KRUNTEMAIL ANTIRUST 0,9L Black

No Brand  KRUNTEMAIL ANTIRUST 0,9L Black

Kiiresti kuivav kruntemail Pentacolor Antirust kaitseb metall pindu rooste ja kulumise eest. Sobib erinevatele teras- ja metallpindadele nii sees kui väljas. Sobib ka kasutamiseks tööstuses. Kasutada temperatuuridel 5 kuni 30 °C. Kaitsta külma eest. Kulunorm: 8 m²/l kihi kohta. Soovitatav kanda pinnale kahe kihina. Poolläikiv. Värv: must. Kogus: 0,9 l.

Pakkumised

K-rauta

Kauba kättesaamine väljastuspunktist TASUTA!

Toote vastavus:
KRUNTEMAIL ANTIRUST 0,9L MUST
Toote kirjeldus:
Tootekirjeldus inglise keeles: INFORMATIONFast drying, protecting from corrosion modified resin-based anticorrosive primer paint for protecting and finishing metal (steel) surfaces. For steel structures, metal poles, partition walls, fences, doors, gates, railings, trailers and other metal surfaces, both outside and inside. Painting of technological manufacturing equipment is also possible. Forms a solid abrasion-resistant semi-gloss coating after drying. Paint can be tinted.INSTRUCTIONS FOR USESurface preparation.Before applying anti-corrosion primer paint on steel surfaces they must be cleaned of dirt, corrosion products (rust) and grease. When the surface cannot be completely cleaned from rust stains, loose rust must be removed and the surface must be sanded using sanding tools (abrasive paper, wire brush, a grinding tool, etc.). However, anti-corrosive protection in this case will be lower.Application.Priming before painting is not necessary. White base А is used for production of lighter colours. Mix well before use, and, if necessary, dilute with wait spirit or other type of thinner (0–5 % by volume for applications with roller or brush) to the required consistency. These thinners are also used to clean the used tools. Paint application by spraying allowed only in industrial paint shops. Air and surface temperature range: from +5 °С to +35 °С. Relative humidity should not exceed 85%. Apply 2 coatings of anti-corrosion primer paint on clean and dry surface using a brush, a roller, or an airless sprayer (nozzle diameter: 0.011"—0.017"). Single layer drying time is 10 (at the temperature of +20 °С) or 14 (at the temperature of +10 °С) hours. Store in a tightly closed container away from direct sunlight. Protect from frost.Amount of paint required. Single coating coverage (depending on its thickness) indicated in the table. Recommended thickness of one coating is approx. 50–70 μm.
Hind kontrollitud:
2020-06-04
Pildid:
Pildid

1a.ee

Tallinna esindusest Liimi 4/1 10621 saab kauba kätte tasuta.

Toote vastavus:
KRUNTEMAIL ANTIRUST 0,9L MUST
Toote kirjeldus:
Tootekirjeldus inglise keeles: INFORMATIONFast drying, protecting from corrosion modified resin-based anticorrosive primer paint for protecting and finishing metal (steel) surfaces. For steel structures, metal poles, partition walls, fences, doors, gates, railings, trailers and other metal surfaces, both outside and inside. Painting of technological manufacturing equipment is also possible. Forms a solid abrasion-resistant semi-gloss coating after drying. Paint can be tinted.INSTRUCTIONS FOR USESurface preparation.Before applying anti-corrosion primer paint on steel surfaces they must be cleaned of dirt, corrosion products (rust) and grease. When the surface cannot be completely cleaned from rust stains, loose rust must be removed and the surface must be sanded using sanding tools (abrasive paper, wire brush, a grinding tool, etc.). However, anti-corrosive protection in this case will be lower.Application.Priming before painting is not necessary. White base А is used for production of lighter colours. Mix well before use, and, if necessary, dilute with wait spirit or other type of thinner (0–5 % by volume for applications with roller or brush) to the required consistency. These thinners are also used to clean the used tools. Paint application by spraying allowed only in industrial paint shops. Air and surface temperature range: from +5 °С to +35 °С. Relative humidity should not exceed 85%. Apply 2 coatings of anti-corrosion primer paint on clean and dry surface using a brush, a roller, or an airless sprayer (nozzle diameter: 0.011"—0.017"). Single layer drying time is 10 (at the temperature of +20 °С) or 14 (at the temperature of +10 °С) hours. Store in a tightly closed container away from direct sunlight. Protect from frost.Amount of paint required. Single coating coverage (depending on its thickness) indicated in the table. Recommended thickness of one coating is approx. 50–70 μm.
Hind kontrollitud:
2020-06-04
Pildid:
Pildid

Toode saadaval: - Poes - E-poes

Hinnapakkumised on indikatiivsed.
Hinnavaatlus ei vastuta hindade, laoseisude ega tooteinfo õigsuse eest.
Lõpliku hinnapakkumise tootele saab toote müüjalt.

Kommentaarid

Lisa tootele hinnang:

1 2 3 4 5

Hinnavaatlus ei vastuta kommentaaride ega hinnangute eest! Hinnavaatlus jätab endale õiguse ettehoiatamata kustutada hea tavaga vastuolevaid kommentaare ja hinnanguid!

Palume kommentaarid postitada vaid eesti või inglise keeles.
Please post comments only in Estonian or English language.
All other comments will be deleted.

Negatiivse hinnangu andmisel tuleb probleemi olemus lahti kirjutada pikemalt ja võimalikult täpselt, et oleks võimalik välja selgitada juhtumi taust. Ilma põhjenduseta negatiivsed kommentaarid võidakse eemaldada.