Original part number NCT-3 Product name Gembird Digital network cable tester Producer Gembird Class of product Tool/Tester Tool type Measuring instrument Additional functions data & voice pin out test Additional information Indicates wiring problems in Cat 5E, 6E, coaxial and telephone cables : open ocircuit, short circuit, jumper wire, reverse connection; Measures the cablelength and determines the distance to the open circuit; The length measurementaccuracy up to 97% via built-in calibration; Self-checks and automatically compensates any change in battery capacity or ambient temperature Up to 50 working hours of the battery life; Power consumption: up to 16 mA Display: 4 x 16 character LCD screen, 61.6 x 25.2 mm ; Designed for: STP/UTP twin twisted, coaxial & telephone cable Working ambient temperature: -10 ... + 60°C Tester port: tester RJ45 master port (M), tester LOOPBACK RJ45 port (L), far-end recognizer RJ45 port (R) Max cable length: up to 1350 m Cable problems detected: open circuit, short circuitreverse connection, crossover or cross-talk interference Automatic shut-down: after 30 minutes Width 80 mm Height 180 mm Depth 40 mm Net weight 0.25 kg Colour graphite
Quick and easy test on RJ-45 outlet for Power over Ethernet existence in a secondPLANET POE-TESTER is an easy-to-use PoE diagnostic adapter for network installers, company MIS and even home users to quickly identify the existence of Power over Ethernet on applications network. It is designed to detect if the IEEE 802.3af/at PoE voltage runs over the UTP cable and identify the type of PSE (Power Source Equipment) for troubleshooting.Plug and Show LED IndicatorsSimply connect the POE-TESTER to the PSE or the RJ-45 outlet and the LED will light up when it detects the PoE voltage via the UTP cable and identifies the PSE to be mid-span, end-span, or even the latest 4-pair 60-watt ultra PoE in a second.Identify PoE PSE ModesThe POE-TESTER provides two LEDs for quick and easy PSE mode identification. A Power over Ethernet system comprises a PSE (Power Sourcing Equipment) and a PD (Powered Device). The PSE is a device that will provide power in a PoE setup. There are two types of PSE, Mode A and Mode B. The PSE may either be a Mode A, end-span PoE switch or a Mode B, mid-span PoE injector.The PD is a PoE-enabled terminal by PSE and thus consumes energy, such as IP network cameras, VoIP phones and wireless access points and more.PoE Installation TroubleshootingAlthough PDs that implement only Mode A with end-span or Mode B with mid-span are disallowed by the IEEE 802.3af/at standard, there are still some of the PDs that are designed to work with only one of the modes. Thus, it will cause the PoE PSE and PD not to be compatible with each other in the applications. For example, an end-span designed PoE switch cannot power on the remote mid-span only wireless access point. But most of the time, the installers would not exactly know what the remote PSE devices are. PLANET POE-TESTER checks your UTP cable for power and identifies its source, mid-span or end-span. Make sure at the end of UTP cable there is existence of PoE, and then the next step is to check if the PD is compatible with the PSE, or it is a malfunctioned PD.Toetatud ühendusedRJ-45Toote värvValgeLED-indikaatoridJahKaabli tüüpCat. 5 UTP cable or aboveVõrgustandardidIEEE 802.1af,IEEE 802.3atKaal20 gMõõdud (l x s x k)23 x 70,1 x 22 mmKasutamistemperatuur (T-T)-10 - 60 °CSuhteline õhuniiskus kasutamisel (H-H)5 - 95 protsenti
