Jahutid ja lisad

Kompakter 360 mm Radiator für Wasserkühlungen, aus Kupfer, hohe Finnendichte, für besonders kleine Custom-Loops, für Hardware aus dem High-End-Segment

Alphacool Eisbaer Pro Aurora 420 11774

Black top-down cooler for narrow cases A 120 mm PWM fan provides plenty of fresh airflow Six copper heat pipes for rapid heat dissipation Compatible with AMD and Intel sockets Support for high RAM modules Powerful CPU air cooler with a flat design The Akasa ALUCIA H6L M2 is a CPU cooler in a top-down design. The quiet 120 mm PWM fan offers high cooling potential. It is compatible with AMD and Intel sockets, with a TDP of up to 150 W. The six copper heat pipes ensure rapid heat dissipation. The 120 mm fan operates at 700 to 2,000 RPM and produces a very low noise level of no more than 31.5 dB(A) with a flow rate of 70.66 m³/h. The Akasa ALUCIA H6L M2 is compatible with many common AMD and Intel sockets. Thanks to its clever design, the cooler is also compatible with cases of narrow width.

Jahutid, NovaPeak 240 ARGB Black, Silverstone

Der SHARK Mirror RGB PWM ist ein leistungsstarker Gehäuselüfter mit RGB-Beleuchtung, der in einem Drehzahlbereich von 500 bis 1.500 U/min passgenaue Leistung liefert. Dank Infinity-Spiegel-Effekt ist der Lüfter dabei sogar besonders stylisch im Gehäuse. Die aerodynamischen Lüfterblätter des SHARK Mirror RGB PWM sorgen für einen maximalen Luftdurchsatz von bis zu 99,52 m³/h. Selbst bei voller Leistung überschreitet der SHARK Mirror RGB PWM einen Geräuschpegel von leisen 26,8 dB(A) nicht.

Sharkoon Ventola PC 120mm RGB PWM Vaikne Must - Komponentide Jahutus

Die Alphacool Apex Distro Plate ist das optische Upgrade für das Dark Base Pro 901. Speziell für dieses Gehäuse entworfen, ersetzt sie das Front Cover und hebt jede Custom-Wasserkühlung auf das nächste Level. Ein Must-Have für alle, die höchste Leistung und Design vereinen möchten. Die aus hochwertigem Acrylglas gefertigte Apex Distro Plate, ermöglicht einen freien Blick auf den Wasserkühlkreislauf. Das Zusammenspiel der aRGB-Beleuchtung sorgt für ein beeindruckendes Farbspiel, das das Gehäuse perfekt in Szene setzt.

Inter-Tech Kühler ARGUS Iceman B-360 AIO Wasserkühlung

Der SHARK Mirror RGB PWM ist ein leistungsstarker Gehäuselüfter mit RGB-Beleuchtung, der in einem Drehzahlbereich von 500 bis 1.500 U/min passgenaue Leistung liefert. Dank Infinity-Spiegel-Effekt ist der Lüfter dabei sogar besonders stylisch im Gehäuse. Die aerodynamischen Lüfterblätter des SHARK Mirror RGB PWM sorgen für einen maximalen Luftdurchsatz von bis zu 99,52 m³/h. Selbst bei voller Leistung überschreitet der SHARK Mirror RGB PWM einen Geräuschpegel von leisen 26,8 dB(A) nicht.

360mm PWM case fan with single-frame design in white Optimized for use in front of radiators or behind mesh Digitally addressable LEDs for stylish RGB lighting PWM-controlled speed range from 700 to 1,800 RPM High maximum airflow of 75.74 m³/h at 31.6 dB(A) Jonsbo ZA-360 Reverse Blade: High-performance and quiet case fan Looking for a fan that delivers excellent cooling performance and makes your PC stand out? The Jonsbo ZA-360 Reverse Blade leaves nothing to be desired! This PWM fan impresses with stunning RGB lighting and a mirror effect on the sides. With reverse-blade fans, you can create airflow in the opposite direction while still presenting the stylish side. This ensures you always see the impressive side of the fan in your case, even with reverse airflow—for a uniform look inside your build. Easy installation and control thanks to the single-frame design The intelligent single-frame design combines three fans and the frame into one unit, making installation and lighting control much easier since individual fans do not need to be connected separately. It offers maximum stability, a compact build, and a clean design without sacrificing performance. Suitable for cases, radiators, and CPU air coolers The ZA-360 is equipped with nine rotor blades, providing a maximum airflow of 75.74 m³/h and a static pressure of 1.71 mmH2O. Control is managed via a PWM signal in the range of 700 to 1,800 revolutions per minute. At full load, the fan reaches a noise level of 31.6 dB(A). Thanks to the high-quality hydraulic bearing and efficient lubrication, vibrations are effectively reduced for reliable and quiet operation. Stylish fan with RGB lighting and infinity mirror effect A standout feature of the Jonsbo ZA series is the powerful ARGB lighting in the frame, combined with a stylish 400-layer mirror effect on the fan sides. The lighting can be controlled directly through your motherboard or with third-party software such as Asus Aura Sync or RGB Fusion. The aluminum frame ensures a robust and durable housing.

