The LB360-S ARGB Sync AIO Liquid Cooler from Thermaltake features a distinctive RGB water block with a segment LCD. The display shows the CPU temperature, CPU load, and fan speed in real time, keeping users informed about system performance. The water block is both stylish and practical. Equipped with three powerful 120-mm ARGB fans that reach speeds of up to 1900 rpm, it delivers excellent cooling efficiency. With pre-installed fans on the radiator and outstanding cable management, it simplifies installation.
The Jonsbo CR-1000 MAX V2 Standard is a powerful tower CPU cooler for gaming and performance PCs. With six 6 mm heatpipes and a 120 mm PWM fan, it offers high cooling headroom for modern processors. 6x 6 mm heatpipes – Efficient heat transfer for stable temperatures even under load. 120 mm PWM fan – Automatic speed adjustment for quiet, demand-based operation. Direct-contact base – Direct contact with the CPU for improved heat transfer. Aluminum tower heatsink – Large surface area for effective heat dissipation. Wide socket compatibility – Supports common Intel and AMD platforms. Strong cooling performance with 6 heatpipes The six 6 mm heatpipes transport waste heat away from the processor particularly efficiently. This keeps the CPU reliably cool even under higher workloads. That makes the cooler ideal for performance-oriented systems. Optimized heat transfer The direct-contact base ensures direct heat absorption from the CPU. Heat is transferred more quickly to the heatpipes and distributed throughout the heatsink. This increases the overall efficiency of the cooling system. Balanced noise levels thanks to PWM Thanks to PWM control, the fan speed automatically adapts to the system temperature. During idle operation, the system remains pleasantly quiet; under load, cooling performance increases as needed. This creates a good balance between performance and noise levels.
The Alphacool HardTube Bending Kit Basic is a versatile tool set for all those who want to equip their PC with Hardtubes. The Hardtube Basic Kit contains the most important tools needed for bending HardTubes.Alphacool Acrylic Tubing Pipe Reamer (article 29115)The Alphacool deburring tool has three sharp edges, with steel blades to deburr cut HardTube from the inside and remove rough sections. On the other side of the tool are the steel blades to deburr the cut outside edge of the HardTube. Making a perfect seal with your connectors.Alphacool Eiskoffer HardTube saw tool (article 29134)With this mitre box, cutting HardTubes is a cinch. Its special rubberised channels for 13mm and 16mm HardTubes prevent the tubes from sliding around and getting scratched. The mitre box can be anchored with two small screw clamps.Alphacool Acrylic Double Bending Tool 12/14/16mm (article 29124)Alphacool now has a bending tool for different sizes, which makes laying and bending HardTubes super easy! HardTubes with a thickness of 12-14 mm as well as 16mm are all no problem. Curves of up to 180° bend neatly and easily. With the red rubber measurement guide, you can set the size of the straight section of tubing in centimeters.Alphacool pit saw for Acryl/PETG tubes (article 29125)The Alphacool pit saw for acryl/PETG tubes is no ordinary saw from the hardware store. Its special saw blade with fine teeth makes it perfectly suited for cutting acryl/PETG tubes. This saw blade eliminates the usual problems. Even when first placed against the tube, the teeth cut through the acryl so smoothly that there is no slipping around. Any breaking or ripping of the tube at the last few cuts is also eliminated, thanks to the fine saw teeth. It’s a familiar problem: you want to make a straight cut with the saw, but because of the thin saw blade, every cut you make gets a little more crooked?! Not an issue here. This saw blade is just thick enough not to tilt, but still thin enough to get a precise cut. With Alphacool’s pit saw, every cut is neat and straight, down to the last pull.Alphacool Silicon Bending Insert 100cm with 10mm & 13mm diameter (article 29117 & 29126)For perfect bends in the Alphacool HardTubes now there is the perfect solution. Simply insert the silicone inside the HardTube and heat the desired location. Thanks to the extremely heat-resistant silicone the pipe can be bent without the curved point kinking. After cooling, the silicone can be easily removed. Technical data
The FP1 from APNX is a powerful fan for any PC case. With its elegant frame design, the FP1 gives every case a radiant look. The impressive fan width of 30 mm ensures 30 to 50% higher cooling performance. The elegant frame of the FP1 and the integrated ARGB lighting complement any design. In addition, the lighting can be switched on and off as desired. Each APNX FP1 fan comes with an extremely thick shock-absorbing pad. Fan type Color: black EAN 4711530963494 Manufacturer no. APF3-PF11257.11 Type Case fan Quantity 3 Volume 33.2 dB Features LED lighting LED lighting Yes, addressable RGB header Color RGB RGB standard RGB LED Speed 500 to 1,600 rpm Fan bearing Hydraulic Volume flow 74.6 cfm Air pressure Up to 2.26 mm/H2O Power connection 4-pin PWM Voltage range 5 - 12 volts Fan1 dimensions Number: 3 pieces, width: 120 mm, height: 120 mm, depth: 30 mm
