ARCTIC MX-6. Tüüp: Thermal grease, Toote värv: Hall, Maksimaalne kasutamistemperatuur: 150 °C. Kaal: 2 g. Kogus pakis: 1 tk, Pakendi laius: 23 mm, Pakendi sügavus: 152 mm
Alphacool stellt die neuste Generation des Eisblock Aurora Wasserkühlers für Radeon RX 7XXX Grafikkarten vor. Der Wasserkühler wurde optimiert, um die enormen Abwärme-Eigenschaften dieser Grafikkartengeneration bestmöglich abzuführen. Die Finnenstruktur wurde angepasst und die Düsenplatte modifiziert, um einen besseren Wasserdurchfluss und eine optimale Verteilung des Wassers auf den Kühlfinnen zu ermöglichen. Technische Highlights Die Finnendicke dieser Eisblock-Kühlergeneration beträgt 0,4 mm, ebenso wie der Abstand der Kühlfinnen zueinander. Die Düsenplatte verfügt über ein überarbeitetes Inlay, das den Wasserdruck besser auf die Finnen verteilt und die Wärmeaufnahme optimiert. Der angepasste Wasserzufluss verhilft dem Wasser zu einem besseren Einströmwinkel. Verchromtes Kupfer Der Kühlerboden besteht vollständig aus verchromtem Kupfer, was unempfindlicher gegenüber Säuren, Kratzern und Schäden ist als eine Vernickelung. Verchromte Kühler wurden bisher nur im Industriesektor eingesetzt, um extreme Einflüsse auf die Kühler zu bewältigen. Zusätzlich sieht die Verchromung wesentlich homogener aus und bietet einen Glanz, der durch eine Vernickelung nicht erreicht werden kann. Design Das Aurora-Design der Radeon RX 7XXX Eisblock-Generation ist optisch ruhiger und schlichter. Der Kühler wird von einem einzigen O-Ring umschlossen. Die Konstruktion rund um die Kühlfinnen und der Jetplate sorgt für eine klarere Optik. Die Beleuchtung der digital adressierbaren RGB-LEDs wird dank der Verchromung noch besser im Kühler verteilt. Das Terminal entspricht in seiner Formgebung dem klassischen Aurora Design. Wärmeleitpaste & Wärmeleitpads Im Lieferumfang ist Alphacool's Subzero Wärmeleitpaste enthalten, die zu den leistungsstärksten Wärmeleitpasten auf dem Markt gehört. Zusätzlich werden Alphacool Soft Pads mit einer Dicke von 1 mm für die Spannungswandler und den Grafikspeicher verwendet. Die Pads für die Rückseite des PCB sind 3 mm dick. Die Wärmeleitfähigkeit der Pads liegt bei 7 W/mK bzw. 3 W/mK. Das elektrisch nicht leitende Thermal Grease ist besonders gut geeignet für hohe Anpressdrücke und lässt sich aufgrund der Viskosität von 850.000 TF trotzdem perfekt verarbeiten. Kompatibilität: - PowerColor Radeon RX 7900 XTX Red Devil, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC) - PowerColor Radeon RX 7900 XTX Red Devil Limited Edition, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC/LIMITED Technische Daten Kühler Abmessungen (L x B x H) 285,50 x 144,50 x 34,20mm Material Kühlerboden verchromtes Kupfer Material Kühleroberseite Acryl Anschlüsse 4 x G1/4" Dicke Kühlfinnen 0,4mm Abstand Kühlfinnen 0,4mm Beleuchtung digital aRGB LEDs Stromanschluss digital aRGB LEDs 3-Pin JST Spannung digital aRGB LEDs 5V Anzahl digital aRGB LEDs 15 Farbe transparent Technische Daten Backplate Abmessungen (L x B x H) 285,50 x 120,00 x 6mm Material Aluminium Farbe schwarz
The Eisblock XPX Aurora Edge is a powerful CPU cooler that shows its strength especially on multi-core processors with 4, 6, 8, 12 and more CPU cores. The total area of the cooling channels on the CPU cooler base is 34 x 32 mm. This means that the Eisblock XPX Aurora Edge cooler also copes with large CPU DIEs. Performance in overflow! The Eisblock XPX Aurora Edge has a special injection technology that was developed and patented by Alphacool itself. The so-called "ramp system" is located in front of the nozzle plate and ensures an even flow of water within the cooler. The water is pressed through