 Alphacool Eisblock Aurora GPX-N RTX 4080 FE mit Backplate - Acryl (13497) Full-Block-Wasserkühler von Alphacool, für NVIDIA GeForce RTX 4080 Founders Edition Grafikkarten, verchromter Kupferkühlkörper, mit Backplate | 2 | 108,60 € | Vaata | ||
 Alphacool CPU Cooler Eisblock XPX Aurora PRO - Acryl Black Digital RGB With the Alphacool XPX Aurora Pro Eisblock, Alphacool offers a CPU water cooler specially designed for processors with particularly large processor cores. These currently include the AMD Threadripper models and processors from Intel for the LGA 2066 socket and the LGA 3647 server socket in narrow ILM design. As a CPU cooler from the Aurora Design line, the CPU cooler naturally offers integrated digital aRGB lighting. Extremely powerful The cooler base has been specially optimized for the large processor cores. With an area of 42 x 58.6 mm and 147 cooling fins the cooling area has been significantly increased. As a comparison, an Alphacool XPX Aurora Eisblock has 81 cooling fins to completely cover the processor core of a normal CPU. Both coolers use the same fin type with a thickness of only 0.2 mm. This clearly shows how far Alphacool has gone to offer the best possible performance. The entire cooler base is of course made of nickel-plated copper and not aluminium. This is due to the increased thermal conductivity of copper. It is almost twice as high as that of aluminium. How is the CPU cooler illuminated? As with all new Eisblock CPU water coolers, Alphacool relies on an integrated aRGB solution. An aluminium frame is flush with the CPU cooler. Of course, the aluminium does not come into contact with the water. The LED frame contains up to 14 addressable digital RGB LEDs. This is more than enough to illuminate the entire cooler even and brightly. The intensity of the illumination can of course be controlled by an appropriate controller. Due to the use of digital RGB LEDs, all known effects can be created, because each LED can be controlled separately with the right controller. The Alphacool Eisblock Aurora Pro cooler can also be connected and controlled via the 3-pin 5V connector on any compatible mainboard. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Only additional extension cables may be needed if you want to connect the products in series. Is the assembly difficult? Installation is child's play. Remove the protective film from the base of the cooler, apply some of the enclosed thermal paste to the CPU and then attach the cooler to the board. Depending on the base, the mounting screws are either screwed on before or after mounting. No tools are necessary for the assembly. Alphacool uses knurled screws, which allow a quick and easy assembly. Finally Acryl! The Alphacool Eisblock XPX Aurora Pro is the technical brother of the Eisblock XPX Pro 1U cooler, which was developed especially for the use in server housings. During the development the functionality had a much higher priority than the design, which was kept practical and discreet. The Eisblock XPX Aurora Pro has been optically adapted to the Aurora products and now offers the same design features as you are used to from the Aurora series. This allows you to perfectly match your entire system to each other optically and you don't have to make any compromises. Thanks to the plexiglass look, you can see the water flow beautifully. On the Plexi there is a black frame embedded with a very discreet Alphacool logo in one corner. Compatibility: Compatibility Intel: 2011 / 2011-3 / 2066 / 3647 / 1700 AMD Compatibility: TR4 / TRX40 / sWRX8 / SP3 / AM4 / AM5 Technical data GPU cooler W x T x H 79 x 63,8 x 31 mm Net weight 545 g Max working temperature 60 °C Material cooler nickel plated copper Material bottom part brass Material top Acryl Threads 2 x G1/4“ Power supply Digital RGB 3-Pin 5V Pressure tested 0,8 bar Certificates CE, FC, ROHS | 2 | 74,05 € | Vaata | ||
 Deepcool FC120 ARGB 120mm ventilaatorid, 3-pakk, valge Designed with precision, the FC120 features an enhanced static pressure of 1.83mmAq and concentrated airflow of up to 61.91 CFM for outstanding cooling performance. A hydro bearing allows for a fan speed of 500~1800 RPM±10% with PWM to keep noise to a minimum. Each FC120 fan features a single cable that transmits both power and RGB data signals, that can be daisy-chained in a series of fans to reduce cable clutter. Interconnecting the fans, removes the need for a fan hub and makes it easy to synchronize PWM and RGB fan controls for up to 4 fans | 2 | 32,89 € | Vaata | ||
 Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix with Backplate The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix with backplate combines style with performance and extensive digital RGB lighting. With experience of over 17 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock. More Performance! During the development of the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6700XT TUF/Rog Strix with backplate is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technicla data cooler L x W x H 271 x 141,74 x 24,35 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technicla data backplate L x W x H 271 x 117,24 x 6 mm Material Aluminium Color Black Compatibility list: - ASUS ROG Strix Radeon RX 6700 XT OC, ROG-STRIX-RX6700XT-O12G-GAMING, 12GB GDDR6, HDMI, 3x DP - ASUS TUF Gaming Radeon RX 6700 XT OC, TUF-RX6700XT-O12G-GAMING, 12GB GDDR6, HDMI, 3x DP Downloads: Datasheet PDF | Manual PDF | AMD List of Compatibility PDF Links: Graphics Card Configurator | 2 | 88,80 € | Vaata | ||
 Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6700XT MERC 319 with Backplate The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility: - XFX Speedster MERC 319 AMD Radeon RX 6700 XT Black Gaming, 12G GDDR6 - XFX Speedster QICK 319 AMD Radeon RX 6700 XT BLACK - XFX Speedster QICK 319 AMD Radeon RX 6700 XT Core, 12G GDDR6 - XFX Speedster QICK 319 AMD Radeon RX 6700 XT Ultra, 12G GDDR6 Technical data cooler L x W x H 239,26 x 124 x 25 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 10 Technical data backplate L x W x H 239,26 x 99,32 x 6 mm Material aluminium Color black | 2 | 97,25 € | Vaata | ||
 Alphacool Eisblock Aurora RX 7900XTX Red Devil with Backplate Alphacool stellt die neuste Generation des Eisblock Aurora Wasserkühlers für Radeon RX 7XXX Grafikkarten vor. Der Wasserkühler wurde optimiert, um die enormen Abwärme-Eigenschaften dieser Grafikkartengeneration bestmöglich abzuführen. Die Finnenstruktur wurde angepasst und die Düsenplatte modifiziert, um einen besseren Wasserdurchfluss und eine optimale Verteilung des Wassers auf den Kühlfinnen zu ermöglichen. Technische Highlights Die Finnendicke dieser Eisblock-Kühlergeneration beträgt 0,4 mm, ebenso wie der Abstand der Kühlfinnen zueinander. Die Düsenplatte verfügt über ein überarbeitetes Inlay, das den Wasserdruck besser auf die Finnen verteilt und die Wärmeaufnahme optimiert. Der angepasste Wasserzufluss verhilft dem Wasser zu einem besseren Einströmwinkel. Verchromtes Kupfer Der Kühlerboden besteht vollständig aus verchromtem Kupfer, was unempfindlicher gegenüber Säuren, Kratzern und Schäden ist als eine Vernickelung. Verchromte Kühler wurden bisher nur im Industriesektor eingesetzt, um extreme Einflüsse auf die Kühler zu bewältigen. Zusätzlich sieht die Verchromung wesentlich homogener aus und bietet einen Glanz, der durch eine Vernickelung nicht erreicht werden kann. Design Das Aurora-Design der Radeon RX 7XXX Eisblock-Generation ist optisch ruhiger und schlichter. Der Kühler wird von einem einzigen O-Ring umschlossen. Die Konstruktion rund um die Kühlfinnen und der Jetplate sorgt für eine klarere Optik. Die Beleuchtung der digital adressierbaren RGB-LEDs wird dank der Verchromung noch besser im Kühler verteilt. Das Terminal entspricht in seiner Formgebung dem klassischen Aurora Design. Wärmeleitpaste & Wärmeleitpads Im Lieferumfang ist Alphacool's Subzero Wärmeleitpaste enthalten, die zu den leistungsstärksten Wärmeleitpasten auf dem Markt gehört. Zusätzlich werden Alphacool Soft Pads mit einer Dicke von 1 mm für die Spannungswandler und den Grafikspeicher verwendet. Die Pads für die Rückseite des PCB sind 3 mm dick. Die Wärmeleitfähigkeit der Pads liegt bei 7 W/mK bzw. 3 W/mK. Das elektrisch nicht leitende Thermal Grease ist besonders gut geeignet für hohe Anpressdrücke und lässt sich aufgrund der Viskosität von 850.000 TF trotzdem perfekt verarbeiten. Kompatibilität: - PowerColor Radeon RX 7900 XTX Red Devil, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC) - PowerColor Radeon RX 7900 XTX Red Devil Limited Edition, 24GB GDDR6, HDMI, 3x DP (RX 7900 XTX 24G-E/OC/LIMITED Technische Daten Kühler Abmessungen (L x B x H) 285,50 x 144,50 x 34,20mm Material Kühlerboden verchromtes Kupfer Material Kühleroberseite Acryl Anschlüsse 4 x G1/4" Dicke Kühlfinnen 0,4mm Abstand Kühlfinnen 0,4mm Beleuchtung digital aRGB LEDs Stromanschluss digital aRGB LEDs 3-Pin JST Spannung digital aRGB LEDs 5V Anzahl digital aRGB LEDs 15 Farbe transparent Technische Daten Backplate Abmessungen (L x B x H) 285,50 x 120,00 x 6mm Material Aluminium Farbe schwarz | 2 | 47,99 € | Vaata | ||
 Alphacool Eisblock Aurora Acryl GPX-N RTX 3070TI SG mit Backplate The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Compatibility: - KFA² GeForce RTX 3070 Ti SG (1-Click OC), 8GB GDDR6X, HDMI, 3x DP Technical data cooler L x W x H 214,59 x 123,23 x 24,35 mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Illumination digital aRGB LEDs Power connector digital aRGB LEDs 3-Pin JST Power digital aRGB LEDs 5V Number of digital aRGB LEDs 11 Technical data backplate L x W x H 214,59 x 98,83 x 6 mm Material aluminium Color black | 2 | 95,80 € | Vaata | ||
 Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Aorus Master/Xtreme with Backplate The Alphacool Aurora Acryl GPX-N RTX 3080/3090 Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-N RTX 3080/3090 graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-N RTX 3080/3090 cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-N RTX 3080/3090 Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-N RTX 3080/3090 Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-N RTX 3080/3090 also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-N RTX 3080/3090 Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x H: 146 x 269,5 x 25 mm Material cooler: Nickle-plated copper Material cooler top: Acryl Threads: 4 x G1/4“ Thickness cooling fins: 0,6 mm Illumination: Digital RGB LEDs Power connector Digital RGB LEDs: 3-Pin JST Power Digital RGB LEDs: 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : RTX 3080TI Gigabyte Aorus GeForce RTX 3080 Ti Xtreme 12GB (GV-N308TAORUS X-12GD) Gigabyte Aorus GeForce RTX 3080 Ti Master 12GB (GV-N308TAORUS M-12GD) RTX 3080 Gigabyte Aorus GeForce RTX 3080 Master 10G, 10GB GDDR6X, 3x HDMI, 3x DP (GV-N3080AORUS M-10GD) Gigabyte Aorus GeForce RTX 3080 Xtreme 10G, 10GB GDDR6X, 3x HDMI, 3x DP (GV-N3080AORUS X-10GD) RTX 3090 Gigabyte Aorus GeForce RTX 3090 Master 24G, 24GB GDDR6X, 3x HDMI, 3x DP (GV-N3090AORUS M-24GD) Gigabyte Aorus GeForce RTX 3090 Xtreme 24G, 24GB GDDR6X, 3x HDMI, 3x DP (GV-N3090AORUS X-24GD) Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Aorus Master Xtreme with Backplate Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Aorus Master Xtreme with Backplate | 2 | 84,95 € | Vaata | ||
 | |||||
 Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix with Backplate The Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix with Backplate combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical details L x W x H 152 x 267 x 25 mm Material cooler Nickle-plated copper Material cooler top POM clear Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Graphics Card Configurator: Click here! List of Compatibility: Nvidia graphic cards Compatibility : - ASUS ROG Strix GeForce RTX 3070 8GB Advanced (ROG-STRIX-RTX3070-A8G-GAMING) - ASUS ROG Strix GeForce RTX 3070 OC White, ROG-STRIX-RTX3070-O8G-WHITE (90YV0FR5-M0NA00) - ASUS ROG Strix GeForce RTX 3070 White Edition (ROG-STRIX-RTX3070-8G-WHITE) - ASUS ROG Strix RTX 3070 8G Gaming (ROG-STRIX-RTX3070-8G-GAMING) - ASUS ROG Strix RTX 3070 8G Gaming OC - ASUS ROG Strix RTX 3070 8GB TOP (ROG-STRIX-RTX3070-T8G-GAMING) - ASUS ROG Strix RTX 3070 8GB OC (ROG-STRIX-RTX3070-O8G-GAMING) Download Datasheet PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix with Backplate Datasheet Download Manual PDF: Alphacool Eisblock Aurora Acryl GPX-N RTX 3070 ROG Strix with Backplate Manual | 2 | 56,70 € | Vaata | ||
 Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800 Nitro+ with Backplate The Alphacool Aurora Acryl GPX-A RX 6800 Nitro+ Eisblock combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the EIsblock Aurora GPX-A RX 6800 Nitro+ graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora GPX-A RX 6800 Nitro+ cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Aurora GPX-A RX 6800 Nitro+ Eisblock cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Aurora GPX-A RX 6800 Nitro+ Eisblock, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora GPX-A RX 6800 Nitro+ also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Aurora GPX-A RX 6800 Nitro+ Acryl is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data: L x W x B: 143 x 260 x 24,5 mm Material cooler: Nickle plated copper Material top: Acetal Thickness cooling fins: 0,6 mm Threads: 4x G1/4“ Graphics Card Configurator: Click here! List of Compatibility: AMD graphic cards Compatibility list: - Sapphire Nitro+ Radeon RX 6800 OC 16G, 16384 MB GDDR6 More compatible models will follow in this list for this cooler. We are currently checking other PCB designs from various manufacturers! Download manual PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800 Nitro+ with Backplate Download data sheet PDF: Alphacool Eisblock Aurora Acryl GPX-A Radeon RX 6800 Nitro+ with Backplate | 2 | 85,10 € | Vaata | ||
 Zalman CPU Cooler CNPS9X PERFORMA Black Zalman CNPS9X PERFORMA BLACK. Tüüp: Õhujahuti, Ventilaatori läbimõõt: 12 cm, Õhuvool: 104,25 m³/h, Maksimaalne õhusurve: 1,43 mmH2O. Laius: 122 mm, Sügavus: 76 mm, Kõrgus: 157 mm. Toote värv: Must | 2 | 26,20 € | Vaata | ||
 | 2 | 109,90 € | Vaata | ||
 Noctua HC7 chromax.black CPU Cooler Cover - Black, Aluminum Kühler-Abdeckung von Noctua, für NH-U12A, aus pulverbeschichtetem Aluminium, inklusive austauschbarer Farbeinlagen | 2 | 24,36 € | Vaata | ||
 Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo with Backplate The Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo combines style with performance and extensive digital RGB lighting. With experience of over 16 years, Alphacool the ability to create GPU blocks that represent high quality and fantastic performance. This perfectly describes the Aurora Acryl GPX Eisblock More Performance! During the development of the Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo graphic card GPU block, we wanted to further increase the performance. The first step was to move the cooler closer to the individual components by reducing the thermal pads to a thickness of 1 mm. Next, we reduced the thickness of the nickel-plated copper block. Instead of 7 mm, it is now only 5.5 mm thick. The water flow inside the cooler has also been optimized. All important components such as the voltage transformers and the memory are now significantly better and more effectively cooled by the water. All this ensures a significant increase in cooling performance. New Design! The Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo cooler has been designed so that lighting is more important than the previous models. The addressable digital RGB LEDs are embedded directly into the cooling block and run along the entire cooling block. The effect is an illumination of the entire cooling block. No corner or edge remains unlit by the aRGB LEDs. The new design is more angular with all edges bevelled. This promotes better light diffusion in the water cooler due to the reflections on these bevels. In addition, they create various contours, which give the Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo cooler its very own unique identity. Copper or Aluminium? Of course, Alphacool only uses copper for its water coolers. With the Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo, the copper is nickel-plated. Compared to its predecessor models, Alphacool has improved the nickel plating even further, which has considerably increased the acid resistance. This means that the nickel should resist flaking. Why does Alphacool rely on copper instead of aluminium? Simply, copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Is There Anything Else New? The Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo also relies on the new patented stop fittings, which sit flush with the surface of the terminal. The Alphacool logo now sits in the corner on the top and is also fully illuminated. On the front of the terminal you can see the corresponding names of the compatible graphic card types. Of course, these are also fully illuminated by the digital LEDs. IN and OUT are now marked by small triangles. They are easily recognizable and fit perfectly into the entire aesthetics of the graphic card water cooler. The Alphacool Eisblock Aurora Acryl GPX-N RTX 3080/3090 Turbo is a complete redevelopment of the previous Alphacool graphics card water coolers. No technical compromises were made, but the entire technical know-how flowed into the development and implementation. Technical data cooler L x W x H 266,65 x 122,4 x 24,35 mm Material cooler Nickle-plated copper Material cooler top Acrylic Threads 4 x G1/4“ Thickness cooling fins 0,6 mm Illumination Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technical data backplate L x W x H 266,65 x 97,6 x 6 mm Material Aluminium Color Black Compatibility list: - ASUS Turbo GeForce RTX 3080 10GB (TURBO-RTX3080-10G) - ASUS Turbo GeForce RTX 3080 V2 10GB (TURBO-RTX3080-10G-V2) - ASUS Turbo GeForce RTX 3090 (90YV0FK0-M0NB00) Downloads: Datasheet PDF | Manual PDF | Nvidia List of Compatibility PDF Links: Graphics Card Configurator | 2 | 74,40 € | Vaata | ||
