The Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF with Backplate combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 DUAL/TUF is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical details L x W x H 143 x 240 x 24,5 mm Material cooler Nickle-plated copper Material cooler top POM clear Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : - ASUS TUF Gaming GeForce RTX 3070 OC, TUF-RTX3070-O8G-GAMING, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ6-M0NA00) - ASUS TUF Gaming GeForce RTX 3070, TUF-RTX3070-8G-GAMING, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ7-M0NA00) - ASUS Dual GeForce RTX 3070 OC, DUAL-RTX3070-O8G, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ0-M0NA00) - ASUS Dual GeForce RTX 3070, DUAL-RTX3070-8G, 8GB GDDR6, 2x HDMI, 3x DP (90YV0FQ1-M0NA00) Download Datasheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 TUF/DUAL with Backplate Download Manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 TUF/DUAL with Backplate
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 13/10mm 40cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 13/10mm 60cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 40cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 10/30cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
EK-Loop Connect Level Sensor TBE 60 is a coolant level sensor provides a warning when the reservoir reaches a point where it would be prudent to top it off. Due to the coolant evaporation through the tubing, it makes sure the pump never runs dry. Also, in case of a leak, it warns you of the coolant level being below its optimal value. It attaches to the tube of the EK tubular-style reservoirs with 60mm diameter and connects via a dedicated cable to the EK-Loop Connect control unit. Technical Specifications: Connectors: 4-pin Length: 50cm
Einzelner 120-mm-PWM-Lüfter in Weiß, einzigartiges Stecksystem für weniger Kabelsalat, mit adressierbaren RGB-LEDs, bis zu 1.900 U/min mit max. 109,6 m³/h Fördervolumen, max. 2,62 mmH2O statischer Druck, Hinweis: Benötigt Lian Li UNI HUB (LULI-024/LULI-025)
EK Water Blocks EK-Torque STC-13/10 color ring pack of 10, red. These exchangeable rings for the 13 / 10mm soft tube compression fittings from EKWB are made of aluminum, are available in different colors and give your system a unique look. Compatibility: EK-Quantum Torque STC-13/10 connections Technical specifications: Red color Material: aluminum Quantity: 10 pieces
The Protium expansion tank from Singularity Computers is a 150mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 189mm. It has a total of seven G1/4" ports and the tube itself is made of acrylic. Technical Data Dimensions: 60 × 60 x 189 mm (L x W x H) Diameter: 60 mm Material: acrylic (reservoir, lid, base), aluminium (retention rings) Color: transparent, black/li> Ports: 7x G1/4" Scope of delivery: 1x 150 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Content: 5 ml (for 10 to 20 applications) Application temperature: -20 ° C to 110 ° C Red color Curing time: 30 min at 20 ° C Typical application: CPUs, GPUs, notebooks, ICs
EK-UNI Pump Bracket (120mm FAN) Vertical is a horizontal and vertical mounting adapter for pump and combo unit installation. It is compatible with EK-XTOP Revo D5, EK-XTOP Revo DDC, EK-XTOP SPC pumps and EK-XRES Revo D5, EK-Xres DDC, EK-XRES SPC combo units. The bracket mounts to any 120mm fan hole pattern. This product is compatible with the following EK products: EK-XRES Revo D5 series EK-XTOP Revo D5 series EK-XRES DDC series EK-XTOP DDC series EK-XRES SPC series EK-XTOP SPC series Scope of Delivery EK-UNI Pump Bracket (120mm Fan) Vertical 5x polyamide washer M4 5x screws M4x6 DIN7984 5x nut M4 Allen key 2,5
Full-Block-Wasserkühler von Alphacool, optimierter Wärmeaustausch durch vernickeltes Kupfer, stylishe RGB-Beleuchtung, für RTX 3080/3080 Ti XC3 Ultra Gaming Grafikkarten von EVGA, NVLink kompatibel
The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800XT/6900XT Gaming OC is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data cooler L x W x H 281,5 x 130,5 x 24,5 mm Material cooler Nickle-plated copper Material cooler top POM clear Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V x Technical data backplate L x W x H 281,5 x 106 x 6 mm Material Aluminium Color Black Compatibility list: - Gigabyte Radeon RX 6800 XT Gaming OC 16G (GV-R68XTGAMING OC-16GD) - Gigabyte Radeon RX 6900 XT Gaming OC 16G (GV-R69XTGAMING OC-16GD) - Gigabyte Radeon RX 6950 XT Gaming OC 16G (GV-R695XTGAMING OC-16GD) Downloads: Datasheet PDF | Manual PDF | AMD List of Compatibility PDF Links: Graphics Card Configurator
