Jahutid ja lisad

Prolimatech PK230g

Wärmeleitpaste von Zalman, Super Thermal Compound 7 (STC7), 7,2 W/mK Wärmeleitfähigkeit, 4 g Tube

EK-Quantum Vector N+ RX 6800XT/6900XT is a 2nd generation Vector GPU water block from the EK® Quantum Line. It is made for SAPPHIRE NITRO+ 6800XT and 6900XT graphics cards based on the latest AMD® RDNA2™ architecture. EK-Quantum Vector N+ RX 6800XT/6900XT water block for SAPPHIRE NITRO+ GAMING RX 6800 XT and 6900 XT GPUs EK-Quantum Vector N+ RX 6800XT/6900XT water block is compatible with SAPPHIRE NITRO Radeon RX 6800XT, and 6900XT graphics cards. The Vector water block directly cools the GPU, VRAM, and the VRM (voltage regulation module) as a cooling liquid is channeled right over these critical areas. The water block is in contact with power stages as well as Inductor chokes to maximize cooling and minimize the chances of coil whine. These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The base of the block is CNC-machined out of high-grade nickel-plated electrolytic copper, while its top is CNC-machined out of durable black POM Acetal. These 2nd generation Vector GPU water blocks also feature acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum N+ Vector RX 6800XT/6900XT D-RGB water block The aesthetic end-piece is housing the addressable D-RGB LED strip. These water blocks boast a total of 9 individually addressable RGB LEDs, and a LED-lit terminal. They are compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the N+ 6800XT/6900XT water block EK recommends the purchase of a retention backplate, which improves the overall aesthetics of your graphics cards, and also provides additional passive cooling for the GPU core and backside of the printed circuit board VRM and VRAM sections. Technical Specification Dimensions: (LxHxW) - 285x149x16.5mm Enclosed EK-Quantum Vector N+ RX 6800XT/6900XT series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)

Elevate your gaming rig with the ASUS ROG STRIX LC III 360 ARGB LCD processor liquid cooling system. Designed for gamers and enthusiasts, this high-performance cooling solution features three 120mm ROG STRIX AF-12S ARGB fans and a 7th Generation Asetek pump, ensuring your CPU stays cool even during intense gaming sessions. The customizable 2.1" Full Color IPS LCD display not only adds a touch of personalization to your setup but also allows for real-time system monitoring, keeping you informed of your system's performance. With ASUS Aura Sync compatibility, synchronize your cooling system's lighting effects with other Aura-enabled components and peripherals to create a cohesive and visually appealing gaming environment. The cooling system's broad compatibility with multiple Intel and AMD sockets ensures it fits seamlessly into your existing or new build. Additionally, the inclusion of anti-vibration rubber pads and 0dB Technology ensures that your gaming experience remains uninterrupted by noise. Installation is made easy with a comprehensive mounting kit, pre-applied thermal compound, and sleeved rubber tubes, allowing you to set up your cooling system with ease. Choose the ASUS ROG STRIX LC III 360 ARGB LCD for a cooling solution that combines performance, aesthetics, and convenience, ensuring your gaming rig stands out.

Thermal grease, 3ml/7.8g

Prolimatech Thermal Compound PK-1, 30g (PK130g)

This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for EVGA® FTW3 RTX 3070 graphics cards based on the latest NVIDIA® Ampere™ architecture. An EK Water Block for FTW3 RTX 3070 EK-Quantum Vector FTW3 3070 D-RGB water block is compatible with FTW3 RTX 3070 graphics cards. The Vector water block actively cools the GPU, VRAM, power stages, and chokes in the VRM (voltage regulation module). These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The fin array is populated by 28 microfins with 0.6mm wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards. The base of the block is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of glass-like cast Acrylic. These 2nd generation Vector GPU water blocks also feature Acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector FTW3 RTX 3070 D-RGB water block The aesthetic corner end-piece is housing the addressable D-RGB LEDs. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the EK-Quantum Vector FTW3 3070 water block EK recommends the purchase of a retention backplate, especially for the 3070 models of graphics cards. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, and backside of the printed circuit board VRM section. Technical Specification Dimensions: (LxHxW) - 314x155x21mm Enclosed EK-Quantum Vector FTW3 RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)

Thermal Compound

thermal grease, NPT-1580

thermal grease, NPT-1581

NATEC termopasta Thermal Grease Husky 4g

The Arctic MX-4 is a thermal compound that guarantees exceptional heat dissipation from components and maintains the needed stability to push your computer system to its maximum. The Arctic MX-4 continues to be overclocker's ultimate choice when choosing thermal compound.

