Tootekood: ZM-AF120 ARGB BLACKGTIN: 823884203929Jahutid ja lisad
Fan ZM-AF 120 ARGB black This fan is characterized by compact dimensions of 120 x 120 x 26 mm, which allows for easy installation in most computer cases. Its speed can reach up to 2000 revolutions per minute, ensuring effective cooling of components even during intensive use of the computer. Additionally, the Fan ZM-AF 120 ARGB has the ability to adjust the rotational speed, which allows you to adjust the cooling to individual needs. One of the greatest advantages of this product is the ARGB backlight, which not only gives the computer a modern look, but also allows you to create a unique design tailored to your preferences. Thanks to the use of active air cooling, the Fan ZM-AF 120 ARGB effectively dissipates heat, preventing overheating of components and extending their life. This fan is equipped with a 4-pin connector, which guarantees a stable connection to the computer's motherboard. Despite its efficiency, the ZM-AF 120 ARGB Fan is characterized by a low noise level of only 29.7 dB, which makes the computer's operation quiet and comfortable. The set includes all the necessary accessories for installing the fan, which makes the assembly process simple and quick. Additionally, the low weight of the product (160 g) does not burden the computer's structure, which is especially important when building efficient configurations.
360 mm large radiator 3x 120-mm fans with RGB lighting Compatible with common RGB control software Pump with up to 2,800 RPM Compatible with mainstream Intel and AMD sockets Eskimo Junior Neon 360 ARGB: compact all-in-one solution The all-in-one water cooling system Eskimo Junior Neon 360 ARGB combines good looks with efficient cooling. Despite its small size, the CPU block is highly effective thanks to its copper plate. Efficient cooling A 360 mm radiator is used as a heat sink for the heated coolant. It is made of aluminum and is very efficient at dissipating heat. Its coating provides good resistance against corrosion. The three included 120-mm RGB fans ensure excellent airflow. They impress with very quiet operation and a static pressure of 4.28 mmH2O. Overall, this results in maximum cooling performance with minimal noise generation. Integrated RGB lighting on pump and fans The package is rounded off by the integrated and very striking RGB lighting on the CPU block and fans. In addition, it is compatible with almost all RGB control programs, allowing you to customize the lighting to your preference.
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Socket 16mmThis connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 16mm. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 21mm Height: 18mm Scope of Delivery: 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - Chrome
With the "Icicles", Alphacool has created a true masterpiece. These connections promise absolute tightness and high quality. Suitable for all hard metal pipes with an outer diameter of 12mm. On the other side of the connection there is the usual ¼” thread. Available in deep black and chrome. First, the union nut is put on the pipe, followed by a plastic washer that protects the O-ring and the thick O-ring itself. Now the pipe is simply put into the connection in which the second O-ring is already sitting, which fits very tightly against the pipe. As a last step, the union nut is pushed onto the connection and screwed on. Due to the size, the union nut cannot be screwed on tightly enough. But this has also been thought of, as an 8 mm hexagon key can be inserted from below to hold the connection in place. scope of delivery 1x Alphacool Eiszapfen 12mm HardTube screw-on nozzle G1/4 - Deep Black
With the new compression fittings from Alphacool for Plexi, brass or carbon tubes, Alphacool is taking a further step towards perfection and quality. The first two colours, chrome and deep black, offer great variety. The fully coordinated product series allows each system to shine in its own right, and individuality has no limits when paired with the Alphacool Plexi and brass tubes! The colouring is bound fast to the brass surface with a new chromatization process. This ensures the longevity of the intense colour and prevents chipping of the chrome layer. An Alphacool logo on the connector emphasizes the distinctive nature of this product once again. The Function of this Connector is:This connector is used to connect two 13mm Plexi, brass, or carbon tubes at a 90° angle. Dimensions: Width: 38mm Height: 38mm Technical Details: Material: brass, chromatized Colour: deep black Scope of Delivery: 1 x Alphacool HT 13mm HardTube Compression Fitting 90° L-Connector for Plexi, brass tubes - knurled - Deep black
