- True Hi-Flow Design.- Hi-Quality Brass Material.- High Durability Nickel Finished In Black Sparkle Color.- Hiding O-Ring Design.- Design For Tube ID 8MM OD 11MM Application.- RoHS Compliant.Toote värvMustMaterjalMessing
- Compatible With Bitspower Fitting With G1/4" Thread.- Thick O-Ring.- Best Choice For O-Ring Periodicity Replacement.- RoHS Compliant.Toote värvMustMaterjalKumm
DetailsEK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0,5mm x 45° chamfer.Technical data:- Material: PETG- Inner diameter: 10 mm- Outer diameter: 12 mm- Length: 500 mm (19.5")The package contains 2 pieces of tube only. Please purchase EK-HD Adapter or EK-HDC compression fittings separately!Toote värvLäbipaistevLaius500 mm
Thermaltake introduces the Pacific Series adapter fittings for the ultimate custom PC water cooling. Made of black copper, the adapter fittings are 360-degree rotatable and consist of two sealed O-rings with the Tt logo printed on the side, allowing the user to redirect the fittings for easier pipe routing at a 90-degree angle. Choose from: 45, 90, 45 & 45, 45 & 90 degrees and 4-way connection. Thermaltake fittings provide a complete solution for do-it-yourself and PC manufacturers by providing the user with ideal mounting, fitting and flow.
EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only!It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0,5mm x 45° chamfer.Technical data:- Material: PETG- Inner diameter: 12 mm- Outer diameter: 16 mm- Length: 500 mm (19.5")The package contains 2 pieces of tube only. Please purchase EK-HD Adapter or EK-HDC compression fittings separately!Toote värvLäbipaistevLaius500 mm
EK ZMT (Zero Maintainance Tubing) is a high quality, zero maintainance industrial grade EPDM rubber tubing in stylish matte black.This tubing is - just like Norprene - designed to withstand harsh conditions for a very long period of time, offering a truly exceptional lifespan even under UV, ozone and heat exposure for many years.Unlike most PVC and PUR tubing this high quality EK made EPDM rubber tubing ensures long lasting operation and does not suffer from plasticizer leaching effect which can cause blockage (gunking) in your liquid cooling loop. This 9,5/15,9mm (ID/OD) tubing also allow for very small bend radius!This may not be the tubing for everyone but it is guaranteed to be hassle-free even in the long run which is something other PVC/PUR tubing cannot offer!This tubing is a perfect companion for EK-CSQ Fitting 10/16 series compression fttings.- Material: EPDM.- Colour: Black, not UV-reactive.- Outer diameter: 15,9mm (5/8").- Inner diameter: 9,5mm (3/8").- Operating temperature range: -30°C to 110°C.- Compatible with all known widely used coolants.Toote värvMust
Supermicro SNK-P0036A4 processor heatsink for Socket 1366.SobilikProtsessorTüüpRadiaatorToetatud protsessoripesadLGA 1366 (Socket B)Müratase (suur kiirus)45 dBÜhilduvusXeon 3500 / 5500, Core i7Mõõdud (l x s x k)90 x 90 x 68 mmPöörlemiskiirus4200 RPM
TwinBlade™ Server Front HeatsinkSobilikProtsessorTüüpRadiaatorToetatud protsessoripesadLGA 1366 (Socket B)ÜhilduvusXeon Processor 5500 and 5600 SeriesToote värvMustMõõdud (l x s x k)72 x 99 x 27 mm
Dimensions: 140 x 140 x 25.4 mm (W x H x D) Weight: approx. 159.3 g Material: Plastic Connection: 4-Pin (PWM) Speed: 200~1,000 RPM Volume: max. 19.5 dB (A) Delivery Volume: max. 71.3 m³/h Static Pressure: max. 1.06 mm H2O Voltage: 12 V Bundle: 1x QF140 Fan 1x Molex Adapter 4x Standard Fan Screws 4x Rubber Decoupler
The new premium fan series is based on the NB-Blacksilent-Chassis and is equipped with the excellent electronics module NB-EKA Plus and NB-NanoSLI bearings. Both are features that were so far used only in the more complex Multiframe series. Besides the technologically advanced components this fan is also equipped with an individually adaptive cable management. The fan is shipped with a newly developed mounting kit for vibration-free mounting which consists of an optimized "NB-Silentframe" silicone frame with suitable counter-pieces and knurled nuts for tool-free installation. Technical specifications: Dimensions: 120x120x25mm Colour: Black Weight: 120g Nominal voltage: 12V Starting voltage: 4,5V Current draw: 0,06A Nominal speed: 900rpm (+/-10%) Airflow: 68m³/h / 40,025CFM Noise emission: 11 dB(A) MTBF (25°C): 180000hrs Connector: 3-Pin Molex plug with rpm lead Extent of delivery: 1x Noiseblocker NB-BlackSilentPRO PL1 ( 120x120x25mm ) 1x Fan decoupling 1x 3 PIN fan extension 20cm 1x 3 PIN fan extension 50cm 4x Mounting screws 4x Knurled nuts Tech-Review has tested this product for you!