the nozzle plate in a controlled manner and distributed evenly over the cooler base. The radiator bottom itself has 81 cooling fins with a fin structure of only 0.2 mm per fin. In this way, the largest possible surface area has been created in the available space in order to dissipate the CPU's waste heat to the water as quickly as possible. Lighting Behind the Alpahcool logo, 2 digitally addressable 5V RGB LEDs are installed, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the digital RGB lighting, the enclosed adapter must be connected to the 3-pin female connector and connected to a digital RGB controller or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Discreet appearance The matt finish gives the cooler, which is made entirely of brass (except for the cooler bottom), a noble look. This makes it interesting for users who prefer a discreet appearance and want to do without a complex aRGB illumination. Thermal grease The thermal paste included in the delivery is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive thermal grease is particularly suitable for high contact pressures, but can still be processed perfectly due to its viscosity of 850000 TF. Compatibility: Compatibility Intel: LGA 115x / 1200 / 1700 / 2066 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data L x W x H 70 x 70 x 32,5mm Material cooler nickel plated copper Material bottom part brass Material top brass Number of aRGB LEDs 2 Threads 2 x G1/4“ Power supply Digital aRGB 3-Pin 5V Pressure tested 0,8 bar Max working temperature 60°C Net weight 694g Color chrome
Cooler Master has built upon the classic MasterLiquid L Series to present a redesigned and improved release of the MasterLiquid 360L Core ARGB White. Featuring new design elements that bring a classic minimalist look to the series, the MasterLiquid 360L Core ARGB White represents Cooler Masters ongoing innovative spirit.GEN S DUAL CHAMBER PUMPRedesigned copper base targets heat spots with precision along with boosted water flow and pressure for enhanced cooling performance.EXPANDED RADIATOR SURFACEExpanded radiator fin surface accelerates heat dissipation for superior cooling.120MM ARGB FANSUpgraded 120mm ARGB fans deliver optimal radiator performance and versatile lighting options.CRYOFUZE THERMAL PASTEIncludes premium CryoFuze thermal paste for exceptional heat conductivity.CLEAN CLASSIC DESIGNClean minimalist design brings a refreshed modern facelift to the pump cover.
ROG Ryuo III 240 all-in-one CPU liquid color with Asetek 8th gen pump solution, Anime Matrix LED Display and ROG ARGB cooling fans. - The latest 8th gen Asetek pump is armed with a 3-phase motor that delivers ultimate cooling performance with higher flow and lower impedance - The ASUS-exclusive Anime Matrix™ is a mini LED array that can display ROG-exclusive anime content, core system stats, and customized animations - Premium ROG ARGB fans offer high airflow and optimized noise levels - Aluminum components and vacuum coating provide high durability and flagship aesthetics - The ROG Ryuo series is styled to complement the ROG motherboards at the heart of a high-end build Package Content: 1 x CPU Liquid Cooler (pre-applied thermal compound) 2 x 120 mm Radiator Fan 1 x 1-to-2 Fan Splitter Cable 1 x 1-to-4 ARGB Splitter Cable 1 x Accessory Pack of Screws and Brackets 1 x Quick Start Guide 1 x ROG Sticker 1 x ROG cable organizer
The ARCTIC MX-4 is a new thermal compound that guarantees exceptional heat dissipation from components and maintains the needed stability to push your computer system to its maximum. The ARCTIC MX-4 continues to be overclocker’s ultimate choice when choosing thermal compound.