When developing the ARCTIC P12 Pro LN, particular emphasis was placed on reduced running noise and an optimized speed range. Instead of extreme peak values, the LN series relies on a balanced relationship between performance and smoothness. The P12 Pro LN is therefore particularly suitable for use on heat sinks, radiators as well as pinhole covers and filters. Fan type Color black EAN 4895265001116 Manufacturer no. ACFAN00348A P12 Pro LN series Type of case fan Use for PC cases Fastening screwed Volume 23.5 dB to 0.3 Sone Speed 450 to 2,000 rpm Fan bearing FDB - Fluid Dynamic Bearing Volume flow 83 m?/h (49 cfm) Air pressure up to 3.5 mm/H2O Power connector 4-pin PWM Voltage range 3.3 - 12 volts Cable length 40 cm Dimensions Fan1 quantity: 1 piece, width: 120 mm, height: 120 mm, depth: 25 mm Weight case fan 184 grams Total weight 184 grams
Der DeltaMate Extender - FF14 verfügt über jeweils zwei G1/4”-Innengewinde (Female) und bietet ein hochwertiges Finish in Form einer mattschwarzen Chrombeschichtung, die zudem leicht zu reinigen ist. Als Verlängerungsanschluss wird der Extender zwischen dem Anschluss an der Wasserkühlungskomponenten und dem Fitting verwendet und vergrößert den Abstand um 14 mm.
Das schwarz verchromte DeltaMate Pass Through Fitting wird an einer Durchführung in einem Panel, beispielsweise einer Gehäusewand oder einer PCI-Slotblende, verwendet. Die Stärke des Panels kann bis zu 5,5 mm betragen und der Durchmesser der Durchführung zwischen 18 und 22 mm liegen.
DarkFlash DM20 LINE Cooling Fan (White)The DarkFlash DM20 LINE is a 120 mm fan with a classic blade design that combines high cooling performance with a modern, industrial-style design. The distinctive right-angle frame ensures structural stability, while the subtle ARGB lighting with linear light strips, an illuminated ring, and a dual infinity mirror effect on the sides gives your computer a futuristic look. Add to that an airflow of up to 56.0 CFM, static pressure of up to 1.8 mmH₂O, a speed range of 800 to 1600 RPM, and a maximum noise level of 32.5 dBA. All of this translates to effective cooling of your hardware and efficient yet quiet operation.Industrial design with an aluminum accentThe DM20 LINE model stands out with its minimalist design featuring sharp lines and clearly defined edges. The central aluminum badge with a distinctive CD pattern gives the fan an elegant, metallic accent that perfectly complements modern gaming PCs.ARGB with infinity mirror effectThe DarkFlash DM20 LINE offers striking ARGB lighting that covers the front lines, the LED ring, and dual infinity mirror effects on the sides. The surface light strips can be linked together to create a cohesive visual effect when installing multiple fans side by side. Additionally, support for the 5V 3-pin ARGB connector allows synchronization with popular motherboard systems such as ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion 2.0, and ASRock Polychrome RGB.Efficient cooling and quiet operationThe fan is equipped with 7 blades (without lighting) and a hydraulic bearing, which ensures stable and durable operation. PWM control automatically adjusts the rotational speed to the temperature of the components, maintaining an optimal balance between performance and quiet operation. With a maximum airflow of 56.0 CFM and a static pressure of 1.8 mmH₂O, the DM20 LINE model performs excellently even during more demanding tasks. Furthermore, 8 anti-vibration pads effectively dampen vibrations at the point of contact with the case, reducing resonance and unwanted noise. With a maximum noise level of 32.5 dBA, the fan won’t disturb your work—even when running more demanding programs.IncludedFanUser manualSet of mounting screws ManufacturerDarkFlashModelDM20 LINEColorWhiteFan dimensions120 × 120 × 25 mmBearingHydraulicRotational speed800–1600 ±10% RPMMaximum airflow56.0 CFMMaximum noise level32.5 dBAMaximum static pressure1.8 mmH₂OConnectors4-pin PWM + 3-pin ARGBFan input power1.2 WStart-up voltage7 VFan operating voltage12 V DCFan input current0.1 ARGB power consumption1.25 WRGB rated voltage5 VRGB rated current0.25 ABacklightingARGBBlade layoutClassic
Der DeltaMate Rotary - T ermöglicht eine modulare Kombination mit anderen DeltaMate Rotary- und Extender-Fittings dank seiner kompakten Bauweise. Der DeltaMate Rotary - T verfügt über ein G1/4”-Außengewinde (Male) und zwei G1/4”-Innengewinde (Female) und bietet ein hochwertiges Finish in Form einer matten Nickelbeschichtung, die zudem leicht zu reinigen ist. Beim Einsatz weiterer Fittings wird das Drehgelenk mechanisch verriegelt, um maximale Sicherheit sicher zu stellen. Eine optionale, drehbare Abdeckkappe mit DeltaMate-Logo zur optischen Aufwertung ist im Lieferumfang enthalten.