Jonsbo ZL-120WR PWM ARGB vastupidised ventilaatorid 3-pakk, 120mm, valge

Extremely powerful dual-tower cooler with 260 W TDP Six 6-mm heatpipes 2x PWM fans in 120mm format High compatibility with AMD and Intel Bracket for easy installation Integrated lighting on fans and frame The Jonsbo CR-3000E CPU Cooler: The Jonsbo CR-3000E CPU cooler offers extremely high cooling performance thanks to its six heatpipes and PWM fans. In addition, this very quiet cooler features immense cooling reserves with a TDP of 260 W, making it ideal for overclocked CPUs and easy to install even with the motherboard already mounted. Sleek design with powerful cooling performance The CR-3000E is a high-performance dual-tower cooler that enables very efficient and quiet cooling with its two fans. The smooth-running fan motors reduce vibrations and, together with the bearing, ensure a very long lifespan. Perfect cooling for your CPU including lighting effects Thanks to six high-performance heatpipes, the heatsink ensures excellent heat dissipation. The cooler's large fin surface, due to its dual-tower design, transfers a particularly large amount of heat to the airflow. Additionally, built-in lighting enhances your setup and adds an extra visual highlight.

Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - Asus ROG Astral GeForce RTX™ 5090 32GB GDDR7 (90YV0LW1-M0NA00) - Asus ROG Astral GeForce RTX™ 5090 32GB GDDR7 OC Edition (90YV0LW0-M0NA00) - Asus ROG Astral LC GeForce RTX™ 5090 32GB GDDR7 (90YV0LW3-M0NA00) - Asus ROG Astral LC GeForce RTX™ 5090 32GB GDDR7 OC Edition (90YV0LW2-M0NA00) Technical data cooler Complete dimensions (L x W x H): 260.25 x 160.90 x 34.32mm Radiator base material: chrome-plated copper Material radiator top: Acrylic Material Terminal: nylon Material connection thread: Brass Maximum working temperature: 60°C Pressure tested: 0.8 bar Connections: 4 x G1/4" Thickness of radiator base: 3.25mm Thick cooling fins: 0.4mm Distance between cooling fins: 0.4mm Lighting: digital aRGB LEDs Power connection digital aRGB LEDs: 3-pin JST Voltage digital aRGB LEDs: 5V Number of digital aRGB LEDs: 12 Color: transparent Technical data backplate Dimensions (L x W x H): 260.25 x 132.50 x 6mm Thick backplate without spacers: 3mm Material: aluminum Warranty: 3 years

Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - MSI GeForce RTX™ 5090 32G GAMING TRIO OC - MSI GeForce RTX™ 5090 32G SUPRIM LIQUID SOC (MS-V530 Ver:2.1) - MSI GeForce RTX™ 5090 32G SUPRIM SOC (MS-V530 Ver:2.1) - MSI GeForce RTX™ 5090 32G Vanguard SOC - MSI GeForce RTX™ 5090 32G Vanguard SOC Launch Edition Technical data cooler Complete dimensions (L x W x H): 222.40 x 160.81 x 34.12mm Radiator base material: chrome-plated copper Material radiator top: Acrylic Material Terminal: nylon Material connection thread: Brass Maximum working temperature: 60°C Pressure tested: 0.8 bar Connections: 4 x G1/4" Thickness of radiator base: 3.25mm Thick cooling fins: 0.4mm Distance between cooling fins: 0.4mm lighting: digital aRGB LEDs Power connection digital aRGB LEDs: 3-pin JST Voltage digital aRGB LEDs: 5V Number of digital aRGB LEDs: 10 Color: transparent Technical data backplate Dimensions (L x W x H): 222.40 x 132.24 x 6mm Thick backplate without spacers: 3mm material: aluminum Warranty: 3 years

