Toote kirjeldus inglise keeles:If you open your PC again after half a year, perhaps to install new hardware, one wonders most of the time whether the Rechenknecht is not better to call a vacuum cleaner. What makes it easier on the one hand - imagine just how much more often the room would have to be cleaned if all the dirt was not collected as a precaution by the computer - means elsewhere consuming cleaning of the PC interior. In addition, dust in the housing is the main reason for overheating and thus for possible, unstable operation. Although a cleaning time-to-time can not be prevented, however, the effort can be significantly reduced. A simple and cost-effective solution are dust filters, which are placed in front of the sucking fans. Once installed, it is no longer necessary to dedust the entire interior with all its inaccessible corners and sensitive components, only the filters. DEMCiflex offers a particularly easy-to-retrofit solution. Here, the filter is simply placed from the outside of the housing on the fan opening and is held there magnetically. There are therefore no screws or the like necessary, so there is no compatibility restriction. Since not all fan positions are magnetically attractive, an additional frame to the scope of delivery is glued to the back and on which the filter is held. The filter itself consists of a very tightly woven and durable polyester fabric. This special material is also used in clinics, for example to keep operating theaters dust-free. At the same time, the net is well permeable to air and therefore hinders the airflow only slightly. Of course, this effect diminishes with increasing dust, which is why the filter should occasionally be removed and cleaned. This is very simple in many ways. Due to the special mounting method, the removal of the fan is again very easy and fast. Afterwards, the dust can either be brushed, shaken, washed off and even scraped off with stubborn dirt. Finally, a few notes on the installation: First, the question arises, which fans have to be covered at all. As already mentioned, this applies exclusively to the sucking fans. But which are they? The safest way to recognize this is on the fan itself, with two arrows on the outside or inside of the fan frame. If one of the two arrows points towards the interior or if the rotor suspension is aligned with the interior, this is an aspirating fan. These are usually located on the front, side and bottom, whereas the rear and cover fans usually carry the air out of the housing and therefore need not be filtered. In order to maximize the filter effect, an overpressure in the housing can be generated. This means that more volume of air is forced into the housing than is being sucked out of the housing by other fans at the same time. This prevents air (and with it the dust) from entering the interior through other openings that may not have been filtered. If all fans are the same size, you should blow more fans into the housing than pull out. In this case, the power supply is to be counted as an additional, extracting fan, as long as it does not receive its supply (fan side) directly from the outside (occurs at floor mounting). If different fans with different sizes and speeds are used, the respective air volumes (m³ / h) in the data sheets give a good reference value, whereby in turn the total volume of the suction fans must be higher than that of the blowing out fans. Note: The area around the used fan slot should be flat if possible and have no protruding parts. Otherwise, these may impair adhesion to the substrate.
Alphacool's Eiszapfen series is future-oriented and characterized by excellent workmanship and high flow. Ball valves have always been a flow brake, making life difficult for each pump. Then, Alphacool has developed a ball valve represents no obstacle to a diameter of 10mm. The inside scoop closes absolutely tight, thus preventing further escape of liquid. On both sides all 1/4“ connections with a maximum thread length of 6mm can be screwed. This ball valve is available in two different color versions: Chrome and Deep Black. Technical Details: Dimensions (LxBxW): 35,4 x 36 x 22,7mm Color: Chrome Scope of delivery: Alphacool Eiszapfen 2-way ball valve G1 / 4 - Chrome
With the new compression fittings from Alphacool for Plexi, brass or carbon tubes, Alphacool is taking a further step towards perfection and quality. The first two colours, chrome and deep black, offer great variety. The fully coordinated product series allows each system to shine in its own right, and individuality has no limits when paired with the Alphacool Plexi and brass tubes! The colouring is bound fast to the brass surface with a new chromatization process. This ensures the longevity of the intense colour and prevents chipping of the chrome layer. An Alphacool logo on the connector emphasizes the distinctive nature of this product once again. The Function of this Connector is:This connector is used to connect two 16mm Plexi, brass or carbon tubes at a 90° angle. Dimensions: Width: 41.5mm Height: 41.5mm Technical Details: Material: brass, chromatized Colour: deep black Scope of Delivery: 1 x Alphacool HT 13mm HardTube Compression Fitting 90° L-Connector for Plexi, brass tubes - knurled - Deep black
EK-Quantum Magnitude Accent - Purple is an interchangeable inner aesthetic frame for EK's new Magnitude water block. This purple accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks Made in Europe - Slovenia!
EK-Quantum Magnitude Accent - Green is an interchangeable aesthetic inner frame for EK's new Magnitude water block. This green accent is best used on Magnitude water blocks with translucent tops where the LED’s shine inwards, or for those without LED implementation. This Magnitude accent is made of anodized aluminum. Available in several different colors and materials, these accent frames are compatible only with EK-Quantum Magnitude CPU water blocks Made in Europe - Slovenia!