Asus ROG RG-07 Performance

Thermal grease, 1.5ml/3.9g

Thermal grease, ACTCP00001B

The ARCTIC MX-4 is a new thermal compound that guarantees exceptional heat dissipation from components and maintains the needed stability to push your computer system to its maximum. The ARCTIC MX-4 continues to be overclocker’s ultimate choice when choosing thermal compound.

CM THERMAL GREASE

Cooler Master has built upon the classic MasterLiquid L Series to present a redesigned and improved release of the MasterLiquid 360L Core ARGB. Featuring new design elements that bring a classic minimalist look to the series, the MasterLiquid 360L Core ARGB represents Cooler Masters ongoing innovative spirit.GEN S DUAL CHAMBER PUMPRedesigned copper base targets heat spots with precision along with boosted water flow and pressure for enhanced cooling performance.EXPANDED RADIATOR SURFACEExpanded radiator fin surface accelerates heat dissipation for superior cooling.120MM ARGB FANSUpgraded 120mm ARGB fans deliver optimal radiator performance and versatile lighting options.CRYOFUZE THERMAL PASTEIncludes premium CryoFuze thermal paste for exceptional heat conductivity.CLEAN CLASSIC DESIGNClean minimalist design brings a refreshed modern facelift to the pump cover.

The NH-D15 G2 is the further improved second generation of Noctua’s iconic NH-D15. With its state-of-the-art, speed-offset NF-A14x25r G2 PWM fans, eight heatpipes and asymmetrical fin-stacks that have been carefully fine-tuned to work in tandem with the new fans, it achieves even better quiet cooling performance than its award-winning predecessor. As such, the G2 version is a true flagship model that continues the legacy of the original NH-D15 by pushing the boundaries of air cooling and rivalling the efficiency of many all-in-one (AIO) water cooling solutions. In addition to its further improved performance, the NH-D15 G2 also offers enhanced compatibility thanks to an offset construction that allows it to clear the top PCIe x16 slot on most current motherboards. Last but not least, the G2 version has been upgraded to the Torx®-based SecuFirm2+™ multi-socket mounting system with included NM-SD1 screwdriver as well as to Noctua’s superior NT-H2 thermal compound. In short, the NH-D15 G2 has been further refined in virtually all respects from the heatsink and the fans all the way down to the mounting, thermal paste and accessory package. Topped off with Noctua’s trusted 6-year manufacturer’s warranty, it’s the new number one choice for customers who demand the best of the best in air cooling.

MSI's mainstream MAG series epitomizes stability and durability and is built to withstand the most intense gaming sessions. The entire lineup features robust construction with metallic-like hardness and excellent heat dissipation, ensuring stability for all critical gaming components. MAG-COREFROZR-AA13 - CycloBlade7 Design: Focuses airflow and reduces noise. - The fan design uses Rifle bearings, which effectively reduce fan noise and increase operational lifespan. - ARGB: Customize the perfect lighting effects for you through MSI CENTER. Compact Design, Powerful Cooling With a height of just 152mm, the cooler fits most mid-tower cases, offering great compatibility without sacrificing performance. Direct Touch Heat-pipes Direct touch heat-pipes ensures better heat transfer by placing copper heat pipes directly against the CPU surface. Efficient Quad Heat pipes Four 6mm copper heat pipes rapidly channel heat away from the CPU, enhancing thermal dissipation across the fin array. TDP 240W Based on internal testing with an Intel Core i9-14900K platform Pre-Applied Thermal Paste Comes with pre-applied thermal compound for a hassle-free installation and optimal contact out of the box. Laser-Etched Dragon Spirit The top cover features a finely laser-etched MSI Dragon emblem, showcasing iconic detail and craftsmanship. High-Density Fins & Optimized Airflow Path Features 50 tightly packed cooling fins with a low-resistance airflow design. This combination ensures focused air pressure, enhanced cooling efficiency, and quieter operation. Mounting Kit for Intel & AMD Includes mounting kits for both Intel and AMD platforms, supporting LGA 1700 / 1851 and AM4 / AM5 sockets. Spring-screw design ensures easier installation, with Intel kit pre-installed out of the box.

