Full cover water block for ASUS GeForce RTX 3080 ROG Strix and ASUS GeForce RTX 3090 ROG Strix graphics cards. Manufactured from a massive block of copper, the base of the water block covers all relevant heat sources. In the GPU area, a jet plate made from stainless steel assures maximum cooling performance, while wide coolant channels in other areas guarantee minimum flow resistance. The top is manufactured from acrylic glass, reinforced by a black anodized aluminum frame. Thirteen individually addressable RGBpx LEDs are integrated into the water block and can be connected to an Aqua Computer device with RGBpx output or to a motherboard with a compatible output. The kryographics NEXT series retains established features of the kryographics series: Mirror finish for relevant contact areas. Direct contact to GPU and RAM, high quality thermal pad included for further components such as voltage regulators. All mounting threads are equipped with metal spacers for easy installation. Inlet and outlets ports with G1/4 thread, can be used from both sides. Two sealing screws included. Interchangeable connection terminal. Full compatibility to kryographics connection terminals with VISION module and kryoconnect SLI connectors. Compatible products for integrated RGBpx illumination: All Aqua Computer products with RGBpx output Various motherboards with connector for addressable RGB LEDs Materials: Base part: Copper Top cover: Acrylic glass Frame: Aluminum, anodized Jet plate: Stainless steel Terminal: Acetal Scope of delivery: Water block without hose connectors (threads G1/4) Two G1/4 sealing screws Thermal compound Thermal Grizzly Kryonaut, approx. 0.5 grams in syringe Plastic spatula Thermally conductive pad Mounting material RGBpx connection cable 50 cm RGBpx adapter Compatibility: Please check compatibility using the PDF from Aqua Computer under Awards and Documents. Please note: Graphics card and fittings are not included in delivery, please order separately. When using the ASUS ROG Crosshair VIII Formula motherboard, the RGBpx ports cannot be used due to the installed decorative panel.
Full-Block-Wasserkühler von EK Water Blocks, für RTX 3080 und 3090-Grafikkarten im Referenz-Design, schwarzer Acetal-Deckel, Kühlkörper aus vernickeltem Kupfer, integrierte und adressierbare RGB-LED-Beleuchtung
EK-Quantum Vector RTX 3080/3090 Backplate - Nickel is a CNC-milled backplate made of black anodised aluminium that fits all EK-Quantum Vector RTX 3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector RTX 3080/3090 back plate - nickel Assembly mechanism Thermal pads
EK-Quantum Vector RTX 3080/3090 Backplate - Black is a CNC-milled backplate made of black anodised aluminium that fits all EK-Quantum Vector RTX 3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector RTX 3080/3090 rear panel - Black Assembly mechanism Thermal pads
Full-Block-Wasserkühler von EK Water Blocks, für RTX 3080 und 3090-Grafikkarten im Referenz-Design, schwarzer Acetal-Deckel, Kühlkörper aus hochreinem Kupfer
The EK-Quantum Vector XC3 RTX 3080/3090 D-RGB GPU cooler, has been further developed based on the 2nd generation Vector series and designed for the EVGA XC3 RTX 3080 and 3090 graphics cards. The Vector water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acetal. Furthermore, the cooler has D-RGB lighting, with a total of 12 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 275 x 124 x 20.5mm (L x H x W) Material: Nickel-Plated Copper, Acetal Threads: G1/4" D-RGB cable length: 500mm D-RGB LED count: 12 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Scope of Delivery: EK-Quantum Vector XC3 RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EVGA GeForce RTX 3080 XC3 Black Gaming (10G-P5-3881-KR) EVGA GeForce RTX 3080 XC3 Gaming (10G-P5-3883-KR) EVGA GeForce RTX 3080 XC3 Ultra Gaming (10G-P5-3885-KR) EVGA GeForce RTX 3080 XC3 Ultra Hybrid Gaming (10G-P5-3888-KR) EVGA GeForce RTX 3080 XC3 Ultra Hydro Copper Gaming (10G-P5-3889-KR) EVGA GeForce RTX 3090 XC3 Black Gaming (24G-P5-3971-KR) EVGA GeForce RTX 3090 XC3 Gaming (24G-P5-3973-KR) EVGA Geforce RTX 3090 XC3 Ultra Gaming (24G-P5-3975-KR) EVGA GeForce RTX 3090 XC3 Ultra Hybrid Gaming (24G-P5-3978-KR) EVGA GeForce RTX 3090 XC3 Ultra Hydro Copper Gaming (24G-P5-3979-KR)
EK-Quantum Vector Strix RTX 3080/3090 Backplate - Nickel is a CNC-milled backplate made of nickel-plated aluminium that fits all EK-Quantum Vector Strix RTX 3070/3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector Strix RTX 3070/3080/3090 back plate - nickel Assembly mechanism Thermal pads
Arvuti tüüp: Mängud ja multimeedia; Korpuse materjal: Metall; Aku tüüp: Pole infot; Värv: Sinine; Kaal: 2,38 kg; Mõõtmed (laius x kõrgus x sügavus): 35,8 x 2,34 x 26,7 cm; Seeria nimi: MSI GE Raider; Mudeli nimi: GE6610UH-013NL; Ekraani tüüp: Matt...