With the new compression fittings from Alphacool for Plexi, brass or carbon tubes, Alphacool is taking a further step towards perfection and quality. The first two colours, chrome and deep black, offer great variety. The fully coordinated product series allows each system to shine in its own right, and individuality has no limits when paired with the Alphacool Plexi and brass tubes! The colouring is bound fast to the brass surface with a new chromatization process. This ensures the longevity of the intense colour and prevents chipping of the chrome layer. An Alphacool logo on the connector emphasizes the distinctive nature of this product once again. The Function of this Connector is:This connector is used to connect two 16mm Plexi, brass, or carbon tubes at a 90° angle. Dimensions: Width: 41.5mm Height: 41.5mm Technical Details: Material: brass, chromatized Colour: chrome Scope of Delivery: 1 x Alphacool HT 13mm HardTube Compression Fitting 90° L-Connector for Plexi, brass tubes - knurled - Chrome
With Alphacool’s new compression fittings for plexi, brass, or carbon tubes, Alphacool is taking another step in the direction of perfection and quality. The first two colours, chrome and deep black, offer a great variety to suit many tastes. The fully coordinated product series gives every system a chance to shine, and the customization options are endless when paired with Alphacool plexi-brass tubes! A new chromatization technique binds the colouring tightly to the brass surface. This improves the longevity of the intense colour and prevents any chipping of the chrome layer. Blue Alphacool lettering on some of the connectors also highlights the uniqueness of these parts. The function of these connectors is: This connector can be used to connect a 16mm plexi, brass, borosilicate glass, or carbon tube to a G1/4" thread. Sixpack: Since six connectors of one kind are often necessary, Alphacool is now offering Sixpacks. This has a lot of advantages for you! Technical Details: Material: chromatized brass Colour: deep black Scope of Delivery: 1x Alphacool HT 16mm HardTube compression fitting G1/4 for plexi-brass tubes (rigid or hard tubes) - knurled - deep black sixpack
Hochwertiger Schlauch aus Polyurethan (PUR) passend zu den Steckverbindern. Relativ enge Biegeradien sind möglich bei gleichzeitig guter Festigkeit. Dieser Schlauch wurde extra für Wasserkühlungen entwickelt, und speziell den Anforderungen angepasst. Farbe: glasklar Abmaße: Außendurchmesser: 8mm, Innendurchmesser 5,5mm Preis je Meter, Lieferung am Stück, Bestellmenge = Schlauchlänge in Metern.
Produktbeschreibung:Doppelnippel von G3/8" Aussengewinde auf G1/4" Innengewinde. Technische Daten:Höhe 19mm. Hinweis: Um diese Adapter 100%ig dicht zu bekommen empfehlen wir ihnen die verlinkte Dichtung. Dieses Produkt wurde für Sie getestet:OCReviews
This nipple can be used to connect two G1/4 inch threads together. Delivery includes O-rings Technical data Connecting element with 2x G1/4 external thread Material: nickel-plated brass Inner diameter: 8mm Total length: 19mm Inner length without thread: 7mm scope of delivery 1x double nipple G1/4 AG to G1/4 AG
Product description: L-connector with 1x G1/4 inch internal thread and 2x G1/4 inch external thread Technical data: Material: nickel-plated brass Dimensions: Upper T length: 50mm Left & bottom thread: 12mm Right internal thread: 15mm Height: 31mm Note: To make these adapters 100% leak-proof, we recommend using Phobya thread sealing tape.
Our trusted fittings are available in a whole new design! Robust high-quality reducing socket from G1/4" inner thread to G3/8" outer thread. Technical details: Material: Brass, black nickel coated Thread size: 1/4" inner thread to 3/8" outer thread Extent of delivery: Reducing socket
This extension (G1/4" outer thread to G1/4" inner thread can be used to extend connection threads and therefore allows easier use of angled fittings. E.g. the output hose can therefore be mounted in the same direction as the hose for the Input as the fitting are at different heights. Color: Silver nickel coated Height without thread: 10,1mm Thread length: 4mm Extent of delivery: Extension G1/4" to G1/4" knured - silver nickel Please note: This knurled extesion is shipped with a seal
Connection element with G1/4" inner threads on both sides for endless application. Technical specifications: Inner thread G1/4" to inner thread G1/4" Material: Nickel plated brass Length: 16,5mm Diameter: 17mm Extent of delivery: 1x Bushing G1/4 to G1/4" knurled
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 26 mm Height: 23 mm Thread: G1/4" Thread length: 5 mm HardTube size: 16 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,042 kg Scope of supply: 1x Alphacool Eiszapfen PRO 16 mm HardTube Fitting G1/4 - Chrome
Connection element with G1/4" inner threads on both sides for endless application. Technical specifications: Inner thread G1/4" to inner thread G1/4" Material: Black nickel plated brass Length: 16,5mm Diameter: 17mm Extent of delivery: 1x Bushing G1/4 to G1/4" knurled
Our trusted fittings are available in a whole new design! Robust high-quality connector piece with three G1/4" inner threads. Technical specifications: Material: Brass, silvernickel coated Thread size: 3x 1/4" inner thread Extent of delivery: 1x Angled G1/4" connector piece 3x G1/4" inner threads Note: To ensure a perfect seal we recommend the use of Phobya thread sealing tape.
