Very powerful 92 mm PWM fan Optimal cooling with 4,300 revolutions per minute Very high airflow of 98.97 m³/h and static pressure of 6.17 mmH2O 0 dB mode for silent operation Durable hydrodynamic plain bearing ARCTIC P9 Max: Small fan with high performance With the P9 Max, ARCTIC impresses: Despite its small size, the PWM fan is powerful and effectively cools your high-end components in your gaming PC. With its 92 mm size, it is ideal for small cases. Effective cooling for your hardware With an incredible 4,300 revolutions per minute, your components are kept at low temperatures. The high airflow of 98.97 m³/h and static pressure of 6.17 mmH2O also make this fan perfect for mounting on a radiator. The 0 dB mode allows you to throttle the fan down to a standstill, giving you silent operation during idle. In addition, you can generally control the speed to your liking—or the fan can adjust automatically to the current workload. Hydrodynamic plain bearing The P9 Max uses a hydrodynamic plain bearing, ensuring quiet operation even under full load, while also guaranteeing high durability.
The final touch for a perfect PC You spend a lot of time to make your PC perfect. You’ve upgraded it for top performance, ultimate quietness, and unbeatable reliability. So what’s next? Our premium upgrade Power Cables, that’s what’s next. High quality, premium function, and flat out good looks come together in our line of premium Power Cables, intended for use with your high capacity be quiet! cable management power supply. These sleeved beauties in black are available in 8 S-ATA models for maximum convenience and compatibility with all type of cases, and come with a 3 year warranty. Mix and match lengths and connector arrays to achieve the perfect combination of stylish good looks, improved cooling airflow, and peripheral device support.
Leistungsstarker CPU-Kühler von Aerocool, integrierte digital adressierbare RGB-Beleuchtung, ein 120-mm-PWM-Lüfter mit ARGB-LEDs, TDP von 145 Watt, hohe Kompatibilität zu Intel- und AMD-Sockeln
All-in-One water cooling from InWin, 360mm radiator and copper plate, cooling block with striking Nebula lighting, fans with integrated RGB lighting, high compatibility with Intel and AMD sockets.
Fan ZM-AF 120 black The ZM-AF 120 fan is not only a computer accessory, but above all a guarantee of proper cooling of the case. Thanks to its dimensions of 120 x 120 x 26 mm and active air cooling, it ensures optimal operation of computer components even during intensive use. The parameters of this fan are impressive - a maximum speed of 2000 rpm and a minimum speed of 600 rpm allow for precise adjustment of the fan's operation to current needs. Additionally, the noise level of 29.7 dB makes using the computer comfortable. The ZM-AF 120 fan is characterized by high quality of workmanship, which translates into its durability and reliability. Thanks to the 4-pin connector, installation is quick and easy, even for less experienced users.
With the Phanteks GLACIER ONE 360D30 X2 DRGB, you get a powerful AiO water cooling system with a stylish design. The large 360 mm radiator ensures your CPU is cooled even under full load and is barely audible. The D-RGB lighting completes the overall look of the AiO cooler and gives your gaming PC a striking flair. AiO water cooling with a 360 mm radiator – ideal for high-performance CPUs Three quiet and powerful 120mm D30 fans Optimal cooling thanks to a high-performance pump with up to 3,100 RPM CPU block with a brushed aluminum top and integrated VRM fan Interconnect system for easy fan connectivity Phanteks GLACIER ONE 360D30 X2 DRGB AiO Water Cooling: Optimum Cooling for Your High-End CPU The Phanteks GLACIER ONE 360D30 X2 DRGB is a highly effective AiO water cooling system with striking D-RGB lighting and an attractive design. You control the lighting with a single cable, reducing cable clutter and enhancing your gaming PC's appearance. Do you already have the Phanteks Evolv X2 PC case? Then this AiO is the perfect addition to your gaming PC, as the designs match seamlessly! Its large copper base plate and fin layout maximize heat transfer, making this all-in-one water cooler perfect for high-end CPUs. Thanks to its compact, low-profile design, you can easily install high-performance RAM with large heat spreaders. The airflow is also improved. This AiO water cooler is compatible with all common AMD and Intel sockets – including AM5 and LGA 1851. Cooling block with top cover and integrated fan The built-in pump impresses with its high cooling performance of up to 3,100 RPM and a low noise level of just 20 dB(A). It is also equipped with a brushed aluminum cover and an integrated fan that provides additional cooling for the voltage regulators and M.2 SSD around the CPU socket. Strong cooling performance with the D30 fans Three high-performance 120mm D30 fans from Phanteks deliver massive airflow and precise radiator cooling. With airflow up to 109.25 m³/h and static pressure of 3.01 mmH₂O, they're perfect for use in AiO water coolers – even with dense fin structures or overclocked high-end processors. Despite this performance, they are barely audible at just 30.2 dB(A) at full speed – at low CPU loads, you won't hear them at all thanks to PWM control if you set the fan curve accordingly. The clever interconnect design allows you to effortlessly connect the fans together – with significantly fewer cables. The result: tidier cable management and an overall cleaner look inside your PC.
Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - PNY GeForce RTX™ 5090 ARGB EPIC-X RGB™ Overclocked Triple Fan GPU - PNY GeForce RTX™ 5090 ARGB EPIC-X RGB™ Triple Fan GPU - PNY GeForce RTX™ 5090 Overclocked Triple Fan GPU - PNY GeForce RTX™ 5090 Triple Fan GPU Technical data cooler - Complete dimensions (L x W x H): 218.40 x 148.57 x 34.38mm - Radiator base material: chrome-plated copper - Material radiator top: Acrylic - Material Terminal: Acetal - Material connection thread: Brass - Maximum working temperature: 60°C - Pressure tested: 0.8 bar - Connections: 4 x G1/4" - Thickness of radiator base: 3.25mm - Thick cooling fins: 0.4mm - Distance between cooling fins: 0.4mm - Lighting: digital aRGB LEDs - Power connection digital aRGB LEDs: 3-pin JST - Voltage digital aRGB LEDs: 5V - Number of digital aRGB LEDs: 9 - Color: transparent Technical data backplate - Dimensions (L x W x H): 218.40 x 120.00 x 6.00mm - Thick backplate without spacers: 3mm - Material: aluminum Warranty: 3 years
High-end in classic design Developed with and for the most demanding customers, the new (((NB))) Premium fan series, equipped with classic frame and rotor, combines the NB-BlackSilentPro series technology with a classic design. The high-grade NB-EKA Plus II drive system and the virtually inaudible NB-NanoSLI bearings ensure exceptionally quiet operation over the whole lifespan. Both are features which before were only available in the highly sophisticated Multiframe reference series. Besides the tasteful design in matte and high-gloss black, the BlackSilentPro fans feature individually expandable cable management and a NB-Silentframe silicone gasket as well as mounting material for vibration- and tool-free installation. Quality designed in Germany! Detailed information: High-quality fibreglass reinforced chassis in classic deign with Antidust Polycarbonate rotor Cable management, plug-in cables, 20+50cm combinable Vibration- and tool-free mounting Extremely low starting voltage Pulse-noise reduced NB-EKAPLus II Wide range drive Highest safety level: Reverse polarity and overload protection, restarting functionality, extremely fail-safe Virtually inaudible bearings Highest quality: Including mounting material and additional NB-Silentframe gasket Technical specifications: Dimensions: 92x92x25mm Colours: Black frame, transparent brown fan blades Nominal voltage: 12V Starting voltage: 5V Control range: 5-13.2V Power consumption: 0.81W Nominal speed: 1300rpm (+/- 10%) Airflow: 42m³/h / 24,7CFM Noise emissions: 14 dB(A) MTBF (25°C): 180000hrs Connector: 3-Pin Extent of delivery: 1x Fan
The new generation of compact fan technology is on the market. Multiframe® fans have completely unique multi-piece chassis, which eliminates vibration already inside of the fan. Therefore resonance throughout the system is reduced. Additional measures for noise reduction such as the use of decoupling kits or insulation mats can be spared with these fans. Depending on the case used, Multiframe® fans are able to reduce the fan-induced noise below the noise from the airflow itself. Multiframe® fans are than "more silent than the air". The new Multiframe® technology has a array of new features: The integrated vibration absorbers are just one of the new features that all contribute to noise reduction. For example the vibration absorbers are wider than the chassis to avoid any contact between case and vibrating parts. The use of massive and heavy materials in the fan leads to a lowering of the noise's frequencies, therefore making it less audible and more comfortable to the human ear. Aerodynamic optimization of frame and strutting also reduce noise by air swirling. This reduces a majority of the noise through airflow and therefore a large part of the overall noise level of the fan. The other parts of the Multiframe® fan series are also on the highest technological level. The improved EKAplus motor is voltage-independent extremely quiet and has an especially low starting voltage. The bearing used is the new NB-NanoSLI® bearing, which is especially quiet and has a long lifespan thanks to a special lubrication system. The fan is also equipped