Arvuti tüüp: Mängud ja multimeedia; Korpuse materjal: Plast; Aku tüüp: Li-ion 4 cell; Värv: Titanium Blue; Kaal: 2.9 kg; Mõõtmed (laius x kõrgus x sügavus): 39.7 x 2.59 x 28.4 cm; Seeria nimi: MSI GE Raider; Mudeli nimi: GE76 10UH-202NL; Ekraani...
The Alphacool Aurora Plexi GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Plexi GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Plexi is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Note: - This article is delivered with a backplate - The Founders Edition, does NOT correspond to the Reference Design! Technical data: L x W x B: 224,9 x 121,4 x 25,5 mm Material cooler: Nickle plated copper Material top: Plexi Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Power connector Digital RGB: 3-Pin 5V (0,5A) Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards (Note: RTX 3090/3080 cards will be added after their release) Compatibility list: ATTENTION: The following models were visually checked for compatibility. Please note that this list may change at short notice. More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! RTX 3080 Zotac GAMING GeForce RTX 3080 Trinity (ZT-A30800D-10P) Zotac Gaming GeForce RTX 3080 Trinity OC (ZT-A30800J-10P) PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXMPB) PNY GeForce RTX 3080 XLR8 Gaming EPIC-X RGB 10240 MB GDDR6X (VCG308010TFXPPB) Inno3D GeForce RTX 3080 iChill X4 10240 MB GDDR6X (C30804-106XX-1810VA36) Inno3D GeForce RTX 3080 Twin X2 OC 10240 MB GDDR6X (N30802-106XX-1810VA34) Inno3D GeForce RTX 3080 iChill X3 10240 MB GDDR6X (C30803-106XX-1810VA37) Palit GeForce RTX™ 3080 GamingPro (NED30800191A-132AA) Palit GeForce RTX™ 3080 GamingPro OC (NED3080S191A-132AA) Galax GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI (38NWM3MD99NN) KFA2 GeForce RTX 3080 SG 10GB GDDR6X 320-bit DP*3/HDMI (38NWM3MD99NK) Gainward RTX 3080 Phoenix Gainward RTX 3080 Phoenix GS Galakuro NVIDIA GEFORCE RTX 3080 GG-RTX3080-E10GB/TP RTX 3090 PNY GeForce RTX 3090 XLR8 Gaming EPIC-X RGB, 24576 MB GDDR6X (VCG309024TFXPPB) Inno3D GeForce RTX 3090 iChill X3, 24576 MB GDDR6X (C30903-246XX-1880VA37) Inno3D GeForce RTX 3090 Gaming X3, 24576 MB GDDR6X (N30903-246X-1880VA37N) Inno3D GeForce RTX 3090 iChill X4, 24576 MB GDDR6X (C30904-246XX-1880VA36) Zotac GeForce RTX 3090 Trinity, 24576 MB GDDR6X (ZT-A30900D-10P) Palit GeForce RTX™ 3080 GamingPro (NED3090019SB-132BA) Palit GeForce RTX™ 3080 GamingPro OC (NED3090S19SB-132BA) Galax GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI/ (39NSM5MD1GNA) KFA2 GeForce RTX 3090 SG 24GB GDDR6X 320-bit DP*3/HDMI/ Gainward RTX 3090 Phoenix Gainward RTX 3090 Phoenix GS Galakuro NVIDIA GEFORCE RTX 3090 GG-RTX3090-E24GB/TP Download manual PDF: Alphacool Eisblock Aurora Plexi GPX-N RTX 3090/3080 Download data sheet PDF: Alphacool Eisblock Aurora Plexi GPX-N RTX 3090/3080
EK-Quantum Vector Strix RTX 3080/3090 Backplate - Black is a CNC-milled backplate made of black anodised aluminium that fits all EK-Quantum Vector Strix RTX 3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector Strix RTX 3070/3080/3090 back plate - Black Assembly mechanism Thermal pads
Arvuti tüüp: Mängud ja multimeedia; Korpuse materjal: Metall (alumiinium); Aku tüüp: Li-ion; Värv: Must; Kaal: 2 kg; Mõõtmed (laius x kõrgus x sügavus): 35,83 x 1,98 x 24,8 cm; Seeria nimi: MSI GS Stealth; Mudeli nimi: GS6610UH-054NL; Ekraani tüüp:...