Der DeltaMate Extender - MF10 verfügt über jeweils ein G1/4”-Außen (Male)- und Innengewinde (Female) und bietet ein hochwertiges Finish in Form einer matten Nickelbeschichtung, die zudem leicht zu reinigen ist. Als Verlängerungsanschluss wird der Extender zwischen dem Anschluss an der Wasserkühlungskomponenten und dem Fitting verwendet und vergrößert den Abstand um 10 mm. Kann mit einem DeltaMate Rotary Fitting kombiniert werden, um einen direkten Ersatz für drehbare Fittinge zu schaffen.
Der DeltaMate Verschlussstopfen ist ein flacher Stopfen zur Abdichtung beliebiger G1/4"-Innengewindeanschlüsse. Er bietet ein hochwertiges Finish in Form einer matten Nickelbeschichtung, die zudem leicht zu reinigen ist.
Der DeltaMate Rotary - FF90° ermöglicht durch seine kompakten Abmessungen eine modulare Kombination mit anderen DeltaMate Rotary- und Extender-Fittings. Der DeltaMate Rotary - FF90° verfügt über jeweils zwei G1/4”-Innengewinde (Female) und bietet ein hochwertiges Finish in Form einer matten Nickelbeschichtung, die zudem leicht zu reinigen ist. Beim Einsatz weiterer Fittings wird das Drehgelenk mechanisch verriegelt, um maximale Sicherheit sicher zu stellen.
Der DeltaMate Extender - FF14 verfügt über jeweils zwei G1/4”-Innengewinde (Female) und bietet ein hochwertiges Finish in Form einer matten Nickelbeschichtung, die zudem leicht zu reinigen ist. Als Verlängerungsanschluss wird der Extender zwischen dem Anschluss an der Wasserkühlungskomponenten und dem Fitting verwendet und vergrößert den Abstand um 14 mm.
Der DeltaMate-Anschluss HT14 in Schwarz ist für Röhren (Hard-Tubes) aus harten Kunststoffen und Metallen mit einem 14-mm-Außendurchmesser geeignet. Das HT14-Fitting ist für eine einfache Vermessung der Länge und Installation konzipiert. Dazu wird das Rohr nicht in das Fitting eingeführt, sondern auf dessen Oberseite montiert. Für ein edles Finish, das gleichzeitig gut zu reinigen ist, werden die Fittinge mit einer matten Nickelbeschichtung versehen. Die flache Basis erlaubt die Montage des Rohrs aus jeder Richtung bei voller Sichtbarkeit.
