Extension cable for 3-Pin cables e.g. for fans. With rpm signal lead. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. Sets: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors: 3-Pin extensionBlack sleeve, black connectors and black heatshrinkLength: 60cmConforms with RoHS Extent of delivery: 1x Phobya extension cable 3-Pin Molex 60cm - black This product has been reviewed for you:AquainfosTech-Review
A cable for extension or adaption or a 6-Pin plug. This cable is shipped completely sleeved. This doesn't just look great, it also protects the cable which can increase the lifespan of the cable significantly. And it looks just great! Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables:Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Connectors and Colours: 6-Pin black plug, 6+2-Pin black, black cablesConnector: 6+2-Pin PCIeLength: 30cm Extent of delivery: 1x Phobya PCIe power adaptor 6-Pin --> 8-Pin PCIe (or 6+2-Pin) 30cm - black This product has been reviewed for you:AquainfosTech-Review
This ribbon cable if perfect for DIY projects. 10 leads connected parallely end the cable mess inside of the case. The cable is very flexible and only 0.9mm thick which makes it easy to hide for a clean cable management. The cable can be used for a widespread field of applications. Especially when using a large case with many LEDs, fans or similar accessories the inside of the case is often plastered with a multitude of cables. This cable now allows the creation of extensions and adaptors of any desired length for a cleaner cable management. Color order: Brown, red, orange, yellow, green, blue, violet, grey, white black Technical specifications: Material:Copper, Plastic Length: 3m Thickness: 0,9mm Width: 13mm RoHS: Conforms 10-lead Extent of delivery: 1x Ribbon cable AWG28 10-lead. 3m
Connection cable for installation between computer and printer or joystick. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 300cm Colour: Black sleeve, black connectors, black heatshrink Connector type: Plug to plug Extent of delivery: 1x Phobya serial cable DB9 1:1 (plug to plug 9-Pin) connection cable 3m - black sleeved This product has been reviewed for you: Aquainfos Tech-Review Extremehardware (it.)
This cable permits operation of two PSUs in one system with one power button. Integration of this cable is extremely easy: Connect the first PSU to the Mainboard as usual, and connect the second one with the additional ATX plug. Of course both power supplies need to be connected to a 230V mains supply. Now both power supplies will start simultaneously when the power button is pushed, and both will also shut down when the system is shut down. The advantages of Dual PSU use are great! -New PSUs don't have to be so expensive any more - older PSUs can be re-activated - More connection possibilities - Bridging of distances is easier - and much more! Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called mesh, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 10cm and 20cm Color: Black sleeve Connectors: 2x 24-Pin to 1x 24-Pin Extent of delivery: 1x Phobya 24-Pin dual PSU start cable (2x 24-Pin to 1x 24-Pin), individually sleeved - black
A Y-cable for distribution of the VGA power connector on the PSU to multiple graphics cards.The majority of PSUs is not equipped with sufficient connectors for operation of a SLI or Crossfire system. With only one power connector, it is hard to sufficiently supply power to the second graphics card. The solution is this new Y-cable from Phobya. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Length: 30cm Colour: Black Extent of delivery: 1x Phobya Y-Kabel 8Pin Buchse auf 2x 6+2Pin Stecker (VGA) - Schwarz
With this cable it is possible to expand the front panel. The cable leads are sleeved with fine mesh sleeving, fitting into the system perfectly. Sleeving: This cable is not only practical, it is also optically appealing, The surrounding mesh, also called sleeve, which is surrounding the cable itself offers the advantages that every Pro-modder is looking for: A completely unique look, even of the cables in the system! Special attention was paid to the combination of cable connectors, sleeve and heatshrink which were used to ensure great design and a unique as well as elegant look. The idea behind these cables: Phobya's goal is to make the work of professional and hobby modders a bit easier with these cables. Sleeving is a lot of work and requires much time. But with these cables by Phobya the whole system can be redesigned any way you like by simply adding these cables. Technical specifications: Cable length: 30cm Colour: Black Extent of delivery: 1x Phobya front panel extension 30cm - black
This cable is used to connect the 2/2 way magnet valve from Alphacool. The 4-pin molex connector supplies the valve with 12V power. Two of the cable sockets are attached to the valve, the other two to an on/off switch. This allows the valve to be opened and closed manually. For a more detailed explanation, please watch the linked video. Technical Specifications: Cable - sleeved Length: 50cm Scope of Delivery: 1x 4-pin molex single adapter for Alphacool magnetic valve 50cm - black Notice:The first time connecting the cable socket to the magnetic valve will require somewhat more effort.