EK-Quantum Vector N+ RX 6800XT/6900XT is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for SAPPHIRE NITRO+ 6800XT and 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector N+ RX 6800XT/6900XT water block for SAPPHIRE NITRO+ GAMING RX 6800 XT and 6900 XT GPUs EK-Quantum Vector N+ RX 6800XT/6900XT water block is compatible with SAPPHIRE NITRO Radeon RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM Acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum N+ Vector RX 6800XT/6900XT D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the N+ 6800XT/6900XT water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 285x149x16.5mm Enclosed EK-Quantum Vector N+ RX 6800XT/6900XT series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
Tootekood: ROGSTRIXLCII240ARGBGTIN: 4711081145905Jahutid ja lisad
Water block dimention: 80 x 80 x 45 mm Block Material (CPU Plate): Copper Radiator Dimension: 121 x 272 x 27 mm Radiator Material: Aluminum Tube: Sleeved Rubber tube Tube Length: 380 mm Fan: ROG Designed ARGB Radiator Fan - Size: 2 x Fan Slots (120mm) - Dimension: 120 x 120 x 25 mm - Speed: 800 - 2500 RPM +/- 10% - Static Pressure: 5.0 mmH2O - Air Flow: 80.95 CFM / 137.5 m3h - Noise: 37.6 dB(A) - Control Mode: PWM/ DC AMD: AM4 Package Content: 1 x Liquid Cooler (pre-applied thermal compound) 2 x 120 mm ARGB Radiator Fan 1 x Accessory Pack of Screws and Brackets 1 x Quick Start Guide 1 x USB cable for software control 1 x 1-to-2 Fan Splitter Cable 1 x 1 to 4 ARGB spliter cable
This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for EVGA® FTW3 RTX 3070 graphics cards based on the latest NVIDIA® Ampere™ architecture. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator. An EK Water Block for FTW3 RTX 3070 EK-Quantum Vector FTW3 3070 D-RGB water block is compatible with FTW3 RTX 3070 graphics cards. The Vector water block actively cools the GPU, VRAM, power stages, and chokes in the VRM (voltage regulation module). These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The fin array is populated by 28 microfins with 0.6mm wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards. The base of the block is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of durable POM acetal. These 2nd generation Vector GPU water blocks also feature Acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector FTW3 RTX 3070 D-RGB water block The aesthetic corner end-piece is housing the addressable D-RGB LEDs. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the EK-Quantum Vector FTW3 3070 water block EK recommends the purchase of a retention backplate, especially for the 3070 models of graphics cards. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, and backside of the printed circuit board VRM section. Technical Specification Dimensions: (LxHxW) - 314x155x21mm Enclosed EK-Quantum Vector FTW3 RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
ROG Ryuo III 360 all-in-one CPU liquid color with Asetek 8th gen pump solution, Anime Matrix™ LED Display and ROG ARGB cooling fans - The latest 8th gen Asetek pump is armed with a 3-phase motor that delivers ultimate cooling performance with higher flow and lower impedance - The ASUS-exclusive Anime Matrix™ is a mini LED array that can display ROG-exclusive anime content, core system stats, and customized animations - Premium ROG ARGB fans offer high airflow and optimized noise levels - Aluminum components and vacuum coating provide high durability and flagship aesthetics - The ROG Ryuo series is styled to complement the ROG motherboards at the heart of a high-end buil - Package Content: 1 x CPU Liquid Cooler (pre-applied thermal compound) 3 x 120 mm Radiator Fan 1 x 1-to-3 Fan Splitter Cable 1 x 1-to-4 ARGB Splitter Cable 1 x Accessory Pack of Screws and Brackets 1 x Quick Start Guide 1 x ROG Sticker 1 x ROG cable organizer
Elevate your gaming rig with the ASUS ROG STRIX LC III 360 ARGB LCD processor liquid cooling system. Designed for gamers and enthusiasts, this high-performance cooling solution features three 120mm ROG STRIX AF-12S ARGB fans and a 7th Generation Asetek pump, ensuring your CPU stays cool even during intense gaming sessions. The customizable 2.1" Full Color IPS LCD display not only adds a touch of personalization to your setup but also allows for real-time system monitoring, keeping you informed of your system's performance. With ASUS Aura Sync compatibility, synchronize your cooling system's lighting effects with other Aura-enabled components and peripherals to create a cohesive and visually appealing gaming environment. The cooling system's broad compatibility with multiple Intel and AMD sockets ensures it fits seamlessly into your existing or new build. Additionally, the inclusion of anti-vibration rubber pads and 0dB Technology ensures that your gaming experience remains uninterrupted by noise. Installation is made easy with a comprehensive mounting kit, pre-applied thermal compound, and sleeved rubber tubes, allowing you to set up your cooling system with ease. Choose the ASUS ROG STRIX LC III 360 ARGB LCD for a cooling solution that combines performance, aesthetics, and convenience, ensuring your gaming rig stands out.
