Tootekood: TG-MP8-100-100-20-1RGTIN: 753677507388Jahutid ja lisad
The high performance thermal pads of the Thermal Grizzly Minus Pad series consist of a very elastic and flexible surface area with very high thermal conductivity, compensating for even the smallest of gaps between components. Available in a variety of different sizes and thicknesses. High thermal conductivity High compressibility Electrical insulation The easy to process and flexible minus pads are made up of different constituents, based on a ceramic silicon formula complex and nano aluminum oxide. Thus, the pads ensure a constant, optimal heat transfer. The lightest of touches is enough to attach them optimally. All pads are ecofriendly and RoHS-compliant. Technical Data Temperature range: -100°C / +250°C Dimensions: 100 x 100 x 2mm
The Z-Multi Water Tank from Bitspower has two screw-in POM covers, one with only one G1/4" thread and the other with three G1/4" threads. In the cover, where there is only one G1/4" thread, an adapter is already screwed in, which flows in three individual jets against the reservoir when it is used as an inlet. In the cover, with three threads, a flow pipe is installed in one of the threads, which is usually used as an inlet. If the inlet starts from the upper side, i.e. on the opposite side of the flow pipe, the outlet should not be through the flow pipe, as in the case of a water level below the pipe, air would otherwise enter the cooling circuit. Two plugs are included to close the openings that are not used. One plug is shiny silver, while the other is transparent and has a hole for an optional LED illumination. Two clamps are also included to mount the reservoir to the case or something else. Technical Data: Material: Acrylic, POM Acrylic Tube Color: Clear Dimension: 120 x 60 mm (H x Φ, +/-3%) Length without Cover: 100 mm Inner Diameter: 50 mm Thread: 4x G1/4" Scope of Delivery: 1x G1/4" Silver Shining Stop Fitting, 1x G1/4" Silver Shining Aqua-Pipe I, 1x G1/4" Silver Shining Anti-Cyclone Adapter, 1x G1/4" Crystal Stop Fitting I With 5MM LED Hole, 2x Tank Clamp
Fan speed (max): 500 Fan speed (min): 1400 Air flow rates: 60.68 Number of fans: 3 Noise: 26.5 Dimensions: 140 x 140 x 25 mm Other features: Hydraulic bearings Hardware controller RGB backlight 16.8 million colors
120mm Dual-Radiator von Alphacool, Vollkupfer-Aufbau mit schwarzem Stahl-Rahmen, bis zu vier 120-mm-Lüfter in Push/Pull-Konfiguration, 30 Millimeter Dicke und 16 FPI, 2x G1/4-Anschlüsse
The new Alphacool Eisblock XPX Aurora Edge CPU water cooler offers fantastic performance thanks to the patented ramp design as well as boasting excellent quality. The new Aurora design in combination with the addressable digital RGB illumination offers many possibilities for outstanding illumination of the CPU water block. Performance in abundance! Alphacool already developed and patented new flow technology for the first Alphacool Eisblock XPX series. The so-called "ramp system" ensures an even flow of water inside the cooler and sits in front of the diffuser plate. This ensures that the water is pressed evenly through the diffuser plate, which in turn pushes the water evenly over the cooling base. The cooling channels on the CPU cooler base has also been enlarged to a proud 34 x 32 mm to accommodate the ever-growing CPU DIEs. This is especially true for multi-core processors with 4, 6, 8 or even 12 and more CPU cores. So that the heat from the CPU can be transferred to the water as quickly as possible. 81 cooling fins can be found on the cooling plate to ensure maximum heat diffusion. The fin structure has been reduced to just 0.2 mm in order to create the largest possible surface area in the smallest possible space. And the lighting? All new Eisblock XPX Aurora Edge CPU waterblocks come with addressable digital RGB lighting. The aRGB LEDs are integrated directly into the CPU water cooler and run once around the entire cooling block. With up to 15 digital RGB LEDs the entire CPU block is evenly and intensively lit. Of course, the brightness can be controlled by an appropriate controller. And as with all aRGB LED products all known effects can be created. From simple colour changes to wave effects and rainbow lighting, everything is possible. Of course, the Alphacool Eisblock Aurora coolers can also be connected and controlled via mainboards using the standard 3-pin 5V connector. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Extension cables may be needed if you want to connect the products in series, depending on the size of the case. Is installation difficult? Mounting the XPX Aurora Edge Eisblock cooler is simple. The backplate is simply attached to the mainboard from behind. The mounting frame for the AMD or Intel socket is clamped to the cooler and the corresponding mounting screws are pre-attached to this frame. Next, you simply apply thermal paste and you attach the cooler using the screws. Please note: Remove the protective foil on the cooler base before use! Unique Aurora Design The Alphacool Eisblock Aurora Edge has been significantly changed in some points to its predecessor, the Eisblock XPX. The lower part of the cooler is completely made of brass and no longer of plexiglass or transparent nylon. This changes the overall feel and quality of the cooler. Not only is it heavier in the hand, but it is also much more stable than the usual Plexi CPU water coolers. In order to stand out visually from the normal Eisblock XPX Aurora CPU water cooler, the bottom of the cooler was kept completely in black. This emphasizes the visual effect of the water flow. The corners of the CPU cooler are more angular, which makes the cooler stand out from the normal Aurora Plexi Eisblock. Technical details Dimensions (WxTxH): 70 x 70 x 32,5 mm Net weight: 407 g Max working temperature: 60 °C Material cooler: nickel plated copper Material bottom part: brass Material top: Plexi Threads: 2 x G1/4“ Power supply Digital RGB: 3-Pin 5V Pressure tested: 1,5 Bar Certificates: CE, FC, ROHS Download manual PDF: Alphacool Eisblock XPX Aurora Edge - Plexi Black Digital RGB Download data sheet PDF: Alphacool Eisblock XPX Aurora Edge - Plexi Black Digital RGB
Thermaltake UX100 ARGB Lighting CPU Cooler - 9-high air flow blade, hydraulic bearing, and 16.8 million colors of 15 ARGB LEDs - ready to sync 5V RGB enabled motherboards from ASUS, ASRock,GIGABYTE+MSI. Switching the customized ...
Gross depth (mm): 1200.00 mm Gross height (mm): 25.00 mm Gross weight: 0.16 kg Gross width (mm): 120.00 mm Net weight: 0.14 kg Packing quantity: 1.00 pc(s) Paper/Pasteboard: 20.00 g Tare weight (kg): 0.02 kg Volume (m3): 0.00 m³ Embeeded battery: No WEEE tax: No
Kit aus drei 120-mm-PWM-Lüftern, digital adressierbare RGB-LED-Beleuchtung (3-Pin), Drehzahl von max. 1.500 U/min, transparenter Rahmen und Lüfterblätter, inklusive Schrauben
OPTIMISED FOR STATIC PRESSURE During the development of the new P8 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the P8 PWM PST is particularly suitable for use on heatsinks and radiators. MORE EFFICIENT TECHNOLOGY The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the new P8 PWM PST to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without comprimising the performance. MAXIMUM QUIETNESS, MINIMUM VIBRATION Even at low speeds the operating sound of the new ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the new motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the new motor. EXTENDED LIFE SPAN A 10 °C lower motor temperature roughly doubles the life span of a fan. The new ARCTIC motor has a four times longer service life through its low coil temperature. Therefore Arctic extends the warranty to 10 years. 200 TO 3000 RPM REGULATED VIA PWM PST Thanks to the 4-pin connector, the RPM can be regulated in a broad spectrum via PWM. In this way, noise is kept at a minimum while maximum cooling performance is guaranteed when needed. HIGH QUALITY BEARING Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan. Technical Data Performance Fan Speed: 200 - 3000 rpm Airflow: 23.4 CFM / 40.3 m³/h Static Pressure: 1 (mm/H2O) Noise Level: 0.3 Sone Fan Fan Frame: Standard Controll Typ: PST Connector: 4-Pin Connector + 4 Pin Socket Fan Bearing: Fluid Dynamic Bearing Electric Characteristics: Typical Voltage: 12 V DC Starting Voltage: 0 V Current: 0.09 A Cable Lenght: 400 mm Size & Weight Lenght: 80 mm Width: 80 mm Height: 25 mm Weight: 81 g
Silent Wings 4 120mm combines all features of a virtually inaudible with an extremely performant fan for the most demanding applications. Optimized fan blades for the highest performance. Small tip clearance and a fan frame with funnel-shaped air outlets for extremely high air pressure. Virtually inaudible operation at regular speed. 6-pole fan motor and fluid-dynamic bearing for less vibration and very smooth operations. Anti-vibration mounting with push pins and screwed installation option. Super-long lifespan of up to 300,000h. Elegant look with high-grade fan sticker in an all-black design.