Thermal Grizzly DeltaMate Extender - MM7R Black: Modular G1/4" Accessory from the Thermal Grizzly DeltaMate Fitting System Thermal Grizzly DeltaMate Extender - MM7R Black is part of the modular Thermal Grizzly DeltaMate fitting system for custom water cooling loops. Via two male G1/4" threads, it connects two components with female ports, and its freely rotatable design allows flexible re-adjustment of orientation after installation. Key Features: Modular DeltaMate System: Compatible with the entire Thermal Grizzly DeltaMate fitting system for flexible loop layouts. G1/4" Thread: Compatible with all common water cooling components with a standard G1/4" port. Precision Brass: CNC-machined brass ensures dimensional accuracy and long service life. High-Quality MM7R Black Finish: For a clean, long-lasting appearance. Technical Specifications: Type: Thermal Grizzly DeltaMate Extender - MM7R Black Material: Brass Thread: G1/4" Finish: MM7R Black Ideal for: Thermal Grizzly DeltaMate Extender - MM7R Black is ideal for: custom loops built with the modular Thermal Grizzly DeltaMate system users who want to specifically extend their fitting layout with Thermal Grizzly DeltaMate Extender - MM7R Black With Thermal Grizzly DeltaMate Extender - MM7R Black in MM7R Black, you extend your Thermal Grizzly DeltaMate fitting system with a high-quality, precision-machined component.
Thermal Grizzly DeltaMate Fitting - HT14 Black: Modular G1/4" Accessory from the Thermal Grizzly DeltaMate Fitting System Thermal Grizzly DeltaMate Fitting - HT14 Black is part of the modular Thermal Grizzly DeltaMate fitting system for custom water cooling loops. As a compression fitting for hard tubing, it ensures a secure, tight grip on PETG or acrylic hard tubes of the specified outer diameter. Key Features: Modular DeltaMate System: Compatible with the entire Thermal Grizzly DeltaMate fitting system for flexible loop layouts. G1/4" Thread: Compatible with all common water cooling components with a standard G1/4" port. Precision Brass: CNC-machined brass ensures dimensional accuracy and long service life. High-Quality HT14 Black Finish: For a clean, long-lasting appearance. Technical Specifications: Type: Thermal Grizzly DeltaMate Fitting - HT14 Black Material: Brass Thread: G1/4" Finish: HT14 Black Ideal for: Thermal Grizzly DeltaMate Fitting - HT14 Black is ideal for: custom loops built with the modular Thermal Grizzly DeltaMate system users who want to specifically extend their fitting layout with Thermal Grizzly DeltaMate Fitting - HT14 Black With Thermal Grizzly DeltaMate Fitting - HT14 Black in HT14 Black, you extend your Thermal Grizzly DeltaMate fitting system with a high-quality, precision-machined component.
Thermal Grizzly DeltaMate Extender - MF7 Matt Nickel: Modular G1/4" Accessory from the Thermal Grizzly DeltaMate Fitting System Thermal Grizzly DeltaMate Extender - MF7 Matt Nickel is part of the modular Thermal Grizzly DeltaMate fitting system for custom water cooling loops. The compact micro design connects two components with female ports via two male G1/4" threads, adding only a small amount of distance for tight spaces. Key Features: Modular DeltaMate System: Compatible with the entire Thermal Grizzly DeltaMate fitting system for flexible loop layouts. G1/4" Thread: Compatible with all common water cooling components with a standard G1/4" port. Precision Brass: CNC-machined brass ensures dimensional accuracy and long service life. High-Quality MF7 Matt Nickel Finish: For a clean, long-lasting appearance. Technical Specifications: Type: Thermal Grizzly DeltaMate Extender - MF7 Matt Nickel Material: Brass Thread: G1/4" Finish: MF7 Matt Nickel Ideal for: Thermal Grizzly DeltaMate Extender - MF7 Matt Nickel is ideal for: custom loops built with the modular Thermal Grizzly DeltaMate system users who want to specifically extend their fitting layout with Thermal Grizzly DeltaMate Extender - MF7 Matt Nickel With Thermal Grizzly DeltaMate Extender - MF7 Matt Nickel in MF7 Matt Nickel, you extend your Thermal Grizzly DeltaMate fitting system with a high-quality, precision-machined component.
