The new 90-degree fitting from Alphacool's Enterprise Solutions series was developed especially for Alphacool's TPV hoses. The screw-on nozzle rotates and uses a double O-ring system to prevent leaks. Technical DataDimensions (L x W x H)35 x 27 x 18 mmMaterialbrass/aluminiumPressure test8 barThreadG1/4"Thread length5,5 mmHose size12,7 / 7,6 mm
The new fittings from Alphacool’s Enterprise Solutions series were specially developed for the Alphacool TPV tubing. The metal connection can be tightened with the TPV hose and has a very high tensile strength. Technical Data: Material: Brass/Aluminium Colour: Black Length: 24 mm Diameter: 18 mm Thread: G1/4" Hose size: 12,7 / 7,6 mm
Tootekood: RZ34-02140700-R3M1GTIN: 8887910000168Jahutid ja lisad
HAARA KONTROLL Halda oma arvuti õhuvoolu ja müra RAZER PWM PC ventilaatori kontrolleriga. Kasuta hõlpsalt Razer Synapse'i tarkvara, et avada ja kohandada impulsi laiuse modulatsioonikõveraid kuni 8 ventilaatori jaoks ning nautida madalamat mürataset võrreldes traditsiooniliste alalisvoolutoitega ventilaatorite seadistustega. ÜHENDUB KUNI 8 VENTILAATORIGA Razer PWM PC ventilaatori kontroller, mis on loodud pakkuma pinget ja PWM-juhtimist kuni 8 ventilaatorile, toetab mitmesuguseid arvutiehituse nõudeid ja pakub täielikku süsteemi juhitavust. KOHANDATUD VENTILAATORIKÕVERA PROFIILID Loo Razer Synapse'i abil kohandatud ventilaatorikõvera profiile ja lase oma arvutikorpuse ventilaatoritel automaatselt oma kiirust süsteemi temperatuuri alusel reguleerida. VENTILAATORITE JÄLGITAVUS Optimaalse jõudluse tagamiseks jälgi ja reguleeri ventilaatorite kiirust ühest intuitiivsest liidesest Razer Synapse tarkvara kaudu. ÕHUKE PROFIIL Razer PWM PC ventilaatori kontrolleril on madala profiiliga disain ja magnetiline tugi, mis muudab selle paigaldamise arvuti korpuses kitsastesse kohtadesse lihtsaks.
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The slanted edges of the nut make sure the O-ring sits tight against the HardTube, so that it is even more secure than in its predecessors. This provides more security in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Compression Fitting 16mm This connector has a 1/4" outer thread. The other side fits HardTubes with an outer diameter of 16mm. Technical Details Material: brass Colour: chrome Dimensions Diameter: 21mm Height: 18mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - chrome sixpack
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Socket 16mmThis connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 16mm. Technical Specifications: Material: Brass Colour: Chrome Dimensions: Diameter: 21mm Height: 18mm Scope of Delivery: 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - Chrome
With the "Icicles", Alphacool has created a true masterpiece. These connections promise absolute tightness and high quality. Suitable for all hard metal pipes with an outer diameter of 12mm. On the other side of the connection there is the usual ¼” thread. Available in deep black and chrome. First, the union nut is put on the pipe, followed by a plastic washer that protects the O-ring and the thick O-ring itself. Now the pipe is simply put into the connection in which the second O-ring is already sitting, which fits very tightly against the pipe. As a last step, the union nut is pushed onto the connection and screwed on. Due to the size, the union nut cannot be screwed on tightly enough. But this has also been thought of, as an 8 mm hexagon key can be inserted from below to hold the connection in place. scope of delivery 1x Alphacool Eiszapfen 12mm HardTube screw-on nozzle G1/4 - Deep Black
CORSAIR Hydro X series XF Fitting Adapters make it easy to add Y splits, 45° or 90° angles to your custom cooling system's tubing, whether you use hardline, compression or barbed fittings.
10mm barb fitting made from nickel-coated brass with O-ring for PVC, PU ,PA, silicone or PE hoses with an inner diameter of 10mm. G1/4" outer threads. threads straight, SW 14. Note for watercooling beginners:The connectors for imperial hoses(7/16“, 3/8“, ½“) are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp. Overview:10mm (3/8“) hose clamp: up to 8mm none, from 10mm up required10mm (7/16“) hose clamp: up to 8mm none, from 10mm up required12mm (1/2“) hose clamp: up to 11mm none, from 12mm up required13mm (1/2“) hose clamp: up to 11mm none, from 13mm up required
Verlängerungsadapter von Bitspower Touchaqua, G1/4 Zoll AG auf Link Tube, Male Adapter, längenverstellbar 16 bis 22 mm, 2er-Pack, Schwarz (Glorious Black)
With these compression fittings, Alphacool has created another masterpiece. These connectors promise both absolute impermeability and high quality. Fits all hard metal tubes with an outer diameter of 13mm. On the opposite side of the connector is the standard 1/4" thread. Available in deep black and chrome. First, the swivel nut is placed onto the tube, followed by a plastic plate which protects the O-ring and then the thick O-ring itself. Now the tube can easily be inserted into the attachment, where the second O-ring is tightly fitted to the tube. The final step is to slide the swivel nut onto the attachment and screw it into place. Due to its size, the swivel nut is not so easy to screw into place tightly. But even this was taken into account in the design, and so you can insert an 8mm hexagon wrench from underneath to hold the attachment tight. Scope of Delivery: 1x compression fitting 13mm
With these compression fittings, Alphacool has created another masterpiece. These connectors promise both absolute impermeability and high quality. Fits all hard metal tubes with an outer diameter of 13mm. On the opposite side of the connector is the standard 1/4" thread. Available in deep black and chrome. First, the swivel nut is placed onto the tube, followed by a plastic plate which protects the O-ring and then the thick O-ring itself. Now the tube can easily be inserted into the attachment, where the second O-ring is tightly fitted to the tube. The final step is to slide the swivel nut onto the attachment and screw it into place. Due to its size, the swivel nut is not so easy to screw into place tightly. But even this was taken into account in the design, and so you can insert an 8mm hexagon wrench from underneath to hold the attachment tight. Scope of Delivery: 1x compression fitting 13mm
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The connecting nut’s slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Socket 13mmThis connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 13mm. Technical Specifications: Material: Brass Colour: Deep Black Dimensions: Diameter: 21mm Height: 16mm Scope of Delivery: 1x Alphacool Eiszapfen 13mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - deep black
