The ARCTIC M2 Pro is designed to enhance the performance of your M.2 solid state drives. This passive cooler, made from durable aluminum, dissipates heat, helping to maintain optimal operating temperatures and prolong the life of your SSD. Included in the package are two thermal pads, ensuring easy installation and efficient thermal transfer, making it an ideal choice for reliable performance in high-demand environments.
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 22 mm Height: 20 mm Thread: G1/4" Thread length: 5 mm HardTube size: 13 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,023 kg Scope of supply: 1x Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Deep Black Sixpack
360-mm-Radiator mit 44 mm Dicke, Finnen und Kanäle aus Kupfer, exklusives Modding-Design, 8x G1/4-Anschlüsse, hochwertige Verarbeitung, geeignet für Custom-Loops
The high flow 2 flow sensor from Aqua Computer can easily be integrated into the cooling circuit and enables continuous flow measurement. This flow sensor is also equipped with a temperature sensor for recording the coolant temperature. The flow rate is measured by a rotor / impeller that is driven by the coolant flowing through. The rotation speed is recorded without contact using a magnetic measuring system. The optimally calibrated bearing clearance for each sensor ensures minimal running noise. The sensor delivers reliable measured values from approx. 35 l / h to 1000 l / h and is therefore ideally suited for most water cooling systems. A symmetrical structure allows the sensor to be integrated into the system without considering the direction of flow. In addition, the sensor can be operated in any installation position. The very low flow resistance meets the requirements of high flow systems. The high flow 2 has significantly more compact dimensions than its predecessor. In addition to the flow sensor, the very precise and fast water temperature sensor is integrated in the elegant acetal housing. The stainless steel cover of the sensor is magnetically attached without screws. The connection threads are made in G1 / 4 and thus enable operation with a wide range of hose systems. To attach the sensor, three M3 threads are integrated into the base, suitable screws are included in the scope of delivery. Technical specifications: Dimensions: approx. 51 x 41 x 31 mm Connection thread G 1/4 A device with a flow sensor input (see compatibility list) is required to evaluate the flow signal; this is not included in the scope of delivery! Scope of delivery: A flow sensor A connection cable Three screws M3 x 6 mm
120mm PWM fan from APNX, 30mm depth for efficient cooling performance, sleek design with metal frame enclosure, max. 1,800 RPM & max. 3.49 mmH2O static pressure, max. 142.55 m³/h air flow, interchangeable fan blade for reverse airflow, subtle lighting with ARGB LEDs
120mm PWM fan from APNX, 30mm depth for efficient cooling performance, elegant design with metal frame enclosure, max. 1,800 RPM & max. 3.49 mmH2O static pressure, max. 142.55 m³/h air flow, interchangeable fan blade for reverse airflow, subtle lighting with ARGB LEDs
The CORSAIR RS120 ARGB case fan combines performance, silence, and style to enhance your computing experience. With an airflow range of 13.3 - 72.8 cfm and advanced CORSAIR AirGuide technology, it delivers efficient cooling to keep your system running at optimal temperatures. The fan's ARGB LED illumination adds a customizable, vibrant touch to your setup, compatible with major RGB software like ASRock Polychrome RGB, ASUS Aura Sync, MSI Mystic Light Sync, and RGB Fusion 2.0. Its magnetic dome bearing ensures durability and smooth operation, while the Zero RPM fan mode offers a near-silent performance under low loads. With a noise level of only 10 - 36 dBA, the RS120 ARGB is designed to enhance your system's performance without disrupting your environment.
Tootekood: VENTO120ARGBPWM-BKCWWGTIN: 4711085946102Jahutid ja lisad
XPG VENTO 120 ARGB PWM cooling fan is designed for peak performance and style, featuring a 4-Pin PWM connector, ARGB lighting effects, and a Rifle Bearing for quiet operation and durability. Its daisy-chain capability, combined with high static pressure and an auto-restart feature, ensure optimal cooling efficiency. Compatible with all major ARGB management software, it offers limitless customization options. Elevate your cooling setup with the XPG VENTO 120 ARGB PWM fan.