The Alphacool Eisblock Aurora GPX-N Acrylic Active Backplate for Geforce RTX 3080/3090 graphics cards is the perfect upgrade for Alphacool's Eisblock Aurora Acrylic GPX-N GPU custom water coolers (see compatibility details). With the help of the backplate, consisting of nickel-plated copper, the back of Geforce RTX 3080/3090 graphics cards can now also be actively water-cooled, thus achieving a significant increase in cooling performance. Connection options There are 2 different ways to incorporate the backplate into your existing watercooling loop: Variant 1 The cooler has an inlet and outlet with G1/4" internal thread on the top side respectively. With suitable connections and hoses/hard tubes, the backplate can be easily integrated into the water circuit. Variant 2 The cooler has an inlet and outlet on the side suitable for 5/3mm hoses. With the help of Alphacool's MCX 2x manifold with 5/3mm tubing (item 1022250), the active backplate can be easily integrated into the water circuit in a space-saving way. This variant is a sensible choice if there is little space in the PC case and tubing runs will be difficult to do. (Note: Only works with Eisblock Aurora Acryl/ES Acetal GPX-N GPU custom water coolers. Cannot be used in combination with Alphacool Eiswolf 2 AIOs!) The connection options are very flexible for both variants, as the inlet and outlet can be freely selected depending on the design. Brilliant illumination Six addressable digital RGB LEDs are directly recessed and run along the sides of the entire cooling block. This illuminates the entire cooling block and creates unique lighting effects. The Digital aRGB LED lighting is connected via a JST 3-pin connector and can be controlled with a Digital RGB controller (e.g. Alphacool Aurora Eiscontrol, Art.15360) or a Digital RGB capable motherboard. Compatibility: - Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 TI Founders Edition with Backplate (article number: 13056) Technical data L x W x H 220,5 x 121,4 x 13,3 mm Material backplate copper, nickel-plated Material cooler acrylic Threads Water cooling 2x G1/4" | 2x 5/3mm tube connection Illumination 6x digital addressable RGB LEDs Power connector digital aRGB LEDs 3-pin JST (male & female switch) Power digital aRGB LEDs 5V Maximum working temperature 60 °C Pressure tested 0,8 Bar Weight 753 g
Build your own AIO water cooling system. Alongside the different prefilled Eisbaer Aurora CPU AIO watercoolers that can be used "Out of the Box", the core of the Eisbaer Aurora is also available as a solo version. With it you can decide how you want to build your water cooling loop and which parts you want to use for it. By using the industry standard G1/4" ports, all fittings from the water cooling sector can be used. This gives you the ability to choose the hose thickness, colour, style, and liquid freely. The Eisbaer Aurora gives you full control. Pump and cooler The basis of the pump is the Alphacool DC-LT 2 Ceramic pump which is also available separately. The pump is powerful enough to operate a circuit consisting of a radiator, a CPU block, and a graphics card water cooler. It is incredibly quiet, almost inaudible. The cold plate is made of nickel-plated copper and offers excellent heat transfer. Due to the fine fin structure of the cooler bottom and the optimized water flow, the cooling performance is comparable to the best DIY water coolers on the market. No compromises have been made in terms of performance in favour of other features. Design and lighting The Eisbaer Aurora Solo is equipped with addressable digital RGB LEDs. The aRGB LEDs can be connected to any 3-pin 5V connector and controlled easily. The housing is decorated with a polar bear, through which the LEDs shine. Due to the extensive control possibilities of Digital RGB LEDs numerous effects can be displayed. Compatibility: Intel 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / TR4 / sTRX4 / AM5 Technical data pump housing L x W x H 66 x 66 x 69 mm Material reservoir Transparent Nylon Threads 2x G1/4” Connection Digital aRGB 3-Pin JST + 3-Pin 5V Quantity Digital aRGB LED 10 Technical data pump Speed 2600 RPM Voltage 12V DC Power consumption 4 W Maximum flow rate 75L/h Maximum head 0,95m Other technical data Net weight 223 g Max working temperature 60 °C Pressure tested 0,8 Bar