The EK-Quantum Vector Strix RTX 3080/3090 D-RGB water block is compatible with the ROG Strix RTX 3080 and 3090 graphics cards. The Vector water block actively cools the GPU, the VRAM (on the front), the MOSFETs in the VRM (voltage regulation module), the PWM controller and all chokes including the input rail. The water block contacts each individual inductor to suppress any possible whimpering of the coil. EK water block for Vector ROG Strix 3080/3090 Acetal These newly developed water blocks have optimised flow paths that reduce hydrodynamic instabilities and turbulence (dead spots) in their interior. In addition, this new design allows the copper cold plate to expand almost the entire length of the PCB, which also cools less critical components for maximum efficiency. The EK-Quantum Vector series water blocks use an open split-flow cooling motor design that has proven to be the superior solution for GPU water blocks. It features low hydraulic flow restriction, which means it can be used with weaker water pumps or with pumps running at low speeds and still achieve peak performance. The geometry of the nozzle plate and fin structure has been optimised to ensure even flow distribution with minimum losses and optimum performance in any orientation of the coolant flow. The Fin Array is equipped with 28 micro fins with 0.6 mm wide micro-channels that provide optimum cooling performance without unnecessary flow restrictions or risk of clogging. The base of the block is CNC-machined from nickel-plated electrolytic copper, while the top is CNC-machined from durable black POM acetal. These 2nd generation Vector GPU water blocks also have acetal connections to match the top cover. The watertight seal is ensured by high quality EPDM O-rings, while brass spacers are pre-installed for a safe and easy installation process. D-RGB lighting on EK-Quantum Vector Strix RTX 3080/3090 D-RGB water block The aesthetic corner end piece accommodates the addressable D-RGB LEDs. This water block has a total of 6 individually addressable RGB LEDs and is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector must be aligned with the +5V marking on the D-RGB (addressable) pin header. Back plate for the water block ROG Strix 3080/3090 EK recommends the purchase of a retention backplate that improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, VRAM on the 3090 cards and the back of the VRM area of the board. Enclosed: EK-Quantum Vector Strix RTX 3080/3090 D-RGB series high performance water block Mounting mechanism with screw-in brass spacers Required fixing screws, nuts and washers 2x nickel-plated brass plugs G1/4 EK-loop multiple Allen spanner (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Technical specification: Dimensions: (LxHxW) - 293x154x16,5mm D-RGB cable length: 500 mm Number of D-RGB LEDs: 12 D-RGB connector standard 3-pole (+5V, data, blocked, ground)
The EK-Quantum Vector TUF RTX 3080/3090 backplate is designed for the EK-Quantum Vector TUF RTX 3080/3090 graphics card cooler of the same name. A backplate is particularly suitable for giving the graphics card more stability. Since the backplate is kept very simple, it is rounded off by a small but elegant EK logo. Technical Data Material: Nickel-Plated Aluminium Color: Nickel Scope of Delivery EK-Quantum Vector TUF RTX 3080/3090 Backplate - Nickel Mounting mechanism (the backplate screws are on the other side - separate compartment) Thermal pads
The EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Nickel Backplate is made of aluminum. This ensures improved cooling. Technical specifications: Material: aluminum Silver Weight: Dimensions: 307.62 x 128 x 5.2mm Scope of delivery: EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Nickel
The EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Black Backplate is made of aluminum. This ensures improved cooling. Technical specifications: Material: aluminum Color: Black Weight: Dimensions: 307.62 x 128 x 5.2mm Scope of delivery: EK Water Blocks EK-Quantum Vector Trio RTX 3080/3090 Backplate - Black