Tootekood: VENTOR120ARGBPWM3C-BKCWWGTIN: 4711085947093Jahutid ja lisad
The XPG VENTO R 120 ARGB cooling fan is engineered with an innovative reverse design to optimize airflow intake, keeping your system running smoothly and efficiently. Illuminate your rig with mesmerizing ARGB lighting effects, adding a touch of flair to your gaming setup. Equipped with a 4-Pin PWM connector and daisy-chain capability, installation is a breeze. Plus, the Rifle Bearing ensures quiet operation and long-term durability. Experience superior cooling performance with the auto-restart mechanism for uninterrupted gameplay sessions. Seamlessly integrate with your motherboard ARGB software for customizable lighting control. Elevate your gaming setup with the XPG VENTO R 120 ARGB fan and unleash the power of performance and style.
Keep your system running smoothly with our reliable and affordable X-8 thermal paste, which is the perfect choice for everyday users, gamers, and DIY enthusiasts who want to keep their computer cool, quiet, and stable under any load. Ideal for both beginners and experienced users Designed with both performance and convenience in mind, the X-8 thermal paste is the perfect choice for everyday users, gamers, and DIY enthusiasts. X-8 contains a silicone oil-based carrier, mixed with aluminum and zinc oxide powder. Created to enhance the thermal performance of CPU and GPU cooling, X-8 is ideal for use in both air and liquid cooling systems. The well-balanced formula ensures excellent thermal conductivity and good durability, making application easy, while providing the durability needed to resist the pump-out effect. Durable enough to resist the pump-out effect The pump-out effect occurs when thermal paste is gradually squeezed out from between the heat spreader and the CPU cooler base plate, due to deformation caused by temperature changes under load. Materials like silicone and copper, with different thermal expansion rates, make the effect more noticeable, especially when a copper cooler is used on the graphics chip. At lower temperatures, the pump-out effect is less severe, which is why the X-8, with its low viscosity, is ideal for lower thermal output CPUs. Signs that the thermal paste needs to be replaced include the CPU temperature rising and the clock speed decreasing.
Tootekood: TG-MY-DD-P-RGB-I1851-V1GTIN: 4260711991165Jahutid ja lisad
Thermal Grizzly Intel 1851 Mycro Direct-Die Pro RGB V1 - Ultimate CPU cooling for enthusiasts! Unleash the full power of your Intel LGA 1851 CPU with the Thermal Grizzly Mycro Direct-Die Pro RGB V1 water cooler. This high-end cooler was specially developed for decapitated CPUs and enables unrivalled cooling performance through direct contact with the die. Features: Direct-Die Cooling: Maximum heat dissipation through direct contact with the CPU die. Microfin cooler: Made of nickel-plated copper for optimal heat transfer. Integrated RGB lighting: Stylish design with addressable RGB LEDs. High-quality materials: acrylic glass and anodized aluminum for durability and aesthetics. Optimized cooling channels: Efficient heat dissipation through jet system and optimized slot width. Easy installation: G1/4 inch connections for standard water cooling systems. Compatible with LGA 1851 socket: Supports all Intel CPUs with this socket type (see compatibility list). Advantages: Lower CPU temperatures: Unleash the full potential of your CPU with maximum cooling performance. Improved overclocking capabilities: Achieve higher clock speeds thanks to effective heat dissipation. Stable operation: Prevent overheating and protect your hardware. Individual look: Adapt the RGB lighting to your system. Durable construction: High-quality materials guarantee years of use. Important instructions: Only suitable for decapitated CPUs! The heat spreader must be removed. Decapitating the CPU is done at your own risk and will void the warranty. The Intel 1851 Mycro Direct-Die Pro RGB V1 replaces the ILM of the mainboard. Thermal pads are not recommended. Scope of delivery: 1x Intel 1851 Mycro Direct-Die Pro RGB V1 water cooler 4x mounting screws 2x L-keys (hexagon socket & Torx) 1x pressure test report
Tootekood: PH-F140M25R_G2_DBK01GTIN: 886523003625Jahutid ja lisad
