Product Details: Thermal Grizzly - Pro TG Putty Pro is a non-electrically conductive alternative to traditional thermal pads. This easy-to-apply and flexible material serves as a "gap filler," effectively compensating for height differences. It is an ideal replacement for thermal pads on graphics cards, where different pad thicknesses are typically used. When replacing pads or upgrading to a GPU water block, multiple thermal pad sizes are usually required. TG Putty can be applied using the included spatulas or by hand (gloves recommended). The spatula allows for smooth, even application over larger areas, while alternatively, the putty can be shaped into small beads that precisely fit components such as VRAM or SMDs. TG Putty can compensate for height differences ranging from 0.2 mm to 3.0 mm. Available Variants:TG Putty comes in three versions, each offering different levels of thermal conductivity: TG Putty Basic – Medium thermal conductivity TG Putty Advance – Good thermal conductivity TG Putty Pro – High thermal conductivity For upgrading a smaller graphics card without an active backplate (e.g., GeForce GTX 1060), a single 30g jar of TG Putty is usually sufficient. For larger models, such as the GeForce RTX 4090, one 30g jar typically covers the memory (VRAM) and voltage regulators (VRM) on the front side. Since high-end graphics cards often have a uniform gap between the PCB and the backplate, fully filling this space may require two 30g jars. Important Notes: TG Putty is not suitable for direct application on processors (IHS or Direct Die) or GPU chips. Before applying, ensure that the target surface is thoroughly cleaned and degreased using TG Cleaning Wipes or standard isopropanol. Package Contents: 1x TG Putty Pro 3x Spatulas
Tootekood: CR-1400E ARGB WHITEGTIN: 6970620554815Jahutid ja lisad
Single tower cooler with cooling performance of up to 160 W TDP Four 6-mm heatpipes for rapid heat dissipation A 92 mm ARGB fan with PWM connector and hydraulic bearing Synchronizable, customizable ARGB lighting for your build Compact dimensions: 92 mm (L) x 66 mm (W) x 127 mm (H) High-performance thermal paste included High compatibility with AMD and Intel processors Innovative mounting system for easy installation The Jonsbo CR-1400E ARGB CPU cooler for Intel and AMD With the CR-1400E ARGB, you get a stylish and high-performance CPU cooler designed for ambitious gamers and overclockers. Its compact single tower design and four robust 6-mm heatpipes ensure that the heat from your CPU is quickly dissipated—even at a D-TDP of up to 160W. Thanks to the integrated ARGB lighting, you can also create visual highlights in your build. Jonsbo CR-1400E ARGB: Cooling performance with style The CR-1400E ARGB combines impressive cooling performance with a modern look. The 92 mm ARGB fan automatically adjusts to your CPU temperature thanks to the PWM 4-pin connector and reaches speeds from 800 to 2200 RPM. This delivers a maximum airflow of up to 64.9 m³/h, with air pressure up to 2.0 mmH₂O—perfect for effective yet quiet operation. Fan and performance data The powerful 92 mm ARGB fan, equipped with a durable hydraulic bearing, dynamically regulates its speed to ensure optimal airflow. With a maximum noise level of 33.8 dB(A), you stay in a quiet environment even during intense gaming sessions and overclocking scenarios. The precise adjustment via the PWM connector guarantees that the fan always perfectly adapts to your needs. Construction and accessories Four firmly integrated 6-mm heatpipes efficiently transfer your CPU’s heat to the compact aluminum heatsink, which ensures optimal airflow. The modern design of the CR-1400E ARGB not only enables perfect installation but also lets you express your personal style—thanks to the synchronizable ARGB lighting. Of course, high-quality thermal paste is also included for an excellent thermal connection between your CPU and the cooler.