The NH-L9x65 is a taller, performance-enhanced version of Noctua’s award-winning NH-L9 low-profile coolers. With 65 instead of 37mm height and four instead of two heatpipes, the NH-L9x65 is more powerful than its smaller siblings yet retains their 95x95mm footprint, which guarantees 100% RAM and PCIe compatibility on Intel based ITX mainboards and makes the cooler more convenient to work with as it doesn’t overhang near-socket connectors. Thanks to the highly optimised NF-A9x14 premium fan that supports fully automatic speed control via PWM, the NH-L9x65 runs remarkably quiet. Topped off with the professional SecuFirm2™ multi-socket mounting system for Intel and AMD, Noctua’s renowned NT-H1 thermal compound and 6 years manufacturer’s warranty, the NH-L9x65 fuses everything users have come to expect from Noctua’s larger coolers into a compact premium package for space restricted systems.Caution: The NH-L9x65 is a highly-compact low-profile quiet cooler designed for use in small form factor cases and HTPC environments. While it provides first rate performance in its class, it is not suitable for overclocking and should be used with care on CPUs with more than 84W TDP (Thermal Design Power). Please consult our TDP guidelines to find out whether the NH-L9x65 is recommended for your CPU.SobilikProtsessorTüüpJahutiVentilaatori läbimõõt9,2 cmToetatud protsessoripesadPistikupesa AM2, Pistikupesa AM2+, Pistikupesa AM3, Socket AM3+, Socket FM1, Socket FM2, Socket FM2+Pöörlemiskiirus (min)600 RPMPöörlemiskiirus (max)2500 RPMMüratase (aeglane kiirus)14,8 dBMüratase (suur kiirus)23,6 dBMinimaalne õhusurve1,06 mmH2OMaksimaalne õhusurve2,11 mmH2OÕhuvool57,5 m³/hKeskmine tõrkeintervall (MTBF)150000 hPinge12Laius95 mmSügavus65 mmKõrgus95 mmKaal413 gVentilaatori mõõdud (laius x sügavus x kõrgus)92 x 14 x 92 mmJahutusradiaatori mõõtmed (laius x sügavus x kõrgus)95 x 51 x 95 mmJahutusradiaatori kaal340 g

Improved Cooling Performance by New Production Process The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity. Wide RPM Range The Alpine 23 CO features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed. Lower Power Consumption & Minimum Vibration The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance. For Continuous Operation The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Pre-applied MX-2 Thermal Paste The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation. Easy and fast Installation Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight. Technical Data Compatibility AMD Socket: AM4 Ram Clearance: unlimited Warranty: 6 Years Heatsink Outer Diameter: 93.4 mm Fin Material: Aluminum Number of Fins: 50 Y-shaped Fins Thermal Paste: MX-2 pre-applied Fan Fan Diameter: 90 mm Fan Speed: 100 - 2000 rpm Fan Bearing: Dual Ball Bearing Noise Level: 0.3 Sone Current: 0.06 A Connector: 4-Pin Size & Weight Lenght: 98.6 mm Width: 121 mm Height: 65 mm Weight: 275.5

