OPTIMISED FOR STATIC PRESSURE During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P8 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Therefore Arctic extends the warranty to 10 years. 200 TO 3000 RPM REGULATED VIA PWM PST Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 3000 rpm Airflow: 23.4 CFM / 40.3 m³/h Static Pressure: 1 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 0 V Current: 0.09 A Cable Lenght: 400 mm Size & Weight Lenght: 80 mm Width: 80 mm Height: 25 mm Weight: 81 g
Tootekood: FD-FAN-PRI-AL18-PWMGTIN: 7340172702580Jahutid ja lisad
Product kirjeldus: Fractal Design Prisma AL-18 case fan Product Type: Case fan Package Content: 4 fan screws, 4 M4 x 43mm screws, 4 screws (6-32 x 43) värv: must frame, valge blades Fan Diameter: 180 mm Fan kõrgus: 38 mm Fan Bearing: Long life liugelaager pöördekiirus: 300-1200 pööret minutis õhuvool: 146.8 cfm müratase: 14.9 - 37.4 dBA Power ühenduspesa: 4-pin ARGB connector nominaalpinge: 12 V Features: Trip wire technology, PWM control mõõtmed (WxDxH): 18.2 cm x 18.2 cm x 4 cm kaal: 521 g Manufacturer Warranty: 3-year garantii
All-in-one liquid CPU cooler, 80.95 CFM, 2 slot ROG 120mm ARGB fan, Aura Sync RGB, LGA1700/1200 support Seventh Gen Asetek pump delivers exceptional cooling and minimal noise with an operating range starting at 840 rpm.ROG-designed addressable RGB radiator fan for optimized airflow and static pressure 81 CFMReinforced, sleeved tubing for increased durabilityIndividually addressable A-RGB and NCVM coating pump cover accentuates the sleek, modern aesthetics Styled to complement ROG motherboards, at the center stage of your buildIntel® LGA 1700, 1200, 1150, 1151, 1152, 1155, 1156, 2011, 2011-3, 2066 and AMD AM4/AM5/TR4 support
The CORSAIR iCUE H100i ELITE CAPELLIX XT Liquid CPU Cooler offers superior, high-performance cooling for your CPU, featuring CORSAIR AF RGB ELITE fans, a 240mm radiator, and brilliantly bright CAPELLIX LEDs. It is compatible with a wide range of sockets, including Intel: 1700, 1200, 1150, 1151, 1155, 1156, 2011, 2066, and AMD: AM4, sTRX4, sTR4, ensuring broad compatibility with various CPU models.
The Eisbaer Aurora HPE Edition 360 CPU AIO water cooling features the extremely powerful NexXxos HPE Performance all-copper radiator equipped with the high-throughput Aurora Rise 120mm fans. All of the components used come from the classic DIY water cooling range and are also used for the most part in the enterprise products for servers. The Eisbaer LT Aurora can be expanded with additional components thanks to the quick-release fastener. Alphacool's Eisbaer Aurora HPE Edition 360 CPU AIO is a high performance all-in-one water cooling system that is as easy to install as an AIO, but offers the performance of a pre-assembled and pre-filled custom loop.New HPE Radiator!The NexXxos ST30 HPE Radiator uses the same materials as previous NexXxos models, but takes it a step further technically. Due to the condensed internal structure, the number of water channels and copper fins could be increased. Thus, a larger volume of water is in direct contact with the cooling fins and the heat transfer is enormously improved. The higher number of fin rows and their shortening also makes much more efficient use of the cooling surface. Comparison tests with the conventional NexXxos radiator have shown that a performance increase of 4.5K is possible when using the HPE radiator. At higher ambient temperatures and higher fan speeds, the performance gap with the normal NexXxoS radiators even increases progressively, reaching a possible performance increase of up to 6K. Radiator & PumpAs with all Alphacool products, the radiator base is made of nickel-plated copper and is equipped with very fine cooling fins that are distributed over the entire base. A nozzle plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. The Eisbaer LT Aurora cooler uses the very compact and small DC-LT 2 pump. It provides enough power to add another component such as a GPU water cooler or another radiator to the circuit.FanThe Alphacool