Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products. Make No Compromises, Use Copper.As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system. Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. CompactThe ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data:L x W x H: 132 x 92 x 25 mmFPI: 15 Material cooling fins: Copper Material chambers: Copper Material cooling channels: Copper Material threads: Brass Material outer housing: stainless steel G 1/4“ threads: 2 x For fan size: 92 mm Possible fan assembly: 1 x one-sided / 2 x both-sidedDownload data sheet PDF: Alphacool NexXxoS ST25 Full Copper 92mm Radiator
The next generation - The Alphacool Eisblock Aurora water cooler for Geforce RTX 4XXX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins. Technical Highlights The fin structure of this Eisblock cooler generation was developed together with Nvidia board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow. Chrome-plated copper The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers. Design The Aurora design of the Geforce RTX 4XXX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design. Thermal paste & thermal pads The included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK. Compatibility: - MSI GeForce RTX 4090 Suprim X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 4090 Suprim Liquid X 24G, 24GB GDDR6X, HDMI, 3x DP - MSI GeForce RTX 4090 Gaming Trio 24G, 24GB GDDR6X, HDMI, 3x DP Technical data cooler L x W x H 266,6 x 160 x 34,6mm Material cooler chrome-plated copper Material cooler top acrylic Threads 4 x G1/4" Thickness cooling fins 0,4mm Distance cooling fins 0,4mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 12 Technical data backplate L x W x H 266,6 x 127,25 x 6mm Material aluminium Color black
It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 660 W at an ambient temperature of 30°C and fans with 6500 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 284 x 80 x 60mm Net weight: 900g Maximum working temperature: 180°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 8x M3 threads Fan size: 80mm Fan slots: 3 single-sided / 6 double-sided Fan threads: M3 Pressure-tested: 1,5 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Triple Radiator Mounting material Datasheet Manual
AiO-Wasserkühlung im 240-mm-Format von Alphacool, mit ARGB-Lüftern, variable Pumpleistung, mit Schnellverschlüssen zur einfachen Aufrüstung, kompatibel zu aktuellen AMD & Intel Sockeln
With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel.Aluminium RadiatorCompared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU.Core fanThe fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system.Cooler & PumpAs with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored.Hoses & ConnectionsThe FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case.Illumination12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector.Thermal compoundThe thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility:AMD: AM4 / AM5Intel: LGA 1150 / LGA 1200 / LGA 1700 / LGA 2066 Technical data radiatorL x W x H153 x 120 x 38mmMaterial cooling fins, channels & prechamber3003 AluminiumMaterial outer housing & threads3003 AluminiumFins per Inch19Fan size120mmFan slots1 one-sided / 2 double-sidedColorblackTechnical data fansL x W x H120 x 120 x 25mmBearing Typehydraulic BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.23 (Max. 0.4) ARated Power2.76 (Max. 4.8) WRated Speed0 - 2500rpm/min (±10%)Max. Air Flow62.8CFMMax.Static Pressure2.13mm-H2ONoise level (rated voltage, mute room, distance 1m)33.0 (Max. 34.3) dBAMTBF50000hrs at 25°CSpeed Control ModePWMConnection & control4-pin PWM (cable 40cm)Auto-RestartyesTachometer OutputyesColorblackTechnical data cooler & pumpL x W x H70,2 x 70,2 x 46mmMaterial cooler bottomcopperMaterial pump housingSynthetic material (ABS+PC)Fin structure cooler bottom0,1 x 0,1mmMaterial pump bearing & shaftceramicsStarting voltage> DC 6VRated power7.1WNoise level35DbRated Current0.59A (±10% MAX)Speed2500~3500 (±10% RPM)Power supply Digital aRGB3-pin 5V (male & female, cable length 30cm)Number of aRGB LEDs12Power supply pump4-Pin JST (Kabellänge 30cm)Technical data tubesMaterialFEP, black with weave coverLength350mmWarranty: 3 years???? Warranty Terms
The CORSAIR RS120 MAX case fan is designed for enthusiasts seeking to enhance their system's performance while maintaining quiet operation. It features CORSAIR AirGuide technology, magnetic dome bearing, and PWM support for precise airflow control. With an airflow range of 16.5 - 72 cfm and a noise level kept between 10 - 29.5 dBa, it ensures your system remains cool and quiet, even under heavy load. The inclusion of Zero RPM fan mode further reduces noise during low-load operations, making it an ideal choice for high-performance computing environments. Whether you're gaming, creating, or working, the RS120 MAX provides the cooling efficiency and quiet operation your system needs.
