Are you tired of your unused fitting ports looking ugly due to protruding stop fittings? Have you miss-placed the original stop fittings that came with your Alphacool products? Then Alphacool has exactly the right solution for you with its patented flush stop fittings! The fitting is screwed in to the block or radiator to create a completely flat surface. This ensures an elegant look. Note: Only compatible with the Alphacool NexXxos radiators of the V.2 series and the Alphacool GPX Aurora series.
The Alphacool ES 1-Slot Copper/Carbon water cooler with backplate was specially developed for the Alphacool Enterprise Series. Due to the positioning of the connections, the tubing of the cooler in the server rack is made much easier. The cooler top and the backplate are made of carbon. This makes the water cooler lighter compared to Alphacool's ice blocks with acetal or acrylic top. This cooler is 1U compatible! More performance! Alphacool succeeds in positioning the cooler as close as possible to the components to be cooled. To do this, the thermal pads used are reduced to a thickness of 1mm. The maximum possible reduction in the thickness of the copper block and the optimization of the water flow within the cooler allow all important components such as the GPU, voltage converter and VRAMs to be cooled much better and more effectively by the water. All of this ensures a significant increase in cooling performance. Chrome-plated copper The cooler is made entirely of chrome-plated copper. Chrome plating is much harder than nickel plating and is therefore less susceptible to acids, scratches and damage. The risk of nickel plating chipping off is completely eliminated. In addition, chrome plating looks much more homogeneous and offers a shine that cannot be achieved with nickel plating. Connections on the back? In order to save space in terms of width and height during installation, the inlet and outlet were moved to the rear of the cooling block. This positioning of the connections makes the tubing much easier and enables the GPU cooler to be easily integrated into the water circuit, even in the tightest server cases. Copper or aluminum? Alphacool uses only copper for all water-carrying parts. Copper has almost twice the thermal conductivity of aluminum and is therefore the much better choice of material for water cooling. The chrome-plated copper base is highly acid-resistant, which means that the chrome plating cannot chip off. Thermal paste & thermal pads The electrically non-conductive thermal paste is particularly well suited for high contact pressures, but can still be processed perfectly due to the viscosity of 850,000 TF. For the thermal pads, Alphacool uses soft pads that fit perfectly to the components to be cooled and are very durable. Compatibility: - Inno3D GeForce RTX 4090 iCHILL Black, 24GB GDDR6X (C4090-246XX-18330005) - Inno3D GeForce RTX 4090 iCHILL OC, 24GB GDDR6X (C4090-246XX-1833FB) - Inno3D GeForce RTX 4090 OC, 24GB GDDR6X (C40903-246XX-1833VA47) - Inno3D GeForce RTX 4090 X3 OC, 24GB GDDR6X (N40903-246XX-18332989) - KFA² GeForce RTX 4090 SG (1-Click OC), 24GB GDDR6X (49NXM5MD6DSK) Technical data cooler Dimensions (L x W x H) 234.21x119.69x19.29mm Height of the backplate 1 mm Weight (total) 1120g Radiator base material chrome-plated copper Material radiator top Carbon connections 2xG1/4" Maximum operating temperature 60°C Pressure tested 8 bars Color Black/Carbon Warranty: 3 years ? Warranty conditions
Alphacool's Core 120mm is a quiet and efficient fan with a wide control range up to 3000 rpm. The PWM controllable fan is not only suitable as a fan on CPU coolers or radiators. Due to its excellent performance values (throughput & static pressure), it can also be used as a case fan. The double-bearing fan axis is smooth running and enables a long service life as well as quiet operation. If you are looking for a powerful fan without aRGB illumination, you will find it in Alpacool's Core 120mm model!ConnectionsThe fan is controlled via a 4-pin PWM connector. The cable is 40cm long. This allows the fan to be connected directly to the motherboard or a dedicated controller without the use of additional adapter cables or extensions.Control rangeThe fan can be controlled from 0 to 3000 rpm via the 4-pin PWM connector. At maximum speed, it allows an airflow of 93.6 CFM combined with a high static pressure of 7.83mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system or for ventilating a case. Technical dataDimension (L x W x H)120 x 120 x 25mmMaterialsynthetic material (PBT UL94V-0)Bearing TypeTwo Ball BearingRated VoltageDC 12VOperating VoltageDC 7-14VStart-up Voltage7VRated Current0.25 (Max: 0.38) ARated Power3.0 (Max: 4.56) WRated Speed0 - 3000 rpm ±10%Max. Air Flow93.6 CFMMax. Static Pressure7.83mm-H2ONoise level43.0 (Max:45.0) dBALife Expectance70000 h at 40 degrees celciusConnection4-Pin PWMSpeed Control Modevia PWMOperating Temperature-10~+70 degrees celciusOther FeaturesTachometer Output, Auto Start, Soft Start, Waterproof Level IP22Warranty: 3 years???? Warranty Terms
Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue
Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 0,5mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue
Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 2mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue
Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 3mmThermal Conductivity (ASTM D5470)6.2 W/mK (±10%)Hardness (ASTM D412)50 (Shore 00) (±15)Working temperature-50 to ~150°CVolume Resistance (ASTM D257)1×10¹³ Ohm-mDielectric Breakdown Voltage (ASTM D149)6 KV/mm (±10%)Density (ASTM D792)3.1 g/cm³ (±10%)Elongation (ASTM D412)50%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorblue
Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 1,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0ColorpinkElongation (ASTM D412)40%
Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)100 x 100 x 2mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Elongation (ASTM D412)40%Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0Colorpink
The Alphacool Core Reservoir not only looks sleek with its aRGB lighting, but can also be used flexibly thanks to its compact size. The reservoir is made entirely of acrylic. The installation of a D5 or VPP pump is required for operation. Due to its compact design, the Core Reservior also fits into small cases.Core DesignA key element of Alphacool's Core Design series are the chrome-plated G1/4" connections made of brass. In the Core Reservoir, the connections are recessed rather than screwed into a thread, bypassing the problem of possible leaks due to cracking from the direct screwing of the connections into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when mounted in the acrylic. This not only ensures absolute sealing of each connection, but also allows for the clear and functional appearance of the Alphacool Core Design series.Easy installationWith the included Core Push Mounting kit, the Core Reservoir can be mounted on the case or on a radiator. The metal pins are attached to the radiator or case panel and the matching female sleeves are attached to the Reservoir (see manual). In the next installation step, the Reservoir is simply and tool-free pushed onto the pins. Alphacool's Push-Mounting allows for a secure fit of the reservoir on the case panel or on the radiator and allows for easy disassembly for maintenance or expansion projects.GamechangerThe Core Reservior is small and compact. This makes the reservoir ideal for custom water loops. An additional drain port is located on the side, allowing for easy and uncomplicated draining of the Reservoir.High-quality material selection & brilliant lightingAlphacool's Core Reservoir is made of high-quality acrylic glass, allowing for an unobstructed view of the coolant and brilliant illumination by the built-in digital addressable aRGB LEDs. The lighting can be controlled via a digital aRGB header on the motherboard or optionally through Alphacool's Aurora Eiscontrol aRGB controller (item number: 15360). Technical dataDimensions (L x W x H)120.00 x 125.00 x 45.00mmVolume (reservoir)approx. 65mlMaterialAcrylPump compatibilityD5/VPPThreads4x G1/4“ inner thread / 1x drain portMaximum working temperature60 °CPressure tested0.8 BarQuantity digital aRGB LEDs6Voltage digital aRGB LEDs5VPower connection digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight660gColortransparentWarranty: 3 years???? Warranty Terms