Alphacool presents its new graphics card water coolers for the latest Nvidia GeForce RTX generation. They are part of the Core product series and combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers offer outstanding cooling performance. At the center of the cooler is the one-piece milled copper cooler, complemented by a precision-machined brass terminal with a nylon cover. Chrome plating makes the copper cooler more durable and provides a smoother, brighter surface than conventional nickel plating. The visual design of the GPU water cooler has been changed only slightly. A special highlight is the newly added Core emblem above the jet plate, which underscores its affiliation with the Core series and visually enhances the design. The series continues to rely on high-quality brass fittings, guaranteeing optimal quality and safety. The specially adapted aluminum backplate covers the entire rear of the copper cooler and ensures a clean and uniform appearance. The acrylic, in combination with the aRGB lighting, enables even and impressive illumination of the entire cooler. Technically, the GPU water cooler has been completely redesigned. To optimize cooling performance, the gaps between the cooler and the PCB components were redefined and tested. The water flow was simulated using state-of-the-art software and verified in practical tests. These extensive tests enabled improvements to the cooler base and nozzle to ensure the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility: - PNY GeForce RTX™ 5090 ARGB EPIC-X RGB™ Overclocked Triple Fan GPU - PNY GeForce RTX™ 5090 ARGB EPIC-X RGB™ Triple Fan GPU - PNY GeForce RTX™ 5090 Overclocked Triple Fan GPU - PNY GeForce RTX™ 5090 Triple Fan GPU Technical data cooler - Complete dimensions (L x W x H): 218.40 x 148.57 x 34.38mm - Radiator base material: chrome-plated copper - Material radiator top: Acrylic - Material Terminal: Acetal - Material connection thread: Brass - Maximum working temperature: 60°C - Pressure tested: 0.8 bar - Connections: 4 x G1/4" - Thickness of radiator base: 3.25mm - Thick cooling fins: 0.4mm - Distance between cooling fins: 0.4mm - Lighting: digital aRGB LEDs - Power connection digital aRGB LEDs: 3-pin JST - Voltage digital aRGB LEDs: 5V - Number of digital aRGB LEDs: 9 - Color: transparent Technical data backplate - Dimensions (L x W x H): 218.40 x 120.00 x 6.00mm - Thick backplate without spacers: 3mm - Material: aluminum Warranty: 3 years

Gelid Ultimate TP-GP04-R-E

Inter-Tech Kühler A-41 1HE aktiv AMD Socket sWRX8,sTRX4,TR4

The new generation of Alphacool NexXxoS radiators, a name that is known for experience and quality, is here to breathe new life into the radiator market!Everyone who uses watercooling needs a radiator, and everyone has different requirements for the heat exchanger. Naturally, consumers want the product that's best in class. The Alphacool NexXxoS radiators are here to challenge the best in their class, and be crowned the best radiators in every area and size. No more back and forth - with Alphacool NexXxoS radiators, you know what you're getting!Alphacool has been a trendsetter on the scene for developing and improving radiators for years. That's why these models are among the first radiators to really earn the descriptor "full copper"! All the main elements, not just the fins and channels, but also the channel heads are made of copper. Material-wise, this is a big advantage, and one where other radiators fall by the wayside. The Alphacool NexXxoS X-Flow radiators set themselves apart significantly from conventional radiators in their construction. The X-Flow radiators are built for high flow rates. The slanted copper chambers on either side are built identically. This means the water can flow through all the channels at the same time until it flows into the opposite chamber and leaves the radiator.Freedom in the installation is one of the central points on which Alphacool's development department focused. Both copper chambers have three 1/4" threads. That means connections can be attached on the top, bottom and at the front or back (not on the NexXxoS ST30). Fewer angles are needed, which increases the flow rate and offers more options in the installation. Here, too, Alphacool carries the standard sizes of the 120mm series. Different strengths, 30mm, 45mm and 60mm underscore the wide spectrum that these radiators cover. The installation of the radiators, as well as the fans and radiator faceplates, is easy to do with this series: the M3 threads are standard in the radiator sector, affordable and available in all lengths.Even the dreaded mishap of turning the screws in too deeply won't lead to costly damage with this radiator: an inner protective edge stops the screw before it can come into contact with the fins.The fin spacing was chosen so that the radiator could reach its optimal cooling performance even with slow or medium-speed fans. This is not only comfortable in terms of background noise, but also puts no constraints on the choice of fans. All in all, it's where experience and powerful performance meet with a forward-looking approach and sophisticated solutions.Alphacool NexXxoS Radiators - the one tool for all your cooling needs! Technical dataCooling channelsCopperColorblackFan threadM3SlatsCopperThickness39 - 49mmConnection2x G1/4"Lüftergröße140mm [7]Number of fans3HousingSteelManufacturerAlphacoolFins per inch16Pressure tested0,8 barQuantity of cooling channels28