This G1/4" extension can be used to extend a thread further out. This makes it possible to use angled connectors more versatile and offers many more possibilities! Technical specifications: Colour: Silver nickel Length: 20mm This adaptor is shipped with a seal!
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 26 mm Height: 23 mm Thread: G1/4" Thread length: 5 mm HardTube size: 16 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,042 kg Scope of supply: 1x Alphacool Eiszapfen PRO 16 mm HardTube Fitting G1/4 - Chrome Sixpack
The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.AssemblyRemove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.Technical data:L x D: 22.2 x 22 mmThread length: 5 mmMaterial: BrassConnection thread: G1/4".Colour: BlackCompatible with all HardTubes with 14mm outer diameter.Download data sheet PDF: Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - deep black
This G1/4" extension can be used to extend a thread further out. This makes it possible to use angled connectors more versatile and offers many more possibilities! Technical specifications: Colour: Black nickel Length: 50mm This adaptor is shipped with a seal!
The fitting from Nanoxia in the colour black, has an angle of 30 degrees and two G1/4" female threads. Technical Data: Color: Black Angle: 30° Diameter: 18 mm Length: 22 mm Thread: Inner G1/4" Thread Length: 5 mm
The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.AssemblyRemove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.Technical data:L x D: 22.2 x 22 mmThread length: 5 mmMaterial: BrassConnection thread: G1/4".Colour: ChromeCompatible with all HardTubes with 14mm outer diameter.Download data sheet PDF: Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - chrome
The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while the third O-ring serves as a seal and is attached together with the HardTube. The union nut compresses the O-ring ensuring a tight seal. This not only provides a triple lock, but also increases the tensile strength of the HardTube. This means that it requires considerable force to pull the HardTube out of a tightened fitting.AssemblyRemove the union nut together with the O-ring inside. The connection is then screwed to any component with G1/4" thread. Insert deburred HardTube then put the O-ring and the union nut over them. The last step is to screw the union nut to the fitting.L x D: 22.2 x 22 mmThread length: 5 mmMaterial: BrassConnection thread: G1/4".Colour: ChromeCompatible with all HardTubes with 14mm outer diameter.Download data sheet PDF: Alphacool Eiszapfen 14mm HardTube compression fitting G1/4 - knurled - chrome sixpack
The fitting from Nanoxia in the colour black, has an angle of 60 degrees and two G1/4" female threads. Technical Data: Color: Black Angle: 60° Diameter: 18 mm Length: 23 mm Thread: Inner G1/4" Thread Length: 5 mm
The fitting of Nanoxia in black, has an angle of 30 degrees and couples two Hard Tubes, which do not run on a common straight line. Technical Data: Color: Black Angle: 30° Diameter: 20 mm Length: 30 mm Connections: 2x 12 mm Ø
The fitting of Nanoxia in black, has an angle of 60 degrees and couples two hard tubes, which do not run on a common straight line. Technical Data: Color: Black Angle: 60° Diameter: 20 mm Length: 33 mm Connections: 2x 12 mm Ø
The 90 ° angle adapter from Bykski is made of brass and has two G1 / 4 “internal threads. Technical specifications: Dimensions: 23.7 x 23.7 x 18.68 mm Material: brass Coulor: silver Angle: 90 ° Thread: 2x G1 / 4 “internal thread
The HardTube project has become a reality. Alphacool is breaking new ground and setting a new standard!Up till now, the most commonly used method for connecting water cooling systems was normal PVC tubing - but now, Alphacool is offering another way to set up your system. HardTubes provide more organisation for a system, giving it a distinctly more structured appearance. Available now are the brand-new brass tubes, in black chrome and chrome. With the corresponding connectors and their easy functionality, these tubes can be linked or sealed together for an absolutely leak-proof fit. The plexiglass tubes can be fitted into a system easily with the right bending tools, without requiring extra angled pieces. The tubes must be cut to the right length in order to fit into the system. The following options are available:HardTube 13/10mm Clear Plexi 20cm, 40cm, 60cm and 80cmHardTube 13/10mm brass chrome 20cm and 40cmHardTube 13/10mm brass black chrome 20cm and 40cmHardTube 16/12mm Clear Plexi 20cm, 40cm, 60cm and 80cmHardTube 13/10mm 90° Plexi 10/30cm, 20/40HardTube 16/13mm 90° Plexi 10/30cm, 20/40Reviews:MNPCTech.comNote: Due to the made-to-fit pipes, some effort is required to plug the connections in straight.Scope of delivery:1x Alphacool HardTube 13/10mm 90° Plexi (PMMA) 20/40cm Note: not compatible with Monsoon fittings