Rise Aurora fan offers a wide control range as well as superior Digital aRGB LED lighting. The individually controllable 5V aRGB LEDs paired with the fan's special design create unique effects. The fan can be controlled from 0 to 2500 rpm via the 4-pin PWM connector. Additionally, it offers a Zero control, which allows the fan to be regulated down to 0 RPM and then starts at approximately 350 RPM. At 800 rpm, the fan is nearly silent, but still offers good airflow (118.9 m³/h) paired with high static pressure (3.17mm/H₂O).DIY connections and ES hosesThe hose connections are from the normal DIY segment and therefore use a G1/4" thread. Thus, it is very easy to replace them. The black TPV hose comes, like the connectors, from the Alphacool ES series which is primarily installed in servers and workstations. The hose does not contain any plasticizers and, unlike classic PVC hoses, does not deform at high temperatures. The quick connector is not made of heavy brass, but of extremely light, durable and robust nylon. The quick disconnect is compatible with many other models in the Alphacool product line.Full Digital aRGB IlluminationThe cooler pump assembly and fans are fully equipped with Digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set with the included controller or a Digital RGB controller on the motherboard. For a nice visual effect, of course, the illuminated polar bear on the cooler pump unit. For easier control via a controller, the fans and also the pump can be connected in series as a daisy chain. This enables a neat wiring of the individual LED components. Compatibility:AMD: AM4 / AM5 / SP6 / sTRX4 / sWRX8 / TR4Intel: LGA 1150 / LGA 1151 / LGA 1155 / LGA 1156 / LGA 1200 / LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 2066 Technical data radiatorL x W x H391,5 x 124 x 30mm (+/- 3%)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads2x G1/4"Possible fan size120mmPossible fan assembly3x one-sided / 6x both-sidedPressure tested0,8 BarMaximum working temperature60°CFin density18 FPITechnical data cooler with pumpL x W x H66 x 66 x 69mmMaterial cooler bottomnickel plated copperMaterial cooler top & reservoirnylon, acrylicThreads2x G1/4“ (+ 1x Fillport G1/4“)Pump typeDC-LT2Pump speed2600 rpm (+/- 10%)Head of delivery1 mMaximum flow rate72 L/hVoltage6-13,5V DCPower consumption3,2WPressure tested0,8 BarMaximum working temperature60°CTechnical data fansL x W x H120 x 120 x 25mmSpeed0-2500 rpm (+/- 10%)BearingSleeve BearingConnection4-Pin PWMCable length40cmVoltage12V DCCurrent consumption0,65A (0,72 max)Static pressure3,17 mm/H₂OMax. air flow118,9 m³/hNoisemax. 31,5 dB(A)Number of digital aRGB LEDs20Technical data liquidColorclearIngredient 1destilled water (CAS-Nummer 7732-18-5)Ingredient 2Glysantin (CAS-Nummer 1017-21-1)Working temperatures15C°/+90°CTechnical data quick-release couplingDimensions95 x 27mmMaterialNylonTube size12,7/7,6mmColorblackTechnical data connectorsDimensions (connection straight)24 x 18mmQuantity (connection straight)2xDimensions (connection 90°)35 x 27 x 17mmQuantity (connection 90°)2xTube size12,7/7,6mmMaterialbrassTechnical data tubeLength40cmMaterialTPV (EPDM/PP)Tube size12,7/7,6mmHardness grade35 Shore-A to 50 Shore-DMaximum working temperature-50 to +155°CColorblackWarranty: 3 years???? Warranty Terms
All-in-One-Wasserkühlung, 360 mm Radiator, 3x 120-mm-PWM-Lüfter optimiert für Radiatorbetrieb, integrierte RGB-Beleuchtung und optimierte Schlauchanschlüsse
TUF Gaming TF120 ARGB chassis fan delivers high performance and durability in a rainbow of color. - Class-leading airflow, and low noise levels. - Advanced fluid dynamic bearing provides up to 250,000 hours of operation. - PWM control: ultra-wide RPM range allows optimal cooling for all types of workloads. - Anti-vibration pads reduce fan noise by damping rattling and vibration. - A double-layer LED array produces deeper color saturation and more lighting effects than conventional RGB fans. - Aura Sync compatibility lets you coordinate colors and lighting effects with a huge range of hardware.
