Finding a quiet and efficient cooling fan is the ultimate goal for every enthusiast. The FF81 is a fan grille designed for easy installation with any 80mm fan. The honeycomb pattern on the grille not only reduces wind shear noise but also channels the airflow into more focused beam. Its integrated filter also provides reduced dust buildup to extend the life cycle of components. All in all, the FF81 is an excellent upgrade for any 80mm fans in your system.- Honeycomb grille increases airflow focus- Integrated filter provides class leading dust reduction.- Highly compatibility with all 80mm fanTechnical detailsType otherMaterial ABS syntheticsNumber of fans supported 1Colour of product BlackFans diameters supported 80 mmWeight & dimensionsWidth 80 mmDepth 80 mmHeight 3 mmPackaging content1
SilverStone Technology’s Nitrogon NT07-115X is a super slim profile CPU cooler designed for space limited applications that utilizes LGA 1156, 1155, or 1150 platforms. It has a copper center construction with extruded aluminum fins for excellent thermal conductive capability that rivals many larger coolers. The custom 80mm PWM fan was designed with fan blades to achieve the highest air pressure possible while maintaining an acoustic profile that is rare for cooler of this size. At a total height of only 23mm tall, the NT07-115X is an essential choice for super slim cases such as SilverStone Petit PT12 or PT13 utilizing LGA 1156, 1155, or 1150 processors.- Support Intel LGA1156/1155/1150 processors- Designed for low profile systems at only 23mm tall- Large, custom 80mm PWM fan for excellent cooling and low noise- Copper center and base with extruded aluminum fins- Easy to installAttachment screwedSocketsuitable 1156, 1155, 1150MaterialAluminum YesCooper YesPower Connection PWM fan connectorPower Input 0 - 65 watt(s)Voltage Range 0 - 9 VNumber of Revolutions 2000 - 3600 rpmVolume 21.9 - 34.7 dB(A)Volumetric Flow 26.5 - 47.7 m3/h, 15.6 - 28.1 cfmDimensionsFans Fan 1 80 x 10 x 80 mmCooler 90 x 23 x 90 mmTotal 90 x 23 x 90 mmWeightCooler 201 gramsFeaturesincluding Thermal Paste/Pad YesCooling Performance 65 watt(s)
Suurus:80 L x 80 W x 25 H mm tööpinge:4,5-13,8 V testitud:12V õhuvool:26 m3/h õhusurve:0,680 mm/H20 müratase:9,7dBA kiirus:1300 RPM võimsustarve:0,48 W tootjalehel:http://www.blacknoise.com/en/products/it/14/Noiseblocker-NB_BlackSilentFan_80mm
The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 120x120x25mm Colour: Black Weight: 120g Nominal voltage: 12V Starting voltage: 4,5V Current draw: 0,06A Nominal speed: 900rpm (+/-10%) Airflow: 68m³/h / 40,025CFM Noise emission: 11 dB(A) MTBF (25°C): 180000hrs Connector: 3-Pin Molex plug with rpm lead Extent of delivery: 1x Noiseblocker NB-BlackSilentPRO PL1 ( 120x120x25mm ) 1x Fan decoupling 1x 3 PIN fan extension 20cm 1x 3 PIN fan extension 50cm 4x Mounting screws 4x Knurled nuts Tech-Review has tested this product for you!
The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an aquastream XT or Eheim 1046 pump. The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity. This is especially helpful when using rubber decouplers or a shoggy sandwich. When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space.The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod. The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors.All variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube.Technical details:Dimensions without pump: approx. 56 x 67 x 198 mmFilling volume: approx. 150 mlConnection threads: G1/4Compatible to the following pumps:- aquastream XT- Eheim 1046 and pumps identical in constructionScope of delivery:One ReservoirThree sealing screws G1/4 (preinstalled)Please note: Fittings and pump are not included in delivery, please order seperately.>
Stylische Sleeves von CableMod, für Hydro-AiOs von Corsair & EVGA & NZXT, Textil-Sleeving aus ModMesh-Material, einfache Installation in wenigen Minuten
Tootekood: NF-P14r redux-1500 PGTIN: 4716123315278Jahutid ja lisad
Der nun als NF-P14r (r für engl. round) bezeichnete klassische NF-P14 140mm Lüfter eignet sich mit seinem Rundrahmen ideal für den Einsatz auf CPU Kühlern und erfreut sich nicht nur unter internationalen Hardware-Enthusiasten seit Jahren größter Beliebtheit – er hat auch wesentlich zu Noctuas Reputation als führender Hersteller geräuschoptimierter Premium-Komponenten beigetragen. Die neue redux-Edition legt dieses vielfach ausgezeichnete Modell in einer preislich zugänglichen, schlankeren Ausstattungsvariante neu auf, die ganz auf das Wesentliche reduziert wurde: den NF-P14 Premium-Lüfter. Mit dem renommierten SSO-Lager, einem MTBF Wert von über 150.000 Stunden und 6 Jahren Herstellergarantie ist der NF-P14 redux eine anerkannte Premium-Lösung, die bewährte Noctua-Qualität zu einem attraktiven Preis bietet. Die Performance-orientierte 1500prm PWM Version eignet sich ideal für hocheffiziente Gehäuse-, Radiator- oder CPU-Kühlung sowie alle anderen Applikationen, die sowohl hohe Leistungsreserven als auch automatische Reglung via PWM verlangen.
