Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 22 mm Height: 20 mm Thread: G1/4" Thread length: 5 mm HardTube size: 13 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,023 kg Scope of supply: 1x Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Chrome Notice: Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days. We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool. Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
The two clamp set is suitable for the equalizing tanks of the Z-series from Bitspower. They make it possible to mount the expansion tank individually inside or outside the case, also with the corresponding pump. The set contains two clamps each with four screws and nuts. The holders have an 80mm, 5mm high and 15mm deep base. The clamps themselves are 10mm wide, have an inside diameter of 60mm and an outside diameter of 66mm. Technical Data: Dimensions: 80 x 70 x 15 mm (W x H x D) Inner Diameter Clamps: 60 mm Outer Diameter Clamps: 66mm Material: Plastic Color: Black Compatibility: Bitspower water tanks of the Z-series
Wasserkühler für Sockel 3647 Narrow P für High-End-CPUs von Intel, inklusive Waterblock für VRMs auf dem Mainboard ASUS ROG Dominus Extreme, für Custom-Wasserkühlungen, vernickelter Vollkupfer-Heatsink + transparenter Acryldeckel, integrierte digital adressierbare RGB-LED-Beleuchtung
The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. It has a total of seven G1/4" ports and the tube itself is made of acrylic. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Black, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Visual appearance combined with functionality. After the successful launch of the “Lian Li 011D Mini MK1“, now the Lian Li Mini is followed by the “MK2” front distro plate. It is made of high-quality and transparent acrylic glass. Despite the small case, our distro plate MK2 allows all radiators as well as GPU and CPU to be connected in the circuit. This is rendered possible by a large chamber and 5 channels with a total of 12 ports (incl. fill port & drain port). The “MK2” will replace the original tempered glass pane. The distro plate is made of high-quality acrylic and the accuracy of fit is assured. Additionally, we use EPDM seals to guarantee leak tightness. After the leak test, a test seal is glued on the back of the plate. The screw-fitting points provided by Lian Li are used for fixation. To mount the distro plate safely, 4 screws with sealing disc are included in the scope of delivery. It is important to ensure that only (!) “ECWB SE360 (2x) “ & “ ECA SE240 (1x)“ radiators are usable because the accuracy of fit can only be assured in this case. A frame sticker (you may choose between black or white) decorates the sides of the front. Thereby, mounting strips that are glued on the rear side of the distro are covered. Overview of Features smallest distro plate of the Lian Li series frame sticker, selectable in black or white clever plug-in system for effortless installation adapter allows perfect fit of a D5 pump compatible with EK-CoolStream SE360 2x and 1x SE240mm (radiators) Technical details Material: high-quality acrylic glass, plastic Manufacturing: CNC machining of the acrylic, assembly by hand Dimensions: without pump (W x H x D): 487 x 211 x 21 mm, with pump (W x H x D): 487 x 211 x 90 mm Colour: transparent Connections: 12x G1/4" Capacity: 435 ml Compatibility: 3x360mm fan space Scope of Delivery Lian Li Mini MK2 4x M3 screws
The Protium reservoir from Singularity Computers is a 200mm tube with a diameter of 60mm. Together with the attachments made of acetal and acrylic, the reservoir reaches a height of 239mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 239 mm (L x W x H) Diameter: 60 mm Material: Acetal (lid, base), Acrylic (reservoir), Aluminium (retention rings) Color: Black, Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 200 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
The CORSAIR H100 RGB all-in-one liquid CPU cooler delivers strong, dependable cooling and stunning lighting, with two CORSAIR SP120 RGB ELITE PWM fans, a 240mm radiator, and 29 RGB LEDs.
