The CORSAIR iCUE H100i ELITE CAPELLIX XT Liquid CPU Cooler offers superior, high-performance cooling for your CPU, featuring CORSAIR AF RGB ELITE fans, a 240mm radiator, and brilliantly bright CAPELLIX LEDs. It is compatible with a wide range of sockets, including Intel: 1700, 1200, 1150, 1151, 1155, 1156, 2011, 2066, and AMD: AM4, sTRX4, sTR4, ensuring broad compatibility with various CPU models.
Die Kryonaut-Wärmeleitpaste wurde speziell für die extrem anspruchsvollen Anwendungen und die höchsten Ansprüche der Overlocking-Community entwickelt. Kryonaut empfiehlt sich auch als Top-Produkt für kritische Kühlsysteme im Industriebereich. Speziell für Overclocking Exzellente Wärmeleitfähigkeit Keine Aushärtung Hohe Langzeitstabilität Nicht elektrisch leitend
Each radiator fan is equipped with the NITRO+ Hybrid Fan Blade Design which combines the strengths of both the traditional axial fan and blower fan by improving the downward air pressure of the axial fan design while keeping the fan noise low with an up to 4ºC decrease and 5dBA improvement.
With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 279 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 2 one-sided / 4 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm
All-in-one water cooling from InWin, 240mm radiator and copper plate, cooling block with striking nebula lighting, fans with integrated RGB lighting, high compatibility with Intel and AMD sockets
MASTERLIQUID 240L CORE New Gen S Dual Chamber Pump Expanded Radiator Surface 120mm Fans Clean Classic Design CryoFuze Performance Thermal Paste Cooler Master has built upon the classic MasterLiquid L Series to present a redesigned and improved release of the MasterLiquid 240L Core. Featuring new design elements that bring a classic minimalist look to the series, the MasterLiquid 240L Core represents Cooler Masters ongoing innovative spirit. GEN S DUAL CHAMBER PUMPRedesigned copper base targets heat spots with precision along with boosted water flow and pressure for enhanced cooling performance. EXPANDED RADIATOR SURFACEExpanded radiator fin surface accelerates heat dissipation for superior cooling. 120MM FANSUpgraded 120mm fan delivers optimal radiator performance. CRYOFUZE THERMAL PASTEIncludes premium CryoFuze thermal paste for exceptional heat conductivity.
All-in-One water cooling from InWin, 240mm radiator with integrated pump, fan, and cooling block with integrated RGB lighting, high compatibility with Intel and AMD sockets.
Tootekood: ASSASSINSPIRIT120EVOGTIN: 814256016377Jahutid ja lisad
Thermalright Assassin Spirit 120 Evo CPU Cooler - 120 mm, A-RGB Upgrade your PC's cooling system with the Thermalright Assassin Spirit 120 Evo CPU Cooler. This high-performance air cooler features a 120 mm fan with vibrant A-RGB lighting, ensuring both efficient cooling and a visually stunning setup. Weighing in at 0.8910 kg, it is designed to provide optimal thermal performance while maintaining a sleek, modern aesthetic. Perfect for gamers and PC enthusiasts looking to enhance their system's cooling capabilities.
Fan speed (max): 500 Fan speed (min): 1400 Air flow rates: 60.68 Number of fans: 3 Noise: 26.5 Dimensions: 140 x 140 x 25 mm Other features: Hydraulic bearings Hardware controller RGB backlight 16.8 million colors
OPTIMISED FOR STATIC PRESSURE During the development of the new P8 PWM PST CO, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST CO is particularly suitable for use on heatsinks and radiators. FOR CONTINUOUS OPERATION The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Therefore Arctic extends the warranty to 10 years. 200 TO 3000 RPM REGULATED VIA PWM With a wide range of regulation and the PWM Sharing Technology (PST), the P8 PWM PST CO fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed. Technical Data Performance Fan Speed: 200 - 3000 rpm Airflow: 23.4 CFM / 40.3 m³/h Static Pressure: 1 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Dual Ball Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 0 V Current: 0.09 A Cable Lenght: 400 mm Size & Weight Lenght: 80 mm Width: 80 mm Height: 25 mm Weight: 78.5 g
