The LINDY SAS/SATA RAID Back Plane system is an internal drive housing that supports up to four 2.5"" SAS/SATA hard drives in a single 5.25"" expansion bay. It can easily be installed into a case or expansion system and is ideal for servers and workstations alike, allowing instant hot-swap access to the hard drives. To add RAID functionality, simply connect the back plane system to your computers RAID controller.As the back plane system uses 2.5"" SAS/SATA HDDs (not supplied) it consumes only a fraction of the power used by similar systems using 3.5"" HDDs and requires less cooling - so is quieter to run.Supports 4 x 2.5"" SAS and SATA II/1.0a HDDs (not included)Fits into a standard 5.25"" expansion bay RAID compatible when connected to a suitable RAID controller Supports hot swap function Technical SpecificationsFor 4 x 2.5"" SAS and SATA II/1.0a HDDs Single bay 5.25"" back plane module, with 4 x inner HDD tray 2 ventilation fans (40 x 40 x 10mm) for high performance, high speed drive cooling Fan speed is jumper selectable Hot Plug support - for extremely quick HDD changing/swapping and shortest down time Metal aluminium body with metal HDD frames LED for Power & HDD Activity Internal HDD SAS dual data channel backplane connector, SATA drive compliant External ports: 4 x SATA 7 pin primary data channel (black) 4 x SATA 7 pin secondary data channel (yellow) 1 x 5.25” internal power connector2.5” HDD frames with front doors with locking mechanism.
Ole esimene, kes toodet kommenteerib