1.37 m. Min Height 100 mm. Monopod Max Height 1.71 m. Folded Length 460 mm. 4 Section Legs / 1 Section Column. Load Capacity - 18 kg. Tripod Weight 1.38kg. Leg Angles 23º, 55º, 80º. Max Leg Tube Diameter 23 mm.
Brian is a true travel tripod. Designed to be both compact and lightweight, but stable enough for full-size cameras and long lenses, Brian is versatile, durable, and strong – offering photographers a wo rld of possibilities. Brian is incredibly versatile with a minimum height of just 11 cm and stretching up to 187 cm at full extension. Formed from eight layers of 100% pure pre-preg carbon fibre, Brian is available in two colourways, and has precision-engineered mechanisms to ensure ease of use in any situation. Brian features a detachable monopod leg which extends to a massive 192 cm at full height. Not only can it function as a monopod, but it can also be used as a camera or microphone boom, or even a selfie stick! Brian, like all 3 Legged Thing tripods, comes with an easily detachable monopod leg that can also be used as a microphone or camera boom. Max Height 1.87 m. Max Height w/o column 1.46 m. Min Height 190 mm. Monopod Max Height 1.92 m. Folded Length 410 mm. 5 Section Legs / 2 Section Column. Load Capacity - 14 kg. Tripod Weight 1.45kg. Leg Angles 23º, 55º, 80º. Max Leg Tube Diameter 23 mm.
Corey is our entry level micro-traveler system. Featuring many of the same technologies that are found on our professional ranges, but made of durable, aircraft grade Magnesium Alloy, Corey is the perfect travel option for photographers who need their tripod to be as compact as possible. Max Height 1.5 m. Min Height 185 mm. Monopod Max Height 1.5 m. Folded Length 350 mm. Load Capacity - 14 kg. Tripod Weight 1.5kg. Built for punishing. Corey is a solid tripod, with powder-coated furniture for durability, and precision engineered mechanisms for smooth, easy use. One of a kind. Most entry-level tripods lack the features of their professional counterparts, but with Corey you get many of the features of our pro range, including the patented Tri-mount plate, detachable monopod leg and interchangeable footwear for use on any terrain. Pushing the boundaries of design. Corey is packed with small details that really define the brand. Our approach to design aesthetics is a long way left field of our competitors, and it is our unique styling that separates us from the mundane.
SmallRig HDMI Cable Clamp 2259 is designed to work with Nikon Z6/Z7 L-Bracket APL2258. It mounts to the top left corner of the L-Bracket by a 1/4’’-20 screw and can quickly fix the HDMI cable by a knob screw. It is compatible with HDMI cables of various sizes, offering great protection to the HDMI cable and port. Compatibility: SmallRig L-Bracket for Sony A7III A7RIII 2122 SmallRig Half Cage with Arca L-Bracket for Sony A7III A7RIII 2236 SmallRig L-Bracket for Nikon Z6 Z7 2258
SIRUI´s exclusive locking mechanism for guaranteed precision and safety. Separate control knobs for panning and locking. The friction knob is conveniently located on the main locking knob. Bubble level for fast horizontal leveling.
Sirui MP-20 sobitub kõikide kolmjalgadega (aga ka üksjalgadega), millel on 1/4 või 3/8 tolline keere. Luku ohutussüsteem ennetab kiirkinnitusplaadi juhusliku libisemise eest ning kolm loodi võimaldavad seadistamisel eriti täpset kohandamist.