The Jonsbo XA-120W is a 120 mm fan for gaming PCs and high-performance systems that are meant to combine targeted airflow with addressable lighting. It is suitable for users who want to control their cooling cleanly and visually enhance their setup. PWM control from 700 to 2,400 rpm adjusts the speed flexibly Up to 106.03 m³/h airflow efficiently removes warm air from the case Up to 2.46 mmH₂O static pressure is suitable for tighter mesh surfaces or radiators 3-pin 5V ARGB connector integrates the fan into compatible motherboard lighting Noise level of 21.3 to 37.3 dB(A) for pleasant operation Strong airflow for efficient cooling Depending on the speed, the XA-120W moves up to 106.03 m³/h of air, supporting consistent heat removal. This is particularly useful in gaming systems where the graphics card and processor generate a lot of waste heat under load. The fan helps you keep case temperatures under better control. Targeted performance even with restricted airflow paths With up to 2.46 mmH2O static pressure, the fan remains effective even where air has to be pushed through mesh, dust filters, or radiators. This makes it suitable not only as a classic case fan, but also for more demanding cooling positions. You get more flexibility when building your system without sacrificing airflow performance. Clean control and ARGB styling Using the 4-pin PWM connector, you can regulate the speed precisely and adapt cooling to your system profile. The separate 3-pin ARGB connector enables synchronized lighting with compatible motherboards and controllers. This allows the XA-120W to combine functional cooling with a neat, stylish appearance.
With the fans of the MP, SP, and XP series, PHANTEKS brings powerful fans to the market, with the SP and XP variants (with and without PWM connector) designed for particularly high airflow, while the MP fans (with PWM connector) focus on the highest possible static pressure. The nine fan blades of the PH-F120XP rotor have been further optimized and designed at a perfect angle to achieve an ideal balance between airflow and static pressure: in this 120 mm model with a 4-pin PWM connector, this results in a substantial airflow of 104 m³/h and a static pressure of 1.72 mmH2O at full 12 volts. The fan operates at a maximum of only 27 dB(A), an impressive result made possible in part by the "Maelström Vortex Booster" (MVB) feature. The serrated elevations on the outer edges help to better define the airflow, leading to less turbulence and thus reduced noise emissions. However, all the advantages of an innovative blade design are wasted if the motor and bearing fail, causing the fan to chirp, buzz, and/or rattle. This is, of course, not an issue with PHANTEKS; the fans are equipped with the proven UFB Bearing ("Updraft Floating Balance"), which ensures quiet operation and an extreme lifespan of 150,000 hours. It’s no wonder, then, that PHANTEKS once again confidently provides a very generous five-year manufacturer’s warranty on the PH-F120XP fans. Thanks to the rubber inserts integrated into the fan frame at the 120 mm mounting holes, vibrations are prevented from transferring to the case when the fan is used as a case fan—even at a full 1,500 RPM. Visually, these quiet yet potent fans are also a great addition to any CPU cooler or case: the white rotor with its nine blades sits within a black frame featuring an extraordinary shape and curved supports. The 4-pin connection cable is sleeved in black, as is the included 40 cm extension cable. The package also includes four standard fan screws.
The nickel-plated adapter from Bitspower in the color shiny silver, has a 90 degree angle and is rotatable. One side is intended for mounting hard tubes with an outside diameter of 12mm and the other side has a G1/4" external thread for mounting on radiators and Co. The two rubber rings seal the sides. Technical Data: Material: Nickel-Plated Brass Colour: Shiny Silver Angle: 90° Thread: G1/4 inch Connection: 1x Ø 12 mm
The NA-SAV2 is a fan accessory set consisting of twenty NA-AV2 Anti-Vibration Mounts for up to five fans. Replacing standard fan screws, the NA-AV2 mounts allow for a convenient, quick and vibration-free installation of fans in standard case fan mounting holes. The double-side design makes the NA-AV2 easier to work with in space restricted environments and thanks to the use of premium grade rubber, these mounts are extra soft and highly tear-proof at the same time. Switching standard fan screws for NA-AV2 mounts can drastically reduce structure-borne noises and makes this set a perfect complement for Noctua’s redux and industrialPPC fans! Scope of delivery: 20x Noctua NF-SAV2 Anti Vibrations Mounts
Fins are slightly indented. Minimal scratches. Technical specifications, see product slightly: 35266 Special notes regarding B stock Used Goods: Here we offer goods which have, for example, been returned to us by customers but show signs of having been used. This mostly includes things like fingerprints on the copper, bits of thermal paste or marks on the chips / scratches. Although the products have signs of use, they are technically sound. There is a 12-month warranty on used products. Defective Goods: Here we offer goods which have, for example, been manually damaged by customers, or were noticed in our own quality control checks. These products are defective and generally cannot be used without repairs. Aquatuning is not responsible for either damages which occur on the products or for damages caused through use of these products. Use at your own risk! There is no return or recall policy with defective goods. Returns of used/defective goods: We attempt to name all relevant “flaws”, without guaranteeing completeness. Aquatuning has no obligation to remedy any discrepancies or missing accessories/packaging, etc. The only valid reason for a return is if the wrong product is sent (packing error). Notice: Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days. We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool. Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
Toote kirjeldus inglise keeles:The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs!