Keep your system running smoothly with our reliable and affordable X-8 thermal paste, making it the ideal choice for everyday users, gamers, and DIY PC builders who want to keep their PC setup cool, quiet, and stable under any load. Perfect for Beginners and Experienced Users Alike Designed with both performance and convenience in mind, X-8 thermal compound is the perfect choice for everyday users, gamers, and DIY PC builders alike. X-8 features a silicone oil-based carrier mixed with aluminum and zinc oxide powder. Created to enhance thermal performance in CPU and GPU cooling, X-8 is ideal for use in both air and liquid cooling systems. The well-balanced formula provides very good thermal conductivity and good resistance, making application easy, while still offering the durability needed to resist the pump-out effect. Durable Enough to Resist Pump-Out Effect The pump-out effect occurs when thermal paste is gradually squeezed out between the heat spreader and the CPU cooler’s base plate due to deformation from temperature changes under load. Materials like silicon and copper have different thermal expansion rates, which makes the effect more pronounced, especially with a copper cooler on a graphics chip. At lower temperatures, the pump-out effect is less severe, making X-8, with its low viscosity, ideal for CPUs with lower heat output. Signs that the thermal paste needs replacing include rising CPU temperatures and reduced clock speeds.
3x 120 mm PWM fans optimized for use in cases Daisy-chain for less cable clutter Excellent cooling at up to 1,800 RPM and quiet operation with a maximum of 23.8 dB(A) Stylish lighting thanks to addressable RGB LEDs Standard orientation for regular airflow High airflow of 102.53 m³/h Details of the Jonsbo ZL-120W ARGB Fans The Jonsbo ZL-120W is a powerful 120 mm fan specifically designed for use as a case fan. It features daisy-chain connectivity, a plug-in system that reduces cables in your gaming PC and contributes to a cleaner look. With its addressable RGB lighting, it not only looks stylish but also delivers plenty of power. The built-in hydraulic bearing significantly extends the life of your device, ensuring long-term reliable, low-maintenance operation. Efficient cooling performance at low noise levels The Jonsbo ZL-120W adjusts its speed via a PWM signal to match the system’s performance requirements. This allows for precise adjustment of fan speeds from 800 to 1,800 RPM. Even at full load, it operates at just 23.8 dB(A). Additionally, each corner is equipped with rubber mounts to isolate vibrations and minimize noise. With an airflow of up to 102.53 m³/h and a static pressure of 2.21 mmH₂O, the CPU is effectively cooled.
Pure 12 LED DC Fan- RedThe Thermaltake Pure 12 LED fan comes with reliable, stable performance and gorgeous vibrant style. Available in 120mm, the Pure 12 LED fan offers the perfect balance of silence, style and efficiency.High PerformancePure 12 LED fan is designed to cool silently, so user can keep his mind focused on the task at hand without bothering.Enhanced Airflow9 fan blades create a torrent of air without creating excess noise.Long life sleeve bearingLong-life bearing offers better reliability and extends life span.Easy to installPure 12 LED fan is designed for easy and quick installation.Ideal compatibilityIdeal for the PC case, power supply and CPU heatsink.Attachment screwedPower Connection 3-Pin-fan connectorPower Input 0 - 1.68 watt(s)Voltage Range 9 - 12 VNumber of Revolutions 0 - 1000 rpmVolume 0 - 19.5 dB(A)Volumetric Flow 0 - 69.6 m3/h, 0 - 40.99 cfmDimensionsFans Fan 1 120 x 120 x 25 mmWeightFan 94 grams
Tootekood: FD-FAN-PRI-AL12-3PGTIN: 7340172701606Jahutid ja lisad
Dimensions 120x120x25mm, Turns 1200rpm, Air flow rate 86.02m³ / h, Air pressure 1.27mmH₂O, Volume 19.5dB (A), Fan bearing LLS, Connection 3-pin, Voltage range 7-12V, Power consumption 1.2W, Special features RGB illuminated, RGB header (3-pin + 5V / DATA / GND), FD-FAN-PRI-AL12-3P