Made from acrylic, the TG Scraper features a narrow tip specifically developed to remove, for example, silicone adhesive from the package (PCB) of a delidded processor or residual indium solder from the CPU dies. The ergonomic design ensures a firm and secure grip during use. Note: Careful and precise handling of the TG Scraper is essential to avoid damaging small electronic components on the CPU package or the dies. When removing indium solder from the die(s), it is recommended to first gently scrape the surface with the TG Scraper, then clean remaining solder residue from the die surfaces using liquid metal. Scope of Delivery: 3× TG Scraper
Tootekood: NT-H1 3.5G AM5 EDITIONGTIN: 9010018201505Jahutid ja lisad
Thermal paste for copper and aluminum coolers, for up to 20 applications, high maximum operating temperature, service life of up to 5 years, including Thermal Paste Guard for AM5 CPUs
The CORSAIR XTM60 thermal paste is a solution designed to enhance the cooling efficiency of your system. This thermal compound is ideal for enthusiasts looking to improve their systems, providing heat conductivity between the CPU or GPU and their coolers. Its formulation supports a broad operating temperature range, from -20°C up to 120°C, ensuring reliability and performance stability under various conditions. The package includes an applicator, simplifying the application process and ensuring an even spread for optimal thermal interface. Whether you're a gamer, a content creator, or seeking to improve your system's cooling performance, the CORSAIR XTM60 thermal paste is an excellent choice.
Excellent thermal conductivity of 12.8 W/m*K Electrically non-conductive for maximum safety Durable and suitable for long-term applications Easy to apply for both professionals and beginners Works across a wide temperature range (-50 °C to 250 °C) Exceptional heat transfer capabilities With an impressive thermal conductivity of 12.8 W/m*K, the UMBRA PRO TP-1 quickly and efficiently transfers heat away from your CPU or GPU. This reduces the risk of overheating, improves stability, and extends your hardware’s lifespan. Maximum safety with electrical non-conductivity Electrically non-conductive and specially designed to prevent short circuits—so you can upgrade or maintain your hardware with confidence. Extreme temperature range for versatile use Whether for high-performance gaming or workstation tasks, the UMBRA PRO TP-1 remains reliable and effective in temperatures ranging from -50 °C to 250 °C. Even under heavy loads, it retains its properties for years. Long-lasting and low-maintenance Its excellent durability means you don’t have to replace the paste frequently. It stays stable and efficient over long periods, allowing you to fully focus on your work or gaming. Easy application The UMBRA PRO TP-1 features a consistency optimized for easy and even spreading—no special experience required. For added convenience, a spatula and cleaning cloth are included in the package.
Excellent thermal conductivity of 12.8 W/m*K Electrically non-conductive for maximum safety Durable and suitable for long-term applications Easy to apply for both professionals and beginners Works within a wide temperature range (-50°C to 250°C) Exceptional thermal conductivity With an impressive thermal conductivity of 12.8 W/m*K, the UMBRA PRO TP-1 quickly and efficiently transfers heat away from your CPU or GPU. This reduces the risk of overheating, improves system stability, and extends your hardware’s lifespan. Maximum safety through electrical non-conductivity Electrically non-conductive and specifically designed to prevent short circuits—so you can upgrade or maintain your hardware with complete confidence. Extreme temperature range for versatile applications Whether for high-performance gaming or workstation use, the UMBRA PRO TP-1 remains reliable and effective in a temperature range from -50°C to 250°C. Even under intense loads, it retains its properties over years of use. Long-lasting and low maintenance Its excellent durability ensures you don’t need to constantly replace the paste. It remains stable and efficient for extended periods, allowing you to fully focus on your work or gaming. Easy application The consistency of the UMBRA PRO TP-1 is optimized for easy and even spreading—no special knowledge required. For added convenience, a spatula and cleaning cloth are included.