The NH-U12S chromax.black is an all-black version of Noctua’s award-winning NH-U12S premium-quality quiet CPU cooler. Thanks to the same proven slim-tower heatsink design and NF-F12 PWM fan, it stays true to the NH-U12S’s successful formula of fusing excellent cooling performance with superb quietness of operation and outstanding RAM, case and PCIe compatibility. At the same time, the chromax.black version with its black fan and black coated heatsink combines these assets with a sleek stealth look. Topped off with the renowned SecuFirm2™ multi-socket mounting system, Noctua’s enthusiast-grade NT-H1 thermal compound thermal compound and a full 6-year manufacturer’s warranty, the NH-U12S chromax.black is a premium choice for customers who seek a highly compatible 120mm heatsink that looks just as great as it cools.Award-winning NH-U12S coolerTens of thousands of enthusiast users all over the world swear by the NH-U12S’s quality and performance. Recommended by more than 200 international hardware websites and magazines, it is renowned as being one of the best 120mm coolers on the market.chromax.black designThe NH-U12S chromax.black is black from head to toe: Featuring a black coated heatsink, black fans with black anti-vibration-pads, black fan clips and black mounting parts, it’s right at home in all-black builds and easy to integrate with other colour schemes.Colour-customisableUsing the optional NA-HC1 and NA-HC2 heatsink covers as well as the NA-SAVP1 anti-vibration pads (available in black, blue, green, red, yellow, white), the NH-U12S chromax.black can be fully customised to fit popular build colour schemes such as black and red or black and white.100% RAM compatibilityThanks to its slim design with only 45mm fin depth, the NH-U12S will not overhang the RAM slots even with two fans installed. This gives the user full access to the memory modules on all current CPU sockets and guarantees 100% compatibility with tall heatspreaders or optional memory fans.*Classic 120mm tower size for excellent overall compatibilityStanding 158mm tall, the NH-U12S is short enough to fit most modern mid- or high-end tower cases. Measuring 125mm wide (including fan and fan clips), the cooler stays clear of the top PCIe slot on most standard ATX or Micro-ATX motherboards, ensuring optimum compatibility with multi-GPU setups.NF-F12 120mm Focused Flow™ fanRecommended by more than 150 hardware publications and thousands of enthusiasts world-wide, the Noctua's premium quality NF-F12 Focused Flow™ 120mm fan is renowned to combine superb static pressure, excellent heatsink performance and surprising quietness of operation.PWM support and Low-Noise AdaptorThe NF-F12 120mm fan supplied with the NH-U12S supports PWM for convenient automatic speed control through the motherboard. In addition, the maximum fan speed can be reduced from 1500 to 1200rpm using the supplied Low-Noise Adaptor for even quieter operation.Anti-vibration pads and fan-clips for second NF-F12 (optional)For users who want to achieve even better performance by adding a second, optional NF-F12 PWM chromax.black.swap fan to create a push/pull setup, the NH-U12S includes fan clips and an extra set of custom-designed anti-vibration pads that allow to off-set the rear fan by 5mm to improve acoustics in dual-fan mode.SecuFirm2™ multi-socket mounting systemNoctua’s SecuFirm2™ mounting systems have become synonymous with quality, safety and easy installation. Supporting Intel LGA115x (LGA1150, LGA1151, LGA1155, LGA1156) and LGA20xx (LGA2066, LGA2011-0, LGA2011-3), as well as AMD AM4, AM3(+), AM2(+), FM2(+) and FM1, the SecuFirm2™ mounting included with the NH-U12S is straightforward to install, provides perfect contact pressure and will stand the test of time even under heavy use.Compatibility with past and future socketsThanks to Noctua’s SecuFirm™ ecosystem, the NH-U12S can be made compatible with the older LGA1366 and LGA775 sockets using the optional NM-I3 mounting kit, which is provided free of charge. If technically possible, Noctua will also provide upgrade kits for future sockets, which makes the NH-U12S a safe long-term investment.NT-H1 thermal compoundNoctua’s much-acclaimed NT-H1 is a pro-grade TIM solution that provides minimum thermal resistance, excellent ease of use and outstanding reliability. Chosen again and again by overclockers and enthusiast users worldwide, it has established itself as a benchmark for premium-quality thermal compounds.Soldered interface between heatpipes and finsWith many heatsinks, the fins are press-fitted to the heatpipes. Due to the different thermal expansion coefficients of copper and aluminium, this fit can loosen over years of thermal cycling, which may lead to reduced performance. By contrast, the NH-U12S’s fins are soldered to the heatpipes in order to guarantee a superior thermal interface that doesn’t deteriorate even after many years of usage.