The EK-Quantum Vector RE RTX 3080/3090 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RTX 3080/3090 graphics cards. The Vector RE water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The copper base is much thicker than previous Vector models. The top is made almost entirely of acrylic. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate (e.g. item 1020619). Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 220 x 124 x 20.5mm (L x H x W) Material: Copper, Acryl Threads: G1/4" Scope of Delivery: EK-Quantum Vector RE RTX 3080/3090 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EMTEK GeForce RTX 3080 10GB Black Edition OC Gainward GeForce RTX 3080 Phoenix Gainward GeForce RTX 3080 Phoenix GS Gainward GeForce RTX 3090 Phoenix Gainward GeForce RTX 3090 Phoenix GS GALAX GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NN) GALAX GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNA) KFA2 GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NK) KFA2 GeForce RTX 3080 SG 10GB (38NWM3MD99NK) KFA2 GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNK) KUROUTOSHIKOU GeForce RTX 3090 24GB GALAKURO (GG-RTX3090-E24GB/TP) Palit GeForce RTX 3080 GamingPro (NED3080019IA-132AA) Palit GeForce RTX 3080 GamingPro OC (NED3080S19IA-132AA) Palit GeForce RTX 3090 GamingPro (NED3090019SB-132BA) Palit GeForce RTX 3090 GamingPro OC (NED3090S19SB-132BA) PNY GeForce RTX 3080 10GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG308010TFXPPB) PNY GeForce RTX 3090 24GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG309024TFXPPB) PNY GeForce RTX 3090 OC XLR8 Gaming Epic-X RGB Triple Fan Edition, 24GB GDDR6X, HDMI, 3x DP (VCG309024TFXMPB)
The EK-Quantum Vector RE RTX 3080/3090 GPU cooler, has been further developed based on the 2nd generation Vector series and is compatible with most reference designs of RTX 3080/3090 graphics cards. The Vector RE water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The nickel-plated copper base is much thicker than previous Vector models. The top is made entirely of black durable POM acetal, which also includes the connection terminal. The end piece of the cooler has D-RGB lighting, with a total of 5 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB Sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. As the GPU cooler does not have a backplate, it is recommended to order a matching backplate (e.g. item 1020619). Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: (LxHxW) - 220x124x20.5mm Material: Nickel-Plated Copper, Acetal Threads: G1/4" D-RGB cable length: 500mm D-RGB LED count: 5 D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) Scope of Delivery: EK-Quantum Vector RTX RE 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EMTEK GeForce RTX 3080 10GB Black Edition OC Gainward GeForce RTX 3080 Phoenix Gainward GeForce RTX 3080 Phoenix GS Gainward GeForce RTX 3090 Phoenix Gainward GeForce RTX 3090 Phoenix GS GALAX GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NN) GALAX GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNA) KFA2 GeForce RTX 3080 SG (1-Click OC) (38NWM3MD99NK) KFA2 GeForce RTX 3080 SG 10GB (38NWM3MD99NK) KFA2 GeForce RTX 3090 SG (1-Click OC) (39NSM5MD1GNK) KUROUTOSHIKOU GeForce RTX 3090 24GB GALAKURO (GG-RTX3090-E24GB/TP) Palit GeForce RTX 3080 GamingPro (NED3080019IA-132AA) Palit GeForce RTX 3080 GamingPro OC (NED3080S19IA-132AA) Palit GeForce RTX 3090 GamingPro (NED3090019SB-132BA) Palit GeForce RTX 3090 GamingPro OC (NED3090S19SB-132BA) PNY GeForce RTX 3080 10GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG308010TFXPPB) PNY GeForce RTX 3090 24GB XLR8 Gaming EPIC-X RGB Triple Fan Edition (VCG309024TFXPPB) PNY GeForce RTX 3090 OC XLR8 Gaming Epic-X RGB Triple Fan Edition, 24GB GDDR6X, HDMI, 3x DP (VCG309024TFXMPB)