The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)468 x 144 x 86mmQuantity of cooling channels58Cooling channelsCopperColorblackFan threadM3Number of fans3Connection6x G1/4"SlatsCopperThickness69 - 100mmHousingSteelManufacturerAlphacoolPressure tested0,8 barFins per inch10Fan size140mm

For more than a decade, Alphacool has dominated the market with its Full Copper radiator series. Our extensive portfolio of radiator variants is unique worldwide, just like our manufacturing process, which enables us to craft all water-bearing parts and cooling fins from pure copper. Thanks to their exceptional performance, these radiators can effortlessly dissipate even extremely high waste heat, making them indispensable in many sectors of the cooling industry.The next step in evolution: HPE Full Copper Radiator!The Full Copper HPE Radiator uses the same materials as the previous NexXxoS models but takes a technical step forward. With a denser internal structure, the number of water channels and copper fins has been increased. This design ensures a larger water volume is in direct contact with the cooling fins, significantly enhancing heat transfer. The increased number of fin rows and their shortening also results in a much more efficient utilization of the cooling surface. Comparison tests with the conventional NexXxoS radiator have demonstrated that the HPE radiator can achieve a performance improvement of 4.5K. At higher ambient temperatures and fan speeds, the performance gap between the HPE and standard NexXxoS radiators increases progressively, with possible performance gains of up to 6K.Connection options & mountingThe HPE radiator features two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side, there is a fill or drain port for filling and draining the water circuit. The radiator comes with all necessary screws for case and fan installation. Additional screws are typically not required.Safety firstThe HPE radiator is equipped with special protective plates beneath all mounting holes to prevent screws from being inserted too deeply. This ensures the cooling fins and water channels underneath are protected from damage.Patented screw plugsAll HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often prevent the radiator from being installed flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface, allowing for easy and seamless installation in the case. Technical dataL x W x H391.5 x 124 x 45mm (+/- 3%)Quantity of cooling channels24Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size120mmPossible fan assembly3x one-sided / 6x both-sidedThread size fan mountingM3Pressure tested0.8 BarMaximum working temperature60°CFin density16 FPIWeight1240gColorwhiteWarranty: 10 years???? Warranty Terms

For more than a decade, Alphacool has dominated the market with its Full Copper radiator series. Our extensive portfolio of radiator variants is unique worldwide, just like our manufacturing process, which enables us to craft all water-bearing parts and cooling fins from pure copper. Thanks to their exceptional performance, these radiators can effortlessly dissipate even extremely high waste heat, making them indispensable in many sectors of the cooling industry.The next step in evolution: HPE Full Copper Radiator!The Full Copper HPE Radiator uses the same materials as the previous NexXxoS models but takes a technical step forward. With a denser internal structure, the number of water channels and copper fins has been increased. This design ensures a larger water volume is in direct contact with the cooling fins, significantly enhancing heat transfer. The increased number of fin rows and their shortening also results in a much more efficient utilization of the cooling surface. Comparison tests with the conventional NexXxoS radiator have demonstrated that the HPE radiator can achieve a performance improvement of 4.5K. At higher ambient temperatures and fan speeds, the performance gap between the HPE and standard NexXxoS radiators increases progressively, with possible performance gains of up to 6K.Connection options & mountingThe HPE radiator features two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side, there is a fill or drain port for filling and draining the water circuit. The radiator comes with all necessary screws for case and fan installation. Additional screws are typically not required.Safety firstThe HPE radiator is equipped with special protective plates beneath all mounting holes to prevent screws from being inserted too deeply. This ensures the cooling fins and water channels underneath are protected from damage.Patented screw plugsAll HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often prevent the radiator from being installed flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface, allowing for easy and seamless installation in the case. Technical dataDimensions (L x W x H)391.5 x 124 x 30mm (+/- 3%)Quantity of cooling channels12Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size120mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0.8 BarMaximum working temperature60°CFin density18 FPIWeight790gColorwhiteWarranty: 10 years???? Warranty Terms

