PowerWalker PowerWalker VI 750 PSW USV

PowerWalker VI 750 PSW With its high efficient digitalized PWM-based controller PowerWalker VI 750 PSW provides a pure sine wave output for best protection for sensitive equipment. A comprehensive display allows monitoring the power status very easily. Especially best suitable to protect modern PC like mini servers, gaming PC, point of sale (POS) systems and other electronic devices with APFC power supplies. Not only limited to APFC power supplies and equipped with a voltage stabilizer, this UPS will continue providing clean and stable power to connected equip ment and is perfect for any home or small and medium office application 750VA Line-Interactive UPS with pure Sine Wave 4x IEC, RJ-11/RJ-45 Surge Protection USB Connection for monitoring LCD display for status view Built - in boost and buck AVR function Technical Details: Capacity: 750VA / 480W Input Voltage 220/230/240VAC Voltage Range 162-290VAC Output Voltage: 220/230/240VAC Voltage Regulation (Battery Mode): ± 10 % Frequency: 50 or 60Hz Freq. Regulation (Battery Mode): ± 1 Hz (Battery Mode) Waveform: Pure Sine Wave Transfer Time Typical 2-6ms Battery Type: 12V / 9Ah Quantity: 1x Recharge Time: 6h to 90% LCD Display Indicators: AC mode, Battery mode, Load level, Battery capacity, Input voltage, Output voltage, Overload alarm, Fault alarm and Low battery alarm Audio Indicators: Battery Mode: Beep every 10 sec Low Battery: Beep every second Fault: Continuous Beep Battery is faulty: Beep every 2 sec UPS overload: Beep 2 times per secon Full Protection Discharge: Yes Overcharge: Yes Overload: Yes Short circuit: Yes Type Line Interactive USV (UPS) Nominal Power (Watt) 480 Nominal Power (VA) 750 Number of Batteries 1 Max. Überbrückungszeit (100W Last / Min.) 22 Display LCD Warnmeldungsanzeige Acoustical Overvoltage Protection RJ11/RJ45 (Input/Output) USB 1x USB-B IEC-Ausgang 4x Colour Black Width (mm) 146 Height (mm) 160 Depth (mm) 350 Weight (kg) 6,8