The GPU cooler for the NVIDIA RTX 3080/3090 MSI VENTUS AURORA, is a powerful complete graphics card cooler. Thanks to the nickel-plated copper base plate and its special design, the cooler offers maximum cooling performance. The high-quality acrylic glass lid is ultra-clear and thus ensures a noble appearance. In addition, the item has 5V RGB lighting, which is compatible with Aura Sync, MSI Mystic, Gigabyte RGB, Asrock LED and Barrow LRC controllers. Technical Data: Lighting: LRC 2.0 RGB Water Channels: 43 Channels at 0.5mm thickness (at 0.3mm width) Material: Nickel Plated Copper + Acrylic Top Graphics card compatibility: MSI RTX 3090 VENTUS 3X 24G MSI RTX 3090 VENTUS 3X 24G OC MSI RTX 3080 VENTUS 3X 10G MSI RTX 3080 VENTUS 3X 10G OC
The EK-Quantum Vector Trio RTX 3080/3090 D-RGB GPU cooler, has been further developed based on the 2nd generation Vector series and designed for the MSI Trio and Suprim RTX 3080 and 3090 graphics cards. The Vector water block directly cools the GPU, the VRAM and the VRM (voltage regulation module), as the cooling liquid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acetal. Furthermore, the cooler has D-RGB lighting, with a total of 9 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 320 x 157 x 20.5mm (L x H x W) Material: Nickel-Plated Copper, Acetal Threads: G1/4" Scope of Delivery: EK-Quantum Vector Trio RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility MSI GeForce RTX 3080 Gaming Trio 10G MSI GeForce RTX 3080 Gaming X Trio 10G MSI GeForce RTX 3080 Suprim 10G MSI GeForce RTX 3080 Suprim X 10G MSI GeForce RTX 3090 Gaming Trio 24G MSI GeForce RTX 3090 Gaming X Trio 24G MSI GeForce RTX 3090 Suprim 24G MSI GeForce RTX 3090 Suprim X 24G
The EK-Quantum Vector FTW3 RTX 3080/3090 D-RGB GPU cooler, has been further developed based on the 2nd generation Vector series and designed for the EVGA FTW3 RTX 3080 and 3090 graphics cards. The Vector water block directly cools the GPU, VRAM and VRM (voltage regulation module), as the cooling fluid is routed directly over these critical areas. The base of the block is made of nickel-plated copper, while the top is made of acetal. Furthermore, the cooler has D-RGB lighting, with a total of 9 individually addressable LEDs, which makes the end piece shine pleasantly. The lighting is compatible with all common RGB sync technologies of the major motherboard manufacturers, such as ASRock Polychrome Sync, ASUS Aura Sync, Gigabyte RGB Fusion and MSI Mystic Light. Since the GPU cooler does not have a backplate, it is recommended to order a matching backplate. Such a backplate not only improves stability, but also promotes cooling performance, as it also serves as a passive cooler. Technical Data: Dimensions: 314 x 155 x 20.5mm (L x H x W) Material: Nickel-Plated Copper, Acetal Threads: G1/4" Scope of Delivery: EK-Quantum Vector FTW3 RTX 3080/3090 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g) Compatibility EVGA GeForce RTX 3080 FTW3 Gaming (10G-P5-3895-KR) EVGA GeForce RTX 3080 FTW3 Ultra Gaming (10G-P5-3897-KR) EVGA GeForce RTX 3080 FTW3 Ultra Hybrid Gaming (10G-P5-3898-KR) EVGA GeForce RTX 3080 FTW3 Ultra Hydro Copper Gaming (10G-P5-3899-KR) EVGA GeForce RTX 3090 FTW3 Gaming (24G-P5-3985-KR) EVGA GeForce RTX 3090 FTW3 Ultra Gaming (24G-P5-3987-KR) EVGA GeForce RTX 3090 FTW3 Ultra Hybrid Gaming (24G-P5-3988-KR) EVGA GeForce RTX 3090 FTW3 Ultra Hydro Copper Gaming (24G-P5-3989-KR)
The Barrow LRC2.0 full coverage GPU Water Block for MSI RTX3090 TRIO Aurora is a complete GPU cooler. It covers and cools all important components such as GPU RAM, capacitors and GPU processor. This cooler was specially developed for the Nvidia MSI RTX 3090 TRIO. The cooler plate is made of nickel-plated copper and is equipped with special micro cooling channels for optimal cooling. The lid with the integrated RGB lighting is made of acrylic glass. The RGB's are controlled via a 4Pin connector on the mainboard. Compatibility MSI RTX 3090 GAMING X TRIO 24G MSI RTX 3090 GAMING TRIO 24G MSI RTX 3080 GAMING X TRIO 10G MSI RTX 3080 GAMING TRIO 10G Technical Data Material: Nickel-Plated Copper (base), Acrylic Glass (cover) Dimensions: 285,8 x 152 x 20,4mm Colour: Silver / Transparent Cover: complete GPU cooler Illumination: integrated RGB lighting Threads: 2x G1/4" female Connections: 4Pin 5V RGB lighting Scope of Delivery Barrow LRC2.0 full coverage GPU Water Block for MSI RTX3090 TRIO