Thermaltake's Pure Duo 12 ARGB Sync is a PWM controlled fan with addressable LEDs and 16.8 million colours. Radiators in particular benefit from its very quiet operation and low heat generation thanks to its self-lubricating hydraulic bearing. The 9-blade design allows a very high airflow and efficient cooling. The anti-vibration pads also ensure low noise levels. As the sealing cap prevents the lubricant from escaping, a long service life is also guaranteed. The two rings, each with nine addressable LEDs, are independent of each other and impress with an even light coverage and high colour intensity. The extensive effects give your housing the finishing touch and give it a unique look. Using the included controller, which does not require a 5V ARGB port, seven breathtaking effects can be selected. Alternatively, the fans can be connected to a 5V ARGB port on the mainboard and synchronised via compatible software such as AsRock Polychrome, ASUS Aura Sync, GIGABYTE RGB Fusion and MSI Mystic Light Sync. Technical Data: Dimenson: 120 x 120 x 25 mm Interface: Fan 2510-4P, LED 5V RGB Header Fan Stated Voltage: 9.0 V Fan Rated Voltage: 12 V and 5 V Rated current: 0.27 A, LED 0.28 A Power Input: 12V – 4.08 W, 5V – 2.8 W Fan Speed: 500 - 1500 rpm Max. Air Pressure: 1.72 mm-H2O Max Air Flow: 56.51 CFM Noise: 28 dB-A Bearing Type: Hydraulic Bearing Life Expectation: 40,000 hrs, 25℃ Weight: 168 g
PERFECTING ENGINEERINGCooler Masters Mobius 120 is our new series of performance fans. With our enhanced Ring Blade Design, the Mobius Series optimizes both performance and acoustics, catering to a dynamic range of applications from case, liquid or air, to overclocking and intense gaming.LOOP DYNAMIC BEARINGNew loop dynamic bearing design utilizes thick oil coating and lubrication to allow for stable performanceOIL REFLOWThe oil flows back to the sealed bearing to create constant lubrication against friction and increases the life span of the fan.DUST PROOFINGThe sealed and concave position of the bearing prevents air and dust exposure and ensures a smooth transfer of motion.ANTI-SWAY SYSTEMMagnetic ring prevents bearing shaft from tilting, stabilizing the fan to prevent fan blade obstruction under various orientations, as well as oil spray.PRESSURE AIR ACCELERATIONAngled inner frame rim with chamfered side vents boost airflow draw, maximizing force induced air pressure and diminishing dead air.ABSOLUTE ACOUSTICSSound output fine tuned to the optimal prominence ratio to achieve sub 6dB noise levels without performance sacrifice. Acoustic Testing Anechoic Chamber for ISO 3745 FFT analyzer: AD-3524 O Microphone: B&K 2235 Sound Pressure: IS0-7779 Sound Power: ISO-7779 Sound Quality: 1S0-532B /ISO Background noise: below 6dBAVARIOUS SPEEDS, VARIOUS FUNCTIONSThe Mobius Series offer various speeds for distinct usages. With the Mobius 120 operating up to 2050rpm, it is perfect for your case and chassis air intake. The Mobius 120P ARGB spins up to 2400rpm, designed to handle performance for air and liquid cooling.
AiO CPU-Kühler, Radiator aus Aluminium, Gummischläuche mit geflochtener Ummantelung, Pumpe mit max. 2.600 U/min, Vorinstallierte Kolink Umbra Void SP PWM Lüfter, Kompatibel mit vielen AMD- und Intel-Sockeln
AiO CPU cooler, aluminum radiator, rubber hoses with braided sleeve, pump with max. 2,600 rpm, pre-installed Kolink Umbra Void SP PWM fans, compatible with many AMD and Intel sockets
OPTIMISED FOR STATIC PRESSURE During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P8 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Therefore Arctic extends the warranty to 10 years. 200 TO 3000 RPM REGULATED VIA PWM PST Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 3000 rpm Airflow: 23.4 CFM / 40.3 m³/h Static Pressure: 1 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 0 V Current: 0.09 A Cable Lenght: 400 mm Size & Weight Lenght: 80 mm Width: 80 mm Height: 25 mm Weight: 81 g
DeepCool SC700 A-RGB Fan Hub on 12-porti omav seade, mis on mõeldud 5V 3-pin A-RGB ventilaatorite ja valgustuse haldamiseks arvutisüsteemides. See hub võimaldab kasutajatel ühendada ja juhtida mitmeid A-RGB seadmeid ühest kohast, tagades seeläbi mugava ja ühtlase valgustuse juhtimise. DeepCool SC700 on ideaalne valik entusiastidele ja ehitajatele, kes soovivad oma arvutisüsteemis luua muljetavaldavaid visuaalseid efekte ja hallata mitmeid ventilaatoreid või A-RGB komponente tõhusalt ja hõlpsalt.
All-In-One water cooling in black, 360mm radiator, pump cover with configurable IPS display, powerful Asetek PWM pump, three SL-INF 120mm ARGB PWM fans, elegant design and quiet operation, compatible with AMD and Intel sockets (including AM5 and LGA 1700)