The Alphacool Eisbaer Pro Aurora CPU AIO water cooler is a special development for processors with particularly large CPU dies. These include the AMD Threadripper and Epyc processors and the Intel CPUs for the LGA 3647 and LGA 4189 socket. With the optional XPX Pro AM4 mounting bracket, the Alphacool Eisbaer Pro CPU cooler can also be used on AMD Ryzen processors. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42 mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the additionally available AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4 mm thick and also have an optimal distance of 0.4 mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3 mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Copper radiator As per usual with Alphacool, the radiators are made of copper. Alphacool is the first manufacturer worldwide to use copper for all water bearing components such as the antechambers, the cooling fins and the cooling channels to which the fins are soldered. The connection threads are made of brass for strength reasons. In addition, the cooling fins are only lightly painted. On closer inspection the copper shimmers through a little. A thick lacquer coating would result in a reduction of the cooling capacity. The fin density is at optimal 15FPI. Therefore the radiator works perfectly even at low airflow. A too high fin density would require fans with higher speed to achieve the same cooling capacity. A lower fin density would no longer benefit from fast rotating fans. So the golden mean was chosen. Real water cooling The Eisbaer Pro Aurora consists almost entirely of actual water cooling components. The extremely robust and durable TPV hoses are used in the enterprise products for servers and workstations. The hose connections also come from the Enterprise series from Alphacool and use the standard G1/4". This makes the Eisbaer Pro Aurora fully compatible with all common water cooling products. The quick-release fastener allows easy expansion of the AIO with additional components. The most important of these are the prefilled radiators and the Eiswolf GPU AIO water cooling system. Fan and lighting The entire Eisbaer Aurora Pro cooler is equipped with addressable digital RGB LEDs. This gives a real eye-catcher in the Case. The fan used is the Aurora Rise with 140mm. Due to the special blade design, the fan is extremely quiet and the addressable RGB LEDs provide brilliant illumination. The Alphacool Aurora Rise fan convinces with a max. statistical pressure of 2.20 mm/H 2 O and offers a max. air flow of 154.1 m³/h. The PWM control allows the fan to be controlled over a wide speed range. In addition, it offers a zero control. It can therefore be regulated down to 0 rpm and then starts with approx. 350 rpm. Of course all Digital RGB LEDs can be controlled at will. Depending on the controller almost all effects are possible. How to connect everything The fans are normally controlled via a 4-pin PWM connector. An included Y-adapter for the fans makes it easy to connect them to the mainboard. This allows all fans to be controlled and regulated via one connector. Each fan has a 3-pin JST connector including Y-adapter for the LED illumination. This allows the fans to be connected directly together and can also be controlled simultaneously via a controller. For the connection to a typical 3-pin 5V connector a corresponding adapter is included. Alternatively, the included Digital RGB controller can be used. The pump of the Eisbaer Aurora uses a 3-pin Molex connector. This can also be connected to the mainboard. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Technical data radiator L x W x H 316 x 144 x 30 mm (+/- 3% in the range of the pre-chambers) Material fins, chambers & channels copper Material threads brass Material outer housing stainless steel G 1/4“ threads 2 x for tubes For fan size 140 mm Fan mounting options 2 x one-sided / 4 x both-sided Technical data cooler and pump L x W x H 64 x 79 x 54,3 mm Number of LEDs 10x Digital RGB LEDs Material cooler bottom Nickel plated copper Material cooler top PMMA Threads 2 x G1/4“ (+ 1x Fillport G1/4“) Pump typ DC-LT 2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow rate 75 L/h Technical data fans Speed 0 - 2000 RPM Static pressure 2,20 mm H 2 O Air flow rate 154,1 m³/h Fan connector 4-Pin PWM Connection Digital aRGB 3-Pin JST + 3-Pin 5V Dimensions 140 x 140 x 25 mm Compatibility list: - Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 - AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8