Extension Arm Including gripping head D200 For scrims and flags or small lights Technical specifications: Arm length: 102 cm Tube diameter: 16 mm Material: Steel and aluminium alloy Weight: 1.1 kg Colour: Silver
Docz2 provides extra stability to monopods, and can also be used as a mini tripod by mounting a camera directly on to its 1/4“-20 screw mount. With a 1/4“-20 screw mount, and 3/8“-16 adapter supplied, Docz2 can be used with a huge variety of monopods and tripods with detachable monopod legs. Docz2 is made from strong alloys with a robust ABS covering and grippy rubber feet; suitable for use on a wide variety of terrains. With legs that fold upwards for transportation, Docz2 is an alternative to mini tripods - small enough to fit into the corner of a camera bag, yet strong enough to support cameras up to 20 kg. Height Open 8.5 cm. Folded Length 16.5 cm. Max Diameter (open) 29.5 cm. Load Capability - 20 kg. Weight 531 g.
Ellie has 9 separate possible configurations, with infinite scope for individual set ups. With two-axis adjustments, Ellie fits more cameras than any other universal L-Bracket, with an unprecedented level of functionality. Ellie´s detachable release plate can be used in isolation, or with the vertical aspect. Dual Arca-Swiss profile sides and symmetrical 1/4"-20 threaded ends enable the vertical axis to be configured in 8 positions, enabling more cable access than ever before. Ellie´s unique vertical aspect has dual-Arca Swiss profiled edges, and symmetrical ends with twin 1/4"-20 threads, enabling 8 possible side configurations. This gives Ellie unprecedented compatibility and functionality.
The QR11 is a new evolution of universal L bracket. Designed to fit most cameras* and to enable a seamless, effortless workflow between portrait and landscape. The QR11 defies convention with it´s two colour options, and additional functionality. Available in standard size for most modern DSLRs and CSC cameras, and full-size for larger DLSRs and cameras with battery grips. With strap connectors at both the horizontal and vertical aspects, the QR11 has a variety of options for wrist, neck and sling strap compatibility. The QR11´s design enables users to disassemble, with the supplied 3LT Toolz, into two flat sections, for easier stowage in tight spaces. An additional tapped 1/4" thread in the vertical aspect enables connectivity with universal devices, like magic arms, cold and hotshoe adapters, microphones, lights and basically anything with a male 1/4" thread.
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ... Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
Zelda is 3LT’s first dedicated L-Bracket. Designed, in cooperation with Nikon, to perfectly fit the shapely contours of the new Z 6 and Z 7 cameras, Zelda gives users full access to all ports and doors on the cameras. Super Strength. Zelda exquisite curves are hewn with precise accuracy from a single block of solid magnesium alloy, giving it a strength never previously found in anything outside Thor’s hammer. Sharp Styling. Anodised in stunning Copper or Metallic Slate Grey, Zelda features perfectly-aligned cut-outs that give users easy access to the tilting screen and lens release buttons on the Z Series cameras. Easy as FTZ... Because Zelda was designed in collaboration with Nikon, the dedicated accessories are 100% compatible. Both the FTZ and WR-R10 can be installed and removed without the need to remove the Bracket. Horizontal Aspect Length: 106 mm. Horizontal Aspect Width: 38 mm. Vertical Aspect Height: 85 mm. Vertical Aspect Width: 38 mm. Weight: 67 g. Compatibility – Standard Arca-Swiss.
1. Formfitting full Cage for Nikon Z5/Z6/Z7/Z6II/Z7II Camera 2. Multiple 1/4"-20 & ARRI 3/8"-16 Accessory Threads 3. Integrated Cold Shoe & NATO Rail 4. Locks Camera via 1/4"-20 & M2.5 Screw to Prevent Twisting 5. Built-In Flat Head Screwdriver with Allen Wrench on the Bottom 6. Fits any cage featuring Nato Rail on each side.