with a reliable auto-restart mechanism and is protected against polarity reversal. Interesting is the fact that the noise level of the Multiframe® series is almost completely dependent from the case they are installed in, as noise produced directly by the is reduced to a minimum and usually below the noise level of the airflow. Thereby these fans are more quiet than their airflow. With this new generation and advance in noise reduction more and more responsibility for noise reduction is in the hands f the case manufacturers. If full advantage is to be taken of these fans an aerodynamically optimized case has to be used, which does not obstruct airflow with tight meshes or other obstructions. Technical details: Dimensions: 80x80x25mm Speed (+- 10%): 1700rpm Airflow: 47m³/h Noise level: 14 dB(A) Voltage range: 4,5-13,8V Starting voltage: 4,5V Power consumption: 1,2W Warranty: 6 years
Es handelt sich bei dem Produkt um die neue Revision. Diese Pumpe ist weltweit die erste Pumpe, die in serienmäßig produzierten wassergekühlten Workstations eingesetzt wird, und ist ideal für die Wasserkühlung von Prozessoren und elektronischen Bauteilen geeignet. Aufgrund ihrer Baugröße und Leistung kann die darüber hinaus in einer Vielzahl von Anwendungen eingesetzt werden. Diese DC-Pumpe ist eine elektronisch kommutierte Kugelmotorpumpe, mit Laufzeiten von deutlich über 50.000 Stunden bei 12 Volt. Das einzig bewegliche Teil an einer Kugelmotorpumpe ist eine sphärisch geformte Rotor-/Laufradeinheit, die sich auf einer ultraharten, verschleißfesten Keramik-Lagerkugel abstützt. Eine konventionelle Welle mit Wellenlagern und Wellendichtungen ist nicht vorhanden. Die sphärische Lagerung der Rotor-/Laufradeinheit auf der Keramik-Lagerkugel bietet eine Vielzahl von Vorteilen: Ein Entstehen von Lagerspiel - und damit eine Geräuschzunahme - ist prinzipbedingt nicht möglich. Die Pumpe bleibt damit über die gesamte Laufzeit geräuscharm. Das Lager ist selbstnachstellend. Es wird vom Fördermedium direkt geschmiert (Nassläuferpumpe). Eine Wartung entfällt damit. Da der Rotor magnetisch immer in der vorgesehenen Lage gehalten wird, stellen kleinere Schmutzteilchen kein Problem dar. Ein Blockieren der Pumpe ist im Normalfall nicht möglich. Auch nach längerem Stillstand ist ein sicherer Anlauf gegeben. Angetrieben wird die permanentmagnetische Rotor-/ Laufradeinheit von einem Magnetfeld, das vom umliegenden Stator erzeugt wird. Dieser ist komplett um den Rotor herumgebaut. Die komplette Pumpe ist damit mit 38 mm nur wenig höher als der Stator selbst. Sie passt damit problemlos in alle handelsüblichen PC-, Barebone- und Mini-PC Gehäuse. Eine separate magnetische Abschirmung ist im Normalfall nicht notwendig. Das Kugelmotorprinzip ermöglicht einen sparsamen Betrieb mit vergleichsweise hohen Leistungen. Durch Spannungsvariation kann die DDC Gleichstrompumpe einfach und über einen großen Leistungsbereich geregelt werden. Alle medienberührenden Teile sind komplett korrosionsbeständig. Technische Daten Abmaße: (BxTxH) 62x62x38mm (Ohne Anschlüsse) Motorbauart: Elektronisch kommutierter Kugelmotor Nennspannung: 12 V DC Gleichspannung Zul. Spannungsbereich 6 bis 13,2 Volt Förderhöhe bei 12V: 3,7m max. Förderleistung: 420L/h Fördermedien: Wasser, Wasser-/Glykol-Gemische* Max. Systemtemperatur: 60° C Medienberührende Teile: Edelstahl 1.4571, PPS-GF40, EPDM O-Ringe, Aluminiumoxid, Hartkohle Anschlüsse: 2x 10/8mm Schlauchanschluss (keine Tülle notwendig) Lieferumfang: Laing DDC-Pumpe 12V DDC-1T Pumpentacho: Mit 3-Pin Molex Stecker als Pumpentachoausgang (für Mainboards oder Steuergeräte) Hinweis: Die Pumpe ist die neusten Revision. *WICHTIG: Wir empfehlen die Verwendung von schmierfähigem Wasserzusatz (wie z.B. AT Protect Plus oder Innovatek Protect). Anti-Corro-Fluid ist nicht zu empfehlen. ACHTUNG: Aufgrund der Leistung der Pumpe darf die nur in einem Kreislauf mit min. 1 Kühler betrieben werden. Beim Betrieb ohne Last kann die Pumpe durchbrennen. Important: The Laing pump's electronics are not waterproof. Please make sure that the electronic components do not come in contact with water during installation or when working on the pump. When replacing