Mit diesem günstigen Schlauchverbinder können Sie Systeme mit unterschiedlichen Innendurchmessern verbinden. Sie brauchen keinen Kabelbinder oder Schlauchschellen, der Schlauch dichtet auch so ab. Material: Polyamid, weiß Anschluss: 8/6mm auf 10/8mm (Di = 6mm auf Di = 8mm)>
Safely and quickly connects hoses. No zip ties or hose clamps are required, the hose seals safely on the connector. Angled by 90° to allow tight radiuses which would otherwise result in buckled hoses.Technical specifications: Material: Nickel plated brassSuitable for hoses with an inner diameter of 10mm Extent of delivery: 1x 10mm (3/8") 90° hose connector - Nickel plated brass Aquainfos hat dieses Produkt für Sie getestet
Safely and quickly connects hoses. No zip ties or hose clamps are required, the hose seals safely on the connector. This Y-piece allows the creation of a branch connection.Safely and quickly connects hoses made from PVC and others (e.g. Tygon, Masterkleer).Technical specifications: Material: Nickel plated brassSuitable for hoses with an inner diameter of 8mm Extent of delivery: 1x 8mm (10/8mm) Y hose connector - Nickel plated brass Aquainfos hat dieses Produkt für Sie getestet
Safely and quickly connects hoses. No zip ties or hose clamps are required, the hose seals safely on the connector. This Y-piece allows the creation of a branch connection.Safely and quickly connects hoses made from PVC and others (e.g. Tygon, Masterkleer).Technical specifications: Material: Nickel plated brassSuitable for hoses with an inner diameter of 10mm Extent of delivery: 1x 10mm (3/8") Y hose connector - Nickel plated brass Aquainfos hat dieses Produkt für Sie getestet
Alphacool’s new quick connectors, called the “Eiszapfen” (icicle), are the newest addition to the “Eis” series. High quality and impressive features take every water cooling system a step forward in quality and practicality! A quick-release connector can be used anywhere where expandability, flexibility, or cleanliness play a big role. The compact connectors have a 1/4” thread on both sides, making them compatible with all standard components. The connectors can be separated by pulling down the outer rings. Both sides immediately shut completely, so that no water can leak out. The special N.D.S.L. technology (no drip, no splash, no leak) ensures no water drips, splashes or leaks out while opening the connectors. When the pieces are reconnected, both sides audibly click together and are locked tightly with a double o-ring, which is simply pressed together when reconnecting. This also prevents any deterioration of the o-ring. The mechanism was also designed for longevity, to ensure a secure connections even after several years. Many quick connectors tend to compromise the flow rate. But Alphacool has found a way to solve this problem. These quick connectors can still sustain a high flow rate! Alphacool’s quick connectors are available in two models. In deep black and completely chromatized versions, they fit seamlessly into any system. Technical Specifications: Dimensions (L x D): 64.6 x 23.9mm Material: brass Colour: chrome Thread: 2x 1/4” inner Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit with double bulkhead G1/4 inner thread - chrome Notice: The quick connectors should not be used dry for prolonged periods, as this will put stress on the o-rings and leak tightness can no longer be guaranteed.
Safely and quickly connects hoses. No zip ties or hose clamps are required, the hose seals safely on the connector. This Y-piece allows the creation of a branch connection.Safely and quickly connects hoses made from PVC and others (e.g. Tygon, Masterkleer).Technical specifications: Material: Nickel plated brassSuitable for hoses with an inner diameter of 13mm Extent of delivery: 1x 13mm (1/2") Y hose connector - Nickel plated brass Aquainfos hat dieses Produkt für Sie getestet
