EK-Quantum Vector Strix RTX 3080/3090 Backplate - Nickel is a CNC-milled backplate made of nickel-plated aluminium that fits all EK-Quantum Vector Strix RTX 3070/3080/3090 water blocks. The backplate covers the full length of the graphics card PCB, serves as an aesthetic addition and also provides passive cooling for the back of the voltage regulator module (VRM), the GPU core and the VRAM on the 3090 cards. Enclosed: EK-Quantum Vector Strix RTX 3070/3080/3090 back plate - nickel Assembly mechanism Thermal pads
The EK-Quantum Vector Strix RTX 3070 D-RGB from EK is a complete cooler for the graphics card of the ROG Strix RTX 3070 from ASUS. The high-quality workmanship and the nickel-plated copper material used for the heat sink are striking. The copper covers all important areas of the graphics card, such as GPU, memory and voltage converter. The optimised channel structure provides very efficient and reliable cooling. Visually, the cooler is rounded off with a black acetal lid and has four G1/4" connections. But there's more: an addressable D-RGB strip is also integrated, which provides a little illumination even on dark gaming days. The graphics card cooler is compatible with the common RGB synchronisation technologies of all major mainboard manufacturers. Technical Data Material: Nickel-Plated Copper (bottom), Acetal (cover) Color: Black Thread: 4x G1/4" D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground) D-RGB LED count: 6 D-RGB cable length: 500mm Compatibility Asus ROG Strix RTX 3070 Scope of Delivery EK-Quantum Vector Strix RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
Die drei 4pin PWM 120mm RGB-Lüfter von Argus bieten, im Zusammenspiel mit dem optional erhältlichen RGB LED-Streifen, eine tolle Beleuchtung für PC-Gehäuse und bieten mit der beiliegenden Funk-Fernbedienung und der Steuerungseinheit über 300 verschiedene Effekte und Modi. Wem das nicht ausreicht, kann zudem über den integrierten 5V RGB-Header (adressierbare RGB-LEDs), alle RGB-LEDs synchron über das Mainboard verwalten und steuern. Die jeweils 8 integrierten RGB-LEDs pro 120-mm-Lüfter, die sich im inneren Ring befinden, sorgen für außergewöhnliche Lichteffekte. Gummierte Auflagen unterhalb der Befestigungslöcher verhindern bei den Lüftern zuverlässig die Übertragung von Vibrationen auf das PC-Gehäuse und sorgen für einen laufruhigen Betrieb bei bis zu 1200 U/min und 22 dBA. Das Set lässt sich problemlos mit bis zu fünf weiteren, optional erhältlichen Argus RS-061 RGB-Lüftern und zwei weiteren Argus RS-042 RGB LED-Streifen erweitern.
EK-Loop Angled Bracket is a steel mounting bracket that enables the user to mount the FLT style combo units or reservoirs perpendicular to any 120mm (105mm hole spacing) fan mounting holes. This will allow more airflow to freely pass through the case, or just to offer new mounting options which are not supported by the case itself. Additionally, you can use the long or the short side of your FLT product for additional mounting options. This bracket also allows offsetting the product by about 50mm in each direction with the rail system it uses, because the screws are not in a fixed location. This bracket is not limited to FLT series products, even though it was engineered for it. With a bit of imagination, you can also use it for mounting radiators or any products with 120mm fan mounts. Made from press-bent 1,5mm thick painted steel. Scope of Delivery EK-Loop Angled Brackets (left + right + base brackets) 4x polyamide washer M4 0.8mm 4x acetal spacer 4x screws M4x4 DIN7984 8x screws M4x10 DIN7984 4x nut M4 Allen key 2.5mm