 Alphacool NexXxoS ST25 Radiaatoriplokk (14352) Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products. Make No Compromises, Use Copper. As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system. Full Cooling Capacity To maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. Compact The ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data: LxWxH: 151 x 120 x 25,5 mm Material: copper Material outer housing: steel Fins per Inch: 15 Threads: 2 x G1/4“ Thread size fan mounting: M3 Fan size: 120 mm Fan slots: 1 single sided / 2 double sided Download data sheet PDF: Alphacool NexXxoS ST25 Full Copper 120 mm radiator | Laos | 2 | 38,90 € | Vaata | |
 Alphacool Eisblock Aurora Acryl GPX-N RTX 3090 TI FTW3 Ultra with Backplate The Alphacool Eisblock Aurora Acrylic GPX graphics card water cooler with backplate combines style with performance. Extreme cooling performance and an extensive digital RGB lighting characterize it. Experience and technical know-how from more than a decade have gone into the development, without making any technical compromises. The Eisblock Aurora Acryl GPX is a significant evolution of the previous Alphacool graphics card water cooler, which has been improved in every area. More performance! During the development of the Eisblock Aurora Acryl GPX graphics card water cooler, emphasis was naturally placed on increasing performance. First, the cooler was brought closer to the individual components by reducing the thickness of the heat conducting pads. Next, the nickel-plated copper block was also made thinner. Step 3 involves the constant optimisation of the water flow within the cooler. The result: All important components such as voltage converters and RAM are cooled much better and more effectively by the water and the cooling performance increases significantly. Brilliant design! The addressable digital aRGB LEDs are embedded directly in the cooling block and run along the sides of the entire cooler. The effect is an illumination that engulfs the entire cooling block. No corner or edge is left unlit by the aRGB LEDs. The new design is more angular, with all edges bevelled. The result is better light diffusion in the water cooler due to the reflections on these bevels. They also create various contours that give the Eisblock Aurora Acryl GPX cooler its very own visual touch. Copper or aluminium? Alphacool only uses copper in its water coolers. In the case of the Eisblock Aurora Acryl GPX, the copper is nickel-plated. Compared to the previous models, however, Alphacool has once again improved the type of nickel plating, which has significantly increased the acid resistance. This should prevent the nickel plating from flaking off. Why does Alphacool use copper instead of aluminium? Copper has almost twice the thermal conductivity of aluminium and is therefore clearly the better material for water cooling. Other special features The Eisblock Aurora Acryl GPX GPU cooler has the patented screw plugs, which sit flush with the surface of the terminal. The Alphacool logo sits in the corner on the top and is also fully illuminated. On the front of the terminal, corresponding designations of the compatible graphics card manufacturers can be seen. Of course, these are also fully illuminated by the adressable digital LEDs. IN and OUT are marked by small discreet triangles. They are easily recognisable and fit perfectly into the overall visual line of the graphics card water cooler. Technical data cooler L x W x H 290 x 151 x 24mm Material cooler Nickle-plated copper Material cooler top acrylic Threads 4 x G1/4 Thickness cooling fins 0,6 mm Maximum working temperature 60 °C Illumination 11x Digital RGB LEDs Power connector Digital RGB LEDs 3-Pin JST Power Digital RGB LEDs 5V Technical data backplate L x W x H 290 x 125 x 6mm Material aluminium Color black Compatibility: EVGA GeForce RTX 3090 Ti FTW3 Ultra Hydro Copper Gaming (24G-P5-4989-KR) EVGA GeForce RTX 3090 Ti FTW3 Ultra Hybrid Gaming (24G-P5-4988-KR) EVGA GeForce RTX 3090 Ti FTW3 Ultra Gaming (24G-P5-4985-KR) EVGA GeForce RTX 3090 Ti FTW3 Gaming (24G-P5-4983-KR) EVGA GeForce RTX 3090 Ti FTW3 Black Gaming (24G-P5-4981-KR) | 2 | 92,10 € | Vaata | ||
 Alphacool NexXxoS ST25 Full Copper 240mm Radiator (14353) Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products.Make No Compromises, Use Copper. As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system.Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise.CompactThe ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data:LxWxH: 272 x 120 x 25,5 mmMaterial: copperMaterial outer housing: steelFins per Inch: 15Threads: 2 x G1/4“Thread size fan mounting: M3Fan size: 120 mmFan slots: 2 single sided / 4 double sided Download data sheet PDF: Alphacool NexXxoS ST25 Full Copper 120 mm radiator | 2 | 56,95 € | Vaata | ||
