Adressierbare Wing-Boost-3-Lüfter von Alpenföhn, Triple-Set mit 3x 120 mm, digital adressierbare RGB-LED-Beleuchtung (3-Pin), PWM-gesteuert, inklusive Fernbedienung, Empfänger, Splittern & Schrauben
Adressierbare Wing-Boost-3-Lüfter von Alpenföhn, Triple-Set mit 3x 120 mm, digital adressierbare RGB-LED-Beleuchtung (3-Pin), PWM-gesteuert, inklusive Fernbedienung, Empfänger, Splittern & Schrauben
Improved Cooling Performance by New Production Process The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity. Wide RPM Range The Alpine 23 CO features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed. Lower Power Consumption & Minimum Vibration The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance. For Continuous Operation The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Pre-applied MX-2 Thermal Paste The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation. Easy and fast Installation Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight. Technical Data Compatibility AMD Socket: AM4 Ram Clearance: unlimited Warranty: 6 Years Heatsink Outer Diameter: 93.4 mm Fin Material: Aluminum Number of Fins: 50 Y-shaped Fins Thermal Paste: MX-2 pre-applied Fan Fan Diameter: 90 mm Fan Speed: 100 - 2000 rpm Fan Bearing: Dual Ball Bearing Noise Level: 0.3 Sone Current: 0.06 A Connector: 4-Pin Size & Weight Lenght: 98.6 mm Width: 121 mm Height: 65 mm Weight: 275.5
Leistungsstarke AIO-Kühlung in Weiß, in Zusammenarbeit mit Roman "der8auer" Hartung, mit 360-mm-Radiator, drei Wing Boost 3 ARGB High Speed 120-mm-Lüfter, schickes Design & leiser Betrieb, mit Thermal Grizzly Hydronaut Wärmeleitpaste, kompatibel zu vielen AMD & Intel Sockeln
Leistungsstarke AIO-Kühlung in Weiß, in Zusammenarbeit mit Roman "der8auer" Hartung, mit 240-mm-Radiator, zwei Wing Boost 3 ARGB High Speed 120-mm-Lüfter, schickes Design & leiser Betrieb, mit Thermal Grizzly Hydronaut Wärmeleitpaste, kompatibel zu vielen AMD & Intel Sockeln
Tootekood: R-AK400-BKNNMD-G-1GTIN: 6933412727798Jahutid ja lisad
Intel: LGA1700/1200/1151/1150/1155 AMD: AM5/AM4 Product Dimensions: 127×123×155 mm Heatsink Dimensions: 120×45×152 mm Net Weight: 802 g Heatpipe: diam. 6 mm×4 pcs Fan Dimensions: 120×120×25 mm Fan Speed: 500~1650 RPM±10% Fan Airflow: 59.46 CFM Fan Air Pressure: 1.62 mmAq Fan Noise: less than 28 dB(A) Fan Connector: 4-pin PWM Bearing Type: Fluid Dynamic Bearing Fan Rated Voltage: 12 VDC Fan Rated Current: 0.1 A Fan Power Consumption: 1.2 W
Mit Scharm und Reserve - In unser flottes M.2 NVMe/NGFF SSD Gehäuse G-M202-AC-10G wird Deine M.2 SSD ganz ohne Werkzeug installiert. Zusätzlich bietet unser Gehäuse noch Schutz und Unterschlupf für eine weitere M.2 SSD in der integrierten Aufbewahrungsbox. SCHNELLE ÜBERTRAGUNGSRATE | Unterstützt PCIe 3.0 x2 Datentransferraten von bis zu 10 Gbit/s | Unterstützt SATA III Datentransferraten von bis zu 6 Gbit/s CHIPSATZ | RTL9210B-CG | für breite Kompatibilität BREITE KOMPATIBILITÄT | Unterstützt PCIe NVMe M.2 SSD mit M-Key und M.2 SATA NGFF SSD mit B-Key & M+B Key FLEXIBLER M.2_EINBAU | Unterstützt M.2 SSDs der Längen 2230, 2242, 2260, 2280 EINZIGARTIGES DESIGN | Schutzbox als Aufbewahrungsbox für eine weitere M.2 SSD EINFACHE INSTALLATION | Werkzeuglos MEHRFACHE ZUBEHÖRE | 5x Wärmeleitpads, 2x Fixierer, 1x Type-C zu Type-C Kabel, 1x Type-A zu Type-C Kabel, 1x Handbuch, 1x Garantiekarte Technische Details: Produktabmessungen: 10.7 x 4.3 x 2.2 cm; 190 Gramm Lieferumfang: 5x Silikon Wärmeleitpad, 1x Type-C® to Type-C® Kabel, 1x Type-C® to Type-A Kabe, 2x Silikon-Fixierung