SmallRig 1446 Top Handle The good quality rubber handle is very good looking and the special design increases its friction during handheld shooting. It is equipped with a cold shoe on the top for attaching a microphone and other accessories. Compatibility: Universal Package Includes: 1 x Top Handle (Rubber) 1 x Hex Spanner 2 x 1/4´´Screw
SMALLRIG 2243 Cage for Nikon Z6/Z7. The cage is fixed on the camera via the bottom 1/4"-20 threaded hole and features a M2.5 threaded hole on the left side as a second lock point to prevent the camera form twisting. The one piece aluminum cage features multiple 1/4"-20, 3/8"-16 and ARRI 3/8" threaded holes for accessories attachment. Additionally, it features a cold shoe on the top for microphone mount and a nato rail on the left allows for quick release your setup. The bottom features multiple 1/4"-20 and 3/8"-16 threaded holes allows for mounting tripod plates. The cage features two M4 threaded holes which is used to mount FTZ Lens Adater Mount 2244 to protect the lens mount. Optional Arca Baseplate 2092 could be attached to the bottom for 15mm LWS system, as well as the cable clamp 1679 to protect the HDMI port.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie PD Short is specifically designed to work with Peak Design´s Capture Clip system*. It features a standard Arca Swiss compatible footing that clips securely into the Capture. It has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
Ellie is a new evolution of universal L-Bracket, bringing users increased compatibility with a wider range of cameras, and advanced functionality. L-Brackets are primarily used to switch from landscape to portrait on a tripod whilst maintaining the focal plane and horizon. Ellie Short has a shorter 70mm base plate which is designed to give access to the battery door on smaller DLSR and mirrorless cameras from Fujifilm, Olympus, and Canon. Compatible with standard Arca-Swiss clamps, Ellie features two different 2 screw mount slots in the base. This allows users to position the L-Bracket in the optimal position for their camera. The length of the bracket base can be adjusted thanks to two rigid stainless steel sliding bars which are then fixed into position by the user with the supplied tool. The rear edge of the base is sloped to better enable screen access. Ellie’s vertical aspect has an opening in one side, allowing users with L-shaped cable pins to connect accessories. This opening can be placed in one of four positions by inverting or reversing the vertical aspect.
SIRUI Videokit R-2004 + VH-10. This kit fits perfect for DSLR cameras, videocameras and Spotting scopes, when you want to follow a subject with smooth pans, controlled tilts and seamless transitions. Complete together with a bag which fits tripod and mounted VH-10. Features: Tripod R-2004 Built-in bubble level helps make horizontal adjustments easy. For speed and convenience, each leg has an automatic leg angle lock mechanism 2 leg angle positions for uneven terrain Retractable spiked feet for outdoor photography. Videohead VH-10 Panning resistance is preset for amazingly smooth 360° pans and can be locked for precise framing. The SIRUI designed fluid head tilting mechanism (+70°/-90°) lets you steplessly adjust resistance - producing a smooth, professional look with heavy or lightweight systems. A counter-balance mechanism (2 kg) moves the head to a neutral position - this helps camera balance and reduces unsteady tilt sequences, even when no resistance is set. Increasing resistance will smooth out your tilts. By combining smooth panning motion with proper tilt resistance you´ll achieve a professional look and feel in your videos. While this precision-machined, forged aircraft aluminum video head weighs only 0.9kg, it can easily handle camera systems (camera, lens, grip, lights, etc.) weighing up to 6kg! Included in the box: Tripod witt mounted video head, VP-90 Quick Release plate, soft protective case, shoulder strap, telescoping handle, tools, instruction manual, warranty card
SmallRig Universal Cable Clamp BSC2333 Key Features: 1. Fits any accessories with 1/4”-20 threads. 2. Support 2 cables of various thicknesses of diameter 2-7mm. 3. Secures cable via thumbscrew for quick installment. 4. All screws share one hex spanner. SmallRig Universal Cable Clamp BSC2333 is designed to hold cables in place and prevents cable strain when using cameras or monitors. The clamp is attached to the camera/monitor cage or any other accessories via a 1/4”-20 screw. It’s compatible with cable diameter from 2-7mm thickness and supports 2 cables of various thicknesses the same time without using tools, such as microphone cable, power cable, HDMI and SDI cable. The thumbscrew on each side features a hex spanner hole so that you can use the hex spanner to re-tighten it. All the screws share the same hex spanner included in the package.