The Alphacool Eisbaer Pro Aurora offers a much larger cooling surface than the normal Eisbaer Aurora. It was specially developed for extremely large CPU DIEs and fully covers processors such as the AMD Threadripper but also the AMD Ryzen CPUs. The Eisbaer Pro has also been designed for the Intel Socket 3647 to ensure the best possible cooling performance of the entire CPU. The Eisbaer Pro Aurora is a true multi-talent. Expandable, fully compatible with DIY water cooling components and it is the optimal solution for the most powerful processors on the market. Large cooling surface The cold plate bottom covers the entire surface of the respective processors. The area of the cooling fins exceeds all known processor cores with an area of around 55 x 42mm. This ensures that all hotspots of a CPU are directly covered and thus optimally cooled. With the included AM4 bracket, cooling an AMD Ryzen processor is also child's play. The cooling fins are 0.4mm thick and also have an optimal distance of 0.4mm between them. In total there are 58 cooling fins on the bottom of the cooler. The bottom of the cooler is only 3mm thick, which allows the heat to reach the water and be dissipated as quickly as possible. Pump The Eisbaer Pro Aurora cooler uses the very compact and small DC-LT 2 pump. It offers enough power to integrate other components such as a GPU water cooler or radiator into the water circuit. Lighting The entire Eisbaer Pro Aurora cooler is equipped with addressable, digital RGB LEDs. This makes it a real eye-catcher in the case. Of course, all digital RGB LEDs can be controlled as desired. Depending on the controller, almost all effects are possible. Usable fittings Connections that are too large mean that the fill port can no longer be used. We recommend the following: - up to and including 13/10 without restriction - 16/10 only in angled version - Connections larger than 16/10 should not be used Compatibility: Intel: 1700 / 2011 / 2011-3 / 2066 / 3647 Narrow & Square / LGA 4189 AMD: AM4 / TR4 / sTRX4 / SP3 / sWRX8 / AM5 Technical data cooler with pump L x W x H 64 x 79 x 54,3mm Material cooler bottom nickel plated copper Material cooler top acrylic Threads 2x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow 75 L/h Voltage 12V DC Power consumption 4W Pressure tested 0,8 Bar Maximum working temperature 60°C Number of LEDs 10x Digital aRGB LEDs
The Eisbaer Aurora LT Solo combines CPU cooling block, reservoir and pump in one product. The low construction height allows flexible use in a wide range of scenarios. Especially in small cases with little space, the Eisbaer Aurora LT Solo can convince. The product is also used as the basis of Alphacool's popular AiO water coolers. Radiator & Pump As with all Alphacool products, the radiator base is made of nickel-plated copper and is equipped with very fine cooling fins that are distributed over the entire base. A nozzle plate provides an accelerated flow over the cooling fins which increases the cooling performance. The water flow is optimized so that all areas of the cooler base are cooled evenly. The Eisbaer LT Aurora cooler uses the very compact and small DC-LT 2 pump. It provides enough power to add another component such as a GPU water cooler or another radiator to the circuit. Full Digital aRGB Illumination The cooler pump assembly and fans are fully equipped with Digital RGB LEDs, also known as addressable RGB or aRGB. Extensive effects can be set with the included controller or a Digital RGB controller on the motherboard. For a nice visual effect, of course, the illuminated polar bear on the cooler pump unit. For easier control via a controller, the fans and also the pump can be connected in series as a daisy chain. This enables a neat wiring of the individual LED components. Compatibility: Intel: 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM4 / AM5 / TR4 / sTRX4 / sWRX / SP3 Technical data cooler with pump L x W x H 69 x 69 x 45mm Material cooler bottom nickel plated copper Material cooler top acrylic Threads 2x G1/4“ (+ 1x Fillport G1/4“) Pump type DC-LT2 Pump speed 2600 rpm (+/- 10%) Head of delivery 0,95 m Maximum flow 75 L/h Voltage 12V DC Power consumption 4W Pressure tested 0,8 Bar Maximum working temperature 60°C
With the Eisblock Aurora XP³ light you get a very compact CPU water block for all current mainstream sockets from AMD and Intel. It offers the typical high Alphacool quality paired with excellent performance at a fantastic price. High cooling capacity! The cooling plate has been optimised to give the best performance for the price point. The nickel-plated copper radiator bottom has a surface area of 56 x 56 mm with a cross-slot structure and only 0.4 x 1 mm thick pins through which the water can flow. Due to the extremely large cooling surface, the water can effectively absorb the heat from the radiator bottom and remove it from the CPU area. The pin area is about 27.6 x 37.6 mm ensuring that most mainstream CPUs are covered completely which guarantees high cooling performance. The new multiple slotted nozzle plate was developed especially for this cooler to achieve a perfect interplay of water flow and inflow of the base plate. Only the combination of all these little things ensures the high performance. Let’s Have All the Colours! 