The new Pure Rock 2 Black from be quiet! provides quiet cooling for multimedia and graphics applications. Its high-performance heat pipes and the Pure Wings 2 120mm PWM fan offer an unbeatable price-performance ratio. Top features of the Pure Rock 2 Black: Strong cooling power of 150W TDP Four powerful 6mm heat pipes with HDT technology Asymmetrical design holds memory banks Friday Pure Wings 2 120mm PWM fan for quiet operation with a maximum of 26.8 dB (A) Airflow-optimized fan blades to reduce noise-causing air turbulence Brushed aluminum finish The easy-to-understand installation kit can be easily installed from above Three years manufacturer warranty Technical specifications: Working area (W): 150 Dimensions (L x W x H): 62 x 121 x 155mm Number of cooling fins: 55 Material of the cooling fins: aluminum Material of the cooler base: aluminum / copper Number of heat pipes, diameter 4 / 6mm Fan data: Dimensions: 120 x 120 x 25mm Speed at 100% PWM (rpm): 1,500 Nominal voltage: 12V Power consumption: 1.44W Connector: 4-pin PWM Cable length: 220mm Scope of delivery: 1x be quiet! Pure Rock 2 Black Thermal paste (already applied) Backplate mounting set
Product information "KryoSheet - 0.2 mm - 68 x 51 mm" The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity. This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible. Outstanding thermal conductivity Easy to use Consistently high performance Extreme durability Attention: Electrically conductive! Follow instructions! The KryoSheet graphene pads have a molecular structure stacked in the Z-direction. This optimised structure enables outstanding and constant thermal conductivity. This is due to a specially developed manufacturing process in which the hexagonal crystal structure of the graphite is broken up along the basal plane in order to exploit the anisotropy of the graphite's thermal conductivity. However, as a side effect of this complex manufacturing process, the electrical conductivity is also increased and the stability of the KryoSheet pads is affected, so that the pads should only be used according to instructions! KryoSheet is available pre-assembled in various CPU/GPU standard sizes, e.g.: Note: Multiple use of KryoSheet is not recommended! When dismantling the cooler and handling the KryoSheet after use, microcracks may occur in the structure of the graphene pads, which may impair Performance.
