Improved Cooling Performance by New Production Process The high thermal conductivity of aluminum is fully retained by a new type of extrusion. This new production process creates a powerful yet very compact radial heat sink. The particularly thin cooling fins of the new Alpine are fanned out in a Y-shape. This increases the surface area of the heat sink and therefore the cooling capacity. Wide RPM Range The Alpine 23 CO features a new motor technology with a very wide, PWM-controlled RPM range. This keeps the noise level at a minimum while guaranteeing maximum cooling performance when needed. Lower Power Consumption & Minimum Vibration The new Alpine 23 is powered by an updated motor and runs much more efficiently than its predecessors. Due to sinus-magnetizing the new motor creates just 5 % of the vibration from commutation of a regular DC-motor. These factors contribute towards saving energy, lowering the coil temperature and reducing vibrations to a minimum without compromising performance. For Continuous Operation The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential. Extended Life Span A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Pre-applied MX-2 Thermal Paste The pre-applied, high-performance MX-2 thermal compound ensures fast and clean installation. Easy and fast Installation Thanks to the mounting clips, the installation is really easy. Alpine 23 is simply plugged onto the existing AMD retention modules and screwed tight. Technical Data Compatibility AMD Socket: AM4 Ram Clearance: unlimited Warranty: 6 Years Heatsink Outer Diameter: 93.4 mm Fin Material: Aluminum Number of Fins: 50 Y-shaped Fins Thermal Paste: MX-2 pre-applied Fan Fan Diameter: 90 mm Fan Speed: 100 - 2000 rpm Fan Bearing: Dual Ball Bearing Noise Level: 0.3 Sone Current: 0.06 A Connector: 4-Pin Size & Weight Lenght: 98.6 mm Width: 121 mm Height: 65 mm Weight: 275.5
Leistungsstarke AIO-Kühlung in Weiß, in Zusammenarbeit mit Roman "der8auer" Hartung, mit 360-mm-Radiator, drei Wing Boost 3 ARGB High Speed 120-mm-Lüfter, schickes Design & leiser Betrieb, mit Thermal Grizzly Hydronaut Wärmeleitpaste, kompatibel zu vielen AMD & Intel Sockeln
Leistungsstarke AIO-Kühlung in Weiß, in Zusammenarbeit mit Roman "der8auer" Hartung, mit 240-mm-Radiator, zwei Wing Boost 3 ARGB High Speed 120-mm-Lüfter, schickes Design & leiser Betrieb, mit Thermal Grizzly Hydronaut Wärmeleitpaste, kompatibel zu vielen AMD & Intel Sockeln
Tootekood: R-AK400-BKNNMD-G-1GTIN: 6933412727798Jahutid ja lisad
Intel: LGA1700/1200/1151/1150/1155 AMD: AM5/AM4 Product Dimensions: 127×123×155 mm Heatsink Dimensions: 120×45×152 mm Net Weight: 802 g Heatpipe: diam. 6 mm×4 pcs Fan Dimensions: 120×120×25 mm Fan Speed: 500~1650 RPM±10% Fan Airflow: 59.46 CFM Fan Air Pressure: 1.62 mmAq Fan Noise: less than 28 dB(A) Fan Connector: 4-pin PWM Bearing Type: Fluid Dynamic Bearing Fan Rated Voltage: 12 VDC Fan Rated Current: 0.1 A Fan Power Consumption: 1.2 W
With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2000 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2000 rpm, it provides an air flow of 92.3 CFM, together with a high static pressure of 2.53mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 460 x 140 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 20 Fan size 140mm Fan slots 3 one-sided / 6 double-sided Color black Technical data fans L x W x H 140 x 140 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.26 (Max. 0.3) A Rated Power 3.12 (Max. 3.6) W Rated Speed 0 - 2000rpm/min (±10%) Max. Air Flow 92.3CFM Max.Static Pressure 2.53mm-H2O Noise level (rated voltage, mute room, distance 1m) 34.3 (Max. 36) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm
Tootekood: R-AG620-WHANMN-G-2GTIN: 6933412727835Jahutid ja lisad
Leistungsstarker Dual-Tower-Kühler, integrierte A-RGB-Beleuchtung, zwei 120-mm-PWM-Lüfter mit A-RGB-LEDs, TDP von 260 Watt, hohe Kompatibilität zu Intel- und AMD-Sockeln
The Eisbaer Aurora HPE Edition 360 CPU AIO water cooling features the extremely powerful NexXxos HPE Performance all-copper radiator equipped with the high-throughput Aurora Rise 120mm fans. All of the components used come from the classic DIY water cooling range and are also used for the most part in the enterprise products for servers. The Eisbaer LT Aurora can be expanded with additional components thanks to the quick-release fastener. Alphacool's Eisbaer Aurora HPE Edition 360 CPU AIO is a high performance all-in-one water cooling system that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop.New HPE Radiator!The NexXxos ST30 HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K. Radiator & PumpAs with all Alphacool products, the radiator base is made of nickel-plated copper and is equipped with very fine cooling fins that are distributed over the entire base. A nozzle plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. The Eisbaer LT Aurora cooler uses the very compact and small DC-LT 2 pump. It provides enough power to add another component such as a GPU water cooler or another radiator to the circuit.FanThe Alphacool Rise Aurora fan offers a wide control range as well as superior Digital aRGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design create unique effects. The fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. Additionally, it offers a Zero control, which allows the fan to be regulated down to 0 RPM and then starts at approximately 350 RPM. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m³/h) paired with high static pressure (3.17mm/H₂O).DIY connections and ES hosesThe hose connections are from the normal DIY segment and therefore use a G1/4" thread. Thus, it is very easy to replace them. The black TPV hose comes, like the connectors, from the Alphacool ES series which is primarily installed in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform at high temperatures. The quick connector is not made of heavy brass, but of extremely light, durable and robust nylon. The quick disconnect is compatible with many other models in the Alphacool product line.Full Digital aRGB IlluminationThe cooler pump assembly and fans are fully equipped with Digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set with the included controller or a Digital RGB controller on the motherboard. For a nice visual effect, of course, the illuminated polar bear on the cooler pump unit. For easier control via a controller, the fans and also the pump can be connected in series as a daisy chain. This enables a neat wiring of the individual LED components. Compatibility:AMD: AM4 / AM5 / SP6 / sTRX4 / sWRX8 / TR4Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 Technical data radiatorL x W x H391,5 x 124 x 30mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"Possible fan size120mmPossible fan assembly3x one-sided / 6x both-sidedPressure tested0,8 BarMaximum working temperature60°CFin density18 FPITechnical data cooler with pumpL x W x H66 x 66 x 69mmMaterial cooler bottomnickel plated copperMaterial cooler top & reservoirnylon, acrylicThreads2x G1/4“ (+ 1x Fillport G1/4“)Pump typeDC-LT2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WPressure tested0,8 BarMaximum working temperature60°CTechnical data fansL x W x H120 x 120 x 25mmSpeed0-2500 rpm (+/- 10%)BearingSleeve BearingConnection4-Pin PWMCable length40cmVoltage12V DCCurrent consumption0,65A (0,72 max)Static pressure3,17 mm/H₂OMax. air flow118,9 m³/hNoisemax. 31,5 dB(A)Number of digital aRGB LEDs20Technical data liquidColorclearIngredient 1destilled water (CAS-Nummer 7732-18-5)Ingredient 2Glysantin (CAS-Nummer 1017-21-1)Working temperatures15C°/+90°CTechnical data quick-release couplingDimensions95 x 27mmMaterialNylonTube size12,7/7,6mmColorblackTechnical data connectorsDimensions (connection straight)24 x 18mmQuantity (connection straight)2xDimensions (connection 90°)35 x 27 x 17mmQuantity (connection 90°)2xTube size12,7/7,6mmMaterialbrassTechnical data tubeLength40cmMaterialTPV (EPDM/PP)Tube size12,7/7,6mmHardness grade35 Shore-A to 50 Shore-DMaximum working temperature-50 to +155°CColorblackWarranty: 3 years???? Warranty Terms
ROG Strix LC II 280 ARGB AIO delivers high-performance CPU liquid cooling with sleek, modern aesthetics. Featuring a closed-loop design and addressable RGB radiator fans, the cooler unleashes the full potential of an Intel or AMD CPU while further accentuating your build with brilliant multi-color lighting effects. With the cooling you expect from ROG, Strix LC II 280 ARGB is ready to become an essential part of your rig and light it up with your own unique style.
All-In-One water cooling in black, 360mm radiator, pump cover with configurable IPS display, powerful Asetek PWM pump, three SL-INF 120mm ARGB PWM fans, elegant design and quiet operation, compatible with AMD and Intel sockets (including AM5 and LGA 1700)
The Enermax ELC-LMF-360-SF LiqMaxFlo SR is a high-performance AIO (All-In-One) CPU cooler designed to keep your system running cool and efficient. With a net weight of 2.42 kg, it offers robust cooling capabilities for demanding computing tasks.
The CORSAIR RS120 MAX case fan is designed for enthusiasts seeking to enhance their system's performance while maintaining quiet operation. It features CORSAIR AirGuide technology, magnetic dome bearing, and PWM support for precise airflow control. With an airflow range of 16.5 - 72 cfm and a noise level kept between 10 - 29.5 dBa, it ensures your system remains cool and quiet, even under heavy load. The inclusion of Zero RPM fan mode further reduces noise during low-load operations, making it an ideal choice for high-performance computing environments. Whether you're gaming, creating, or working, the RS120 MAX provides the cooling efficiency and quiet operation your system needs.