Inter-Tech jahutus A-38 2HE Active AMD sTRX4, TR4, SP3

FSP Air CPU Cooler MP7-WA LGA/1851/1700/1200 AMD:AM4/AM5 retail

Thermalright Peerless Assassin 120 120mm

Super Micro jahutus Supermicro 2U Active CPU Heat Sink LGA4677 4th/5th Gen Intel

The Gecko Pro LX is an active M.2 SSD cooler that ensures your drive does not overheat and always operates at full performance. The 20-mm fan spins at speeds of up to 12,000 RPM, with a barely audible sound level of 26 dB(A).The aluminum cooler efficiently transfers heat from your M.2 drive. With its compact size, it fits into smaller cases without looking bulky. Note that this cooler is only compatible with M.2 SSDs using the 2280 format.Technical DetailsColor: BlackMaterial: AluminumDimensions: 70 x 21.9 x 25 mm (W x H x D)Weight: 52.9 gCompatibility: M.2 2280Functionality: M.2 SSD coolerFan:Dimensions: 20 x 8 x 20Bearing: Hydrodynamic bearingSpeed: 3,600 - 12,000Noise level: 26 dB(A)

The GIGABYTE AORUS GP-ECFAN1201 ICE case fan enhances cooling performance while adding visual appeal. With a 120 mm diameter and a height of 25 mm, this fan operates with a rotation speed ranging from 600 to 2000 rpm, ensuring efficient air circulation. It provides an air flow of 60 cfm and an air pressure of 2.75 mm, balancing performance and noise, ranging from 8.2 to 29 dBA.Equipped with ARGB technology, the fan delivers vibrant lighting effects that can be synchronized with other compatible components. Its daisy-chain design simplifies installation, allowing for easy connectivity of multiple fans. The features and mounting kit make integrating the GP-ECFAN1201 into any build straightforward.

The GIGABYTE AORUS GP-ECFAN1201 case fan combines performance and visual allure with its ARGB features. Designed with a 120 mm diameter, this fan operates at a rotation speed ranging from 600 to 2000 rpm, ensuring optimal airflow of 60 cfm. It is engineered for efficient cooling while maintaining a noise level between 8.2 to 29 dBA, making it ideal for any PC build. Featuring a daisy-chain design and EZ Connect functionality, the fan offers a DIY friendly experience for users. With a hydro dynamic bearing, it promises longevity with an MTBF of 40,000 hours. Mounting hardware and all essential accessories such as fan cables and ARGB cables are included for hassle-free installation.

Thermalright Peerless Assassin 120 Digital ARGB Black 120mm

Kühler Thermaltake UX150-L ARGB Black (Intel 1851) retail

Endorfy Pactum 1 25 g (EY0C002)

Die CT140 Reverse ARGB Sync PC-Lüfter sind Thermaltakes Generation von PWM-Lüftern, die für viele PC-Nutzungsszenarien geeignet sind. Die Reverse Lüfter der CT-Serie haben eine Lüfterdrehzahl von 1800 U/min und sind mit speziell abgestimmten Lüfterblättern ausgestattet, welche die Luft weiter befördern können. Das kabelintegrierte Daisy-Chain-Design sorgt für mehr Flexibilität beim Kabelmanagement, und die 9 adressierbaren LEDs können über die Motherboard-Synchronisationssoftware für spektakuläre Lichteffekte gesteuert werden.

Thermaltake CT120 EX ARGB Sync PC Cooling Fan Gravel Sand 3Pack

Thermaltake CT140 EX ARGB Sync PC Cooling Fan Gravel Sand 3Pack

Thermaltake CT120 EX ARGB Sync Cooling Fan Racing roheline 3 Pack

Thermaltake CT140 EX ARGB Sync Cooling Fan Racing roheline 3 Pack

Thermaltake CT140 EX Reverse Fan Bumblebee 3 Pack ARGB Sync