BKT Elektronik Karkass 32U 1535x600x600 k,l,s, usteta, külgedeta, kandevõime kuni 600kg, hall, SRS

ncluded in delivery: brush strip set of M6 assembly bolts (16 pcs) set of floor-leveller feet 1,5 m edge sealing 2 pairs of 19’’ mounting sections Basic version ensures optimum installation and configuration. Welded structure ensures safety of use even at maximum load. Used primarily as a network cabinet/distribution point. Protection IP20 in accordance with PN 92/E-08106/EN 60529/IEC 529. (does not apply to brush cable entries), Indoor use, . Cabinets can be arranged in line using line-up bolts after removing side walls (Part No.11190130) Cabinet frame fully welded - 1,5 mm thick sheet steel on 4 x leveling feet M10. Two pairs of the profile rails (AL-Zn coated) each arranged at the front and rear on the inside. Each profile with unit labeling, Maximum spacing between front and rear profile rails: - cabinet depth 600 mm - max 472 mm - cabinet depth 800 mm - max 672 mm - cabinet depth 900 mm - max 772 mm - cabinet depth 1000 mm - max 872 mm Possibility to increase maximum weight of equipment mounted in the cabinet SRS by using cabinet max load strengthen kit, Cables let in entry optionally either from roof or base, either, through top or bottom of the rear side of cabinet, pre-punched opening (Dimensions: 450 x 90 mm), In the roof and base of cabinet 2 x 4U blind plates (pre - punched opening) for fan units (possible configurations 1 or 2 x 2 fan units, 1 x 4 fan units, 1 x 6 fan units)