Suurus:92 L x 92 W x 25 H mm tööpinge:3-13,8 V testitud:12V õhuvool:65 m3/h õhusurve:0,870 mm/H20 müratase:20,3 dBA kiirus:1800 RPM võimsustarve:1,32 W eestikeelne ülevaade:http://youtu.be/HnuOvu39nqk tootjalehel:http://www.blacknoise.com/en/products/it/16/Noiseblocker-NB_BlackSilentFan_92mm
The nickel-plated adapter from Bitspower in shiny silver has two G1/4 inch external threads. The adapter is rotatable, so that the screwing on is not unnecessarily complicated. Technical Data: Material: Nickel-Plated Brass Main Color: Shiny Silver Thread: G1/4" on both side Thread Length: 5mm
The adapter in white from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has a 90 degree angle and can be rotated on the thread for easier tube alignment. Technical Data: Material: Brass Colour: White Angle: 90 ° Thread: G1/4" and inner G1/4" Thread Length : 5 mm
The adapter in carbon black from Bitspower has a G1/4" external thread and a G1/4" internal thread. It has an angle of 90 degrees. Technical Data: Material: Brass Colour: Carbon Black Angle: 90 ° Thread: G1/4" and inner G1/4" Thread : G1/4" Thread Length : 5 mm Thread : Inner G1/4" Thread Length : 6 mm
The two clamp set is suitable for the equalizing tanks of the Z-series from Bitspower. They make it possible to mount the expansion tank individually inside or outside the case, also with the corresponding pump. The set contains two clamps each with four screws and nuts. The holders have an 80mm, 5mm high and 15mm deep base. The clamps themselves are 10mm wide, have an inside diameter of 60mm and an outside diameter of 66mm. Technical Data: Dimensions: 80 x 70 x 15 mm (W x H x D) Inner Diameter Clamps: 60 mm Outer Diameter Clamps: 66mm Material: Plastic Color: Black Compatibility: Bitspower water tanks of the Z-series
DEMCiflex Dust Filter 120mm White DF0688Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution, which in this case is suitable for 120 mm fans. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Firstly, it is easy to see if cleaning is necessary again - as soon as the white filter fabric has a gray haze, you should do this task. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate. Technical details:Size (frame): 128 x 128 mmSize (filter): 105 x 105 mmCompatibility: 120 mm fan slotMaterial (filter): polyester meshColor: white (frame), white (filter)Mounting: magnetic bracket + mounting frameAdvantages: Fast installation No compatibility restriction Easy and quick cleaning Effective filter effect with high air permeability Durable fabric
Alphacool's Eiszapfen series is future-oriented and characterized by excellent workmanship and high flow. Ball valves have always been a flow brake, making life difficult for each pump. Then, Alphacool has developed a ball valve represents no obstacle to a diameter of 10mm. The inside scoop closes absolutely tight, thus preventing further escape of liquid. On both sides all 1/4“ connections with a maximum thread length of 6mm can be screwed. This ball valve is available in two different color versions: Chrome and Deep Black. Technical Details: Dimensions (LxBxW): 35,4 x 36 x 22,7mm Color: Chrome Scope of delivery: Alphacool Eiszapfen 2-way ball valve G1 / 4 - Chrome
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®.(Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316, Dremel® - Art.No: 32196 and 32229) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 10/30cm WARNING:Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note:Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention:This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
The Black Ice® Nemesis® GTX radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
The connection for 16mm (AD) Hard Tubes from EK Water Blocks, is a compression fitting made of nickel-plated brass. It is silver in colour and comes from the Torque series, which convinces with a simple and timeless design. Originally intended for the EKWB Quantum series, this fitting is also compatible with other EK products. In this fitting, the union nut serves as a compression ring, which presses the sealing ring onto the hard tube. It thus offers a higher level of safety and sealing than, for example, the fittings of the EK-HD series. As a small feature, the union nut has a recess under which coloured rings are placed, which provide a bit of individuality and are available separately. Technical Data: Material: Nickel-Plated Brass Colour: Silver Supported Tube: 16 mm OD Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 24 mm Installed Height: 15 mm Compatible Solid Tubing: Acrylic, PETG, Copper, Brass, Stainless Steel
Tootekood: ROGSTRIXLCII240ARGBGTIN: 4711081145905Jahutid ja lisad
Water block dimention: 80 x 80 x 45 mm Block Material (CPU Plate): Copper Radiator Dimension: 121 x 272 x 27 mm Radiator Material: Aluminum Tube: Sleeved Rubber tube Tube Length: 380 mm Fan: ROG Designed ARGB Radiator Fan - Size: 2 x Fan Slots (120mm) - Dimension: 120 x 120 x 25 mm - Speed: 800 - 2500 RPM +/- 10% - Static Pressure: 5.0 mmH2O - Air Flow: 80.95 CFM / 137.5 m3h - Noise: 37.6 dB(A) - Control Mode: PWM/ DC AMD: AM4 Package Content: 1 x Liquid Cooler (pre-applied thermal compound) 2 x 120 mm ARGB Radiator Fan 1 x Accessory Pack of Screws and Brackets 1 x Quick Start Guide 1 x USB cable for software control 1 x 1-to-2 Fan Splitter Cable 1 x 1 to 4 ARGB spliter cable
240-mm-Radiator von Magicool, aus der G2-Ultra-Reihe mit 45 mm Dicke, für beidseitig 2x 120-mm-Lüfter, 13 FPI Lamellendichte für Silent-Fans, Dual-Pass-Design, Schwarz
Tootekood: R-AG400-BKLNMC-G-1GTIN: 6933412727583Jahutid ja lisad
The Deepcool CPU Cooler AG400 LED is a cooling system designed for Intel and AMD processors. It has a hydro bearing technology and a 4-pin PWM fan connector. The cooler has a maximum noise level of 31.6 dB and a maximum fan speed of 2000 RPM. It comes with a 2-year warranty and a black LED color.