SmallRig 3008 Professional Kit for Sony A7S III including Cage 2999, Cableclamp 3000 and Wooden Handgrip 2093. Cage 2999: In addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features seve SMALLRIG 3008 Professional Kit for Sony A7S III including Cage 2999, Cableclamp 3000 and Wooden Handgrip 2093. Cage 2999: In addition to one cold shoe mount and multiple 1/4"-20 and 3/8"-16 threaded holes, this formfitting aluminum cage features several ARRI-style mounts for preventing accessories from twisting when mounted on the cage. The cage also incorporates an anti-twist design with an M2.5 screw fixed to the strap hole in addition to the 1/4"-20 camera mounting screw so your camera can´t move around in the cage. You can attach SmallRig Top Handle 1984 or SmallRig Wooden Side Handle 2093 for hand-held shooting, and SmallRig Cable Clamp 3000 to protect the HDMI cable and port. ARRI-style mounts on the top and side are provided to attach SmallRig ARRI Locating Handle 2165 or SmallRig Ball Head Magic Arm 2115. It also comes with a built-in NATO rail on the left of the cage. Mounting holes on the front allow mounting a separately available SmallRig lens adapter 2219 or 1764. Strap holes are included to add a separately available wrist strap 2456,2398 or neck strap 2428 to your rig. Besides, a screwdriver is built into the bottom of the cage for tightening the camera screws. Cable Clamp 3000: This clamp attaches to the side of the cage using a 1/4"-20 screw and two anti-twist pins. The easy-to-grasp knurled 1/4"-20 screw adjusts a sliding block that can be tightened to accommodate HDMI cable of varying diameters. This Cable Clamp is constructed of a sturdy aluminum alloy and comes with an Allen wrench. Handgrip 2093: It is locked via two thumb screws and fits any cage featuring two 1/4"-20 threaded holes with 18mm distance on the side. The ergonomic side handle can be attached to left or right side by loosing the two scre
Zhiyun Weebill 2 Olulisimad omadused: Loodud kasutamiseks professionaalsete digitaalsete peegel- ja peeglivabade kaameratega. 1,6 tunnise laadimisega kuni 9 tundi kasutusaega. USB-C kaudu laadimine ja lisatoide ka salvestamise ajal. Puutetundlik ekraan stabilisaatori ja kaamera seadistuste juhtimiseks. Palju lisafunktsioone Transmitter AI abil. Stabiliseerib kuni 3,3 kg kaamerakomplekti. Soovituslike kaamera ja objektiivi komplektide kohta saab pidevalt uuenevat teavet Zhiyuni veebilehelt. Weebill 2 is the first gimbal to incorporate a 2.88-inch, flip-out HD touchscreen allowing for full command. The intuitive, rotatable and retractable interface allows interaction as well as parameter adjustment and footage monitoring in a few taps for uninterrupted shooting. Users can also access intelligent features including one-touch smart follow, time-lapse and gesture control via the touchscreen without having to use the ZY Play app. With Weebill 2 Zhiyun introduces an all-new Infineon chip and upgraded algorithm that will make the gimbal more stable. This combined with its upgraded motor torque and core algorithm, for enhanced stability enables the Weebill 2 to run analysis for complex interruptions to accurately detect and compensate for a broad range of handheld instability, even in extreme conditions. The gimbal has a classic easy-to-carry sling grip functionality, which allows users to seamlessly switch to underslung mode without the addition of extensions or altering the gimbal’s form. The outstanding grip function facilitates low-angle shooting and is suitable for comfortable, extended-hours operation. What´s in the box: 1x Weebill 2 stabilizer 1x Sling grip handle 1x Image Transmitter AI 1x Focus/zoom motor 1x Mastereye controller VC100 1x Quick release plate 1x Tripod 1x Backing base 1x Lens support 1x USB Type-C cable 2x Canon camera control cable 1x Panasonic camera control cable 1x Sony camera control cable 1x ¼-20 Screw 1x Quick start guide 1x Carrying case