Single tower cooler with up to 220 W TDP cooling capacity Six 6-mm heatpipes and optimized cooling fins One 120-mm PWM fan with dynamic speed control Asymmetrical design for high RAM compatibility High-performance thermal paste included High compatibility with AMD and Intel processors Innovative mounting system for easy installation The Jonsbo CR-1000MAX CPU cooler for Intel and AMD With the CR-1000MAX, you’ll bring home a true performer in cooling—ideal for demanding and intensive gaming sessions. This single tower cooler offers you a large cooling surface with aerodynamically optimized fins that effectively dissipate the heat from your processor. Together with the six 6-mm heatpipes and the included 120 mm PWM fan, you’ll achieve outstanding cooling performance. Thanks to the innovative mounting system, installation in systems with tall RAM modules is effortless. Jonsbo CR-1000MAX Standard: Ice cold and whisper quiet The perfectly matched cooling towers of the CR-1000MAX Standard are tailored exactly to your needs. The aerodynamically optimized fins ensure particularly quiet operation—perfect if you don’t want to sacrifice power even in quiet environments. The 120-mm PWM fan with its hydrodynamic bearing precisely controls speed between 600 and 1,500 RPMs and keeps noise levels minimal at full load, around 22-28 dB(A). Fan and performance data You connect the integrated 120-mm PWM fan directly to the PWM header on your motherboard. Thanks to its dynamic speed control, it automatically adapts to the CPU temperature and delivers a maximum airflow of around 94 m³/h. This means heat is efficiently dissipated even under maximum load—just what you expect from a high-end cooler. Construction and accessories Six heatpipes integrated into the copper base quickly and efficiently conduct your processor’s heat into the heatsink. The large aluminum heatsink with its aerodynamically optimized fins maximizes the cooling surface and ensures optimal airflow in your system. The asymmetrical design of the cooling tower also provides ample space for densely packed RAM modules. High-quality thermal paste is also included, ensuring perfect thermal connection between your CPU and the cooler.
Tootekood: CR-1000 MAX ARGB WHITEGTIN: 6970620554792Jahutid ja lisad
Single tower cooler with up to 220 W TDP cooling capacity Six 6-mm heatpipes and optimized cooling fins A 120-mm PWM fan with dynamic speed control Asymmetric design for high RAM compatibility High-performance thermal paste included Highly compatible with AMD and Intel processors Innovative mounting system for easy installation Integrated ARGB lighting on fan and cooler The Jonsbo CR-1000MAX CPU cooler for Intel and AMD With the CR-1000MAX, you're getting a true performer in cooling – ideal for demanding and intensive gaming sessions. This single tower cooler offers you a large heatsink with aerodynamically optimized fins that effectively dissipate the heat from your processor. Together with the six 6-mm heatpipes and the included 120 mm PWM fan, you achieve excellent cooling performance. Thanks to the innovative mounting system, installation in systems with tall RAM modules is very easy. Jonsbo CR-1000MAX Standard: Ice cold and whisper quiet The perfectly tuned cooling towers of the CR-1000MAX Standard are tailored exactly to your needs. The aerodynamically optimized fins ensure especially quiet operation – perfect if you don’t want to sacrifice performance, even in quiet environments. The 120-mm PWM fan with its hydrodynamic bearing precisely adjusts speed between 600 and 1,500 rpm, ensuring a minimal noise level of about 22–28 dB(A) even at full load. Fan and performance data You can connect the integrated 120-mm PWM ARGB fan directly to your motherboard via a PWM connection. Thanks to its dynamic speed control, it automatically adapts to the CPU temperature and delivers a maximum airflow of about 94 m³/h. This means heat is effectively dissipated even under the heaviest loads – exactly what you expect from a high-end cooler. Design and accessories Six heatpipes integrated into the copper base quickly and efficiently transfer the heat from your processor into the heatsink. The large aluminum heatsink with its aerodynamically optimized fins maximizes the cooling surface and ensures optimal airflow in your system. The asymmetric tower design also provides enough space for RAM modules. High-quality thermal paste is also included, ensuring perfect thermal contact between your CPU and the cooler.