The NH-L9i is a premium quality quiet CPU cooler for Intel LGA115x based HTPCs and Small Form Factor systems. At a super-low profile of only 37mm, the NH-L9i is ideal for extremely slim cases and due to its 95x95mm footprint, it provides full compatibility with tall RAM modules and VGA cards on mini-ITX mainboards. The custom designed SecuFirm2™ mounting system for LGA115x makes installation a child’s play and thanks to the highly optimised NF-A9x14 premium fan that supports fully automatic speed control via PWM, the NH-L9i runs remarkably quiet. Topped off with Noctua’s renowned NT-H1 thermal compound, the NH-L9i fuses everything users have come to expect from Noctua’s larger coolers into a super-compact package for slim HTPC systems.Caution: The NH-L9i is a highly-compact low-profile quiet cooler designed for use in small form factor cases and HTPC environments. While it provides first rate performance in its class, it is not Suitable for overclocking and should be used with care on CPUs with more than 65W TDP (Thermal Design Power). Please consult our TDP guidelines to find out whether the NH-L9i is recommended for your CPU.Attachment for ATX-Mainboards, screwedSocketsuitable 1156, 1155, 1150MaterialAluminum YesCooper YesPower Connection PWM fan connectorFan Bearing SSOPower Input 0 - 2.52 watt(s)Voltage Range 0 - 12 VNumber of Revolutions 300 - 2500 rpmVolume 0 - 23.6 dB(A)Volumetric Flow 0 - 57.5 m3/h, 0 - 33.8 cfmCabel Length 20 mDimensionsFans Fan 1 92 x 14 x 92 mmCooler 95 x 23 x 95 mmTotal 95 x 37 x 95 mmWeightCooler 420 gramsFeaturesincluding Thermal Paste/Pad YesCooling Performance 65 watt(s)

Socket compatibility:Intel LGA2066, LGA2011-0 & LGA2011-3 (Square ILM), LGA1156, LGA1155, LGA1151, LGA1150 & AMD AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+ (backplate required), AM4 Height (without fan):160 mm Width (without fan):150 mm Depth (without fan):135 mm Weight (without fan):980 g Height (with fan):165 mm Width (with fan):150 mm Depth (with fan):161 mm Weight (with fan):1320 g Material:Copper (base and heat-pipes) aluminium (cooling fins) soldered joints & nickel plating Max. TDP:see CPU compatibility list Fan compatibility:140x150x25 (with 120mm mounting holes) 140x140x25 (with 120mm mounting holes) 120x120x25 Scope of delivery:Black NH-D15 heatsink 2x NF-A15 HS-PWM chromax.black premium fan 2x Low-Noise Adaptor (L.N.A.) 4-pin PWM Y-cable NT-H1 high-grade thermal compound Black SecuFirm2™ Mounting Kit Noctua Metal Case-Badge

The ARCTIC MX-4 is a new thermal compound that guarantees exceptional heat dissipation from components and maintains the needed stability to push your computer system to its maximum. The ARCTIC MX-4 continues to be overclocker’s ultimate choice when choosing thermal compound.Exceptional performanceThe ARCTIC MX-4 is composed of carbon micro-particles that lead to an extremely high thermal conductivity. It guarantees quick and efficient dissipation of heat from the CPU or GPU.Safe and easy applicationThe ARCTIC MX-4 is a metal-free and non-electrically conductive compound.That eliminates the risks of short circuit and provides protection to your computer. Also the application is very easy as the consistency is just ideal for application on chips.Great valueWith the competitive pricing of the ARCTIC MX-4, the performance of the ARCTIC MX-4 is the best thermal compound on the market.Content 4 gramme