Pure Loop 2 FX 280mm is the impressively high-performing and silent All-in-One water cooling unit with impressive ARGB illumination for slightly overclocked systems. Impressively high cooling performance for all consumer CPUs 2 Light Wings 140mm PWM high-speed fans offer equally high air pressure and vibrant ARGB illumination Doubly decoupled PWM pump for quiet operation and minimal vibration ARGB-PWM-Hub enables synchronization of up to 6 ARGB components and PWM fans Combination of ARGB illumination, all-black design and aluminum-style for unmistakable and stylish look Easy-to-access refill port and included coolant bottle guarantee a long lifespan PURE LOOP 2 FX 280mm Liquid, LGA1150/LGA1151/LGA1155/LGA1200/LGA1700/LGA2011-3/LGA2066/SAM4/SAM5 Fan speed 2200rpm, Fan light Noise level, max 32.8 dB, Dimensions 317 x 140 x 52mm Weight 1.29 kg
With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 460 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 3 one-sided / 6 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm
Tootekood: R-AG620-WHANMN-G-2GTIN: 6933412727835Jahutid ja lisad
Leistungsstarker Dual-Tower-Kühler, integrierte A-RGB-Beleuchtung, zwei 120-mm-PWM-Lüfter mit A-RGB-LEDs, TDP von 260 Watt, hohe Kompatibilität zu Intel- und AMD-Sockeln
ROG RYUO III 360 ARGB WHITE EDITION ROG Ryuo III 360 white edition all-in-one liquid CPU cooler with Asetek 8th gen pump solution, Anime Matrix™ LED Display and ROG ARGB cooling fans - The latest 8th gen Asetek pump is armed with a 3-phase motor that delivers ultimate cooling performance with higher flow and lower impedance - The ASUS-exclusive Anime Matrix™ is a mini LED array that can display ROG-exclusive anime content, core system stats, and customized animations - Premium ROG ARGB fans offer high airflow and optimized noise levels - Aluminum components and vacuum coating provide high durability and flagship aesthetics - The ROG Ryuo series is styled to complement the ROG motherboards at the heart of a high-end build
The Enermax ELC-LMF-360-SF LiqMaxFlo SR is a high-performance AIO (All-In-One) CPU cooler designed to keep your system running cool and efficient. With a net weight of 2.42 kg, it offers robust cooling capabilities for demanding computing tasks.
Leistungsstarker CPU-Kühler, asymmetrisches Tower-Design, sechs 6-mm-Heatpipes, 1x leiser JetStream-Lüfter mit PWM-Anschluss, hohe Kompatibilität zu Sockeln und RAM, 220 Watt TDP
The CORSAIR RS120 MAX case fan is designed for enthusiasts seeking to enhance their system's performance while maintaining quiet operation. It features CORSAIR AirGuide technology, magnetic dome bearing, and PWM support for precise airflow control. With an airflow range of 16.5 - 72 cfm and a noise level kept between 10 - 29.5 dBa, it ensures your system remains cool and quiet, even under heavy load. The inclusion of Zero RPM fan mode further reduces noise during low-load operations, making it an ideal choice for high-performance computing environments. Whether you're gaming, creating, or working, the RS120 MAX provides the cooling efficiency and quiet operation your system needs.
SWAFAN EX14 ARGB brings magnetic force design to ARGB fans while keeping the iconic swappable fan blade design. Daisy-chaining up to 3 fans per cable improves fan connection efficiency and convenience while enhancing cable management for PC building.