The NH-U14S is the 14cm top model of Noctua’s classic U-series single tower CPU coolers, which have received more than 400 awards and recommendations from the international press. While the large, six heatpipe design and the NF-A15 140mm fan with PWM support for fully automatic speed control allow the cooler to best the renowned quiet cooling performance of all other U-series coolers, its 52mm slim shape still guarantees full compatibility with tall RAM modules on LGA2011. Topped off with the trusted, pro-grade SecuFirm2™ multi-socket mounting system, Noctua’s proven NT-H1 thermal compound and full 6 years manufacturer’s warranty, the NH-U14S is a complete premium quality solution that combines superb performance, high compatibility and quiet operation.Attachment for ATX-Mainboards, screwedSocketsuitable AM2, AM2+, 1156, AM3, 1155, AM3+, FM1, 2011, 1150, FM2, 2011-3MaterialAluminum YesCooper YesPower Connection PWM fan connectorFan Bearing SSOPower Input 0 - 1.56 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 300 - 1500 rpmVolume 19.2 - 24.6 dB(A)Volumetric Flow 111.5 - 140.2 m3/h, 65.6 - 82.5 cfmDimensionsFans Fan 1 140 x 150 x 25 mmCooler 150 x 165 x 52 mmTotal 150 x 165 x 78 mmWeightCooler 935 gramsFeaturesincluding Thermal Paste/Pad Yes
Successor to the award-winning NH-C14, the NH-C14S is an elite class top-flow CPU cooler that is extremely efficient, highly compatible and remarkably adjustable. Thanks to its deeper fin stack and the renowned NF-A14 PWM fan, the single fan NH-C14S provides similar quiet cooling performance to its dual fan predecessor while being even more versatile: With the fan installed on top of the fins, the cooler is compatible with RAM modules of up to 70mm height. With the fan installed underneath the fins, the total height of the cooler is only 115mm, making it suitable for use in many HTPC cases. At the same time, the new offset layout allows it to clear the top PCIe slot on most µATX and ATX motherboards. Topped off with the trusted, pro-grade SecuFirm2™ multi-socket mounting system, Noctua’s proven NT-H1 thermal compound and full 6 years manufacturer’s warranty, the NH-C14S is a premium quality top-flow solution for the highest demands.SobilikProtsessorTüüpJahutiVentilaatori läbimõõt14 cmToetatud protsessoripesadPistikupesa AM2, Pistikupesa AM2+, Pistikupesa AM3, Socket AM3+, Socket FM1, Socket FM2, Socket FM2+, LGA 1151 (Socket H4), LGA 2011-v3 (Socket R)Pöörlemiskiirus (min)300 RPMPöörlemiskiirus (max)1500 RPMMaterjalAlumiinium, VaskPinge12Laius140 mmSügavus163 mmKõrgus115 mmKaal820 gVentilaatori mõõdud (laius x sügavus x kõrgus)140 x 140 x 25 mmMüratase19,2 dB
XC029 The compact XC029 with its tower design is the new multi-socket cooler from the Performance C Series. Three high-performance copper heat pipes dissipate 150W waste heat to the innumerable cooling fins. These reasons make the cooler ideal for powerful multi-core processors. Additionally, the heat transmission between CPU and cooler is very evenly and efficient due to the direct contact of heat pipes and CPU. The mounting material make this cooler suitable for all current AMD and INTEL sockets. The scope of delivery not only includes the heat sink tower, as well as the 92mm PWM fan but also a holding module for Intel sockets 1150/1151/1155/1156/2011/2066 AMD sockets FM2+/FM1/FM2/AM2/AM2+/AM3 and a tube of thermal paste. For the correct installation an illustrated manual is included. - silent hydro bearing 120mm fan - three 6mm copper heat pipes for better heat flow - fin Design for high airflow and efficient cooling of the CPU and surrounding components - slight overhang of the fan avoids hotspots - possible mounting of the fan on both sides of the heat sink - suitable for all current AMD and INTEL sockets
Die Kryonaut-Wärmeleitpaste wurde speziell für die extrem anspruchsvollen Anwendungen und die höchsten Ansprüche der Overlocking-Community entwickelt. Kryonaut empfiehlt sich auch als Top-Produkt für Industrielösungen. Speziell für Overclocking Exzellente Wärmeleitfähigkeit Keine Aushärtung Hohe Langzeitstabilität Nicht elektrisch leitend Technische Daten Menge: 3 ml / 11,1 g Wärmeleitfähigkeit: 12,5 W/(m·K) Dichte: 3,7 g/cm³ Viskosität: 120 - 170 Pa·s Einsatztemperatur: -200 bis +350 °C
Product Details Notes and warnings The NH-L9a-AM4 is a highly compact, quiet low-profile cooler designed for use in small form factor cases and HTPC environments. While it provides first-rate performance in its class, it is not suitable for overclocking and or CPUs that create high heat loads. Please consult our CPU compatibility list to find out whether the NH-L9a-AM4 is recommended for your CPU/APU. Cooler Specification Socket compatibility AMD AM4 Height (without fan) 23 mm Width (without fan) 114 mm Depth (without fan) 92 mm Weight (without fan) 390 g Height (with fan) 37 mm Width (with fan) 114 mm Depth (with fan) 92 mm Weight (with fan) 465 g Material Copper (base and heat-pipes), aluminium (cooling fins), soldered joints & nickel plating Max. TDP see CPU compatibility list max_tdp Fan compatibility 92x92x14mm, 92x92x25mm Scope of delivery Black NH-L9a-AM4 heatsink NF-A9x14 HS-PWM chromax.black premium fan NA-RC7 Low-Noise Adaptor (L.N.A.) NT-H1 high-grade thermal compound Black SecuFirm2™ AM4 mounting kit Black Screws for 92x92x25mm fans Noctua Metal Case-Badge
The Arctic MX-4 is a thermal compound that guarantees exceptional heat dissipation from components and maintains the needed stability to push your computer system to its maximum. The Arctic MX-4 continues to be overclocker's ultimate choice when choosing thermal compound.