Mit Scharm und Reserve - In unser flottes M.2 NVMe/NGFF SSD Gehäuse G-M202-AC-10G wird Deine M.2 SSD ganz ohne Werkzeug installiert. Zusätzlich bietet unser Gehäuse noch Schutz und Unterschlupf für eine weitere M.2 SSD in der integrierten Aufbewahrungsbox. SCHNELLE ÜBERTRAGUNGSRATE | Unterstützt PCIe 3.0 x2 Datentransferraten von bis zu 10 Gbit/s | Unterstützt SATA III Datentransferraten von bis zu 6 Gbit/s CHIPSATZ | RTL9210B-CG | für breite Kompatibilität BREITE KOMPATIBILITÄT | Unterstützt PCIe NVMe M.2 SSD mit M-Key und M.2 SATA NGFF SSD mit B-Key & M+B Key FLEXIBLER M.2_EINBAU | Unterstützt M.2 SSDs der Längen 2230, 2242, 2260, 2280 EINZIGARTIGES DESIGN | Schutzbox als Aufbewahrungsbox für eine weitere M.2 SSD EINFACHE INSTALLATION | Werkzeuglos MEHRFACHE ZUBEHÖRE | 5x Wärmeleitpads, 2x Fixierer, 1x Type-C zu Type-C Kabel, 1x Type-A zu Type-C Kabel, 1x Handbuch, 1x Garantiekarte Technische Details: Produktabmessungen: 10.7 x 4.3 x 2.2 cm; 190 Gramm Lieferumfang: 5x Silikon Wärmeleitpad, 1x Type-C® to Type-C® Kabel, 1x Type-C® to Type-A Kabe, 2x Silikon-Fixierung
With the Core Ocean AiO, Alphacool presents an all-in-one solution that, thanks to its excellent price-performance ratio, enables entry into performance-oriented CPU water cooling. The difference to the Eisbaer CPU AiO is that the Ocean All-in-One is not expandable. Adding further components such as GPU coolers, radiators or expansion tanks is not intended here. But also not necessary! The choice of components and the design of the Core Ocean enable a long service life with low maintenance for water cooling of all common mainstream sockets from AMD and Intel. Aluminium Radiator Compared to Alphacool's full copper models, the T38 aluminium radiator has additional cooling channels. This technical design allows a significant increase in cooling capacity without restricting the water flow within the radiator. Due to the low height of 38mm, the radiator with single-sided fan assembly fits into the tightest case and enables high-performance water cooling of the CPU. Core fan The fan can be regulated from 0 to 2500 rpm via the 4-pin PWM connection. The cable is 40cm long. This allows the fan to be connected to the mainboard or a special controller without the need for additional adapter cables or extensions. At 2500 rpm, it provides an air flow of 62.8 CFM, together with a high static pressure of 2.13mm/H2O. This makes the fan perfect for mounting on radiators of a water cooling system. Cooler & Pump As with all Alphacool products, the radiator base is made of copper and is equipped with very fine cooling fins distributed over the entire base. A nozzle plate ensures an accelerated flow over the cooling fins, which increases the cooling performance. The water flow is optimised so that all areas of the cooler base are cooled evenly. The cooler is compatible with all common mainstream sockets from AMD and Intel. The built-in pump has a speed range of 2500 - 3500 RPM (+/- 10%) and can be controlled via PWM. The pump is connected to the mainboard or to an external controller via the existing 4-pin fan connector. This allows the speed range of the pump to be controlled and monitored. Hoses & Connections The FEP