Alphacool is now the first manufacturer to offer a mini cooler for M.2 SSDs. This cooler provides passive cooling that ensures better performance power. Its original appearance also lets it fit seamlessly into any system. Everything needed for easy setup is included: thermal pads, clips, and two cooling plates. First, the thermal pads are placed onto the chips. Then, the cooling plates are placed on top of these and fastened with the clips. The slight height of the cooling plates ensures they aren’t in the way during installation, as well as letting them quickly dissipate heat! Technical Specifications: Material: aluminium Colour: black Cooling plate dimensions (LxWxH): 68.3 x 22 x 2 mm Scope of Delivery: 2x cooling plates 2x thermal pads 0.5mm 1x thermal pad 1mm 8x clips Mounting manual Notise: Not compatible to the following Mainboards: MSI x99s sli Plus
The Arctic thermal pads are ideal for efficiently exchanging heat between different components. Thanks to the high quality of workmanship and excellent thermal conductivity, the pads are used in many places on computers and electronic components. The thermal pad, which is based on silicone and a special filler, far outperforms generic and performance-oriented pads. In a test by PC Games Hardware (11/2018), the "excellent processability and reusability in every respect" was praised. In combination with the fair price and good performance, our thermal pad was recommended as a "price-performance tip". Thanks to its low hardness and good compression properties, the thermal pad acts as a perfect gap filler and easily bridges uneven surfaces and air gaps. The ARCTIC Thermal Pads are non-adhesive and can therefore be placed precisely. Installation is child's play and therefore perfect for beginners. The pad contains no metal particles, is electrically insulating and not capacitive. Handling is therefore safe since contact with electrical parts does not lead to damage. Technical specifications: Dimensions 290 x 290 mm Contents 1 piece Thickness 0.5 mm Thermal conductivity 6.0 W / mK Hardness 25 shore 00 Relative density 3.2 g / cm³ colour blue Operating temperature -40 ~ 200 ℃ Volume resistance 1 X 1012 Ω-cm Interruption voltage 12 KV / mm Draw resistance 2.5 Kgf / cm² Elongation 45% Dielectric constant 14.1816 ε at 60 Hz 13.0264 ε at 1K Hz 13.0264 ε at 1M Hz Flammability V-0
Toote kirjeldus inglise keeles:The Alphacool Cape Coolplex reservoirs have been well-known and popular on the water cooling market for years!But even such great products can sometimes use an update to fulfill even the most recent demands. Hence we at Alphacool have let the old series run out and now introduce the new series with POM end pieces as “LT” and now even with solid metal end pieces as the “Copper Edition”. Of course the tubes are made from high-grade Plexiglas which has proven itself with safe operation in many cooling systems for many years!The changes made are subtle but very well thought through:Besides the new materials and surface finishes the top piece of the reservoirs is now equipped with an additional thread, making them great for installation of a Fillport. Additionally the reservoir can now also be installed horizontally! The riser tube is now removable for applications where the top of the reservoir is used as an inlet.A nice side effect: Now even more lighting modules can be installed for beautiful lighting effects.To round off the new concept the screw plugs on all versions now have an elegant polished copper surface finish!For maximum compatibility all threads are G1/4” in size. The proven transparent mounts are now also included again for almost invisible mounting. Make your PC a piece of art with the new Cape Coolplex reservoirs!Technical specifications:- Material: POM, Plexi- Height: 100mm- Diameter: 50mmReviews:- Connection threads: G1/4"- Weight: 264gExtent of delivery:- Reservoir- 2x Mounting clamps- 2 x G1/4" Screw plugsPlease note: For mounting additional screws are needed. We recommend ordering item No. 15705 with this reservoir.Weight & dimensionsWidth 50 mmDepth 50 mmHeight 100 mmDesignMaterial Polyoxymethylene (POM)Colour of product Black, Transparent
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connectorThis manifold is very practical and offers many advantages thanks to its innovative design: Barely any thread length restrictions, almost no flow resistance and mounting possibilities are aplenty. The best thing: This manifold even offers 5 In- respectively outlets. Technical specifications Material: Brass Colour: Deep Black Dimensions Length: 45mm Width: 17mm Height: 17mm Extent of delivery 1 x Alphacool HF 5-way connection terminal G1/4 inner thread - Deep Black
Optimised for Static Pressure During the development of the new P14 PWM, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P14 PWM is particularly suitable for use on heatsinks and radiators. More Efficient Technology The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P14 PWM to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. Maximum Quietness, Minimum Vibration Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Consequently, we have extended the warranty to 10 years. 200 to 1700 RPM regulated via PWM Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed. High Quality Bearing Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data: Performance Fan Speed: 200 - 1700 rpm Airflow: 72.8 CFM/ 123.76 m³/h Static Pressure: 2,40 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PWM Connector: 4-Pin Connector Fan Bearing: Fluid Dynamic Bearing Electric Characteristics Typical Voltage: 12 V DC Starting Voltage: 3.9 V Current: 0.12 A Cable Lenght: 400 mm Size & Weight Lenght: 140 mm Width: 140 mm Height: 27 mm Weight: 194 g
Silber vernickeltes Compression Fitting von EK Water Blocks, für Röhren mit 16 mm OD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, 6er Pack
Set aus drei 120-mm-Gehäuselüftern, max. 2.000 U/min, 4-Pin-PWM-Anschluss, PST-Technologie, langlebiges Fluiddynamik-Lager, adressierbare RGB-Beleuchtung