The NH-U12S chromax.black is an all-black version of Noctua’s award-winning NH-U12S premium-quality quiet CPU cooler. Thanks to the same proven slim-tower heatsink design and NF-F12 PWM fan, it stays true to the NH-U12S’s successful formula of fusing excellent cooling performance with superb quietness of operation and outstanding RAM, case and PCIe compatibility. At the same time, the chromax.black version with its black fan and black coated heatsink combines these assets with a sleek stealth look. Topped off with the renowned SecuFirm2™ multi-socket mounting system, Noctua’s enthusiast-grade NT-H1 thermal compound thermal compound and a full 6-year manufacturer’s warranty, the NH-U12S chromax.black is a premium choice for customers who seek a highly compatible 120mm heatsink that looks just as great as it cools.Award-winning NH-U12S coolerTens of thousands of enthusiast users all over the world swear by the NH-U12S’s quality and performance. Recommended by more than 200 international hardware websites and magazines, it is renowned as being one of the best 120mm coolers on the market.chromax.black designThe NH-U12S chromax.black is black from head to toe: Featuring a black coated heatsink, black fans with black anti-vibration-pads, black fan clips and black mounting parts, it’s right at home in all-black builds and easy to integrate with other colour schemes.Colour-customisableUsing the optional NA-HC1 and NA-HC2 heatsink covers as well as the NA-SAVP1 anti-vibration pads (available in black, blue, green, red, yellow, white), the NH-U12S chromax.black can be fully customised to fit popular build colour schemes such as black and red or black and white.100% RAM compatibilityThanks to its slim design with only 45mm fin depth, the NH-U12S will not overhang the RAM slots even with two fans installed. This gives the user full access to the memory modules on all current CPU sockets and guarantees 100% compatibility with tall heatspreaders or optional memory fans.*Classic 120mm tower size for excellent overall compatibilityStanding 158mm tall, the NH-U12S is short enough to fit most modern mid- or high-end tower cases. Measuring 125mm wide (including fan and fan clips), the cooler stays clear of the top PCIe slot on most standard ATX or Micro-ATX motherboards, ensuring optimum compatibility with multi-GPU setups.NF-F12 120mm Focused Flow™ fanRecommended by more than 150 hardware publications and thousands of enthusiasts world-wide, the Noctua's premium quality NF-F12 Focused Flow™ 120mm fan is renowned to combine superb static pressure, excellent heatsink performance and surprising quietness of operation.PWM support and Low-Noise AdaptorThe NF-F12 120mm fan supplied with the NH-U12S supports PWM for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1500 to 1200rpm using the supplied Low-Noise Adaptor for even quieter operation.Anti-vibration pads and fan-clips for second NF-F12 (optional)For users who want to achieve even better performance by adding a second, optional NF-F12 PWM chromax.black.swap fan to create a push/pull setup, the NH-U12S includes fan clips and an extra set of custom-designed anti-vibration pads that allow to off-set the rear fan by 5mm to improve acoustics in dual-fan mode.SecuFirm2™ multi-socket mounting systemNoctua’s SecuFirm2™ mounting systems have become synonymous with quality, safety and easy installation. Supporting Intel LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) and LGA20xx (LGA2066, LGA2011-0, LGA2011-3), as well as AMD AM4, AM3(+), AM2(+), FM2(+) and FM1, the SecuFirm2™ mounting included with the NH-U12S is straightforward to install, provides perfect contact pressure and will stand the test of time even under heavy use.Compatibility with past and future socketsThanks to Noctua’s