 Alphacool NexXxoS ST25 Full Copper 360mm Radiator (14354) Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products.Make No Compromises, Use Copper. As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system.Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise.CompactThe ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data:LxWxH: 393 x 120 x 25,5 mmMaterial: copperMaterial outer housing: steelFins per Inch: 15Threads: 2 x G1/4“Thread size fan mounting: M3Fan size: 120 mmFan slots: 3 single sided / 6 double sided Download data sheet PDF: Alphacool NexXxoS ST25 Full Copper 360 mm radiator | Laos | 2 | 65,90 € | Vaata | |
 Alphacool NexXxoS ST25 Full Copper 92mm Radiator (14355) Alphacool is an internationally renowned company in the field of water cooling solutions for both industrial and home users. To ensure that customers receive the best products available, Alphacool is constantly developing new products and making improvements to existing products. Make No Compromises, Use Copper.As usual, Alphacool uses pure copper for the NexXxoS ST25 slim radiators. The end chambers, the water channels and the cooling fins are all made of copper, a unique selling point worldwide. No other manufacturer relies on pure copper for all these components combined. As a result, Alphacool has been producing one of the most popular and highest performing radiators on the market for many years, providing the perfect foundation for every water cooling system. Full Cooling CapacityTo maximize the performance of a radiator, Alphacool reaches deep into its bag of tricks. Copper is the starting point. With a thermal conductivity of 400 W/(mK) for copper compared to 236 W/(mK) for aluminium, the winner is clear. Alongside this is the special fin density. Alphacool is one of the oldest companies in the field of water cooling and has carried out countless laboratory tests. The result is a fin spacing of 15 FPI. This means that the air flow is only slightly obstructed as the air can pass through even without high pressure. However, the cooling capacity does not suffer from this, on the contrary. To use the airflow optimally, all cooling fins have small serrations. These are tiny flaps that guide the airflow in the desired direction and increase the surface area. In the case of radiators, they are barely 1 mm high, but still provide controlled air turbulence to increase cooling capacity and minimise airflow noise. CompactThe ST25 slim radiators offer the ideal liquid cooling solution for Mini-PCs or SSF (Small Form Factor) systems. Due to the extremely flat design, the NexXxoS ST25 radiators are ideal for such small cases and due to the reduced size, they give you the extra space you need to work in the case. Technical data:L x W x H: 132 x 92 x 25 mmFPI: 15 Material cooling fins: Copper Material chambers: Copper Material cooling channels: Copper Material threads: Brass Material outer housing: stainless steel G 1/4“ threads: 2 x For fan size: 92 mm Possible fan assembly: 1 x one-sided / 2 x both-sidedDownload data sheet PDF: Alphacool NexXxoS ST25 Full Copper 92mm Radiator | Laos | 2 | 47,70 € | Vaata | |
 Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Hexa (6x40mm) Radiator (14292) It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 420 W at an ambient temperature of 30°C and fans with 12.000 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 286 x 40,5 x 60mm Net weight: 644g Maximum working temperature: 60°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 8x M3 threads Fan size: 40mm Fan slots: 6 single-sided / 12 double-sided Fan threads: M3 Pressure-tested: 0,8 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Hexa Radiator Mounting material Datasheet Manual | 2 | 108,90 € | Vaata | ||
 Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Hepta (7x40mm) Radiator (14293) It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 490 W at an ambient temperature of 30°C and fans with 12.000 rpm. X-Flow – Find the easy route For the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 326,5 x 40,5 x 60mm Net weight: 657g Maximum working temperature: 60°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 12x M3 threads Fan size: 40mm Fan slots: 7 single-sided / 14 double-sided Fan threads: M3 Pressure-tested: 0,8 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Hepta Radiator Mounting material Datasheet Manual | 2 | 119,30 € | Vaata | ||
 Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Dual Radiator (14295) It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 440 W at an ambient temperature of 30°C and fans with 6500 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 203,5 x 80 x 60mm Net weight: 674g Maximum working temperature: 180°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 4x M3 threads Fan size: 80mm Fan slots: 2 single-sided / 4 double-sided Fan threads: M3 Pressure-tested: 1,5 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Dual Radiator Mounting material Datasheet Manual | 2 | 93,30 € | Vaata | ||
 Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Triple Radiator (14296) It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 660 W at an ambient temperature of 30°C and fans with 6500 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 284 x 80 x 60mm Net weight: 900g Maximum working temperature: 180°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 8x M3 threads Fan size: 80mm Fan slots: 3 single-sided / 6 double-sided Fan threads: M3 Pressure-tested: 1,5 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Triple Radiator Mounting material Datasheet Manual | 2 | 117,20 € | Vaata | ||
 Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Quad Radiator (14297) It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 880 W at an ambient temperature of 30°C and fans with 6500 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 364,5 x 80 x 60mm Net weight: 1049g Maximum working temperature: 180°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 12x M3 threads Fan size: 80mm Fan slots: 4 single-sided / 8 double-sided Fan threads: M3 Pressure-tested: 1,5 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Triple Radiator Mounting material Datasheet Manual | 2 | 124,40 € | Vaata | ||