The cooling units from Hailea have been used in trusted waterchillers from other manufacturers for over 15 years. The new heat exchangers of the Ultra series are made from titanium. Therefore the chillers are perfect for watercooling systems. Another positive aspect about the Hailea units is the low noise emission. The pricing of the new series is also pleasantly affordable. New revision: New cool design More robust materials for even longer lifespan Lowered noise emissions Suitable for continuous operation Noise emissions: The small chillers (like HC150) have a noise emission of 20dB(A) only and can be used near the computer / aquarium without disturbing. Bigger models (like HC500) should be additionally decoupled to reduce the noise level if necessary The models HC1000 und HC 2000 should be extra decoupled or maintained in a seperate room. This waterchiller basically replaces the radiator as the coolant is chilled to the desired temperature by this unit. Temperatures down to 4°C are possible, please note that at low temperatures (high temperature difference) condensate may accumulate. Suitable insulation accessories are also available in our shop. Alternatively the coolant temperature can be set to just below room temperature to avoid this problem. Thanks to the low temperatures incredible overclocking potential is available! The lifespan of the components is extended by multiples. This system is also great for no-noise applications as the chiller can be located in another room. We recommend integration of the chiller into the cooling loop in combination with a radiator. This allows use of the chiller when required (overclocking, Benchmarks, summer etc..) and use of the radiator during normal operation. To estimate the required cooling performance here some non-binding estimates. The exact thermal emissions can be requested from the manufacturer of the hardware. CPU: 80W (standard) to 150W (overclocked) GPU: 50W (small cards) to 250W (GTX 980) MB: 20 to 40W per component The added values of your system must not exceed the given cooling capability of the chiller. What aquarium size can be cooled with my water chiller? The manufacturer provides the following data: Model / aquarium size in liters: HC-130 / 50-100L HC-150 / 50-200L HC-250 / 100-300L HC-300 / 100-400L HC-500 / 200-800L HC-1000 / 300-1000L HC-2000 / 400-1500L We at Aquatuning wish to advise you that the manufacturer’s data was obtained under optimal circumstances. The temperature response of the aquarium may greatly vary because of insulation, heat from lights respectively sunlight. Hence we recommend using the larger model when reaching the upper limit of the aquarium size values. Note regarding shipping: This unit can only be shipped via a forwarding company. As the chipping charges differ by distance an online calculation is not possible. Please provide your full telephone number and E-Mail address when ordering, we will contact you after the order is complete. The shipping charge is approximately 50€ within Germany. Technical specifications: Power: 1 HP Power consumption: 550W Cooling capacity: 1650W (suitable for extreme OC and cooling) Recommended coolant flow: 2000-4000 l/h Weight: 31,5kg Cooling agent: R134A Dimensions: 400x500x440mm (LxWxH) Connector outside diameter: 23-27mm Heat exchanger material: Titanium max. compressive load: 0,8bar Temperature adjustments: Digital read-out (precision 0,1°C), temperature setting in 1°C steps current demand: 3.2 A (50 Hz) current drain: 736 W Scope of Delivery: 1x Waterchiller Hailea Ultra 2000 2x 90° angle with rubber seal 2x straight with rubber seal 2x suitable hose clamps Note for first-time users: If you should have problems with your chiller please contact us before returning the chiller to us. In most cases there is no actual problem with the chiller, but the functionality of the unit is not fully understood by the user yet. Please note the following: The compressor unit automatically switches itself on and off, if the temperature sensor is manipulated your warranty is void, the noise level or an allegedly not sufficient cooling performance are no reason for a reclamation. The chiller can only function properly if the cooling loop is equipped with a sufficiently powerful pump. If these facts are considered most reclamations can be avoided and you will greatly enjoy this product! Note for aquarium-use: The cooling performance is affected by the aquarium-lamp the reduced pump power due to filters and the thermal waste of the pump. We therefore recommend to order the ciller at least on power-lever higher that theoretically calculated This product has been reviewed for you (by): Overclockingstation Zockon bit-tech (engl.) How2 (Userreview): Hardwareluxx