EK Quantum Flow Indicator D-RGB is a high-quality flow indicator with addressable RGB lighting, which belongs to the Quantum Line. It visually represents the coolant flow rate, which is often difficult to see with the naked eye. This can be very useful to immediately see if your loop is in perfect condition or if there are problems with the pump or flow. In addition, this is a very elegant cast acrylic part covered by a nickel-plated aluminium cover. It has three G1/4" connectors, all of which are female. It can be mounted in the middle of a tube with two fittings or attached to a radiator or pump at each G1/4" connection. Each of the threads, can be used either as an inlet or outlet. This product is compatible with the common RGB synchronisation technologies of all major motherboard manufacturers. The nickel-plated aluminium cover hides the LED hotspots and provides uniform illumination. Enclosed: EK-Quantum Flow Indicator D-RGB – Nickel 1x G1/4" nickel-plated brass plug
The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. It has a total of seven G1/4" ports and the tube itself is made of acrylic. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Silver, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
Schwarz beschichtetes Compression Fitting von EK Water Blocks, für Röhren mit 14 mm OD, Kompatibel zu Röhren aus Acryl / PETG / Kupfer / Messing / Edelstahl, 6er Pack
This is the 2nd generation Vector GPU water block from the EK® Quantum Line, designed for EVGA® FTW3 RTX 3070 graphics cards based on the latest NVIDIA® Ampere™ architecture. For a precise compatibility match of this water block, we recommend you refer to the EK Cooling Configurator. An EK Water Block for FTW3 RTX 3070 EK-Quantum Vector FTW3 3070 D-RGB water block is compatible with FTW3 RTX 3070 graphics cards. The Vector water block actively cools the GPU, VRAM, power stages, and chokes in the VRM (voltage regulation module). These newly developed water blocks feature optimized flow paths that reduce hydrodynamic instabilities and vortexing (dead spots) inside of them. The EK-Quantum Vector Series water blocks use an Open Split-Flow cooling engine design, which proved to be a superior solution for GPU water blocks. It is characterized by low hydraulic flow restriction, meaning it can be used with weaker water pumps or pumps running on low-speed settings, and still achieve top performance. The jet plate and fin structure geometry have been optimized to provide even flow distribution with minimal losses and optimal performance when used in any given coolant flow orientation. The fin array is populated by 28 microfins with 0.6mm wide microchannels that provide optimal cooling performance, without unnecessary flow restrictions or clogging hazards. The base of the block is CNC-machined out of nickel-plated electrolytic copper, while its top is CNC-machined out of durable POM acetal. These 2nd generation Vector GPU water blocks also feature Acetal terminals. The watertight sealing is ensured by high-quality EPDM O-rings, while brass standoffs are already pre-installed and allow for a safe and easy installation procedure. D-RGB lighting on EK-Quantum Vector FTW3 RTX 3070 D-RGB water block The aesthetic corner end-piece is housing the addressable D-RGB LEDs. This water block boasts a total of 8 individually addressable RGB LEDs, and it is compatible with popular RGB sync technologies from all major motherboard manufacturers. The arrow marking on the 3-pin D-RGB LED connector is to be aligned with the +5V marking on the D-RGB (addressable) header. Backplate for the EK-Quantum Vector FTW3 3070 water block EK recommends the purchase of a retention backplate, especially for the 3070 models of graphics cards. The backplate improves the overall aesthetics of your graphics cards and also provides additional passive cooling for the GPU core, and backside of the printed circuit board VRM section. Technical Specification Dimensions: (LxHxW) - 314x155x21mm Enclosed EK-Quantum Vector FTW3 RTX 3070 D-RGB series high-performance water block Mounting mechanism with screw-in brass standoffs Necessary mounting screws, nuts, and washers 2x Nickel plated brass plug G1/4” EK-Loop Multi Allen Key (6mm, 8mm, 9mm) Thermal pads Thermal grease EK-TIM Ectotherm (1g)