the top always ensure a proper fit of the O-ring seal and avoid spills when filling the Laing reservoir. Damages due to water in the electronic components are not replaced by Laing! Why are there Swiftech and Laing Versions? Are they different? The latter question can be answered quickly: No! Here an explanation: Lain produces all pumps in Hungary. They are just labelled differently for Overseas markets and the European market. The pumps themselves are threfore exactly identical. The overseas version has Swiftech as a distributor and the European version is neutrally black. The cheaper Swiftech pumps are usually shipped with decouplers, the Laing pumps usually not. The power, pressure head, flow rates. etc. are exactly the same. This product has been tested for you: Aquainfos Overclockingstation Userreview im Liquidluxx inkl. Video. Hardwaremax Bedienungsanleitung (DE, EN) Achtung: Pumpensteuerung durch Heatmaster möglich! Heinweis: Für die Pumpensteuerung durch den Heatmaster wird das Alphacool Pumpenadapterkabel (Artikel 52171) benötigt
Big, Bigger, SuperNova! 400 x 400 x 45 mm of pure cooling surface for nine 140mm or four 200 mm fans. No other Alphacool radiator offers as much surface area in a single product. Make No Compromises, Use Copper.As usual, Alphacool also uses pure copper for the NexXxoS 1260 SuperNova Radiator. The end chambers, water channels and cooling fins are all made of copper and are a unique selling point worldwide. As a result, Alphacool radiators have been among the most popular and best on the market for many years, providing the perfect foundation for every water cooling system. Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result, especially for such large radiators, is a fin spacing of 12 FPI. This means that the air flow is almost unobstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. Which fans?The 1260 SuperNova Radiator offers for four 200 mm fans with a hole spacing of 154 mm on one side. On the opposite side, up to nine classic 140 mm fans can be mounted on another mounting plate. If you want to operate the radiator passively, you can remove both mounting plates. This will ensure you do not to obstruct the natural airflow. Of course, the mounting plates for both types of fans can also be interchanged. This gives you more freedom when mounting the fans. Connection optionsThe Alphacool NexXxoS SuperNova Radiator offers two G1/4" threads for IN and OUT. A further G1/4" thread on the back of the radiator serves as a fill port. Alternatively, a temperature sensor or a drain port can also be attached here.The king on the rads! No other radiator in Alphacool's portfolio can match the performance of the SuperNova radiator. With four 200mm or a whopping nine 140 mm fans and a pure cooling surface of 40 x 40 cm, it really does live up to the SuperNova name. Technical data radiatorL x W x H441 x 422 x 48 mmMaterial cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads3x G1/4"Possible fan size140 mm front / 200 mm backPossible fan assembly9 front / 4 backThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density12 FPIWeight4225 gColorblackWarranty: 10 years???? Warranty Terms
The CORSAIR RS120 case fan delivers powerful cooling performance with its 120 mm diameter and 25 mm height. Featuring a rotation speed that ranges from 420 to 2100 rpm, this fan caters to diverse airflow needs, providing an airflow of 13.3 to 72.8 cfm for efficient cooling. With Pulse-width modulation (PWM) support, it dynamically adjusts speed based on system temperature, ensuring optimal performance while minimizing noise. The fan operates with a noise level between 10 to 36 dBA, making it suitable for silent or high-performance builds. In addition, the RS120 incorporates a zero RPM fan mode for silent operation when cooling is not needed. Its daisy-chain design simplifies cable management in PC builds by enabling multiple fans to be connected seamlessly. With a magnetic dome bearing, it provides longevity and efficient performance, while air pressure of 0.2 to 4.15 mm ensures focused airflow to critical components. The package includes 4 mounting screws for easy installation.