The Alphacool Core Reservoir not only looks sleek with its aRGB lighting, but can also be used flexibly thanks to its compact size. The reservoir is made entirely of acrylic. The installation of a D5 or VPP pump is required for operation. Due to its compact design, the Core Reservior also fits into small cases.Core DesignA key element of Alphacool's Core Design series are the chrome-plated G1/4" connections made of brass. In the Core Reservoir, the connections are recessed rather than screwed into a thread, bypassing the problem of possible leaks due to cracking from the direct screwing of the connections into the acrylic. The connections are in two parts, fitted with an O-ring and counter each other when mounted in the acrylic. This not only ensures absolute sealing of each connection, but also allows for the clear and functional appearance of the Alphacool Core Design series.Easy installationWith the included Core Push Mounting kit, the Core Reservoir can be mounted on the case or on a radiator. The metal pins are attached to the radiator or case panel and the matching female sleeves are attached to the Reservoir (see manual). In the next installation step, the Reservoir is simply and tool-free pushed onto the pins. Alphacool's Push-Mounting allows for a secure fit of the reservoir on the case panel or on the radiator and allows for easy disassembly for maintenance or expansion projects.GamechangerThe Core Reservior is small and compact. This makes the reservoir ideal for custom water loops. An additional drain port is located on the side, allowing for easy and uncomplicated draining of the Reservoir.High-quality material selection & brilliant lightingAlphacool's Core Reservoir is made of high-quality acrylic glass, allowing for an unobstructed view of the coolant and brilliant illumination by the built-in digital addressable aRGB LEDs. The lighting can be controlled via a digital aRGB header on the motherboard or optionally through Alphacool's Aurora Eiscontrol aRGB controller (item number: 15360). Technical dataDimensions (L x W x H)140.00 x 145.00 x 62.00mmVolume (reservoir)approx. 130mlMaterialAcrylPump compatibilityD5/VPPThreads3x G1/4“ inner thread / 1x drain portMaximum working temperature60 °CPressure tested0.8 BarQuantity digital aRGB LEDs5Voltage digital aRGB LEDs5VPower connection digital aRGB LEDs3-Pin JST + 3-Pin 5VWeight840gColortransparentWarranty: 3 years???? Warranty Terms
Push-in fitting from EKWB, for EK-Quantum Reflection² Distroplates, with 4.5 mm external thread length, with two G1/4-inch threads, made from gold-coated brass
Alphacool's performance thermal pad can be used to cool electronic components of all kinds where it is essential to effectively dissipate waste heat. In addition to voltage converters and VRAMs on graphics cards, electronic components of Playstation and Xbox game consoles can also be cooled, greatly improving their performance and durability.Better than standard thermal pads?The silicone-based Soft heat conduction pad is characterized by optimal compressibility. Due to its low hardness and a natural stickiness, the Core thermal pad adapts perfectly to surfaces, compensates for unevenness between components and thus ensures a significant improvement in heat transfer.Increased service life!The special material composition of the Core thermal pad reduces the risk of silicone bleeding. It can be used for a substantially longer period of time than conventional heat conduction pads without significantly losing performance.Versatile use!Due to its excellent electrical insulation (electrically non-conductive), Alphacool's thermal pad can also be used to cool electronic components in electric vehicles, autopilot systems, cell phones, servers, motherboards, power supplies, LCD TVs, notebooks, telecommunication devices, access points, memory modules, etc. Technical data thermal padDimensions (L x W x H)40 x 40 x 0,5mmThermal Conductivity (ASTM D5470)9.0 W/mK (±10%)Hardness (ASTM D2240)50 (Shore 00) (±15)Working temperature-50 to ~180°CVolume Resistance (ASTM D257)1×10¹² Ohm-mDielectric Breakdown Voltage (ASTM D149)≥8 KV/mmDensity (ASTM D792)3.2 g/cm³ (±10%)Weight Loss (ASTM E595)less than 1%Flame Rating (UL 94)V-0ColorpinkElongation (ASTM D412)40%
Tootekood: CR-1400V2ARGBBLACKGTIN: 6970620553603Jahutid ja lisad
Black CPU cooler with four heat pipes, stylish RGB lighting, ARGB fan with 2,200 RPM, compatible with Intel and AMD Extremely powerful single tower cooler Four 6-mm heat pipes 1x PWM fan in 92-mm format High compatibility with AMD and Intel Controllable A-RGB lighting The Jonsbo CR-1400 V2: strong cooling The Jonsbo CR-1400 V2 cooler offers extremely high cooling performance with its four advanced heat pipes and A-RGB PWM fan. It reaches up to 2,200 revolutions per minute and remains pleasantly quiet despite this speed. Nevertheless, it does not lose cooling performance, ensuring a perfect balance. Elegant design and maximum compatibility The CPU cooler impresses with its appealing and sleek design. It is compatible with common Intel and AMD sockets, giving you more freedom in choosing your CPU. The A-RGB lighting is controllable via various programs, allowing you to easily connect the CPU cooler to any motherboard.