The Protium reservoir from Singularity Computers is a 200mm tube with a diameter of 60mm. Together with the attachments made of acetal, the reservoir reaches a height of 239mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 x 60 x 239 mm (L x W x H) Diameter: 60 mm Material: Acetyl (lid, base), Acrylic (reservoir), Aluminium (retention rings) Color: Transparent, Black Threads: 7x G1/4" Scope of Delivery: 1x 200 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
The Protium expansion tank from Singularity Computers is a 250mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 289mm. The tube itself is made of acrylic and has a total of seven G1/4" ports. Technical Data: Dimensions: 60 × 60 x 289 mm (L x W x H) Diameter: 60 mm Material: acrylic (reservoir, lid, base), aluminium (retention rings) Color: transparent, black/li> Ports: 7x G1/4" Scope of delivery: 1x 250 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
PERFEKTE LÜFTER-REGULIERUNG DURCH PWM Die PWM-Funktion signalisiert über das Motherboard genauestens mit welcher Geschwindigkeit der Lüfter laufen muss. Damit wird eine maximale Kühlleistung bei minimalem Geräuschpegel garantiert. PWM SHARING TECHNOLOGY (PST) SENKT DEN GERÄUSCHPEGEL Durch die PST Funktion wird sichergestellt, dass alle Gehäuselüfter auf ein Signal arbeiten. Somit können alle Gehäuselüfter einheitlich eingestellt werden. INNOVATIVES DESIGN FÜR LEISE UND EFFIZIENTE BELÜFTUNG Durch das innovative Design der Lüfterblätter wird der Luftfluss verbessert und somit ist die Belüftung positiv beeinflusst. Das Lüfterrad wurde mit dem Fokus auf einen minimalen Geräuschpegel entworfen und bietet einen verbesserten Luftfluss und Druck. Abmessung: 120 x 120 x 25 mm Technische Daten: Geschwindigkeit: 230 - 1350 rpm Luftstrom: 53 CFM/ 90.1 m³/h Statischer Druck: 1 mm H₂O Geräuschpegel: 0.3 Sone Betriebsumgebungstemperatur: 0 - 40 °C Lüfterrahmen: Standard Kontrolltyp: PWM PST Anschluss: 4-Pin-Connector + 4-Pin-Socket Lüfterlager: Fluid Dynamic Bearing Typische Spannung: 12 V DC Anlaufspannung: 6 V Stromstärke/ Spannung: 0.12 A / 12 V Kabellänge: 400 mm
Pure Loop 2 FX 360mm is the impressively high-performing and silent All-in-One water cooling unit with impressive ARGB illumination for overclocked systems. Impressively high cooling performance for all consumer CPUs 3 Light Wings 120mm PWM high-speed fans offer equally high air pressure and vibrant ARGB illumination Doubly decoupled PWM pump for quiet operation and minimal vibration ARGB-PWM-Hub enables synchronization of up to 6 ARGB components and PWM fans Combination of ARGB illumination, all-black design and aluminum-style for unmistakable and stylish look Easy-to-access refill port and included coolant bottle guarantee a long lifespan PURE LOOP 2 FX 360mm Liquid, LGA1150/LGA1151/LGA1155/LGA1200/LGA1700/LGA2011-3/LGA2066/SAM4/SAM5 Fan speed 2500rpm, Fan light Noise level, max 34 dB, Dimensions 397 x 120 x 52mm Weight 1.54 kg
Get high-performance cooling, display a favorite animated GIF or static image, monitor real-time PC performance metrics, see music that's currently playing, stream browser content and more with NZXT CAM software.2.36 diameter wide-angle LCD display with 640x640 resolution and 60 Hz refresh rate provides a sharp image from any viewing angle Screen supports the display of custom images, animated GIFs, and CAM system info with adjustable orientation Powerful Asetek pump provides optimal cooling and up to 2,800 RPM whisper-quiet operation Includes F140/F120 RGB Core fans Includes RGB Controller, RGB Fans, & USB Y-Cable Single breakout cable simplifies installation Rubber tubing is reinforced with nylon-braided sleeves to prevent leaks CAM enables display customization, fan and pump speed control, and RGB lighting effects Control custom screen content, RGB, pump speed, and zero-noise fan curves with NZXT CAM software.