120-mm PWM fan with aluminum framePractical wireless connection for fewer visible cables40 digitally addressable RGB LEDsSpeed and lighting adjustable via Lian Li L-Connect 3 softwareWhisper-quiet cooling with max. 2,300 RPM at 34 dB(A)141.69 m³/h max airflow and 2.66 mmH2O static pressureRubber pads to decouple disturbing vibrationsNote: This fan requires the Lian Li L-Wireless controller. The controller is sold separately.Wireless ARGB Fans for Clean Cable ManagementThe UNI FAN TL Wireless from Lian Li offers an efficient solution for cable management in your PC. With its wireless 2.4 GHz control for lighting effects and fan speed, it requires significantly fewer cables, simplifying the build of this system. The fan offers dual-zone lighting effects and is easy to install.UNI FAN TL Wireless: Simple Installation and Full ControlThe UNI FAN TL Wireless is easy to install and control thanks to the L-Wireless controller. Through the wireless connection, you control both the RGB lighting and the fan speed directly from your motherboard without the need for extra cables.Customizable Display and Quiet PerformanceThanks to the Fluid Dynamic Bearing (FDB) technology, the Lian Li UNI FAN TL Wireless runs quietly and efficiently, even at high speeds of up to 2,300 RPM. This provides powerful cooling and an aesthetically pleasing solution for your PC, making traditional fans fade in the light of UNI FAN TL Wireless.Reverse Blade for Clean Look and More PerformanceAre you looking for a solution to optimize airflow in your PC while also improving the aesthetics of your fans? With a Reverse Blade fan, you choose a fan blade shape that directs airflow in the opposite direction.Your advantage: The look is the same with every fan. Gone are the days of having to mount fans with the back side against the case to pull in fresh air. This keeps your system cool and incredibly quiet, even under heavy applications!
The UNI FAN CL Wireless from Lian Li offers you wireless technology in a stylish fan. Thanks to the tool-free push-to-connect system, 2.4 GHz synchronization, and dual-zone RGB, you can upgrade your system in no time – completely cable-free. Perfect for clean setups and powerful cooling. 3-pack of 120 mm PWM fans with white frames & aluminum nameplate Dual-zone RGB: independent control for fan blades & side strips Push-to-Connect: tool-free connection of multiple fans FDB bearing: quiet, long-lasting operation with up to 2,150 RPM 131.41 m³/h airflow & 2.52 mmH₂O static pressure L-Connect 3 software: easy control over speed & RGB Lian Li UNI FAN CL Wireless fans: dual-zone RGB for impressive lighting effects The independently controllable LED zones let you fine-tune your lighting even more. Whether on the fan blades or the side strips, your system gets the look you want. Tool-free installation, wireless control Thanks to the push-to-connect mechanism, you can link the fans together without screws. Paired with the optional L-Wireless Controller, you can control lighting and speed wirelessly via the L-Connect 3 software. PWM fans for quiet cooling with strong airflow With an airflow of 131.41 m³/h, 2.52 mmH₂O pressure, and just 29.8 dB(A) noise level, the CL Wireless fan is both quiet and powerful – ideal for demanding builds in your setup.