SecuFirm™ ecosystem, the NH-U12S can be made compatible with the older LGA1366 and LGA775 sockets using the optional NM-I3 mounting kit, which is provided free of charge. If technically possible, Noctua will also provide upgrade kits for future sockets, which makes the NH-U12S a safe long-term investment.NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds.Soldered interface between heatpipes and finsWith many heatsinks, the fins are press-fitted to the heatpipes. Due to the different thermal expansion coefficients of copper and aluminium, this fit can loosen over years of thermal cycling, which may lead to reduced performance. By contrast, the NH-U12S’s fins are soldered to the heatpipes in order to guarantee a superior thermal interface that doesn’t deteriorate even after many years of usage.
The ARCTIC MX-4 is a new thermal compound that guarantees exceptional heat dissipation from components and maintains the needed stability to push your computer system to its maximum. The ARCTIC MX-4 continues to be overclocker’s ultimate choice when choosing thermal compound.Exceptional performanceThe ARCTIC MX-4 is composed of carbon micro-particles that lead to an extremely high thermal conductivity. It guarantees quick and efficient dissipation of heat from the CPU or GPU.Safe and easy applicationThe ARCTIC MX-4 is a metal-free and non-electrically conductive compound.That eliminates the risks of short circuit and provides protection to your computer. Also the application is very easy as the consistency is just ideal for application on chips.Great valueWith the competitive pricing of the ARCTIC MX-4, the performance of the ARCTIC MX-4 is the best thermal compound on the market.Content 4 gramme
EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Strix 6800/6900 water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300.5x157x19.5mm Enclosed EK-Quantum Vector Strix RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
EK-Quantum Vector Strix RX 6800/6900 is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for ROG Strix RX 6800, 6800XT, 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector Strix RX 6800/6900 water block for ROG Strix GAMING RX 6800 and 6900 GPUs EK-Quantum Vector RX 6800/6900 water block is compatible with ASUS® ROG Strix GAMING Radeon RX 6800, RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector Strix RX 6800/6900 D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the Strix 6800/6900 water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 300.5x157x19.5mm Enclosed EK-Quantum Vector Strix RX 6800/6900 series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
When putting down, nothing beats smooth and easy. That is why we created the PK-2 thermal compound. The PK-2 thermal compound is a high performance thermal bonding agent specially designed for easy application.PK-2's core feature is its low viscosity, allowing for one to quickly and easily apply the thinnest coat of thermal compound possible.This will get your components up close and personal in no time.Soojusjuhtivus10,2 W/m·KKaal5 g
Tootja: Gembird Tootegrupp: jahutuse tarvikud Lisaandmed: Thermal silicone compound (grease) for heatsinks, Excellent thermal takistus, Helps the heat dissipation from a CPU, kiibistik või protsessor to a heatsink, Perfect stability - will not separate, run, migrate, või bleed, Non mahtuvuslik või elektrilinely conductive, Netokaal
Die Kryonaut-Wärmeleitpaste wurde speziell für die extrem anspruchsvollen Anwendungen und die höchsten Ansprüche der Overlocking-Community entwickelt. Kryonaut empfiehlt sich auch als Top-Produkt für kritische Kühlsysteme im Industriebereich. Speziell für Overclocking Exzellente Wärmeleitfähigkeit Keine Aushärtung Hohe Langzeitstabilität Nicht elektrisch leitend
