Võrguseade MOXA RS-422/485 PCIe kaart, Low Profile, 4 porti (4 kV surge and 2 kV electrical isolation)

Features and Benefits PCI Express x1 compliant Serial communication speed up to 921.6 kbps 128-byte FIFO and on-chip S/W flow control Variety of connection cables and boxes available for RS- 232/422/485 Drivers provided for the latest versions of Windows, Linux, and Unix Easy maintenance with on-board LED display and management software Overview The CP-134EL-A-I is a smart PCI Express multiport serial board designed for POS and ATM applications, and for use by industrial automation system manufacturers and system integrators. The CP-134EL-A-I is compatible with all popular operating systems, and each of its 8 serial ports supports data rates of up to 921.6 kbps, and provides full modem control signals, ensuring compatibility with a wide range of serial peripherals. In addition, the CP-134EL-A-I works with PCI Express x1, allowing the board to be installed in any PCI Express slot. Intelligent RS-485 for Easy Installation and Troubleshooting (Patent Pending) Setting up an RS-485 network is relatively straightforward. The challenge comes when the power is turned on and the devices connected to the network start transmitting and receiving data. In most cases, engineers will need to further tune the system by configuring pull high/low resistors and terminators at strategic points along the network. Moxa’s new Intelligent RS-485 technology supports two essential features to make it easy: (1) One-Click Installation automatically analyzes the network topology and then adjusts terminators and pull high/low resistors. (2) One-Click Troubleshooting tells you what to change to make a deficient network viable.• Hardware Comm. Controller 16C550C compatible Bus PCI Express x1 Connector DB44 female• Serial Interface Number of Ports 4 Serial Standards RS-422/485 Max. No. of Boards per PC 4• Serial Line Protection Surge Protection 4 kV Electrical Isolation 2 kV• Performance Baudrate 50 bps to 921.6 kbps• Serial Communication Parameters Data Bits 5, 6, 7, 8 Stop Bits 1, 1.5, 2 Parity None, Even, Odd, Space, Mark Flow Control RTS/CTS, XON/XOFF• Serial Signals RS-422 TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND RS-485-4w TxD+(B), TxD-(A), RxD+(B), RxD-(A), GND RS-485-2w Data+(B), Data-(A), GND• Physical Characteristics Dimensions 67.21 x 103 mm (2.65 x 4.06 in)• Driver Support Windows Windows 2000/XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64) Linux Linux 2.4.x, 2.6.x, 3.x Unix-like Systems QNX 6, SCO OpenServer, UnixWare 7, Solaris 10 (x86/x64)Note: Please refer to Moxa’s website for the latest driver support information. • Environmental Limits Operating Temperature 0 to 55°C (32 to 131°F) Storage Temperature -20 to 85°C (-4 to 185°F) Ambient Relative Humidity 5 to 95% (non-condensing)• Standards and Certifications EMC EN 55032/24 EMI CISPR 32, FCC Part 15B Class B EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m IEC 61000-4-8• MTBF (mean time between failures) Time 433,077 hrs Standard Telcordia (Bellcore) TR/SR• Power Requirements Input Current 3,414 mA @ 3.3 VDC• Warranty Warranty Period 5 years Details See www.moxa.com/warranty