The Eisblock XPX Aurora Edge is a powerful CPU cooler that shows its strength especially on multi-core processors with 4, 6, 8, 12 and more CPU cores. The total area of the cooling channels on the CPU cooler base is 34 x 32 mm. This means that the Eisblock XPX Aurora Edge cooler also copes with large CPU DIEs. Performance in overflow! The Eisblock XPX Aurora Edge has a special injection technology that was developed and patented by Alphacool itself. The so-called "ramp system" is located in front of the nozzle plate and ensures an even flow of water within the cooler. The water is pressed through the nozzle plate in a controlled manner and distributed evenly over the cooler base. The radiator bottom itself has 81 cooling fins with a fin structure of only 0.2 mm per fin. In this way, the largest possible surface area has been created in the available space in order to dissipate the CPU's waste heat to the water as quickly as possible. Lighting Behind the Alpahcool logo, 2 digitally addressable 5V RGB LEDs are installed, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the digital RGB lighting, the enclosed adapter must be connected to the 3-pin female connector and connected to a digital RGB controller or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Discreet appearance The matt finish gives the cooler, which is made entirely of brass (except for the cooler bottom), a noble look. This makes it interesting for users who prefer a discreet appearance and want to do without a complex aRGB illumination. Thermal grease The thermal paste included in the delivery is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive thermal grease is particularly suitable for high contact pressures, but can still be processed perfectly due to its viscosity of 850000 TF. Compatibility: Compatibility Intel: LGA 115x / 1200 / 1700 / 2066 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data L x W x H 70 x 70 x 32,5mm Material cooler nickel plated copper Material bottom part brass Material top brass Number of aRGB LEDs 2 Threads 2 x G1/4“ Power supply Digital aRGB 3-Pin 5V Pressure tested 0,8 bar Max working temperature 60°C Net weight 694g Color chrome

Thermal Grease, OR-MX2-AC-01

MANHATTAN CPU Thermal Grease 1.5g 0.5oz

Ultra compact and low noise cooler for Intel Core 2 Duo and Core i3, i5 CPU’s. The low profile design with embedded fan makes it a perfect solution for Thin mini-ITX, HTPC and SFF systems.Aluminium heatsink and twin ball bearing fan ensure high efficiency and long life. High engineered multi directional aluminium heatsink maximises heat dissipation and PWM fan provides optimal CPU, motherboard and VRM cooling with minimal noise levels.Pre-applied spring-loaded screws and motherboard backplate guarantee safe retention. Pre-applied high performance thermal compound ensures clean and easy installation.- Hi-engineered aluminium heatsink.- Multi-directional fins for maximum system cooling.- Embedded 8cm PWM fan with long life twin ball bearing.- Pre-applied spring-loaded screws and motherboard backplate.- Dual mounting for Intel LGA775, LGA1150, LGA1155 and LGA1156 platforms.- High performance thermal interface is pre-applied.- Total height only 21mm.SobilikProtsessorTüüpJahutiVentilaatori läbimõõt7,5 cmToetatud protsessoripesadLGA 1156 (Socket H),LGA 1155 (Socket H2),LGA 1150 (Socket H3)Ühilduvad protsessoriseeriadCore 2 Duo,Core i3,Core i5Pöörlemiskiirus (min)600 RPMPöörlemiskiirus (max)3000 RPMMüratase (suur kiirus)30,75 dBMaksimaalne õhuvool23,45 cfmMaksimaalne õhusurve1,81 mmH2OKeskmine tõrkeintervall (MTBF)50000 hMaterjalAlumiiniumPinge12Laius85,2 mmSügavus87,2 mmKõrgus21 mmKaal154 gLaagertehnoloogiaTwin BallPistmik(ud)4-pin