Cooler for M.2 SSDs Simple and functional design Compatible with 2280 SSDs Easy installation Jonsbo M.2-6: Cooler for SSDs M.2 SSDs also tend to overheat. This reduces transfer speeds and can cause longer loading screens in games or slower boot times for your computer. With the M.2-6 from Jonsbo, this problem is solved, as it cools your SSD. Simple design The design is kept simple. The cooler is compatible with 2280 M.2 SSDs and can be installed quickly and easily.
The Jonsbo NF-2 was developed to efficiently regulate the temperature of your RAM modules, ensuring optimal performance and stability. Excellent cooling for your memory The integrated RGB lighting allows you to customize your setup and give your PC an impressive look. Thanks to the quiet fans and high-quality materials, this cooler is both powerful and durable. Enhance your gaming or work setup and benefit from the increased performance of your system with the NF-2 RAM cooler with two fans and RGB lighting.
Wireless with long battery life - Up to 15 hours of cool, rechargeable via USB-C; Adjustable height - From a 34 cm table fan to a 75 cm floor model; Wide cooling range - 90° horizontal oscillation and 35° vertical tilt
Tootekood: CR-1000 MAX ARGB BLACKGTIN: 6970620554785Jahutid ja lisad
Single tower cooler with up to 220 W TDP cooling capacity Six 6-mm heat pipes and optimized cooling fins One 120 mm PWM fan with dynamic speed control Asymmetric design for high RAM compatibility High-performance thermal paste included High compatibility with processors from AMD and Intel Innovative mounting system for easy installation Integrated ARGB lighting on fan and cooler The Jonsbo CR-1000MAX CPU cooler for Intel and AMD With the CR-1000MAX, you’re getting a true performer when it comes to cooling—ideal for demanding and intensive gaming sessions. This single tower cooler provides a large heatsink with aerodynamically optimized fins that efficiently dissipate your processor’s heat. Together with the six 6-mm heat pipes and included 120 mm PWM fan, you achieve outstanding cooling performance. Thanks to the innovative mounting system, installation in systems with tall RAM modules is a breeze. Jonsbo CR-1000MAX Standard: Ice cold and whisper-quiet The perfectly tuned cooling towers of the CR-1000MAX Standard are tailored precisely to your needs. The aerodynamically optimized fins ensure especially quiet operation—perfect if you want power even in quiet environments. The 120 mm PWM fan with its hydrodynamic bearing precisely regulates speed between 600 and 1,500 RPM and ensures a minimal noise level of about 22-28 dB(A) even under full load. Fan and performance data The integrated 120 mm PWM ARGB fan connects directly to your motherboard via a PWM header. Thanks to dynamic speed control, it automatically adapts to the CPU temperature and provides a maximum airflow of about 94 m³/h. This efficiently dissipates heat even under the highest loads—just what you expect from a high-end cooler. Design and accessories Six heat pipes integrated into the copper base quickly and efficiently transfer your processor’s heat to the heatsink. The large aluminum heatsink with its aerodynamically optimized fins maximizes the cooling surface and ensures optimal air circulation in your system. The asymmetric design of the cooling tower also provides enough space for densely packed RAM modules. High-quality thermal paste is included, ensuring perfect thermal contact between your CPU and the cooler.