9 digital RGB LEDs in a U-shaped configuration are inside the Alphacool Eisblock Aurora XP³. This ensures penetrating and extensive lighting. With the right addressable Digital RGB Controller each LED can be controlled individually. All known effects and colours can be displayed as desired. The connection is made via the usual 3-pin 5V connector. The outgoing cable has an integrated Y-adapter so you can easily and quickly connect several Aurora products together. This means that you don’t have to buy any special cables and means that you can create a cleaner look as you don’t have as many cables. Quick assembly! The mounting bracket is simply put over the CPU cooler. All mounting screws can be pre-assembled onto this Then you can simply screw it down. A well-illustrated manual with large render graphics is included so that the installation is easy to understand. The Eisblock Aurora XP³ Light offers not only a visual masterpiece with an extensive addressable digital RGB LED lighting, it also offers high performance thanks to the many small technical details. Compatibility: Intel: 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM5 / AM4 / AM3+ / AM3 / AM2 Technical data L x W x H 73 x 63 x 21mm Weigth 136g Max working temperature 60°C Material cooling plate nickel plated copper Material cooler top Acryl Connections 2 x G1/4" Pressure tested 0,8Bar Power connector Digital RGB 3-Pin 5V
The Alphacool Eisblock XPX 1U is the Enterprise Solutions version of the well-known and popular Eisblock XPX CPU water cooler. It has been specially optimized for use in 1U server racks and has extended connection options. This allows for more connection options in the very tight 1U server racks and integrate it easily into a cooling loop. Many Connection Options Thanks to its extremely flat design, the Eisblock XPX 1U fits into any 1U server case. Due to the flat design of a 1U server rack, no inlets or outlets can be used on top of the CPU cooler as the total height of the CPU cooler including the fittings would no longer fit. Therefore, the Eisblock XPX 1U has further connection possibilities on the side of the cooler. There are altogether 3 x IN and 4 x OUT, with 2 x In and 3 x OUT mounted on the side. Straight fittings up to a size of 13/10 mm can be connected at the side. The Alphacool TPV connectors, which were specially developed for the Enterprise Solutions series, are ideal. Larger fittings can be used, but only in specific circumstances with angled adapters. The fittings on top of the CPU cooler can of course be used as usual with all connections up to a size of 16 mm outside diameter, no matter whether for soft tube or HardTubes. High Performance The Eisblock XPX has been called the most powerful CPU water cooler by many independent media. This also applies to the Eisblock XPX 1U as it contains the same technology. The only slight change is to the patented ramp system for optimal waterflow. This has been adapted to allow the new lateral connections. The base plate offers 81 cooling fins covering an area of 34 x 32 mm. The fins are only 0.2 mm thick. This allows for the largest possible area for heat dissipation through the water. Simple Assembly The backplate is attached to the mainboard from behind. Then the mounting frame and the mounting screws (which can be pre-assembled seperately) are attached directly on the CPU block. Then it is a simple job of screwing the CPU block and mounting frame to the backplate. Mounting material for all mainstream sockets from AMD and Intel is included. We do not include the mounting materials for some Intel Xeon sockets and the AMD Threadripper as we recommend the Eisblock XPX Pro series for these. The pro series offers adapted mounting material and an enlarged cooling surface for these oversized processors. Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data Dimensions 65 x 65 x 25,5mm Colour Black Weigth 170g Max working temperature 60°C Material cooling plate nickel plated copper Material cooler top Acetal Connections 7 x G1/4" (3 x IN, 4 x OUT) Pressure tested 0,8Bar