Recommended for the following Thermal Grizzly pastes: Aeronaut, Hydronaut, Kryonaut, and Kryonaut Extreme. The Thermal Grizzly Spatula, in its basic version for thermal paste, is an essential tool to ensure precise and even application. These plastic spatulas are soft and have lower hardness compared to metal tools, reducing the risk of scratching or damaging the surface of the CPU or other components where the thermal paste is applied. Plastic spatulas also offer the added benefit of being non-reactive with the metallic components of thermal compounds. Notes: Care should be taken to ensure that the spatula used is clean and free from residues or impurities. Residues on the applicator may affect the results of the application. The spatulas should only be used with thermal paste. The TG Spatula is recommended for Aeronaut, Hydronaut, Kryonaut, and Kryonaut Extreme, and is supplied in a convenient pack of three.
This G1/4 Inch screw plug can be used for many applications. So you can use it for the radiator, reservoir and some other components. Alphacool has this plug screw in 2 different colors: Chrome and Deep Black. Thus you can now make your modding project shine in a uniform color. Technical specifications: Material: Brass Colour: Chrome Thread size: G1/4 Inch Height without thread: 4.25mm Top diameter: 18mm Scope of delivery: 1x Alphacool Screw with O-Ring G1/4 Inch - Chrome
Drehbarer T-Splitter-Adapter von EK Water Blocks, Teil der EKWB Quantum-Linie, zur Verbindung von einem G1/4-Zoll-Außen- mit zwei G1/4-Zoll-Innengewinden, Silber (Nickel)
The coated connection for 12mm (AD) Hard Tubes from EK Water Blocks, is a compression fitting made of brass. It is in the colour black and comes from the Classic series, which convinces by a simple design. In this fitting, the union nut serves as a compression ring that presses the sealing ring onto the hard tube. Thus it offers a higher safety and sealing than e.g. the fittings of the EK-HD series. Technical Data: Material: Coated Brass Colour: Black Supported Tube: 12 mm OD Thread: G1/4", 4,5 mm Male Thread Length Outer Diameter (Fitting): 19 mm Installed Height: 12 mm Compatible Solid Tubing: Acrylic, PETG, Copper, Brass, Stainless Steel
Koolance QD3 Quick Disconnect Straight Female to G1/4 Inch – Silver Koolance QD3 Series: High-Quality Quick Disconnects for Maximum Flexibility in Water Cooling Koolance is renowned among experts for outstanding quality and premium design. The manufacturer offers a wide range of water cooling components – from cooling blocks and radiators to pumps, high-quality fittings, and tubing.A standout feature is the QD3 series of quick disconnects, providing maximum flexibility and convenience when connecting and disconnecting the cooling loop. With just one motion – by simply pressing down a metal ring – the connection is released without draining the entire system. This makes them ideal for frequently swapped components or the easy transport of external radiators. Why Choose Koolance Quick Disconnects? Tool-free quick connection and disconnection Minimal leakage thanks to No-Spill technology (max. 0.2 ml fluid loss) Perfect for modular water cooling – ideal for enthusiasts and overclockers Premium materials – black-coated brass for durability The Koolance QD3 series consists of male and female connectors that securely lock together. This model is the black, straight female version with a G1/4-inch outer thread, compatible with most water cooling systems. Maximum compatibility – easy handling – professional quality. Perfect for anyone looking to keep their water cooling setup flexible