Water block dimention: 80 x 80 x 45 mm Block Material (CPU Plate): Copper Radiator Dimension: 121 x 272 x 27 mm Radiator Material: Aluminum Tube: Sleeved Rubber tube Tube Length: 380 mm Fan: ROG Designed ARGB Radiator Fan - Size: 2 x Fan Slots (120mm) - Dimension: 120 x 120 x 25 mm - Speed: 800 - 2500 RPM +/- 10% - Static Pressure: 5.0 mmH2O - Air Flow: 80.95 CFM / 137.5 m3h - Noise: 37.6 dB(A) - Control Mode: PWM/ DC AMD: AM4 Package Content: 1 x Liquid Cooler (pre-applied thermal compound) 2 x 120 mm ARGB Radiator Fan 1 x Accessory Pack of Screws and Brackets 1 x Quick Start Guide 1 x USB cable for software control 1 x 1-to-2 Fan Splitter Cable 1 x 1 to 4 ARGB spliter cable

Performance Thermal Paste, CT-9010001-WW

The Alphacool Subzero Thermal Grease is intended for all users who want to achieve optimum performance with their system. This electrically non-conductive thermal paste suitable for high contact pressures is an excellent choice when performance and ease of application are required.ApplicationSubzero Thermal Grease can be optimally applied due to its high viscosity. For perfect application of the thermal paste, a plastic spatula (included in delivery) or a comparable tool should be used.PropertiesAlphacool's Subzero Thermal Grease has a high thermal conductivity, making it one of the best performing thermal pastes on the market. Only thermal pastes made from liquid metal offer better thermal conductivity. Subzero Thermal Grease is delivered in an applicator with a screw cap. The amount of thermal grease is sufficient for several applications and can be stored in the applicator to protect it from drying out. A plastic spatula is included for perfect application of the thermal paste. Subzero Thermal Grease is non-conductive and non-caustic. If a small amount of paste is spilled during application, damage to the hardware is highly unlikely. Technical dataColor AppearancegrayViscosity (mPa. s)3,000,000Specific Gravity (g/cm3)2,7Thermal Resistance (Degree Celcius*cm2/w) 60Psi0,05Dielectric Constant14,5 at 1MHzVolatile matter (%), 120 Degree Celcius @96hrs0,18Out Gasing (%), 200 Degree Celcius @96hrs0,01Temperature Stability (Degree Celcius)-50 ~ 200Shelf Life2 yearsProduct Featureseasy to work with, non-caustic, anti-oxidation, not easily solidifying

spatula for thermal grase 3pcs

Noise: 0 Weight: 1.5

With its 240 mm radiator, the S80 RGB is a compact all-in-one water-cooling system that provides efficient cooling for all CPUs. Apart from providing visual highlights in 16.7 million colors, the addressable RGB PWM fans also ensure good cooling performance with a speed of up to 2,000 rpm. Installation is easy, thanks to the flexible, textile-braided tubing and the supplied mounting brackets.Full Fan Control The two RGB PWM fans that belong to the S80 RGB's 240 mm radiator not only have fully addressable RGB illumination, but their speed can also be controlled within a range from 600 rpm to 2,000 rpm. And for easy cable management, the fans can be daisy chained. Also the pump has PWM control for optimal performance and low noise volume.Best Possible Heat Dissipation Like the fans, the water block and pump unit is also equipped with RGB illumination and presents itself with a chic infinity mirror effect. The copper plate and the supplied high-quality DOWSIL™ thermal paste ensure the best possible heat dissipation.Compatible with All CPUs. Thanks to the two enclosed mounting brackets for CPUs of all manufacturers, this all-in-one water-cooling solution is optimally prepared for direct use in the PC case.Flexible and Easy to Install Via the flexible tubing, installation in the PC case is as uncomplicated as possible. The tubing is textile braided for optimal protection against scratches.Rotatable Sharkoon Logo In order to ensure that the Sharkoon logo is always horizontal, it can be easily rotated to the desired position on the water block and pump unit. General CPU Socket Compatibility: Intel® Socket LGA 115X / 1366 / 1200 / 1700 / 2011 / 2011-3 / 2066 (Core i3 / i5 / i7 / i9 ) AMD® TR4 / TRX4 / AM5 / AM4 / AM2 / FM2 / FM1 / AM3+ / AM2+ / AM2 Weight: 1.48 kg Water Block & Pump Dimensions: Ø 71.5 mm x 52.3 mm Weight: 0.89 kg Cold Plate Material: Copper Pump Speed: 1,600 ~ 3,200 rpm ± 6 % Rated Voltage (Pump): 12 V Rated Voltage (LEDs): 5 V Rated Current (Pump): 0.35 A Rated Current (LEDs): 0.8 A Rated Power (Pump): 4.2 W Rated Power (LEDs): 4.0 W Pump Connector: 4-Pin PWM LED Connector: 4-Pin (5V-D-coded-G) Radiator Type: Brazed Radiator Dimensions (L x W x H): 272 x 121 x 27.5 mm Material: Aluminium Alloy Tubing Length: 400 mm Fans Number of Fans: 2 Dimensions (L x W x H): 120 x 120 x 25 mm Fan Speed: 600 ~ 2,000 rpm ± 10 % Max. Airflow: 131.93 m³/h Max. Air Pressure: 2.90 mmH₂O Max. Noise Level: 35 dB(A) Illumination: 12x Addressable RGB LED Rated Voltage (Fan): 12 V Rated Voltage (LEDs): 5 V