EK Water Blocks Thermal Pad E 1.0mmToote kirjeldus inglise keeles:Thermal Pads are a real alternative to traditional thermal grease for many applications. The Thermal Pads offer some advantages over liquid or viscous materials. This makes it easy to cut the pads themselves to the required size, eliminating the uncertainty of applying paste or smearing during smoothing. The EK Water Blocks pad offered here is already pre-cut into eight smaller pieces, slightly self-adhesive, and usually initially holds itself in the previously assigned position.Of course, the fixation in the further course of assembly can not be completely dispensed with, since heat source, thermal pad and heatsink (or the heat delivery surface) should come into contact with as large a surface area as possible in order to ensure optimum heat transfer. Here, too, EKWB comes in handy with the user, as the 100 x 16 mm blue pad is available in several thicknesses, with the version offered here being 1.0 mm thick. In addition, the material is pleasantly flexible and adaptable, which makes it useful in many places.To mention just a few application examples: in RAM water coolers, alternative graphics card coolers, chipset coolers and many other components, where it is important to effectively dissipate waste heat (eg on cooling fins, heatpipes, radiators, heatsinks, etc.). Since the EKWB heat-conducting pads do not conduct electricity, there are virtually no limits to the imagination of most electronic components. On the other hand, the pads with a high thermal conductivity of 3.5 W / (m · K) make some thermal grease look old. The pads here are ideally suited for the chip sets of a memory module, since the strip, which measures 100 x 16 mm in total, has already been cut into eight smaller pieces of 12.5 x 16 mm each. Note:The application is at your own risk! Caseking assumes no liability for damage caused by improper use or use in unsuitable fields of application. A sufficiently high heat transfer should be carefully checked after installation! Technical details:Dimensions (total): 100 × 16 mm (L x W)Dimensions: (single): 12.5 x 16 mm (L x W)Thickness: 1.0 mmNumber: 1 strip (pre-cut into eight smaller pieces)Thermal conductivity: 3.5 W / (m · K)Operating temperature: -55 to +200 ° C
The reservoirs aquainlet PRO and aquainlet XT are designed to be directly mounted onto an aquastream XT or Eheim 1046 pump. The design is perfectly matched to the pump, after installation pump and reservoir form a virtually seamless unit. In particular, the mounting rails of the pump are extended into the reservoir, which for the first time allows for the mounting plate to be installed beneath the center of gravity. This is especially helpful when using rubber decouplers or a shoggy sandwich. When installed onto the suction port of the pump, an o-ring seals the connection between pump and reservoir and two latches secure the reservoir to the pump housing, preventing accidental release of the bayonet coupling between pump cover and pump housing. Two connection threads for the return line located at the front and the side of the unit allow for flexible installation options and are paticularly useful if the reservoir is to be installed with limited space.The reservoirs aquainlet PRO and aquainlet XT are closely related to the aqualis series and are also equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremele hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 50 mm and a wall thickness of 5 mm. Base and top of the aquainlet reservoirs are made from Delrin and connected by a stainless steel rod. The aquainlet XT variants feature an acrylic window in the base part and one LED (5 mm size) can be installed into the base part. Additionally, the XT variants feature an electronic fill level sensor with USB and aquabus interface, a programmable alarm output and an external temperature sensor input. For monitoring and configuration, the aquasuite software can be downloaded free of charge. In addition to the USB interface, the 4-pin aquabus interface can be used to directly connect the fill level sensor to an aquaero 5 controller (not included in delivery). The alarm output can be configured to be used as a rpm signal to be connected to a fan connector with fault detection (for example motherboard fan headers) or to be used as a switched output for example to connect a LED. Fill level and external temperature sensor input can be configured to raise an alarm. The external temperature sensor input is compatible with all Aqua Computer temperature sensors.All variants are also available with a nano coating that will cause water to roll off the inner surface of the borosilicate glass tube.Technical details:Dimensions without pump: approx. 56 x 67 x 198 mmFilling volume: approx. 150 mlConnection threads: G1/4Compatible to the following pumps:- aquastream XT- Eheim 1046 and pumps identical in constructionScope of delivery:One ReservoirThree sealing screws G1/4 (preinstalled)Please note: Fittings and pump are not included in delivery, please order seperately.>
The aqualis series reservoirs are equipped with a borosilicate glass tube which, unlike the acrylic glass commonly used for tube reservoirs, has very high hardness and scratch resistance, very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 75 mm and a wall thickness of 5 mm. The base and lid of the aqualis series are made of Delrin, the lid and bottom are connected by a nickel-plated brass tube. A visual highlight is the integrated water column effect. If the return line is connected to the central connection of the aqualis, the water flows through the central brass tube to the cover and exits through eight openings, which is a real eye-catcher especially in connection with lighting. A thin acrylic sheet close to the bottom of the aqualis minimizes air entry into the circuit. Alternatively, the return can be connected to a side port, the water then flows back from the ground into the surge tank. For this configuration, a baffle is included, which in turn ensures good ventilation of the circuit. The aqualis XT variants also have an acrylic glass window integrated into the floor and can accommodate up to six LEDs (not included) and are also equipped with electronic level measurement with USB and aquabus interface, a configurable alarm output and an external temperature sensor input , For monitoring and configuration the software aquasuite is available for download. The four-pin aquabus interface also allows direct connection to an aquaero 5 controller (not included). The alarm output can either be configured as an artificial tacho signal for connection to a fan output with tacho signal evaluation (eg of the mainboard) or as a switching output, for example for switching an LED in the event of an alarm. For alarm monitoring, in addition to the measured level, the external temperature sensor input is also available. The external temperature sensor input is compatible with all temperature sensors offered by Aqua Computer. This variant is additionally provided with a nano-coating, whereby the water simply bubbles off from the inside of the glass tube. This creates a very special optical water-drop effect, which visually enhances the entire expansion tank visually. Note:Please note that the expansion tank is supplied without connections, these must be purchased separately. Technical details:Dimensions: 80 x 80 x 300 mm (W x H x D)Filling volume: 880 mlScope of delivery: 1x Expansion tank with mounted pressure compensation membrane in the lid 1x stainless steel holder 1x internal USB connection cable 1x baffle plate made of stainless steel 1x G1 / 4-inch screw plug 1x mounting material