EX2-755 is an ambient liquid cooling system with several control options. This model contains a dual x 120mm fan aluminum radiator, providing roughly 590W of cooling with a 25°C ambient delta. Just add tubing, fittings, coolant, and connect to your cold plate(s).- Cooling capacity: 590W (2013BTU/hr) with 25°C liquid-ambient delta @ 4LPM- Radiator fan speed: automatic based on temperature, or 10 manual levels- Pump: 10 manual speed levels, up to 4LPM (1GPM)- Adjust audio alarm based on 3 included temperature sensors- Relay trigger can be configured as NO or NC and adjusted based on temperature- Power input: 12VDC (via computer Molex plug), or 110/220VAC with separate adapter- Reservoir capacity: 157ml (5.3 fl oz)- G 1/4 BSPP threads on back for fittingsVentilaatorJahRadiaatorJahJahutusvedeliku maht0,157 lVentilaatorite arv2 ventilaator(id)Kogus1Pumba pinge12Radiaatori materjalAlumiiniumToote värvMustKaal3,63 kgVentilaatori läbimõõt12 cm
ORCUS 140 Orcus is the evolutionary all-in-one CPU water cooling system from Raijintek. The AIO was developed and designed in Germany and through many years of experience in the field of water cooling, this product, in cooperation with global engineers, has become one of the most powerful AiO water cooling systems on the market. By externally mounting the pump, no vibrations are transmitted to the mainboard or case, contributing to the quiet operation of your silent gaming computer. What's new in this context is that instead of the pump normally installed in the CPU cooler, a flow indicator has now been installed and the level of the AiO can be checked. What of course should not be missing for today's gaming computers is the addressable RGB lighting. The integrated aRGB LEDs are located in the CPU cooler and the fans also shine in your case. With the included addressable RGB controller you can easily syncronize the aRGB lighting with your existing aRGB lighting or if there is no aRGB lighting yet you can adjust it with the remote control according to your needs. Technical details Compatible sockets: Intel® All Socket LGA 775/115x/1366/201x/2066 AMD® All AM4/AM3+/AM3/AM2+/AM2/FM2+/FM2 radiator Dimensions [l×b×h] 272×120×27 mm Material: aluminium Pump: Dimensions [l×b×h]: 69.5×40×33 mm Bearing type:Ceramic Axis Q-max / throughput: 66 L/H Pressure Head: 1.3 meters Noise level: 25 dBA [Max.] Service life: 50,000 hours Speed: 5000±10% R.P.M. @ 12VDC Rated Current: 180mA Input voltage: 12 V Power consumption: 2.2 W Fan: Dimension [l×b×h]: 140×140×25 mm Input voltage: 12V Starting voltage: 5V Speed: 400~1500 R.P.M. Bearing type: Hydromount Air Flow: 65.19 CFM [Max.] Air Pressure: 1.22 mmH2O [Max.] Lifetime: 40,000 hours Noise level: 30 dBA [Max.] Connection: 5V ADD header, PWM 4 pin header Rated Current: 0.14±10% A Power consumption: 1.68±10% W LED Rated Current: 0.69A [Max.] LED Power consumption: 8.28W [Max.] Accessories: 1x 8 port Controller Box 1x remote control 1x connecting cable Hint: 1. keep in a safe place for children. 2.check the list of components and the condition of the product before installation. If there is a problem, contact your dealer for a replacement or refund. 3.RAIJINTEK Co., Ltd. shall not be liable for damage caused by external influences, including improper use, power supply problems, accident, neglect, modification, repair, improper installation and inspection. Improper installation may damage the CPU and motherboard. 5. damage to the tank seal will void the warranty. 6.this product is an all-in-one water cooling solution, if you disassemble it or use other parts not approved by RAIJINTEK, the warranty will be void.
Tootekood: FD-FAN-DYN-X2-GP12-PWM-BKGTIN: 7340172701880Jahutid ja lisad
Gross depth (mm): 125.00 mm Gross height (mm): 185.00 mm Gross weight: 0.27 kg Gross width (mm): 25.00 mm Net weight: 0.12 kg Packing quantity: 1.00 pc(s) Plastic (No PET): 7.00 g Tare weight (kg): 0.15 kg Volume (m3): 0.00 m³ WEEE tax: No Other features: •High-grade LLS bearing with 100,000-hour MTBF delivers long-lasting dependability •PWM support offers a wide 500 to 2,000 RPM speed adjustment range for silent operation under lighter loads and maximum airflow during more demanding activity. •Counter-balanced magnet reduces axial tension on the bearing, resulting in less wear over time •Optimized fan geometry balances airflow with extra emphasis on static pressure for great performance in any usage scenario •Aerodynamic stator with embedded wiring helps reduce noise and unwanted turbulence •Stator struts sit on a wide angle to the trailing edge of the blades, resulting in a lower noise level and smoother noise profile •Strategically placed notches near the fan hub on the trailing edge of the blades help to eliminate the humming noise produced when the blades pass stator struts •“Trip wire” technology introduces a micro-turbulent layer that helps to combat elements that negatively affect performance, providing an overall more efficient and quiet fan environment •Customized design contributes to a cool running and beautiful looking build •Available in 120mm and 140mm sizes and multiple colors including black, white or the signature Fractal Design white-on-black combination Type: Case fan Producer product name: Dynamic X2 GP-12 PWM Black Fan dimensions (W x D x H): 120 x 120 x 25 mm Colour of product: White blades, black frame Fan connector: 4-pin fan header Bearing technology: LLS Rotational speed: 2000 RPM Noise level: 32.2 dB Maximum airflow: 87.6 cfm Air pressure: 2.3 mm H2O