With the Alphacool XPX Aurora Pro Eisblock, Alphacool offers a CPU water cooler specially designed for processors with particularly large processor cores. These currently include the AMD Threadripper models and processors from Intel for the LGA 2066 socket and the LGA 3647 server socket in narrow ILM design. As a CPU cooler from the Aurora Design line, the CPU cooler naturally offers integrated digital aRGB lighting.Extremely powerfulThe cooler base has been specially optimized for the large processor cores. With an area of 42 x 58.6 mm and 147 cooling fins the cooling area has been significantly increased. As a comparison, an Alphacool XPX Aurora Eisblock has 81 cooling fins to completely cover the processor core of a normal CPU. Both coolers use the same fin type with a thickness of only 0.2 mm. This clearly shows how far Alphacool has gone to offer the best possible performance. The entire cooler base is of course made of nickel-plated copper and not aluminium. This is due to the increased thermal conductivity of copper. It is almost twice as high as that of aluminium.How is the CPU cooler illuminated?As with all new Eisblock CPU water coolers, Alphacool relies on an integrated aRGB solution. An aluminium frame is flush with the CPU cooler. Of course, the aluminium does not come into contact with the water. The LED frame contains up to 14 addressable digital RGB LEDs. This is more than enough to illuminate the entire cooler even and brightly. The intensity of the illumination can of course be controlled by an appropriate controller. Due to the use of digital RGB LEDs, all known effects can be created, because each LED can be controlled separately with the right controller. The Alphacool Eisblock Aurora Pro cooler can also be connected and controlled via the 3-pin 5V connector on any compatible mainboard. The cable also has an integrated Y-adapter. This makes it easy to connect further Alphacool Aurora products in series without having to order separate Y-adapters. Only additional extension cables may be needed if you want to connect the products in series.Is the assembly difficult?Installation is child's play. Remove the protective film from the base of the cooler, apply some of the enclosed thermal paste to the CPU and then attach the cooler to the board. Depending on the base, the mounting screws are either screwed on before or after mounting. No tools are necessary for the assembly. Alphacool uses knurled screws, which allow a quick and easy assembly.Finally Acryl!The Alphacool Eisblock XPX Aurora Pro is the technical brother of the Eisblock XPX Pro 1U cooler, which was developed especially for the use in server housings. During the development the functionality had a much higher priority than the design, which was kept practical and discreet. The Eisblock XPX Aurora Pro has been optically adapted to the Aurora products and now offers the same design features as you are used to from the Aurora series. This allows you to perfectly match your entire system to each other optically and you don't have to make any compromises. Thanks to the plexiglass look, you can see the water flow beautifully. On the Plexi there is a black frame embedded with a very discreet Alphacool logo in one corner.With the Alphacool LGA 4677 Mounting Bracket (article no.: 13764), this cooler is also compatible with the Intel socket LGA 4677. Compatibility:AMD: AM4 / AM5 / SP3 / SP6 / sWRX8 / TR4 / TR5Intel: LGA 1700 / LGA 2011-3 / LGA 2066 / LGA 3647 / LGA 4189 (optional) / LGA 4677 (optional) Technical data GPU coolerW x T x H79 x 63,8 x 31 mmNet weight545 gMax working temperature60 °CMaterial coolernickel plated copperMaterial bottom partbrassMaterial topAcrylThreads2 x G1/4“Power supply Digital RGB3-Pin 5VPressure tested0,8 barCertificatesCE, FC, ROHS
Toote kirjeldus inglise keeles:Dual panel-mounted socket threads for "internal/external" fittings on a computer chassis L-bracket. The female G 1/4 BSPP threaded couplings can be removed from the L-bracket and used as panel-mountable unions. Nickel-plated brass. This product may need to be temporarily disassembled during installation.
Adressierbare Wing-Boost-3-Lüfter von Alpenföhn, Triple-Set mit 3x 120 mm, digital adressierbare RGB-LED-Beleuchtung (3-Pin), PWM-gesteuert, inklusive Fernbedienung, Empfänger, Splittern & Schrauben