High-End-CPU-Wasserkühler in Schwarz, passend für viele Intel-Sockel, Deckel aus transparentem Acryl, Kühlerboden aus Kupfer, schwarze Halterung aus Aluminium, integrierte aRGB-Beleuchtung
The Protium reservoir from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the attachments made of acetal and acrylic, the reservoir reaches a height of 139mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acetal (lid, base), Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Black, Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Tootekood: FD-FAN-PRI-AL18-PWM-2PGTIN: 7340172702665Jahutid ja lisad
Case fan Packaged Quantity: 2 (spetsifikatsioons are for single item) Package Content: 4 fan screws, 4 M4 x 43mm screws, 4 screws (6-32 x 43) värv: must frame, valge blades Fan Diameter: 180 mm Fan kõrgus: 38 mm Fan Bearing: Long life liugelaager pöördekiirus: 300-1200 pööret minutis õhuvool: 146.8 cfm müratase: 14.9 - 37.4 dBA Power ühenduspesa: 4-pin ARGB connector nominaalpinge: 12 V Features: Trip wire technology, PWM control mõõtmed (WxDxH): 18.2 cm x 18.2 cm x 4 cm kaal: 521 g Manufacturer Warranty: 3-year garantii
All-in-One water cooling from InWin, 360mm radiator and copper plate, cooling block with striking Nebula lighting, fans with integrated RGB lighting, high compatibility with Intel and AMD sockets.
Fan ZM-AF 120 black The ZM-AF 120 fan is not only a computer accessory, but above all a guarantee of proper cooling of the case. Thanks to its dimensions of 120 x 120 x 26 mm and active air cooling, it ensures optimal operation of computer components even during intensive use. The parameters of this fan are impressive - a maximum speed of 2000 rpm and a minimum speed of 600 rpm allow for precise adjustment of the fan's operation to current needs. Additionally, the noise level of 29.7 dB makes using the computer comfortable. The ZM-AF 120 fan is characterized by high quality of workmanship, which translates into its durability and reliability. Thanks to the 4-pin connector, installation is quick and easy, even for less experienced users.
The CORSAIR RS120 case fan delivers powerful cooling performance with its 120 mm diameter and 25 mm height. Featuring a rotation speed that ranges from 420 to 2100 rpm, this fan caters to diverse airflow needs, providing an airflow of 13.3 to 72.8 cfm for efficient cooling. With Pulse-width modulation (PWM) support, it dynamically adjusts speed based on system temperature, ensuring optimal performance while minimizing noise. The fan operates with a noise level between 10 to 36 dBA, making it suitable for silent or high-performance builds. In addition, the RS120 incorporates a zero RPM fan mode for silent operation when cooling is not needed. Its daisy-chain design simplifies cable management in PC builds by enabling multiple fans to be connected seamlessly. With a magnetic dome bearing, it provides longevity and efficient performance, while air pressure of 0.2 to 4.15 mm ensures focused airflow to critical components. The package includes 4 mounting screws for easy installation.
Alphacool's Eiszapfen is the high-end version of the already proven connectors and meets all the requirements placed on a connector with its high-flow, shape, processing and colour. Compatibility This 90° angled adapter has a rotatable 1/4" external thread on one side and a 1/4" internal thread on the other. This 90° angled connection is mostly used where space is limited and a special solution is required. For maximum flexibility, the adapter can be rotated on the external thread. Design With brilliant chrome, deep matt black and decent matt white, three colour variants are available that fit perfectly into any system. Thanks to special processes, the coatings are firmly bonded to the substrate. This ensures a high longevity of the colours and prevents the coating from flaking off. The connector now also has the Alphacool logo, which makes it unique in addition to its special shape! Technical details Material Brass Colour White Length 34 mm Diameter 18 mm Thread G1/4“ Thread length 5 mm Weight 38 g Download Datasheet PDF: Alphacool Eiszapfen L-connector rotatable G1/4 outer thread to G1/4 inner thread - White Fitting Map: You can find an interactive map of all Alphacool fittings here.