Kraken Elite 280 (2023) 280mm AIO Liquid Cooler with LCD Display Get high-performance cooling, display a favorite animated GIF or static image, monitor real-time PC performance metrics, see music that's currently playing, stream browser content and more with NZXT CAM software. 2.36” diameter wide-angle LCD display with 640x640 resolution and 60 Hz refresh rate provides a sharp image from any viewing angle Screen supports the display of custom images, animated GIFs, and CAM system info with adjustable orientation Powerful Asetek pump provides optimal cooling and up to 2,800 RPM whisper-quiet operation Includes F140/F120 RGB Core fans Includes RGB Controller, RGB Fans, & USB Y-Cable Single breakout cable simplifies installation Rubber tubing is reinforced with nylon-braided sleeves to prevent leaks Control custom screen content, pump speed, and zero-noise fan curves with NZXT CAM
High-End CPU-Wasserkühler, transparentes Acrylgehäuse mit schwarzem Cover, Kühlerboden aus .925-Sterlingsilber, für gängige Intel Sockel, mit Thermal Grizzly Kryonaut Wärmeleitpaste
High-End CPU-Wasserkühler, transparentes Acrylgehäuse mit schwarzem Cover, Kühlerboden aus .925-Sterlingsilber, für Intel Sockel 2011/2011-3/2066, mit Thermal Grizzly Kryonaut Wärmeleitpaste
Striking ARGB backlighting Each Savio FAN-01 fan has up to 16 built-in ARGB LEDs for spectacular visual effects. You can program the color of the backlighting according to your individual preferences, requirements, or time of day. The changing colors guarantee an enhanced gaming experience, which any gamer is sure to appreciate. Effective cooling The set of ARGB SAVIO FAN-01 fans consists of four pieces with 6-pin connectors along with a controller that allows you to control them. They have a standard size of 120 mm and speeds of 1,200 RPM, which guarantee very effective cooling of your computer. Savio FAN-01 ARGB fans have an auto-backlight mode, and speed intensity adjustments. It contains also options to decrease and increase the intensity of the backlight, and 3 modes of control by voice. This allows you to customize their operation according to your individual needs. Intuitive and convenient control The fans are controlled using the included controller. With it, you can adjust the backlight in several different ways. The first and easiest is to use the traditional remote control. Then, you can also do it using the Reset/LED buttons, which are located on the case. Another option is to control it using dedicated motherboard software (MSI Mystic Light RGB or Gigabyte RGB Fusion, etc.). The last option is to control the sound - the backlight changes depending on its intensity in the room. Great freedom of operation The fan blades have been profiled optimally to always maintain their original shape during operation. This translates into a reduction of additional vibrations and unwanted noise. As a result, they reach their maximum speed at a low volume of up to 25 dB, ensuring very quiet operation. Technical specification of the fans: Fan size: 120 mm Voltage: 12 V Power connector: SATA Fan connector: 6-pin Backlight: ARGB Speed control: yes, with the remote control Max. rotation speed: 1200 RPM Max. noise level: 25 dBA Controller technical specification: 10 × 6-pin connector 2 × 3-pin connector 1 × 4-pin power connector 1 × Aurora 2-pin connector 1 × RS 2-pin connector Frequency bands in which the radio equipment operates: 433.920 MHz Maximum radio-frequency power transmitted in the frequency band in which the radio equipment operates: 5 dBm Set contents: 4 × ARGB fan Controller Remote control 16 × screws for mounting the fan
BLAST fan 120mm ARGB 3-pin 5V, 4-pin 12V Technical specifications: Fan size: 120mm LED voltage: 5 V LED connector: 3-pin (male + female) Fan voltage: 12 V Fan connector: 4-pin PWM (male + female) Backlighting: ARGB Control: via motherboard Max. speed: 800-1800 RPM Max. noise level: 25 dBA Kit contents: 1 × ARGB fan 4 × screws for fan mounting Size and shape The Savio BLAST fan has a standard size of 120 mm and a maximum speed of up to 1800 RPM. This guarantees very effective cooling of your computer. The unique design of the fan's rim provides amazing lighting effects inside the case. ARGB backlighting Each BLAST fan features 9 integrated