Võrguseade Fluke 125 INDUSTRIAL SCOPEMETER 40MHZ

Attribute Type Attribute Value Bandwidth 40MHz Sample Rate 25MS/s Number of Inputs 2 Cursor Measurements ΔT, 1/ΔT V, ΔV, rise- and fall-time Timebase Range 20 ns - 1 min/div Rise Time 8.75ns Maximum Real Time Samling Rate 1.5G s/s Resistance 1 MOhm/12 pF Multimeter a.c. Volts 0.5 - 5 - 50 - 500 - 1250V Number of Digitisers 2 Multimeter d.c. Volts 0. - 5 - 50 - 500 - 1250V Multimeter Accuracy d.c. Volts 0.5% Maximum Record Length 512 Min/Max Points per Input Input Sensitivity 0.005 - 500V Glitch Capture 40ns Continuity Yes Multimeter Accuracy a.c. Volts 2.5% Over View Fluke 125 Industrial ScopeMeter The bus health function is used to investigate the electrical performance of the communications system giving a good or not good indication. Most types of field bus are supported. In addition the 125 incorporates Power, Harmonics and RPM Measurement. Dual input 40MHz Oscilloscope Two 5000 count True RMS Multimeter’s Bus health function for Industrial busses Connect & View Triggering Power and Harmonic Measurement High Resolution, low impedance measurement for motor windings Direct reading of RPM from external pulses Measurement of Vpwm for motors i400 Current clamp included Save & Recall functions Technical Specification Timebase Range 10ns/division to 1min/division Bus Health (Supported Busses) AS-I Bus, CAN-bus, Interbus, ControlNet, MOD-bus, Foundation Fieldbus, Profibus, Ethernet coax TP, RS-232, RS-485, user defined Power Watts, VA,VAR, Power Factor Harmonics To 33rd (fundamental 16 2/3, 50,60 & 400 Hz systems) High Resolution Low Impedance Measurement 50.00 Ohms Full Scale RPM 2 or 1 rotations per pulse, 1 rotation per 2 or 4 pulses Current Measurement using i400 Clamp 400A Safety rating Cat III 600V