ROG RYUO III 360 ARGB WHITE EDITION ROG Ryuo III 360 white edition all-in-one liquid CPU cooler with Asetek 8th gen pump solution, Anime Matrix™ LED Display and ROG ARGB cooling fans - The latest 8th gen Asetek pump is armed with a 3-phase motor that delivers ultimate cooling performance with higher flow and lower impedance - The ASUS-exclusive Anime Matrix™ is a mini LED array that can display ROG-exclusive anime content, core system stats, and customized animations - Premium ROG ARGB fans offer high airflow and optimized noise levels - Aluminum components and vacuum coating provide high durability and flagship aesthetics - The ROG Ryuo series is styled to complement the ROG motherboards at the heart of a high-end build
PURE LOOP 2 240mm Silent and powerful cooling The Pure Loop 2 240mm is an impressively powerful and quiet all-in-one water cooler with ARGB illumination for users with lightly overclocked systems. Extremely high cooling performance for all consumer processors 2 Pure Wings 3 120mm PWM high-speed fans offer high static pressure with very quiet operation Dual decoupled PWM pump reduces vibrations to an absolute minimum ARGB illumination on the cooling block, combined with all-black design and aluminium elements for a unique and stylish appearance Easily accessible filling port and included coolant bottle guarantee long service life Flexible hoses and convenient installation ensure easy handling 3-year manufacturer's warranty
Der ENDORFY Stratus 140 PWM ist ein leiser, aber sehr leistungsstarker Lüfter. Der Stratus 140 PWM bietet einen optionalen semi-passiven Modus, sodass er bei einem niedrigen Pegel des Steuersignals stehen bleibt. Der Stratus 140 PWM wurde in Zusammenarbeit mit Synergy Cooling entwickelt.
Der Thermaltake Riing Quad 12 RGB ist der erste 4-Ring-Radiator Lüfter mit 54 LEDs an der Vorderseite, der die NeonMaker-Lichtbearbeitungssoftware und TT RGB PLUS unterstützt. Der PWM-gesteuerte 120-mm-Lüfter besitzt ein langlebiges Hydrauliklager und ein Kompressions-Lüfterblatt Design, das eine bemerkenswerte Kühlleistung liefert und dazu einen leisen Betrieb bietet.
Kryonaut on professionaalne termopasta, mis on mõeldud kõige nõudlikumatele kasutusvaldkondadele – alates ekstreemsest overclockingust kuni tööstuslike jahutussüsteemideni. Selle erakordne soojusjuhtivus ja kuivamiskindel koostis tagavad maksimaalse jõudluse ka kõrgetel temperatuuridel. • Mõeldud ekstreemseks overclockinguks • Väga kõrge soojusjuhtivus • Ei kuiva ega kõvene • Pikaajaline töökindlus • Ei juhi elektrit
The CORSAIR iCUE Link RX120 RGB Triple Starter Kit is a comprehensive solution for enhancing the cooling and aesthetics of desktop computers and servers. This kit includes three 120 mm fans, designed with CORSAIR AirGuide technology for precise airflow direction, ensuring efficient cooling. The fans feature magnetic bearings for quiet operation and durability, with a noise level range of 10 - 36 dBA. With Pulse-width modulation (PWM) support and Zero RPM fan mode, users gain advanced control over fan speeds, allowing for a perfect balance between cooling efficiency and noise. Additionally, the kit's RGB lighting capabilities, managed through the Corsair iCUE software, offer vibrant, customizable lighting options to complement any system modding project. The package also includes a mounting kit, making installation straightforward. Certified with multiple compliance standards, including RoHS and UKCA, this kit is a reliable and visually appealing choice for system builders and enthusiasts alike.
The Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details Material Brass Colour White Hight 23 mm Diameter 26 mm Thread length 5 mm Thread G1/4“ HardTube size 16 mm Compatibility PETG, acrylic, brass and glass tubes Weight 42 g Download Datasheet PDF: Alphacool Eiszapfen PRO 16mm HardTube Fitting G1/4 - White Sixpack Fitting Map: You can find an interactive map of all Alphacool fittings here.
The Alphacool ES quick-release connector is optimized for use in server and workstation systems. It is characterized by precise manufacturing quality, excellent water flow and a secure click mechanism for sealing.Maximum flow rateOther quick couplings can negatively affect the flow of water. The quick coupling has therefore been fundamentally redesigned so that the water flow is hardly disrupted. Particular emphasis was placed on minimal processing tolerances.Quick and easyThe ES quick connectors from Alphacool simplify the assembly of server and workstation systems. Thanks to the convenient handling, complex systems can be connected quickly and easily. To open the quick-release fastener, the outer ring is pulled back. The seal closes immediately and prevents coolant from escaping. To lock the quick-release fasteners, simply push them into each other. A clicking noise confirms secure locking.Note: To avoid damaging the O-ring, do not open or close the quick-release fastener when it is dry. Technical dataDimensions (L x D)67 x 28mmWeight140gMaterielnickel-plated brass, plasticThread2x 1/4" OTColorchrome, black