Backplate mit aktiver Kühlung von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acryl-Deckel, adressierbare RGB-Beleuchtung
Full-Cover-Waterblock von EK Water Blocks, für EVGA XC3 RTX 3080 / 3080 Ti und 3090, vernickelter Kupferboden, Acetal-Deckel, adressierbare RGB-Beleuchtung
Effizienter 140-mm-PWM-Lüfter von SilverStone, Shark Force-Lüfterflügeldesign für geringere Geräuschemission und höhere Leistung, breiter Drehzahlbereich von 0 bis 2.200 U/min, modulares Kabelmanagement
Tootekood: CR-1400E ARGB WHITEGTIN: 6970620554815Jahutid ja lisad
Single tower cooler with cooling performance of up to 160 W TDP Four 6-mm heatpipes for rapid heat dissipation A 92 mm ARGB fan with PWM connector and hydraulic bearing Synchronizable, customizable ARGB lighting for your build Compact dimensions: 92 mm (L) x 66 mm (W) x 127 mm (H) High-performance thermal paste included High compatibility with AMD and Intel processors Innovative mounting system for easy installation The Jonsbo CR-1400E ARGB CPU cooler for Intel and AMD With the CR-1400E ARGB, you get a stylish and high-performance CPU cooler designed for ambitious gamers and overclockers. Its compact single tower design and four robust 6-mm heatpipes ensure that the heat from your CPU is quickly dissipated—even at a D-TDP of up to 160W. Thanks to the integrated ARGB lighting, you can also create visual highlights in your build. Jonsbo CR-1400E ARGB: Cooling performance with style The CR-1400E ARGB combines impressive cooling performance with a modern look. The 92 mm ARGB fan automatically adjusts to your CPU temperature thanks to the PWM 4-pin connector and reaches speeds from 800 to 2200 RPM. This delivers a maximum airflow of up to 64.9 m³/h, with air pressure up to 2.0 mmH₂O—perfect for effective yet quiet operation. Fan and performance data The powerful 92 mm ARGB fan, equipped with a durable hydraulic bearing, dynamically regulates its speed to ensure optimal airflow. With a maximum noise level of 33.8 dB(A), you stay in a quiet environment even during intense gaming sessions and overclocking scenarios. The precise adjustment via the PWM connector guarantees that the fan always perfectly adapts to your needs. Construction and accessories Four firmly integrated 6-mm heatpipes efficiently transfer your CPU’s heat to the compact aluminum heatsink, which ensures optimal airflow. The modern design of the CR-1400E ARGB not only enables perfect installation but also lets you express your personal style—thanks to the synchronizable ARGB lighting. Of course, high-quality thermal paste is also included for an excellent thermal connection between your CPU and the cooler.
The new generation of Alphacool NexXxoS radiators, a name that is known for experience and quality, is here to breathe new life into the radiator market!Everyone who uses watercooling needs a radiator, and everyone has different requirements for the heat exchanger. Naturally, consumers want the product that's best in class. The Alphacool NexXxoS radiators are here to challenge the best in their class, and be crowned the best radiators in every area and size. No more back and forth - with Alphacool NexXxoS radiators, you know what you're getting!Alphacool has been a trendsetter on the scene for developing and improving radiators for years. That's why these models are among the first radiators to really earn the descriptor "full copper"! All the main elements, not just the fins and channels, but also the channel heads are made of copper. Material-wise, this is a big advantage, and one where other radiators fall by the wayside. The Alphacool NexXxoS X-Flow radiators set themselves apart significantly from conventional radiators in their construction. The X-Flow radiators are built for high flow rates. The slanted copper chambers on either side are built identically. This means the water can flow through all the channels at the same time until it flows into the opposite chamber and leaves the radiator.Freedom in the installation is one of the central points on which Alphacool's development department focused. Both copper chambers have three 1/4" threads. That means connections can be attached on the top, bottom and at the front or back (not on the NexXxoS ST30). Fewer angles are needed, which increases the flow rate and offers more options in the installation. Here, too, Alphacool carries the standard sizes of the 120mm series. Different strengths, 30mm, 45mm and 60mm underscore the wide spectrum that these radiators cover. The installation of the radiators, as well as the fans and radiator faceplates, is easy to do with this series: the M3 threads are standard in the radiator sector, affordable and available in all lengths.Even the dreaded mishap of turning the screws in too deeply won't lead to costly damage with this radiator: an inner protective edge stops the screw before it can come into contact with the fins.The fin spacing was chosen so that the radiator could reach its optimal cooling performance even with slow or medium-speed fans. This is not only comfortable in terms of background noise, but also puts no constraints on the choice of fans. All in all, it's where experience and powerful performance meet with a forward-looking approach and sophisticated solutions.Alphacool NexXxoS Radiators - the one tool for all your cooling needs! Technical dataCooling channelsCopperColorblackFan threadM3SlatsCopperThickness39 - 49mmConnection2x G1/4"Lüftergröße140mm [7]Number of fans3HousingSteelManufacturerAlphacoolFins per inch16Pressure tested0,8 barQuantity of cooling channels28