SWAFAN EX14 ARGB brings magnetic force design to ARGB fans while keeping the iconic swappable fan blade design. Daisy-chaining up to 3 fans per cable improves fan connection efficiency and convenience while enhancing cable management for PC building.
The CORSAIR iCUE Link LX140 RGB case fan is a high-performance cooling solution designed for enthusiasts seeking efficiency and aesthetics in their computer builds. It features an impressive airflow range of 10.74-84.7 cfm, ensuring that your components stay cool under load. The inclusion of CORSAIR AirGuide technology further enhances cooling by directing the airflow exactly where it's needed the most.For those who demand precision, the fan supports Pulse-width modulation (PWM), allowing for detailed control over fan speeds to strike the perfect balance between cooling and noise. Additionally, the Zero RPM fan mode can completely silence the fan at low temperatures, making it ideal for light computing tasks.Beyond performance, the LX140 RGB elevates the look of any build with its addressable RGB lighting, capable of displaying a wide range of colors and effects that can be synchronized with other iCUE compatible devices. Its magnetic dome bearing design not only contributes to its quiet operation but also ensures longevity. With the included mounting kit, installation is straightforward, making it an excellent choice for both new builds and upgrades alike.
The CORSAIR iCUE Link LX140 RGB case fan is a high-performance cooling solution designed for enthusiasts seeking efficiency and aesthetics in their computer builds. It features an impressive airflow range of 10.74-84.7 cfm, ensuring that your components stay cool under load. The inclusion of CORSAIR AirGuide technology further enhances cooling by directing the airflow exactly where it's needed the most.For those who demand precision, the fan supports Pulse-width modulation (PWM), allowing for detailed control over fan speeds to strike the perfect balance between cooling and noise. Additionally, the Zero RPM fan mode can completely silence the fan at low temperatures, making it ideal for light computing tasks.Beyond performance, the LX140 RGB elevates the look of any build with its addressable RGB lighting, capable of displaying a wide range of colors and effects that can be synchronized with other iCUE compatible devices. Its magnetic dome bearing design not only contributes to its quiet operation but also ensures longevity. With the included mounting kit, installation is straightforward, making it an excellent choice for both new builds and upgrades alike.
Three case fans, with digitally addressable RGB lighting, 120-millimeter format, PWM-controlled, 800-1,600 RPM, 100.24 m³/h airflow, includes rubber dampers and screws.
Striking ARGB backlighting Each Savio FAN-01 fan has up to 16 built-in ARGB LEDs for spectacular visual effects. You can program the color of the backlighting according to your individual preferences, requirements, or time of day. The changing colors guarantee an enhanced gaming experience, which any gamer is sure to appreciate. Effective cooling The set of ARGB SAVIO FAN-01 fans consists of four pieces with 6-pin connectors along with a controller that allows you to control them. They have a standard size of 120 mm and speeds of 1,200 RPM, which guarantee very effective cooling of your computer. Savio FAN-01 ARGB fans have an auto-backlight mode, and speed intensity adjustments. It contains also options to decrease and increase the intensity of the backlight, and 3 modes of control by voice. This allows you to customize their operation according to your individual needs. Intuitive and convenient control The fans are controlled using the included controller. With it, you can adjust the backlight in several different ways. The first and easiest is to use the traditional remote control. Then, you can also do it using the Reset/LED buttons, which are located on the case. Another option is to control it using dedicated motherboard software (MSI Mystic Light RGB or Gigabyte RGB Fusion, etc.). The last option is to control the sound - the backlight changes depending on its intensity in the room. Great freedom of operation The fan blades have been profiled optimally to always maintain their original shape during operation. This translates into a reduction of additional vibrations and unwanted noise. As a result, they reach their maximum speed at a low volume of up to 25 dB, ensuring very quiet operation. Technical specification of the fans: Fan size: 120 mm Voltage: 12 V Power connector: SATA Fan connector: 6-pin Backlight: ARGB Speed control: yes, with the remote control Max. rotation speed: 1200 RPM Max. noise level: 25 dBA Controller technical specification: 10 × 6-pin connector 2 × 3-pin connector 1 × 4-pin power connector 1 × Aurora 2-pin connector 1 × RS 2-pin connector Frequency bands in which the radio equipment operates: 433.920 MHz Maximum radio-frequency power transmitted in the frequency band in which the radio equipment operates: 5 dBm Set contents: 4 × ARGB fan Controller Remote control 16 × screws for mounting the fan