ZHIYUN Smooth Q3. The new three-axis gimbal is an enhanced gimbal with a unique new compact and lightweight design. New functionality, including enhanced lighting features and smart templates, ensures more creative shooting possibilities, while a better button layout and design simplify user experience, all at a highly competitive price. Despite being smaller and more compact it can still take a bigger payload than previous model, the Q2. The new Smooth Q3 is 20% lighter but can still take a bigger payload. The gimbal is compatible with most premium smartphones out on the market even with a bumper attached. The adjustable holder can be set to a maximum width of 90 mm. A new intuitive button layout leads to overall smoother operation. For example, by triple tapping the trigger switching between portrait and landscape modes could not be easier, while ultra-wide-angle shooting means that vast landscapes are just as easy to capture as low-angle shots. On the top of the gimbal you find a 180 °Rotatable fill light with touch button that adds an extra light to your videos. The light can be set in three different strengths. The gimbal not only provides better video recordings with a smoother and more professional look. It also adds lots of creative possibilities in filmmaking with 17 SmartMode built-in templates, speeding up creation of videos that are shot on a regular basis. With the ZY Cami Editor, users can spice up videos with customised templates adding an array of music, special effects and filters. Additional new features include gesture control, SmartFollow 3.0 Object Tracking, an instant Dolly Zoom, and MagicClone Pano which is operated by a single press trigger button to mark the target and activate smart following. With the new gimbal Zhiyun also introduces ZY Prime, a subscription where members get access to more features such as more shooting templates and ZY Remo remote control feature that lets a second device control the smartphone on the gimbal. Key specifications New compact design Better grip, single hand control Better payload Easy to fold Creative templates Extra light
ZHIYUN Smooth Q3. Driven by the fascinating art and the advanced intelligent interaction, Smooth Q3 announces a comeback of a classic, offering a smarter experience in shooting. With SMOOTH-Q3, a smartphone is all you need to make a great work of art with amazing effects. Key Features Compact sliding design 3-axis mobile stabilizer Build-in LED fill light, 3 level brightness, 180 degree horizontally rotatable One button portrait mode Live streaming enabled for all platforms via the app Fascinating effects in the companion app: Multiple "You", subject tracking, gesture control, panorama, time lapse, motion lapse, Dolly Zoom, etc.. Easy video editing in the app: amazing templates, music, special effects and filters. Key specifications New compact design Better grip, single hand control Better payload Easy to fold Creative templates Extra light (340g)
3Legged Thing Albert is the perfect versatile travel sized buddy! He can be used as a table top and low level tripod as well as a monopod thanks to his detachable legs He is the perfect companion for photographers from all walks of life, with a working range from as low as 12.1cm / 4.7" and extending to 182.1 cm/ 71.6" he can be used in almost any circumstance. With a 3 section column and 5 sections legs, Albert 2.0 is one of our more versatile tripods making him go from a landscape tripod to a low-level macro friendly tripod Bigger Than You Think… Albert 2.0 is a travel tripod system with a huge upgrade. Following in the footsteps of his predecessor Albert, Albert 2.0 is compact enough for air transport, but powerful enough to hold any camera. Not only is he capable of extending over 1.8m / 6 ft, a unique ability in the world of travel tripods, he also boasts a removable centre column, becoming an invaluable tool for macro work. Not one, not two, but three Albert 2.0’s unique modular construction, with three detachable legs, allows for a multitude of configurations including monopod, low-level and table-top tripod, enabling use for even the most niche of applications. The tallest, smallest tripod in the world A limitation of most travel tripods is height and stability, due to the number of sections required to make it compact, but Albert 2.0’s unique centre column, and 3 Legged Thing´s Parallel Locking system take this travel tripod to great heights without compromising stability Optimised for heavy loads Albert 2.0’s unique design enables load capabilities of up to 30kg / 66lbs. With weight-balanced locks to lower the centre of gravity, Albert 2.0 is the industry benchmark for travel tripod technology.