GELID LIQUID 360AM5 Compatible High Quality Sleeve Tubing Extreme-Cooling Performance Temperature Display Premium Class Radiator Infinite Mirror 750 – 1800 RPM Noiseless Motor Includes: GC-4 – The State of Art Thermal Compound
GELID LIQUID 240 AM5 Compatible High Quality Sleeve Tubing Extreme-Cooling Performance Temperature Display Premium Class Radiator Infinite Mirror 750 – 1800 RPM Noiseless Motor Includes: GC-4 – The State of Art Thermal Compound
Tootekood: CR-1400E ARGB BLACKGTIN: 6970620554808Jahutid ja lisad
Single tower cooler with up to 160 W TDP cooling performance Four 6 mm heatpipes for rapid heat dissipation A 92 mm ARGB fan with PWM connector and hydraulic bearing Synchronizable, customizable ARGB lighting for your build Compact dimensions: 92 mm (L) x 66 mm (W) x 127 mm (H) High-performance thermal paste included High compatibility with AMD and Intel processors Innovative mounting system for easy installation The Jonsbo CR-1400E ARGB CPU cooler for Intel and AMD With the CR-1400E ARGB, you get a stylish and powerful CPU cooler designed for ambitious gamers and overclockers. Its compact single tower design and four sturdy 6 mm heatpipes ensure your CPU's heat is quickly dissipated – supporting a D-TDP of up to 160 W. Thanks to the integrated ARGB lighting, you can also add visual highlights to your build. Jonsbo CR-1400E ARGB: Cooling performance with style The CR-1400E ARGB combines impressive cooling performance with a modern look. The 92 mm ARGB fan, thanks to its 4-pin PWM connection, automatically adjusts to your CPU temperature and reaches speeds of 800 to 2200 rpm. This enables a maximum airflow of up to 64.9 m³/h, with an air pressure of up to 2.0 mmH₂O – perfect for efficient yet quiet operation. Fan and performance data The powerful 92 mm ARGB fan, equipped with a durable hydraulic bearing, dynamically adjusts its speed ensuring optimal airflow. With a maximum noise level of 33.8 dB(A), you can enjoy quiet operation even during intense gaming sessions and overclocking scenarios. The precise control via the PWM connector guarantees the fan always adapts ideally to your needs. Design and accessories Four firmly integrated 6 mm heatpipes efficiently transfer heat from your CPU to the compact aluminum heatsink, which ensures optimal air circulation. The modern design of the CR-1400E ARGB not only allows for perfect installation, but also for your own personal style – thanks to synchronizable ARGB lighting. Of course, high-quality thermal paste is also included, ensuring excellent thermal conductivity between your CPU and the cooler.
Tootekood: CR-1000 MAX ARGB BLACKGTIN: 6970620554785Jahutid ja lisad
Single tower cooler with up to 220 W TDP cooling capacity Six 6-mm heat pipes and optimized cooling fins One 120 mm PWM fan with dynamic speed control Asymmetric design for high RAM compatibility High-performance thermal paste included High compatibility with processors from AMD and Intel Innovative mounting system for easy installation Integrated ARGB lighting on fan and cooler The Jonsbo CR-1000MAX CPU cooler for Intel and AMD With the CR-1000MAX, you’re getting a true performer when it comes to cooling—ideal for demanding and intensive gaming sessions. This single tower cooler provides a large heatsink with aerodynamically optimized fins that efficiently dissipate your processor’s heat. Together with the six 6-mm heat pipes and included 120 mm PWM fan, you achieve outstanding cooling performance. Thanks to the innovative mounting system, installation in systems with tall RAM modules is a breeze. Jonsbo CR-1000MAX Standard: Ice cold and whisper-quiet The perfectly tuned cooling towers of the CR-1000MAX Standard are tailored precisely to your needs. The aerodynamically optimized fins ensure especially quiet operation—perfect if you want power even in quiet environments. The 120 mm PWM fan with its hydrodynamic bearing precisely regulates speed between 600 and 1,500 RPM and ensures a minimal noise level of about 22-28 dB(A) even under full load. Fan and performance data The integrated 120 mm PWM ARGB fan connects directly to your motherboard via a PWM header. Thanks to dynamic speed control, it automatically adapts to the CPU temperature and provides a maximum airflow of about 94 m³/h. This efficiently dissipates heat even under the highest loads—just what you expect from a high-end cooler. Design and accessories Six heat pipes integrated into the copper base quickly and efficiently transfer your processor’s heat to the heatsink. The large aluminum heatsink with its aerodynamically optimized fins maximizes the cooling surface and ensures optimal air circulation in your system. The asymmetric design of the cooling tower also provides enough space for densely packed RAM modules. High-quality thermal paste is included, ensuring perfect thermal contact between your CPU and the cooler.