 Alphacool Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Penta (5x40mm) Radiator (14291) It's the best system because it's your system, strive for perfection! The new Alphacool NexXxoS UT60 X-Flow Server Radiators help you to get one step closer! Increase the performance of your system with the new Alphacool NexXxoS UT60 X-Flow Server Radiators. This Radiator can discharge up to 350 W at an ambient temperature of 30°C and fans with 12.000 rpm. X-Flow – Find the easy routeFor the best possible cooling of your system, Alphacool relies on the X-Flow for the new NexXxoS server radiators. The flow runs from one side of the radiator to the other and directly uses all fins. Your Alphacool NexXxoS UT60 X-Flow immediately achieves the best possible cooling with optimized water circulation. Countersunk screw plugs - anything but ordinaryFor the first time Alphacool has countersunk the screw plugs. This unique design allows you to stay flexible with the positioning of your Alphacool NexXxoS UT60 X-Flow Radiator. Mount your radiator the way you need it. Thanks to the multiple inlets and outlets, you have more options to create something unique and more importantly efficient. Solid copper - the best performance at the highest levelThe radiator of the new Alphacool NexXxoS series is also made of solid copper ensuring the radiators offer you the highest thermal conductivity for the best performance. Rely on the No. 1 in materials. Different sizes - same qualityThe new Alphacool NexXxoS UT60 X-Flow is available in different sizes and thicknesses. All radiators of this series are compatible with 2U server racks. Thanks to the special shape, installation is child's play, even with the larger radiators. Decide for yourself which size is perfect for your system and always choose the best quality. Technical Details Dimensions (LxWxH): 245,5 x 40,5 x 60mm Net weight: 577g Maximum working temperature: 80°C Material (fins/channels/pre-chamber): Copper Material external housing: Steel Threads: 6x G1/4" Mounting option radiator: 8x M3 threads Fan size: 40mm Fan slots: 5 single-sided / 10 double-sided Fan threads: M3 Pressure-tested: 0,8 bar Certificates: CE, FC, ROHS Scope of Delivery 1x Alphacool NexXxoS UT60 Full Copper X-Flow 40mm Penta Radiator Mounting material Datasheet Manual | 2 | 98,50 € | Vaata | ||
 Deepcool Õhkjahuti AG400 DIGITAL PLUS Powerful CPU cooler with dual tower, 4 heatpipes, 2x PWM fans, A-RGB lighting | 2 | 66,99 € | Vaata | ||
 Alphacool NexXxoS UT60 Full Copper X-Flow 80mm Single Radiator (14294) Alphacool is an internationally renowned company in the field of watercooling solutions for both industrial and end customer. Constantly innovating and improving both server and home solutions, Alphacool strives to create the perfect solution.Perfect for workstations and serversThe 80 mm NexXxoS radiators are specially designed for server racks and workstations. Due to their low height of only 80 mm and the special M3 mounting holes on the top and bottom, they’re perfect for 1U server racks. Alternatively, the radiators can also be mounted in the classic way using the mounting locations of the fans. M3 screws are also required here.No compromise on materialsAlphacool always uses copper in its NexXxoS radiators. Alphacool is the only manufacturer that uses pure copper for all water-bearing components. Starting with the end chambers, the water channels and the cooling fins, everything is made of pure copper. Only the connecting threads are made of brass, as pure copper would be too soft for the threads and would give way over time.Outstanding cooling capacityThere are several approaches that Alphacool uses to increase the cooling capacity. Using copper ensures the best properties to dissipate the heat. Aluminium, which is often used in low-cost products, is not as good as copper in terms of heat capacity and thermal conductivity.Compared to some other manufacturers, the copper fins are only thinly painted. This means that the cooling performance isn’t affected at all unlike a thick coating of paint which would act as a insulator. The fin spacing is 10 FPI for optimal performance. This means that the fins are close enough together to create a large surface, but also far enough apart not to obstruct the air flow. In addition, all fins are designed to provide controlled air turbulence. This means that the air flowing through the fins is more efficient and is directed exactly where it is needed.X-Flow instead of U-FlowThe water flow in classic PC radiators is U-shaped. This means that the water inlet and outlet are on the same side on the radiator. This has certain advantages in the normal PC, however, it is difficult to set up a reasonable cooling loop like this in an extremely flat server. Due to the X-Flow technology, the input and output are located on the opposite sides. This makes it very easy to create a loop in the server rack. For example, you could go out from one side, directly into a CPU, then into one or more graphics cards and the pump, then back to the radiator on the other side.Versatile connection optionsEach NexXxoS 80 mm X-Flow radiator has 3 ports on each end of the radiator. This means that almost any conceivable mounting position can be achieved. The connections are located on each side in the opposite position and then one at the head ends of the radiators.Alphacool has developed special patented stop plugs that are flush with the radiator to avoid them fouling the case. Previous solutions always exceeded the length or width of the radiator because they were not countersunk.If you are interested in a professional implementation of water cooling for your servers or workstations in your data centre, Alphacool also offers complete solutions with special reservoirs, pumps and coolers. These include highly optimized water coolers for workstation graphics cards and CPUs. To find out more about this, send us your request to: info@alphacool.com Technical dataL x W x H123 x 60 x 80 mm (+/- 3% tolerance in the range of the prechamber)Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads6x G1/4" IN/OUT (max. 5mm thread length)Possible fan size80mmPossible fan assembly1x one-sided / 2x both-sidedThread size fan mountingM3Pressure tested0,8 BarMaximum working temperature60°CFin density10 FPIWeight523gColorblackWarranty: 10 years???? Warranty Terms | 2 | 59,25 € | Vaata | ||