Tootekood: R-LQ360-BKLSMW-G-1GTIN: 6933412729167Jahutid ja lisad
DeepCool LQ 360 AIO Liquid Cooler: High-Performance Cooling with Innovative Display The DeepCool LQ 360 AIO Liquid Cooler offers a compelling blend of robust cooling and innovative aesthetics, designed for users who demand both performance and visual flair from their PC components. Featuring a 360mm radiator, advanced pump technology, and a unique segment LCD screen, the LQ 360 aims to elevate the AIO cooling experience. Key Features: Powerful 360mm Radiator: The large 360mm radiator provides substantial surface area for heat dissipation, ensuring efficient cooling even for power-hungry CPUs under heavy load or during overclocking. 5th Generation Pump: DeepCool's 5th generation pump is engineered for enhanced performance and reliable coolant circulation, facilitating effective heat transfer. Anti-Leak Technology: DeepCool incorporates its patented Anti-Leak Technology to improve the overall durability and safety of the AIO, reducing the risk of leaks and system damage. Segment LCD Screen: A prominent feature of the LQ 360 is its unique segment LCD screen integrated into the pump housing, offering real-time monitoring of crucial system information. ARGB Lighting: Both the fans and the pump unit are equipped with addressable RGB lighting, allowing for customizable and synchronized lighting effects within your PC build. FD12 ARGB Fans: The included FD12 ARGB fans are designed to deliver a balance of static pressure for radiator fin penetration and airflow for efficient heat removal, while maintaining relatively quiet operation. Efficient Connectivity: A streamlined 8-pin one-to-three cable is used for fan and lighting connections, simplifying cable management within the case. Wide Socket Compatibility: The LQ 360 supports a range of current CPU sockets from both Intel and AMD, ensuring broad compatibility with modern processor platforms. Technical Specifications (Example): Radiator Size: 360mm Fan Type: 3x 120mm FD12 ARGB Fan Speed: 500~2150 RPM ±10% Fan Connector: 4-Pin PWM Pump Connector: 3-Pin Socket Compatibility: Intel: LGA 1700 / 1200 / 115x / 1851 AMD: AM5 / AM4 Noise Level (Fan): ≤32.9 dB(A) LCD Screen: Segment LCD Package Contents: DeepCool LQ 360 AIO Liquid Cooler Mounting Kit for Intel and AMD platforms Thermal Paste Necessary cables
The Gelid Solutions TP-GP04-R-C heat sink compound thermal pad is an efficient solution for thermal management. With a height of 1.5 mm, this thermal pad is designed to provide optimal heat dissipation for your electronic components. It is backed by a G36 warranty, ensuring reliability and peace of mind. Ideal for enhancing thermal performance, this pad is a must-have for maintaining the longevity and efficiency of your devices.
The Gelid Solutions TP-GP04-R-B is a high-quality thermal pad designed to efficiently transfer heat from electronic components to heat sinks. With a height of 1mm, it is perfect for a variety of applications where a reliable thermal interface is needed. This thermal pad is a part of Gelid's range of thermal management solutions, ensuring optimal performance and longevity of your devices. It comes with a G36 warranty, providing peace of mind for your purchase.