With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel.Aluminium RadiatorCompared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU.Core fanThe fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system.Cooler & PumpAs with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored.Hoses & ConnectionsThe FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case.Illumination12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.Thermal compoundThe thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility:AMD: AM4 / AM5Intel: LGA 1150 / LGA 1200 / LGA 1700 / LGA 1851 / LGA 2066 Technical data radiatorL x W x H460 x 140 x 38mmMaterial cooling fins, channels & prechamber3003 AluminiumMaterial outer housing & threads3003 AluminiumFins per Inch20Fan size140mmFan slots3 one-sided / 6 double-sidedColorblackTechnical data fansL x W x H140 x 140 x 25mmBearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.26 (Max. 0.3) ARated Power3.12 (Max. 3.6) WRated Speed0 - 2000rpm/min (±10%)Max. Air Flow92.3CFMMax.Static Pressure2.53mm-H2ONoise level (rated voltage, mute room, distance 1m)34.3 (Max. 36) dBAMTBF50000hrs at 25°CSpeed Control ModePWMConnection & control4-pin PWM (cable 40cm)Auto-RestartyesTachometer OutputyesColorblackTechnical data cooler & pumpL x W x H70,2 x 70,2 x 46mmMaterial cooler bottomcopperMaterial pump housingSynthetic material (ABS+PC)Fin structure cooler bottom0,1 x 0,1mmMaterial pump bearing & shaftceramicsStarting voltage> DC 6VRated power7.1WNoise level35DbRated Current0.59A (±10% MAX)Speed2500~3500 (±10% RPM)Power supply Digital aRGB3-pin 5V (male & female, cable length 30cm)Number of aRGB LEDs12Power supply pump4-Pin JST (Kabellänge 30cm)Technical data tubesMaterialFEP, black with weave coverLength400mmWarranty: 3 years???? Warranty Terms
The Eisblock XPX Aurora Edge is a powerful CPU cooler that shows its strength especially on multi-core processors with 4, 6, 8, 12 and more CPU cores. The total area of the cooling channels on the CPU cooler base is 34 x 32 mm. This means that the Eisblock XPX Aurora Edge cooler also copes with large CPU DIEs. Performance in overflow! The Eisblock XPX Aurora Edge has a special injection technology that was developed and patented by Alphacool itself. The so-called "ramp system" is located in front of the nozzle plate and ensures an even flow of water within the cooler. The water is pressed through the nozzle plate in a controlled manner and distributed evenly over the cooler base. The radiator bottom itself has 81 cooling fins with a fin structure of only 0.2 mm per fin. In this way, the largest possible surface area has been created in the available space in order to dissipate the CPU's waste heat to the water as quickly as possible. Lighting Behind the Alpahcool logo, 2 digitally addressable 5V RGB LEDs are installed, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the digital RGB lighting, the enclosed adapter must be connected to the 3-pin female connector and connected to a digital RGB controller or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Discreet appearance The matt finish gives the cooler, which is made entirely of brass (except for the cooler bottom), a noble look. This makes it interesting for users who prefer a discreet appearance and want to do without a complex aRGB illumination. Thermal grease The thermal paste included in the delivery is Alphacool's Subzero with a thermal conductivity of 16 W/mk. The electrically non-conductive thermal grease is particularly suitable for high contact pressures, but can still be processed perfectly due to its viscosity of 850000 TF. Compatibility: Compatibility Intel: LGA 115x / 1200 / 1700 / 2066 AMD Compatibility: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data L x W x H 70 x 70 x 32,5mm Material cooler nickel plated copper Material bottom part brass Material top brass Number of aRGB LEDs 2 Threads 2 x G1/4“ Power supply Digital aRGB 3-Pin 5V Pressure tested 0,8 bar Max working temperature 60°C Net weight 694g Color chrome