 Asus ROG Ryujin II 240 processor liquid cooling system The flagship ROG Ryujin II all-in-one cooler delivers ultimate thermal performance for gamers looking for the absolute best. With a 7th Generation Asetek pump, Noctua Industrial PPC radiator fans, and an embedded fan for the CPU socket area, it harnesses both water and air to provide incredible cooling capabilities. And with an LCD panel that displays system stats and customizable graphics, ROG Ryujin II become the heart of your system. | 2 | 208,50 € | Vaata | ||
 Alphacool Core Ocean T38 AIO 420mm All-in-One-Wasserkühlung, 420-mm-Radiator, 3x 140-mm-PWM-Lüfter, integrierte RGB-Beleuchtung | 2 | 74,55 € | Vaata | ||
 NZXT water cooling Kraken Elite 360 RGB Get high-performance cooling, display a favorite animated GIF or static image, monitor real-time PC performance metrics, see music that's currently playing, stream browser content and more with NZXT CAM software.2.36 diameter wide-angle LCD display with 640x640 resolution and 60 Hz refresh rate provides a sharp image from any viewing angle Screen supports the display of custom images, animated GIFs, and CAM system info with adjustable orientation Powerful Asetek pump provides optimal cooling and up to 2,800 RPM whisper-quiet operation Includes F140/F120 RGB Core fans Includes RGB Controller, RGB Fans, & USB Y-Cable Single breakout cable simplifies installation Rubber tubing is reinforced with nylon-braided sleeves to prevent leaks Control custom screen content, RGB, pump speed, and zero-noise fan curves with NZXT CAM software. | 1-3 tp | 2 | 120,73 € +0,23 € | Vaata | |
 Alphacool Eisbaer Pro ES 80mm Quad HPE + 4x ES PWM fans (AMD... The Eisbaer Pro ES 2U 80mm Quad HPE AIO water cooling solution features an extremely powerful NexXxos 80mm Quad full copper radiator, equipped with high-throughput 80mm ES fans. All components used come from the Enterprise Solutions water cooling segment. Alphacool's Eisbaer Pro ES 2U 80mm Quad HPE AIO is a professional all-in-one water cooling solution that is easy to install and offers the performance of a pre-assembled and pre-filled custom loop.Powerful Full Copper RadiatorThe 80mm NexXxoS radiators are specifically designed for server racks and workstations. The copper cooling fins are extremely thinly coated compared to most other manufacturers. This ensures that the cooling performance is not reduced, as a thick coating acts as insulation. The fin spacing is also optimally chosen with 10 FPI. The fins are close enough together to provide enough cooling surface area, but far enough apart to not hinder the airflow. Additionally, all cooling fins are equipped with flaps to provide controlled air turbulence, allowing the flowing air to better absorb and transport heat away from the fins.Optimal CoolingThe cooler base covers the entire surface area of the respective processors. The surface area with cooling fins is larger that of all known processor DIEs, with a size of around 55 x 42mm. This ensures that all hotspots of a CPU are optimally cooled. The cooling fins are 0.4mm thick and also have an optimal spacing of 0.4mm from each other. There are a total of 58 cooling fins on the cooler base. The cooler base is only 3mm thick, allowing the heat to quickly reach the water and be removed.Reliable PumpThe Eisbaer Pro ES cooler uses the very compact and small DC-LT 2 pump. It provides enough power to include additional components such as GPU water blocks or radiators in the water loop.High-Quality TPV TubesThe hose connections come from the normal DIY segment and use a G1/4" thread. Therefore, they can be easily replaced. The TPV hose is free of plasticizers and does not deform, unlike traditional PVC hoses, even at high temperatures.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677.Attention: This set is not compatible with servers in the 1U and 2U form factor. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 3647 / LGA 4189 / LGA 4677 (optional) Technical data cooler with pumpDimensions (L x W x H)64 x 79 x 54,3mmTube length75cmMaterial cooler bottomnickel plated copperMaterial cooler topAcrylThreads2x G1/4“ (+ 1x Fillport G1/4“)Pump typeDC-LT2Pump speed2600 rpm (+/- 10%)Head of delivery1mMaximum flow72 L/hVoltage6-13,5V DCPower consumption3,2WPressure tested0,8 BarMaximum working temperature60°CColorblackTechnical data radiatorDimensions (L x W x H)364,5 x 80 x 60mmMaterial cooling fins, prechambers & cooling channelsCopperPressure tested1,5 BarConnectorG1/4"ColorblackTechnical data fanDimensions (L x W x H)80 x 80 x 25mmAir flow130,93 m³/hRated speed range800 - 6000 rpmRPM signal transmissionYesColorblackTechnical data tubeMaterialTPV (EPDM/PP)Tube size12,7/7,6mmHardness grade35 Shore-A to 50 Shore-DMaximum working temperature-50 to +155°CColorblack | 2 | 200,80 € | Vaata | ||