Socket compatibility: Intel LGA2066, LGA2011-0 & LGA2011-3 (Square ILM), LGA1700 (included since Q4 2021, older coolers require NM-i17xx-MP83), LGA1200, LGA1156, LGA1155, LGA1151, LGA1150 AMD AM4, AM5 Height (without fan): 158 mm Width (without fan): 154 mm Depth (without fan): 152 mm Weight (without fan): 1180 g Material: Copper (base and heat-pipes) aluminium (cooling fins) soldered joints nickel plating NSPR: 42 Max. TDP: see NSPR Fan compatibility: 120x120x25 Scope of delivery: NH-P1 heatsink SecuFirm2+™ multi-socket mounting system NT-H2 high-grade thermal compound NA-CW1 cleaning wipe NM-SD1 screwdriver Fan clips for optional 120mm fan Noctua Metal Case-Badge

Thermal grease, 1ml/2.6g

This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for EVGA® FTW3 RTX 3070 graphics cards based on the latest NVIDIA® Ampere™ architecture. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator. An EK Water Block for FTW3 RTX 3070 EK-Quantum Vector FTW3 3070 D-RGB water block is compatible with FTW3 RTX 3070 graphics cards. The Vector water block actively cools the GPU, VRAM, power stages, and chokes in the VRM (voltage regulation module). These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The fin array is populated by 28 microfins with 0.6mm wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards. The base of the block is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of durable POM acetal. These 2nd generation Vector GPU water blocks also feature Acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector FTW3 RTX 3070 D-RGB water block The aesthetic corner end-piece is housing the addressable D-RGB LEDs. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the EK-Quantum Vector FTW3 3070 water block EK recommends the purchase of a retention backplate, especially for the 3070 models of graphics cards. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, and backside of the printed circuit board VRM section. Technical Specification Dimensions: (LxHxW) - 314x155x21mm Enclosed EK-Quantum Vector FTW3 RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)

1,5 Gramm DM9-Wärmeleitpaste von DeepCool, enorm gute Wärmeleitfähigkeit

Cooler Master has built upon the classic MasterLiquid L Series to present a redesigned and improved release of the MasterLiquid 360L Core ARGB White. Featuring new design elements that bring a classic minimalist look to the series, the MasterLiquid 360L Core ARGB White represents Cooler Masters ongoing innovative spirit.GEN S DUAL CHAMBER PUMPRedesigned copper base targets heat spots with precision along with boosted water flow and pressure for enhanced cooling performance.EXPANDED RADIATOR SURFACEExpanded radiator fin surface accelerates heat dissipation for superior cooling.120MM ARGB FANSUpgraded 120mm ARGB fans deliver optimal radiator performance and versatile lighting options.CRYOFUZE THERMAL PASTEIncludes premium CryoFuze thermal paste for exceptional heat conductivity.CLEAN CLASSIC DESIGNClean minimalist design brings a refreshed modern facelift to the pump cover.

CPU Cooler ACC Thermal Paste