The ARCTIC MX-4 is a new thermal compound that guarantees exceptional heat dissipation from components and maintains the needed stability to push your computer system to its maximum. The ARCTIC MX-4 continues to be overclocker’s ultimate choice when choosing thermal compound.Content 20 gramme
Efficient Thermal ConductivityThe Thermal Pad based on silicone and a special filler outperforms generic and performance pads by far.Filling the GapsDue to its low hardness and great compressibility, the thermal pad works as the perfect gap filler and bridges uneven surface and gaps without any problems.Easy to ApplyInstalling the ARCTIC Thermal Pad is child's play; perfect for beginners..Safe HandlingThe Pad does not contain any metallic particles, is electrically isolating and not capacitive. The handling is safe as contact with any electrical traces would not result in damage of any sort.Toote värvSinineMaterjalSilikoonPakendi laius195 mmPakendi kõrgus210 mmPakendi kaal45 gLaius145 mmSügavus0,5 mmKõrgus145 mmKaal41 g
Ultra compact and low noise cooler for Intel Core 2 Duo and Core i3, i5 CPU’s. The low profile design with embedded fan makes it a perfect solution for Thin mini-ITX, HTPC and SFF systems.Aluminium heatsink and twin ball bearing fan ensure high efficiency and long life. High engineered multi directional aluminium heatsink maximises heat dissipation and PWM fan provides optimal CPU, motherboard and VRM cooling with minimal noise levels.Pre-applied spring-loaded screws and motherboard backplate guarantee safe retention. Pre-applied high performance thermal compound ensures clean and easy installation.- Hi-engineered aluminium heatsink.- Multi-directional fins for maximum system cooling.- Embedded 8cm PWM fan with long life twin ball bearing.- Pre-applied spring-loaded screws and motherboard backplate.- Dual mounting for Intel LGA775, LGA1150, LGA1155 and LGA1156 platforms.- High performance thermal interface is pre-applied.- Total height only 21mm.SobilikProtsessorTüüpJahutiVentilaatori läbimõõt7,5 cmToetatud protsessoripesadLGA 1156 (Socket H),LGA 1155 (Socket H2),LGA 1150 (Socket H3)Ühilduvad protsessoriseeriadCore 2 Duo,Core i3,Core i5Pöörlemiskiirus (min)600 RPMPöörlemiskiirus (max)3000 RPMMüratase (suur kiirus)30,75 dBMaksimaalne õhuvool23,45 cfmMaksimaalne õhusurve1,81 mmH2OKeskmine tõrkeintervall (MTBF)50000 hMaterjalAlumiiniumPinge12Laius85,2 mmSügavus87,2 mmKõrgus21 mmKaal154 gLaagertehnoloogiaTwin BallPistmik(ud)4-pin
The Rise Ultra Soft are Alphacool's performance oriented solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Rise Ultra Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance.Better than standard thermal pads?The material of the Rise Ultra Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Rise Ultra Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component.But that is not the only advantage!The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Rise Ultra Soft thermal pads. They can be used for a much longer period of time without significantly losing performance.Cutting to size? No problem!When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray.The Alphacool Rise Ultra Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical dataDimensions (L x W x H)100 x 100 x 0,5mmSpecific Gravitiy ASTM D7923,3 g/ccThermal Conductivity ASTM D54707.0 W/mKHardness ASTM 224025 Shore OOUseful Temperature-40 to +160 °CVolume Resistivity ASTM D2575,2x1013 Ohm-mDielectric Constant ASTM D1504,5 MHzDielectric Breakdown Voltage ASTM D1495,5 kV/mmFlame Rating UL E331100UL94 V0Weight18 gColorGrey
The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 100 x 100 x 1 mm Colour grey Specific Gravitiy ASTM D792 3,4 g/cc Thermal Conductivity ASTM D5470 11.0 W/mK Hardness ASTM 2240 72 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 7,2 MHz Dielectric Breakdown Voltage ASTM D149 14 kV/mm Flame Rating UL 94 V-0 Weight 40 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 11W/mk 100x100x1mm