Alphacool Dual-Flow radiators were developed specifically for use in servers. The ability to run two separate loops through one radiator is unique. There are also advantages to using them in a single loop as you can split the cooling surface and use it directly behind hotspots.What does dual flow mean?The water flow in a classic radiator is in a U-shape. Water is introduced on one side, runs once through half of the radiator before turning around and running back through the other half. The outlet is on the same side as the inlet. In an X-Flow radiator, the water flows once from left to right completely through the radiator. The inlet and outlet are on opposite sides. With the Dual-Flow Radiator, the water flows from one side to the other just like the X-Flow. However, the Dual-Flow Radiator is divided in the middle. You could also say the Dual-Flow Radiator is nothing more than two small X-Flow Radiators in one.What are the advantages?In most server racks, space is extremely limited and being able to do fancy loops is not usually an option. Due to this you can utilise the radiator to simplify the loop and reduce the amount of tubing needed. In some test scenarios, we have even seen an increase in performance from the loop due to this method too.Many connection and mounting optionsThe radiator offers 3 connection options at each input and output. In total, the radiator has 12x G1/4" connections. Thus, versatile mounting requirements can be met. The radiator comes with all screws for mounting inside a case or server rack and for mounting the fans. Additional screws are usually not needed. There is also a protective plate between the mounting holes and the cooling fins. This is to prevent overly long screws from damaging the cooling fins and cooling channels.Choice of materialsAlphacool is the only manufacturer in the world to use only copper in all water-carrying parts in the radiator. The pre-chambers and the cooling channels are made of copper. The connection threads are made of brass and the cooling fins are also made of copper. Only the side parts to protect the cooling fins are made of sheet steel. Technical dataL x W x H415 x 125 x 60 mmQuantity of cooling channels36Material cooling finscopperMaterial cooling channelscopperPrechamber materialcopperMaterial outer housingsteelFins per Inch12Threads12x G1/4“Thread size fan mountingM3Fan size120 mmFan slots3 one-sided / 6 double-sidedPressure tested0,8 barMax working temperature60 °CWeight1537 gColourSchwarz
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical DataDimensions (L x W x H)157 x 144 x 30mmQuantity of cooling channels14Cooling channelsCopperColorblackFan threadM3Number of fans1SlatsCopperConnection2x G1/4"HousingSteelManufacturerAlphacoolThickness29 - 39mmFins per inch16Pressure tested0,8 barFan size140mm
For more than a decade, Alphacool has dominated the market with its Full Copper radiator series. Our extensive portfolio of radiator variants is unique worldwide, just like our manufacturing process, which enables us to craft all water-bearing parts and cooling fins from pure copper. Thanks to their exceptional performance, these radiators can effortlessly dissipate even extremely high waste heat, making them indispensable in many sectors of the cooling industry.The next step in evolution: HPE Full Copper Radiator!The Full Copper HPE Radiator uses the same materials as the previous NexXxoS models but takes a technical step forward. With a denser internal structure, the number of water channels and copper fins has been increased. This design ensures a larger water volume is in direct contact with the cooling fins, significantly enhancing heat transfer. The increased number of fin rows and their shortening also results in a much more efficient utilization of the cooling surface. Comparison tests with the conventional NexXxoS radiator have demonstrated that the HPE radiator can achieve a performance improvement of 4.5K. At higher ambient temperatures and fan speeds, the performance gap between the HPE and standard NexXxoS radiators increases progressively, with possible performance gains of up to 6K.Connection options & mountingThe HPE radiator features two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side, there is a fill or drain port for filling and draining the water circuit. The radiator comes with all necessary screws for case and fan installation. Additional screws are typically not required.Safety firstThe HPE radiator is equipped with special protective plates beneath all mounting holes to prevent screws from being inserted too deeply. This ensures the cooling fins and water channels underneath are protected from damage.Patented screw plugsAll HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often prevent the radiator from being installed flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface, allowing for easy and seamless installation in the case. Technical dataDimensions (L x W x H)314.5 x 144 x 45mm (+/- 3%)Quantity of cooling channels28Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size140mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0.8 BarMaximum working temperature60°CFin density16 FPIWeight1130gColorwhiteWarranty: 10 years???? Warranty Terms