Hard Tube Fitting von EK Water Blocks, für Röhren mit 12 mm AD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, mit optionalen Ringen farblich individualisierbar
The new fittings from Alphacool’s Enterprise Solutions series were specially developed for the Alphacool TPV tubing. The metal connection can be tightened with the TPV hose and has a very high tensile strength. Technical Data: Material: Brass/Aluminium Colour: Black Length: 24 mm Diameter: 18 mm Thread: G1/4" Hose size: 12,7 / 7,6 mm
CORSAIR Hydro X series XF Fitting Adapters make it easy to add Y splits, 45° or 90° angles to your custom cooling system's tubing, whether you use hardline, compression or barbed fittings.
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The slanted edges of the nut make sure the O-ring sits tight against the HardTube, so that it is even more secure than in its predecessors. This provides more security in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Compression Fitting 16mm This connector has a 1/4" outer thread. The other side fits HardTubes with an outer diameter of 16mm. Technical Details Material: brass Colour: chrome Dimensions Diameter: 21mm Height: 18mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - chrome sixpack
The Alphacool Eiszpafen connection terminal with 4x G1/4" internal threads offers versatile possibilities to expand the water circuit with different components. Material and patented sealing plugsIn order to save as much weight as possible, the connection terminal is made entirely of acetal, resulting in a total weight of only 20g. Two sealing plugs made of acetal included. To keep the design of the cube-shaped adapter even on all sides, Alphacool uses the patented sealing plugs. These close flush to the surface and are already in use with some Alphacool products.What can I do with it?With such an adapter, parallel circuits can easily be realised. Or you can use it to integrate a drain tap into the circuit. Of course, temperature sensors can also be mounted on it. It is also possible to split and merge circuits. You can also simply use the adapter as a fancy elbow. The possibilities are extensive.Technical dataL x W x H:26,5 x 26,5 x 26,5 mmWeight: 20 gMaterial: AcetalConnection: 4x G1/4“ inner threadDownload Datasheet PDF: ENG_1019900_Alphacool_Eiszapfen_connection_terminal__black_Acetal_data_sheet.pdf
The Low Profile ES L-connector from Alphacool's ENTERPRISE SOLUTIONS series with 1 G1/4" male thread and 1 G1/4" female thread offers the possibility to connect components like GPU and CPU coolers, reservoirs or radiators into a water circuit even in the tightest server case.UseThe Low Profile ES L-connector can be rotated 360°. Compared to Alphacool's conventional L-connectors, rotation is not made possible by turning the connector itself, but by a recessed, freely rotatable plug with a screw slot on the threaded opposite side of the connector. With the help of a screwdriver or the plug-in tool from Alphacool, the integration of water cooling elements is simplified, as the connector itself no longer needs to be rotated. The positioning of the connector is done using the adjustment options on the plug itself. This is particularly advantageous in tight server housings with little space available. The position of the Low Profile ES L connector can also be easily adjusted or changed later on in this way.VariantsThe Low Profile ES L connector is available in either brilliant chrome or matt black. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector has the Alphacool logo, which along with their distinctive shape makes them unmistakable! Replacement O-rings in three different colours are included. Technical dataMaterialbrassL x W x H31 x 23,5 x 18,5mmThreads1x G1/4" OT | 1x G1/4" ITThread lengthsOT 3,5mm, IT 5mmPossible rotation360°Version90° angledWeight65gColorblack