The Apex Soft thermal pads are Alphacool’s high-end solution in the field of thermal interface materials. Thanks to their outstanding properties, they can almost be compared to thermal paste. Apex Soft thermal pads conform much better to components, resulting in a significant improvement in cooling performance.The material used in Apex Soft pads behaves similarly to thermal paste. Its consistency prevents higher-standing components, such as voltage regulators or VRAMs, from being subjected to excessive mounting pressure from the cooler — which, in the worst case, could lead to PCB bending. Apex Soft pads fill surface irregularities more effectively and conform more closely to component shapes, which significantly enhances thermal transfer between the cooler and the hardware.The special material also does not dry out over time. Standard thermal pads often begin to bleed silicone over time, making them hard and drastically reducing their performance. This is not the case with Apex Soft pads. They can be used for much longer periods without a noticeable drop in performance.When cutting the pads to size, it’s important to leave the protective film on. This allows the pads to be easily cut with scissors — just like cutting paper. The cut edges remain clean and do not fray.Alphacool’s Apex Soft thermal pads offer significantly better performance than conventional thermal pads in many aspects and are the perfect replacement for old or underperforming pads. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,0mmSpecific gravity (ASTM D792)3.2 g/ccThermal Conductivity14.0 W/mKHardness (ASTM D2240)80 Shore OOWorking temperature-40 to +150 °CVolume Resistance (ASTM D257)1.0x10^11 Ohm-mDielectric Breakdown Voltage (ASTM D150)6.8 MHzDensity (ASTM D792)3.6 g/cm³ (±10%)Dielectric breakdown (ASTM D149)13 kV/mmFlame Rating (UL 94)V-0Colorgrey
The Apex Soft are Alphacool's high-end solution in the range of thermal pads. Due to their outstanding properties, they can almost be compared to a thermal paste. The Apex Soft thermal pads nestle much better to components, which contributes to a significant improvement in cooling performance. Better than standard thermal pads? The material of the Apex Soft heat thermal pads acts similar to thermal paste. The consistency of the pads prevents the highest components, such as voltage converters or VRMs, from being subjected to increased contact pressure from the cooler. In extreme cases, this pressure can cause PCBs to bend. The Apex Soft Pads fill unevenness much better, nestle better against the components and thus significantly increase the heat transfer between the cooler and the component. But that is not the only advantage! The special material also cannot dry out. Usually, the silicone of heat-conducting pads bleeds out over time. This makes them go hard and the performance of the pads drops rapidly after a certain point. This is not the case with the Apex Soft thermal pads. They can be used for a much longer period of time without significantly losing performance. Cutting to size? No problem! When cutting the heat-conducting pads to size, it is essential to leave the foil on the pads. This makes it easy to cut the pads to size with scissors. This is just as easy as cutting paper. The cut edges remain perfectly clean and do not fray. The Alphacool Apex Soft thermal pads offer better performance than standard thermal pads in many respects and are a perfect replacement for old or underperforming pads. Technical data L x W x H 120 x 20 x 1 mm Colour Grey Specific Gravitiy ASTM D792 3,2 g/cc Thermal Conductivity ASTM D5470 14.0 W/mK Hardness ASTM 2240 80 Shore OO Useful Temperature -40 to +150 °C Volume Resistivity ASTM D257 1.0x1011 Ohm-m Dielectric Constant ASTM D150 6,8 MHz Dielectric Breakdown Voltage ASTM D149 13 kV/mm Flame Rating UL 94 V-0 Weight 20 g Download Datasheet PDF: Alphacool Apex Soft Thermal Pad 14W/mk 2x 120x20x1mm