The Alphacool XPX Eisblock is the newest generation in the CPU watercooling field and offers not only outstanding cooling performance but also many ways to customize your cooler. The mounting bracket, the aluminium cap, and even the logo can all be switched out for different colour variants. Highlights - Highest cooling performance - Elegant aluminium cover - Individual design options for appearance customization - Patented “Ramping” system for increasing performance The Alphacool Eisblock XPX cooler is the newest innovation in the CPU cooler field, developed by Alphacool. The XPX cooler’s performance has gotten a major upgrade compared to its predecessor, the NexXxoS XP3. This was only possible because Alphacool completely re-developed the Eisblock XPX cooler from the ground up. For one, the fin structure was refined to 0.2mm and the fin count raised to 81 fins. This makes for a much larger cooling surface through which water can flow. In order to ensure the water is evenly distributed over the cooling fins, Alphacool developed and patented the “Ramp”. It ensures there is no turbulence in the water flow over cooling fins, which would lead to uneven water distribution over the cooling fins. Alphacool also used a double distributor to ensure less resistance. Paired with the ramp, this means the pump pressure plays little to no role in the performance of the cooler. You can turn the pump power down and run your system even more quietly without losing any cooling power. The bottom area of the XPX Eisblock has been optimized for CPUs with large DIE, as the cooling surface onto which the water actually flows was enlarged to 34 x 32mm, meaning even large 10 core CPUs present no problem. The bracket was also adjusted and simplified. This means new brackets for any socket type can be produced easily if required later. The aluminium frames also come in the same colours as the cooler itself. Alphacool has catered to users looking for customized design options, since the aluminium body which covers the entire cooler can be switched out for other models in different colours. Even the mounting kit can be colour-coordinated. For the illuminated Alphacool logo, alternative insets in different colours are available. This way, every user can build a cooler in whatever colour they desire while also owning one of – if not the – most high-performance CPU coolers on the current market. Compatibility: Intel: 775 / 1056 / 1155 / 1150 / 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AMD: AM2 / AM2+ / AM3 / AM3+ / FM1 / FM2 / FM2+ / AM4 / AM5 Technical data Dimensions 65 x 65 x 30mm Colour Black sandblasted Weigth 461g Max working temperature 60°C Material cooling plate nickel plated copper Material cooler top Aluminium / Acetal Connections 2 x G1/4" Pressure tested 0,8Bar
The Alphacool XPX Aurora Pro Light is the little sister of the XPX Pro CPU liquid cooling block. It offers a clearer design but does without the ramp system of the XPX Pro models. This eliminates the view of the water channels, giving a much clearer look to the coolant. Like the other XPX Pro models, the cooler has been specially optimized for AMD Threadripper, Intel LGA 3647 and 2011/2066 processors. How is the CPU cooler illuminated? As with all new Eisblock CPU water coolers, Alphacool uses an integrated aRGB solution. Under the black frame there are 14 Digital RGB LEDs are mounted around the entire cooler. Each of these 5V aRGB LEDs can be controlled separately. This means that all known effects are possible, depending on the selected controller. There are controllers are available from Alphacool, but also many mainboards offer a 3-pin 5V aRGB connector to control the LEDs of the Eisblock Aurora Pro Light. The cable ends in a 3-pin JST connector with integrated Y-adapter to connect further Alphacool components directly. A corresponding 3-pin JST to 3-pin V adapter is included in the delivery. Extremely powerful The coldplate has been specially optimized for the large processor cores. A total of 147 cooling fins run over an area of around 42 x 58.6 mm. For comparison: An Alphacool XPX Aurora Eisblock requires only 81 cooling fins to completely cover the processor core of a normal CPU. Both coolers use the same type of fins with a thickness of only 0.2 mm. This clearly shows how far Alphacool has gone in order to offer the best possible performance. The entire cooler base is of course made of nickel-plated copper and not aluminium. This is because the thermal conductivity of copper is known to be almost twice as high as that of aluminium. Is installation difficult? The assembly is extremely easy. You remove the protective foil from the cooler bottom, spread some of the enclosed thermal paste on the CPU and then attach the cooler. Depending on the base, the mounting screws are screwed on before or after the cooler is put on. No tools are necessary for the installation. Alphacool uses knurled screws, which allow a quick and easy installation. Compatibility: Compatibility Intel: 2011 / 2011-3 / 2066 / 3647 / 1700 AMD Compatibility: TR4 / TRX40 / sWRX8 / SP3 / AM4 / AM5 Technical data GPU cooler W x T x H 63,8 x 79 x 22,5 mm Net weight 205 g Max working temperature 60 °C Material cooler nickel plated copper Material top POM clear Thickness cooling fins 0,2 mm Threads 2 x G1/4“ Power supply Digital RGB Digital RGB LEDs 3-Pin JST (with integrated Y-Splitter) Pressure tested 0,8 bar Certificates CE, FC, ROHS