hoses are 40cm long, sleeved and very flexible. The rotatable 360° connections to the cooler and to the radiator are permanently installed and cannot be replaced. However, the combination of hoses and connectors allows a very variable positioning of the AiO even in the tightest PC case. Illumination 12 digitally addressable 5V RGB LEDs are installed in the pump housing, which create a unique, very noble-looking illumination. The digital aRGB LED lighting is connected via a JST 3-pin connector. To control the lighting, the 3-pin female connector must be connected to a digital RGB controller (not included) or a digital RGB-capable mainboard. Additional digital RGB LEDs can be connected to the remaining 3-pin male connector. Thermal compound The thermal paste included in the delivery has a thermal conductivity of 7.5 W/mK. The thermal grease does not harden, is particularly suitable for high contact pressures and can be applied perfectly due to the optimally selected viscosity. Compatibility: Intel: LGA 115x / LGA 1200 / LGA 1700 / LGA 2066 AMD: AM4 / AM5 Technical data radiator L x W x H 397 x 120 x 38mm Material cooling fins, channels & prechamber 3003 Aluminium Material outer housing & threads 3003 Aluminium Fins per Inch 19 Fan size 120mm Fan slots 3 one-sided / 6 double-sided Color black Technical data fans L x W x H 120 x 120 x 25mm Bearing Type hydraulic Bearing Rated Voltage DC 12V Operating Voltage DC 7-14V Start-up Voltage 7V Rated Current 0.23 (Max. 0.4) A Rated Power 2.76 (Max. 4.8) W Rated Speed 0 - 2500rpm/min (±10%) Max. Air Flow 62.8CFM Max.Static Pressure 2.13mm-H2O Noise level (rated voltage, mute room, distance 1m) 33.0 (Max. 34.3) dBA MTBF 50000hrs at 25°C Speed Control Mode PWM Connection & control 4-pin PWM (cable 40cm) Auto-Restart yes Tachometer Output yes Color black Technical data cooler & pump L x W x H 70,2 x 70,2 x 46mm Material cooler bottom copper Material pump housing Synthetic material (ABS+PC) Fin structure cooler bottom 0,1 x 0,1mm Material pump bearing & shaft ceramics Starting voltage > DC 6V Rated power 7.1W Noise level 35Db Rated Current 0.59A (±10% MAX) Speed 2500~3500 (±10% RPM) Power supply Digital aRGB 3-pin 5V (male & female, cable length 30cm) Number of aRGB LEDs 12 Power supply pump 4-Pin JST (Kabellänge 30cm) Technical data tubes Material FEP, black with weave cover Length 400mm
All-in-one water cooling in white, 360mm radiator, pump cover with configurable IPS display, high-performance Asetek PWM pump, three SL-INF 120mm ARGB PWM fans, elegant design and quiet operation, compatible with AMD and Intel sockets (including AM5 and LGA 1700).
The Alpenföhn Panorama 2 CPU Cooler is a compact and powerful CPU cooler designed with a top-blower design. It features four 6mm heatpipes and a quiet 92mm JetStream fan with PWM connection. It offers high compatibility with sockets and RAM, and has a 95 Watt TDP. The cooler has dimensions of 13cm x 10cm x 13cm and a net weight of 580g.
SWAFAN EX14 ARGB brings magnetic force design to ARGB fans while keeping the iconic swappable fan blade design. Daisy-chaining up to 3 fans per cable improves fan connection efficiency and convenience while enhancing cable management for PC building.