PHANTEKS M25 Gen2 fans are ideal if you want to combine maximum cooling performance with stylish design. Thanks to their optimized blade design, high static pressure, and integrated RGB lighting with an infinity mirror, they ensure effective cooling along with an impressive look.140-mm PWM fan in blackDaisy-chaining for fewer visible cablesOptimized for use in front of radiators or behind meshDigitally addressable RGB LEDs and infinity mirrorReverse blade for a clean look and good airflowMax speed: 1,800 RPM at 40.95 dB(A)170.02 m³/h maximum airflow and 2.04 mmH2O static pressureRubber pads at the corners to decouple disturbing vibrations
Tootekood: PH-F140M25_G2_DWT01GTIN: 886523003540Jahutid ja lisad
The PHANTEKS M25 Gen2 fans are ideal if you want to combine maximum cooling performance with stylish design. Thanks to their optimized blade design, high static pressure, and integrated RGB lighting with an infinity mirror, they ensure effective cooling along with an impressive look.140-mm PWM fan in whiteDaisy-chaining for fewer visible cablesOptimized for use in front of radiators or behind meshDigitally addressable RGB LEDs and infinity mirrorMax speed: 1,800 RPM at 35.13 dB(A)172.92 m³/h maximum airflow and 2.23 mmH2O static pressureRubber pads at the corners to decouple disturbing vibrations
Tootekood: PH-F120M25_G2_DWT01GTIN: 886523003489Jahutid ja lisad
The PHANTEKS M25 Gen2 fans are ideal if you want to combine maximum cooling performance with stylish design. Thanks to their optimized blade design, high static pressure, and integrated RGB lighting with an infinity mirror, they ensure effective cooling along with an impressive look.120-mm PWM fan in whiteDaisy-chaining for fewer visible cablesOptimized for use in front of radiators or behind meshDigitally addressable RGB LEDs and infinity mirrorMax speed: 2,000 RPM at 35.13 dB(A)123.55 m³/h maximum airflow and 2.51 mmH2O static pressureRubber pads at the corners to decouple disturbing vibrations
120-mm PWM fan with aluminum framePractical wireless connection for fewer visible cablesDaisy-chaining on the fans for easy connection and mountingIntegrated display for stunning effectsSpeed, LCD, and lighting controllable via Lian Li L-Connect 3 softwareWhisper-quiet cooling with max. 1,900 RPM at 27 dB(A)105.33 m³/h max. airflow and max. 2.9 mmH2O static pressureRubber pads to decouple disturbing vibrationsIncludes controller for controlling lighting and fan speedWireless ARGB LCD Fans for Clean Cable ManagementThe UNI FAN TL Wireless LCD from Lian Li offers an efficient solution for cable management in your PC. With its wireless 2.4 GHz control for lighting effects and fan speed, you need significantly fewer cables, simplifying your system build. The fan offers dual-zone lighting effects and is easy to install and comes with an integrated LCD for displaying system information or individual graphics.Connection System for Seamless Fan ClustersThe installation of the Lian Li UNI FAN TL Wireless series follows the smart concept of other Lian Li fans: The fans are equipped with contact points and are easily connected through the practical connection system. Multiple fans can be joined together into a cluster.UNI FAN TL Wireless LCD: Easy Installation and Full ControlThe UNI FAN TL Wireless LCD can be easily installed and controlled thanks to the L-Wireless controller. Through the wireless connection, you control both RGB lighting and fan speed directly through your motherboard, without the need for unnecessary cables.Adjustable Display and Quiet PerformanceThe LCD version of the UNI FAN TL Wireless allows you to customize the content on the built-in 1.6-inch IPS display. With the L-Connect 3 software, you can display your own videos, images, and system information. Thanks to Fluid Dynamic Bearing (FDB) technology, the fans run quietly and efficiently, even at high speeds of up to 1,900 RPM. This provides powerful cooling and an aesthetically pleasing solution for your PC, making traditional fans fade into the background compared to UNI FAN TL Wireless LCD!
Der Sharkoon A40 RGB ist ein Single-Tower-Luftkühler, der mit 4 leistungsstarken Heatpipes ausgestattet ist, die eine effiziente Wärmeübertragung von der CPU zum Kühlkörper gewährleisten. Mit einem präzise steuerbaren 120-mm-Lüfter mit RGB-Beleuchtung, Kompatibilität zu selbst den neusten CPU-Sockeln sowie einer guten TDP von 220 W ist er darauf ausgelegt auch bei anspruchsvollen Anwendungen stets eine optimale Temperatur zu halten.