Original part number FLH-26000900 Product name Fluke Networks Producer Fluke Networks Class of product Tool/Tester Tool type tester Standard accessory cable tester Additional information Angled bed-of-nails clips allow easy access to individual pairsRJ-11 connector is ideal for use on telephone jacksLoud speaker makes the tone easier to hear through drywall, wood, and othersSends loud tone up to 16 kilometers on mostcablesPro3000 Analog Toner Specifications:Dimensions: 6.9 cm x 6.1 cm x 3.6 cmUser interface- Slide switch selects Continuity or Tone Mode- Push button switch selects SOLID, ALT or OFF- Tone mode LED- Continuity/Polarity LEDSolid Frequency: 1000 Hz nominalAlternating Frequency: 1000/1500 Hz nominalOver Voltage Protection: 60 Vdc in Toner/Polarity ModeOutput Power in Tone Mode: 8 dbm into 600 ohmsOutput Voltage Level in Continuity Mode: 8 Vdc with fresh batteryPower: Battery 9V alkalineOperating temperature: -20°C do 60°CPro3000 Analog Probe SpecificationsCase dimensions: 24 cm x 4.1 cm x 3.3 cmUser interface:- ON/OFF push button- Volume dial- Replaceable tips- 3.5 mm earphone jackPower: Battery 9V alkalineOperating temperature: -20°C do 60°C Colour Black Datasheet Website
Tootja: DIGITUS Tootegrupp: tööriist/tester tööriista tüüp: Fibre-optic tools Standard tarvikud: Etui Lisaandmed: Easily checks continuity single ja multimode fibers Kuni 5 km andmeleht: http://katalog.assmann.pl/produkt/vfl650-optyczny-lokalizator-uszkodzen-dn-vfl650-2s
Original part number FLH-11230002 Product name Fluke Networks Stripping tool for data cable Producer Fluke Networks Class of product Tool/Tester Tool type Stripper
Original part number WZ0019 Product name LOGILINK - Multi cable crimping tool Producer LogiLink Class of product Tool/Tester Tool type Crimp tool for RJ11 (4P4C) plugsCrimp tool for RJ12 (6P6C) plugsCrimp tool for RJ45 (8P8C) plugs Additional information A tool for cutting, crimping and stripping cablesMetal construction ensures the tool durability and reliability Colour Blue
Original part number FL-MS2-100 Product name Fluke Networks Producer Fluke Networks Class of product Tool/Tester Tool type tester Standard accessory cable tester Additional information FeaturesRevolutionary Interface - graphical wiremap,length, cable ID, and distance to fault displayed on one screenMultimedia Support - tests all common media types including RJ11,RJ45, Coax, with no need for adaptersIntelliTone Toning - locates virtually any cable or wire pair with IntelliTone digital and analog toningVDV Service Detection - verifies todayâs media services, including 10/100/1000Ethernet, POTS, and PoERugged Housing - integrated rubber holster enhances grip and makes it durable enough for the toughest jobsEquipment:Tester MicroScanner2 with remote adapter, manual, batteries, carry pouch Width 76 mm Height 163 mm Depth 36 mm Net weight 0.363 kg Colour yellow/blue Datasheet Website
Original part number FL-VISIFAULT Product name Fluke Networks Producer Fluke Networks Class of product Tool/Tester Tool type tester Standard accessory cable tester Additional information Fiber compatibility: Multimode and SinglemodeWavelength: 650 nmConnector : Standard adapter allows to connect all optical connectorswith 2,5mm standard (eg. SC/FC/ST). Adapter FL-NF380 allows to work in 1,25mm standard (LC/MU)Laser safety rating: Class IIMax. output power: 1 mWOutput modes: Continuous (steady) and flashing (2-3Hz pulsed)Range:-3 km multimode-4 km singlemodeShock: 1m drop onto all corners and faceVibration: Random, 2g, 5-500 HzMax. operating altitude: 3000 mOperating temperature : 0°C ÷ 40°CRelative humidity : 0% ÷ 95% non-condensingPower: 2x AA batteryBattery life: > 80hours in continuous modeProtections:-CSA C22.2 No. 1010.1 1992,-EN 61010-1,-CE Width 52 mm Height 157 mm Depth 39 mm Net weight 0.18 kg Colour yellow/blue Datasheet Website
A crimping tool is a tool designed to crimp or connect a connector to the end of a cable. For example, network cables and phone cables are created using a crimping tool to connect the RJ-45 and RJ-11 connectors to the end of the cable. In the example picture below, this crimper is capable of crimping a RJ-11 (6-Pin) and RJ-45 (8-Pin) connectors and also includes a wire cutter near the handles that can be used to cut phone or CAT5 cable. To use this crimping tool, each wire is first placed into the connector. Once all the wires are in the jack, the connector with wires are placed into the crimping tool, and the handles are squeezed together. Crimping makes the plastic connector puncture and hold each of the wires, which prevents the wires from falling out and for data to be transmitted from the connector to each of the wires.