3Legged Thing Leo 2.0 gives you stability and versatility in an ultra-compact package. The professional photographer´s travel tripod. Three detachable legs make the Leo 2.0 tripod incredibly versatile. Legs can be used as booms, and with the addition of Vanz, the tripod can be converted to table-top mode. Compact and designed for travel, Leo´s impressive load to weight ratio is 20:1. Available as tripod only, or in a kit with the AirHed Pro Lever ball head, and a choice of two colourways. A Traveller’s Dream... An evolution of our Lucie Technical Award-winning tripod, Leo 2.0 is an ultra-compact, professional travel tripod system packing an unprecedented level of functionality and capability. Inspired by its predecessor, a Lucie Technical Award Winner, Leo 2.0 has been redesigned to suit every travelling professional´s needs, and transcends the divide between compact travel and professional tripod systems Not one, not two, but three Leo 2.0’s unique modular construction with three detachable legs allows for a multitude of configurations including monopod, low-level and table-top tripod, enabling use for even the most niche of applications. Designed for Mirrorless, built for Medium Format Designed as a more compact solution for photographers, Leo 2.0 exceeds all conventional expectations in strength and features, providing a perfect solution for travelling photographers with even the most complex of set ups. Punching above his weight Leo 2.0 is one of the most powerful tripods in the world today. With a load to weight ratio of 20:1, he’s a trusted workhorse for serious photographers.
The only flip lock tripod in our collection and is fantastic for beginners and perfect for everyday use. Quick and easy set up Folds to just 45.5 cm Holds up to 10kg Flip Locks Patti is the first of our tripods to use flip leg locks. Formed from rugged, hard-wearing, ABS plastic, Patti’s flip locks have a smooth action which secures the legs in position. Heavy Loads Patti has a higher maximum load capacity than is usually found in tripods of this class. Able to support up to 10 kg, that’s more than enough for most mirrorless and DSLR cameras. Upside Down Enabling photographers’ creativity, Patti includes a reversible and removable centre column, ideal for focussing on low level subjects, or shooting from an alternative perspective.
Zhiyun Crane M3 Kit contains: Zhiyun Crane M-3 / Tripod Whether you are shooting with a smartphone, action camera or a compact mirrorless - the Crane M3 is the gimbal for you. Functions like improved grip, a new quick release, bigger screen and the possibility to connect a microphone to the gimbal are just a few of the new exciting features we´ll find on the new gimbal from Zhiyun. On the back of the M3 we find a new 1.22” OLED touch screen with a new easy-to-navigate and intuitive design. Through the screen you can control all the gimbal´s important functions such as operating mode, engine power etc. With gimbal you can also change the camera´s settings by connecting it either with a cord or via Bluetooth. Below the screen is a joystick that can either help you navigate the menus or smoothly control one of the gimbal´s three axes. At the top of the gimbal, we find three powerful engines that can handle up to 90% of all mirrorless cameras on the market. The camera can easily be attached to the gimbal with a newly designed quick release plate that allows you to change battery on the camera without rebalancing. Another exciting feature is a new built-in 800-lumen LED on the top side of the gimbal, colour temperature levels can be set between 3000-5400K. The LED also has the ability connect magnetic light filters that comes in four different colors. With the new Crane M3 comes the TransMount Expansion Base. A module (optional, included in Crane M3 pro package) that allows professional microphones to be directly connected to the gimbal instead of adding extra weight to the camera. Battery life is 8 hours and charging time only 2 hours. The gimbal can easily be powered via a powerbank and supports fast 25W PD charging. The M3 features innovative locks and latches for storage. Gimbal can be adjusted to half-storage/full-storage mode. No axis arm adjustments are required when switching to half-storage mode with a mounted camera, and no rebalances needed when expanded.