 Alphacool Eisbaer Pro ES 80mm Triple HPE + 3x ES PWM fans (AMD... The Eisbaer Pro ES 2U 80mm Triple HPE AIO water cooling solution features an extremely powerful NexXxos 80mm Triple full copper radiator, equipped with high-throughput 80mm ES fans. All components used come from the Enterprise Solutions water cooling segment. Alphacool's Eisbaer Pro ES 2U 80mm Triple HPE AIO is a professional all-in-one water cooling solution that is easy to install and offers the performance of a pre-assembled and pre-filled custom loop.Powerful Full Copper RadiatorThe 80mm NexXxoS radiators are specifically designed for server racks and workstations. The copper cooling fins are extremely thinly coated compared to most other manufacturers. This ensures that the cooling performance is not reduced, as a thick coating acts as insulation. The fin spacing is also optimally chosen with 10 FPI. The fins are close enough together to provide enough cooling surface area, but far enough apart to not hinder the airflow. Additionally, all cooling fins are equipped with flaps to provide controlled air turbulence, allowing the flowing air to better absorb and transport heat away from the fins.Optimal CoolingThe cooler base covers the entire surface area of the respective processors. The surface area with cooling fins is larger that of all known processor DIEs, with a size of around 55 x 42mm. This ensures that all hotspots of a CPU are optimally cooled. The cooling fins are 0.4mm thick and also have an optimal spacing of 0.4mm from each other. There are a total of 58 cooling fins on the cooler base. The cooler base is only 3mm thick, allowing the heat to quickly reach the water and be removed.Reliable PumpThe Eisbaer Pro ES cooler uses the very compact and small DC-LT 2 pump. It provides enough power to include additional components such as GPU water blocks or radiators in the water loop.High-Quality TPV TubesThe hose connections come from the normal DIY segment and use a G1/4" thread. Therefore, they can be easily replaced. The TPV hose is free of plasticizers and does not deform, unlike traditional PVC hoses, even at high temperatures.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677.Attention: This set is not compatible with servers in the 1U and 2U form factor. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sTR5 / sWRX8 / TR4Intel: LGA 1700 / LGA 2011 / LGA 2011-3 / LGA 3647 / LGA 4189 / LGA 4677 (optional) Technical data cooler with pumpDimensions (L x W x H)64 x 79 x 54,3mmTube length75cmMaterial cooler bottomnickel plated copperMaterial cooler topAcrylThreads2x G1/4“ (+ 1x Fillport G1/4“)Pump typeDC-LT2Pump speed2600 rpm (+/- 10%)Head of delivery1mMaximum flow72 L/hVoltage6-13,5V DCPower consumption3,2WPressure tested0,8 BarMaximum working temperature60°CColorblackTechnical data radiatorDimensions (L x W x H)284 x 80 x 60mmMaterial cooling fins, prechambers & cooling channelsCopperPressure tested1,5 BarConnectorG1/4"ColorblackTechnical data fanDimensions (L x W x H)80 x 80 x 25mmAir flow130,93 m³/hRated speed range800 - 6000 rpmRPM signal transmissionYesColorblackTechnical data tubeMaterialTPV (EPDM/PP)Tube size12,7/7,6mmHardness grade35 Shore-A to 50 Shore-DMaximum working temperature-50 to +155°CColorblack | 2 | 162,90 € | Vaata | ||
 MSI MPG CORELIQUID D240 Cooler Tootekood: 936-6A1611-003 Jahutid ja lisad The MPG series brings out fashionable products by showing extremely unique styles and expressing a conceited attitude towards the challenge of the gaming world. With extraordinary performance and style, the MPG series defines the future of gaming fashion. | 2 | 236,00 € | Vaata | ||
 | 2 | 14,99 € | Vaata | ||
2 | 23,76 € | Vaata | |||
 | 2 | 48,41 € | Vaata | ||
 Fractal Design Case Fan Prisma AL-12 PWM ARGB 120mm White FD-FAN-PRI-AL12-PWM-WT Fractal Design Prisma Al-12 | 2 | 27,09 € | Vaata | ||
 EKWB EK-Quantum Torque Micro HDC 12 Satin Titanium Extra kleines Fitting für 12-mm-Hardtubes, mit einer Höhe von nur 11,5 mm | 2 | 8,60 € | Vaata | ||
 Lian Li Case Fan Uni Fan TL LCD 120 RGB Reverse Blade 3-pack + Hub 120 mm Lian Li Uni TL LCD Series Reverse Blade 3-Pack LULI-073 | 2 | 148,90 € | Vaata | ||
 | Laos | 2 | 27,90 € | Vaata | |
 | Laos | 2 | 44,90 € | Vaata | |
 Geometric Future Case Fan Squama 2503W RGB 120mm White 3 Pack Geometric Future Squama 2503W RGB 3-Pack (GEO-S2503W-3) | Laos | 2 | 29,90 € | Vaata | |
2 | 28,79 € +0,01 € | Vaata | |||
2 | 18,79 € | Vaata | |||
 | 2 | 19,00 € | Vaata | ||
 | 2 | 59,90 € +3,30 € | Vaata | ||
 Thermaltake Riing Plus 14 RGB TT Premiun 3pack GTIN: 841163067680 Jahutid ja lisad | 2 | 111,78 € | Vaata | ||
 | 2 | 84,00 € | Vaata | ||
2 | 43,85 € | Vaata | |||
2 | 5,11 € | Vaata | |||
Jahutid ja lisad
5 000 toodet
2 | 108,60 € | Vaata | ||
2 | 74,05 € | Vaata | ||
2 | 32,89 € | Vaata | ||
2 | 88,80 € | Vaata | ||
2 | 97,25 € | Vaata | ||
2 | 47,99 € | Vaata | ||
2 | 95,80 € | Vaata | ||
2 | 84,95 € | Vaata | ||
| | ||||
2 | 56,70 € | Vaata | ||
2 | 85,10 € | Vaata | ||
2 | 26,20 € | Vaata | ||
2 | 109,90 € | Vaata | ||
2 | 24,36 € | Vaata | ||
2 | 74,40 € | Vaata | ||
2 | 38,90 € | Vaata | ||
2 | 92,10 € | Vaata | ||
2 | 56,95 € | Vaata | ||
2 | 65,90 € | Vaata | ||
2 | 47,70 € | Vaata | ||
2 | 108,90 € | Vaata | ||
2 | 119,30 € | Vaata | ||
2 | 93,30 € | Vaata | ||
2 | 117,20 € | Vaata | ||
2 | 124,40 € | Vaata | ||
2 | 98,50 € | Vaata | ||
2 | 66,99 € | Vaata | ||
2 | 59,25 € | Vaata | ||
2 | 208,50 € | Vaata | ||
| | 2 | 74,55 € | Vaata | |
| | 2 | 120,73 € +0,23 € | Vaata | |
2 | 200,80 € | Vaata | ||
2 | 162,90 € | Vaata | ||
| | 2 | 236,00 € | Vaata | |
2 | 14,99 € | Vaata | ||
2 | 23,76 € | Vaata | ||
2 | 48,41 € | Vaata | ||
2 | 27,09 € | Vaata | ||
2 | 8,60 € | Vaata | ||
2 | 148,90 € | Vaata | ||
2 | 27,90 € | Vaata | ||
2 | 44,90 € | Vaata | ||
2 | 29,90 € | Vaata | ||
2 | 28,79 € +0,01 € | Vaata | ||
2 | 18,79 € | Vaata | ||
| | 2 | 19,00 € | Vaata | |
2 | 59,90 € +3,30 € | Vaata | ||
| Thermaltake Riing Plus 14 RGB TT Premiun 3pack GTIN: 841163067680 Jahutid ja lisad | 2 | 111,78 € | Vaata | |
2 | 84,00 € | Vaata | ||
2 | 43,85 € | Vaata | ||
2 | 5,11 € | Vaata | ||