RAINBOW CONNECTIONCharge and sync your Samsung Galaxy devices quickly and safely, using just one cable. Simply plug the USB end directly into any USB port to stay connected while you're at home, at work, or on the road. CONNECT QUICKLYUse the MiXiT UP Micro-USB to USB ChargeSync Cable to charge and sync your Samsung Galaxy device. The small, durable Micro-USB connector also works with most smartphones and tablets with a Micro-USB port, including Samsung, Kindle, HTC, Nokia, LG, Nexus and Motorola. USE IT ANYWHEREThe MiXiT UP ChargeSync Cable plugs into any USB 2.0 port, so you can use it virtually anywhere. Connect to your laptop to charge and sync, use your own wall charger to charge from the wall, or plug into a car charger and charge on the road. CASE COMPATIBILITYDepending on the type of case you have, you may need to remove your case before charging. If your speakers, connector port and AUX port are fully exposed when your case is on, you should be able to easily charge and sync your device without removing the case. Feature1 usb-a-2-0-stecker Feature2 usb-b-2-0-micro-stecker Quantity 1x Form USB Micro B Construction Plug Cable Design Round Plug Design Standard Plug Colour Black Cable Length (m) 3,0
Product kirjeldus: Club 3D - USB-C kaabel - USB-C to USB - 1 m Type: USB-C kaabel Features: Reversible C connector, sync ja charge, Ultra HD (4K) tugi, 10 Gbps data rate pikkus: 1 m ühenduspesa: 24 pin USB-C - male ühenduspesa (Second End): 4 pin USB Type A - male Rated Current: 3 A Compliant Standards: USB 3.1 Gen 2
Original part number 62406 Product name Delock Adapter USB 2.0 > 1 x Serial RS-422/485 Producer Delock Class of product Others controllers/adapters Bus type USB 2.0 Internal connectors 1 x USB 2.0 External ports N/A Low-profile card No Additional information Adapter: USB 2.0 type A male to 1 x 9 pin serial RS-422/485 maleTerminal block: 1 x 9 pin serial RS-422/485 female to 6 pin terminal block
Original part number 83453 Product name Delock Cable USB 2.0 Extension, active 30 m Producer Delock Class of product Cables - USB | FireWire | PS/2 | (e)SATA | ATA Basic information Basic information USB plugs 2x USB 2.0 Cable length 30 m Other information Other information Gold plated plugs Yes Cable colour Black Net weight no data Gross weight no data Additional information ACTIVE,
Original part number 82753 Product name Delock Cable USB 3.0-A Extension male / female 2 m Premium Producer Delock Class of product Cables - USB | FireWire | PS/2 | (e)SATA | ATA Basic information Basic information USB plugs 1x male USB A-type1x female USB A-type Cable length 2 m Other information Other information Gold plated plugs Yes Cable colour Black Additional information Connector: USB 3.0-A male > USB 3.0-A femaleCompatible to USB 2.0 and USB 1.1Data transfer rate up to 5 Gb/s (Super Speed)Cable gauge: 26 AWG data line, 24 AWG power lineCopper wireCable double shieldedBend protection on junctionGold-plated connector with red metal housing