The new generation of Alphacool GPU coolers has arrived! The Alphacool Eisblock Aurora Plexi GPX combines outstanding performance with breath-taking aesthetics. What has changed? This is where Alphacool's 16 years of experience pays off! The already powerful Eisblocks have been further optimized: A new look, thinner thermal pads (1mm), a thinner copper block (5.5mm) and a significantly improved flow rate are just some of the important changes. And the design? This time Alphacool puts the lighting more in the foreground! Along the entire cooling block there are addressable digital RGB LEDs, so that no corner of your case remains in the dark. The more angular design compared to its predecessors further enhances this effect. What else? There have been no compromises with the materials and the cooling block is still 100% copper. Now however, the nickel-plating of the cooler has been further optimised. This increases acid resistance and almost eliminates the risk of chipping the nickel-plating. A further highlight is the use of the patented Alphacool stop plugs: These sit flush with the surface of the cooler and form a flat surface when screwed in. No more annoying protruding stop fittings! Finally, the branding of the Eisblock has been adapted. It is now much more discreet and fits perfectly into the already elegant appearance. With this product Alphacool has once again proven its technical know-how! Check it out for yourself and let your system shine in a new light! Technical Details: W x T x H: 144 x 269,5 x 25 mm Max Working Temperature: 60 °C Material Cooler: Nickel-Plated Copper Material Top: Plexiglass Threads: 4x G1/4“ Power Supply Digital RGB: 3-Pin 5V (0,5A) Pressure Tested: 1,5 bar Compatibility: ASRock Radeon RX 5700 XT TAICHI X 8G OC+, 8GB GDDR6, 2x HDMI, 4x DisplayPort Graphics Card Configurator: Click here! List of Compatibility: AMD Cooler PDF Manual: Eisblock Aurora Plexi GPX-A AMD Radeon RX 5700 XT Asrock Taichi X8 8G OC PDF Data Sheet: Eisblock Aurora Plexi GPX-A AMD Radeon RX 5700 XT Asrock Taichi X8 8G OC
The new generation of Alphacool GPU coolers has arrived! The Alphacool Eisblock Aurora Plexi GPX combines outstanding performance with breath-taking aesthetics. What has changed? This is where Alphacool's 16 years of experience pays off! The already powerful Eisblocks have been further optimized: A new look, thinner thermal pads (1mm), a thinner copper block (5.5mm) and a significantly improved flow rate are just some of the important changes. And the design? This time Alphacool puts the lighting more in the foreground! Along the entire cooling block there are addressable digital RGB LEDs, so that no corner of your case remains in the dark. The more angular design compared to its predecessors further enhances this effect. What else? There have been no compromises with the materials and the cooling block is still 100% copper. Now however, the nickel-plating of the cooler has been further optimised. This increases acid resistance and almost eliminates the risk of chipping the nickel-plating. A further highlight is the use of the patented Alphacool stop plugs: These sit flush with the surface of the cooler and form a flat surface when screwed in. No more annoying protruding stop fittings! Finally, the branding of the Eisblock has been adapted. It is now much more discreet and fits perfectly into the already elegant appearance. With this product Alphacool has once again proven its technical know-how! Check it out for yourself and let your system shine in a new light! Technical Details: W x T x H: 122 x 266,5 x 25 mm Max Working Temperature: 60 °C Material Cooler: Nickel-Plated Copper Material Top: Plexiglass Threads: 4x G1/4“ Power Supply Digital RGB: 3-Pin 5V (0,5A) Pressure Tested: 1,5 bar Compatibility: AMD Radeon RX 5700 XT XFX Thicc II / III Graphics Card Configurator: Click here! List of Compatibility: AMD Cooler PDF Manual: Alphacool Eisblock Aurora Plexi GPX-A AMD Radeon RX 5700 XT XFX Thicc II / III PDF Data Sheet: Alphacool Eisblock Aurora Plexi GPX-A AMD Radeon RX 5700 XT XFX Thicc II / III