ARGB LEDs that provide impressive lighting effects. You can customize the color of the illumination according to your personal preferences, needs, and even time of day. The wide variety of colors greatly enhances the gaming experience, translating into greater gaming satisfaction and building the mood in the player's room. Backlight control Controlling the backlighting of the BLAST fan from Savio is done via a 3-pin 5V ARGB connector. Once it is connected to a motherboard equipped with the appropriate slot, it is possible to address individual LEDs for advanced lighting effects. The fan has an integrated adapter that allows for serial connection of several fans in case the motherboard has insufficient connectors to plug them in. Speed control (PWM) BLAST features a 4-pin connector that allows infinite speed control via the motherboard's built-in PWM controller. Fan speed control can be implemented via UEFI/BIOS and dedicated software. These options provide access to basic settings, where you can determine the fan speed depending on the temperature inside the case or according to your preferences. High operating culture The fan from Savio provides high airflow, thanks to its 9-blade design. The anti-vibration pads used significantly minimize the generated noise and unwanted vibrations. With BLAST you can be sure that the noise level will not exceed 25 dBA. Hassle-free installation is facilitated by the 4 mounting screws included in the kit.
Tootekood: VENTO120ARGBPWM-BKCWWGTIN: 4711085946102Jahutid ja lisad
XPG VENTO 120 ARGB PWM cooling fan is designed for peak performance and style, featuring a 4-Pin PWM connector, ARGB lighting effects, and a Rifle Bearing for quiet operation and durability. Its daisy-chain capability, combined with high static pressure and an auto-restart feature, ensure optimal cooling efficiency. Compatible with all major ARGB management software, it offers limitless customization options. Elevate your cooling setup with the XPG VENTO 120 ARGB PWM fan.
The CORSAIR iCUE Link RX140 MAX Expansion case fan delivers airflow performance and advanced cooling capabilities for PC enthusiasts. With a fan diameter of 140 mm, this fan operates at a rotation speed ranging from 300 to 1600 rpm, providing airflow from 27.5 to 103.5 cfm. The magnetic bearing ensures durability, while the innovative CORSAIR AirGuide technology optimizes airflow with a focus on cooling efficiency. The fan also features Pulse-width modulation (PWM) support for dynamic speed adjustments and a Zero RPM fan mode, allowing for silent operation when cooling is not needed. The package includes everything necessary for installation, including mounting screws and iCUE Link connectors, making setup seamless and straightforward.
Darkflash CL12 LED Computer Fan (120x120)Provide your computer with optimal working conditions. The powerful Darkflash CL12 fan guarantees efficient cooling and is also characterized by LED illumination. Its design is based on low noise level and easy installation. Opt for a combination of functionality and convenience!Optimal coolingDarkflash CL12 offers an RPM of 1200 and an airflow of 52.46 CFM. It cools your PC components perfectly, providing the necessary protection and optimizing performance.LED BacklightingThe fan is equipped with LED lightning, so that it is the perfect complement of a transparent PC case. With CL12 you do not only rely on functionality, but also on visual values.Clever DesignThe CL12 is designed for simple and intuitive installation. It features high-quality bearings that securely mount the fan and prevent unnecessary vibrations. The design also benefits from stands that effectively reduce noise levels. With Darkflash you gain comfort and confidence that your computer is in good hands!ManufacturerDarkflashModelCL12ColorBlackSize120x120 mmConnector4-PinRotational speed1200±10% RPMMaximum sound level25.52 dBAAirflow52.46 CFMCurrent0.4 ASupply voltage12VLife time30 000 hBearing typeHydro bearingBacklightLEDAntivibration mountsYESNumber of fans included1Dimensions120 x 120 x 25 mmWeight0,15g
White low-profile CPU cooler, 120mm aRGB PWM fan up to 1,800 RPM, asymmetrical design for high RAM compatibility, six copper heatpipes, and max. 200W TDP, compatible with AMD and Intel CPUs.