The perfect solution for perfect curves in the Alphacool HardTubes is now available. Simply slide the silicon insert into the plexiglass tube and heat up the desired section. Thanks to the extreme heat resistance of silicon, the tube can be bent without the curved section buckling. After it cools, the silicon insert can simply be pulled out. Available for tubes with 10mm, 12mm, and now 13mm inner diameters, and each size comes in 30cm length for curves in shorter tubes or 100cm length for curves in longer tubes. Technical Details Length: 100cm Thickness: 13mm Colour: blue Scope of Delivery 1x Alphacool silicon bending insert 100cm for ID 1/2” / 13mm HardTubes - blue NoticeDue to the manufacturing process, the diameter can vary by 0.5 - 1mm.
AiO-Wasserkühlung im 240-mm-Format von Alphacool, mit ARGB-Lüftern, variable Pumpleistung, mit Schnellverschlüssen zur einfachen Aufrüstung, kompatibel zu aktuellen AMD & Intel Sockeln
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:A bushing with two 1/4“ inner threads comes in handy for the extension of fittings or for connection of a component with an outer thread to a fitting. Technical specifications:Material: Brass, chromatizedColour: Deep Black Dimensions:Length: 22mmWidth: D17mm Extent of delivery:1 x Alphacool HF socket 2 x G1/4 inner thread - Deep Black This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
• Radio remote control (about 10m range) • 3pin RGB header connector for 5V RGB motherboard control • 16 bright RGB LEDs per 120mm fan • 50cm long RGB LED strip with 15 RGB LEDs included
The ICEBERG THERMAL DRIFTIce Thermal Pad is designed to efficiently transfer heat away from your electronic components. Measuring 40mm by 80mm with a thickness of 2.0mm, this thermal pad offers excellent thermal conductivity. Lightweight at 0.029 kg, it is easy to install and perfect for enhancing cooling performance in tight spaces. Ideal for use in computers, gaming consoles, and other electronic devices, this product ensures your components stay cool and perform optimally.
The ICEBERG THERMAL DRIFTIce Thermal Pad by Iceberg Thermal is a high-performance thermal pad designed for efficient heat dissipation. Measuring 40mm by 80mm with a thickness of 0.5mm, it is ideal for enhancing thermal conductivity in electronic devices. With a lightweight design of only 0.014 kg, it is easy to handle and install. This thermal pad is perfect for maintaining optimal device temperatures, ensuring longevity and performance.
The Black Ice® Nemesis® GTX radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
The Black Ice® Nemesis® GTX radiators are the next generation of computer radiators from Hardware Labs. These radiators offer an improved cooling performance when using
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 10/30cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
Alphacools HardTube family does get an additional sibling. The new HardTubes made out of borosilicate glass certainly bring a new level of quality into every system. The previous method that has been most commonly used for water cooling systems is normal PVC hoses - now Alphacool introduces a new approach to water cooling. The Alphacool HardTube additionally brings more tidiness into the system which enables a further structured impression. Borosilicate glass ticks every box on the checking list for watercooling systems. Stability and a brilliant appearance are not the only qualities that should lead to chosing this glass as even most chemicals and temperature flactuations can not harm the borosilicate glass. The whole chemical industry is depending on this glass and we can certainly say that this is not without reason. All glass tubes are compatible with the Alphacool HardTube connectors. Alphacool currently offers two classical sizes. One tube with a 16mm outer diameter and another with 13mm outer diameter. Further different length with 90° angles are introduced as its not possible to personally deform these tubes. To cut the tubes for the preferred length Alphacool recommends using a diamand cutting disc for the Dremel®. (Additionally availaible in our product line: Diamant cutting disc - Art.No: 1012316 , Dremel® - Art.No: 32196 and 32229 ) The following options are available: HardTube borosilicate glass 13/10mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 13/10mm 40cm and 60cm HardTube borosilicate glass 16/11mm 90° 10/30cm and 20/40cm HardTube borosilicate glass 16/11mm 40cm and 60cm Scope of delivery: 1x HardTube borosilicate glass 16/11mm 90° 20/40cm WARNING: Do not under any circumstances use the usual glass tube cutter to shorten the borosilicate glass tube. Borosilicate glass is a solid glass which can not be cut properly with a normal glas tube cutter. Please refer to a Dremel® with the needed cutting disc. Note: Due to the made-to-fit pipes, the connections must be plugged straight with a little effort. Attention: This article is not compatible with Monsoon fittings. Der8auer: Extremely Expensive Hardtubes and DIY Glass-Cutter
EK-Loop Angled Bracket is a steel mounting bracket that enables the user to mount the FLT style combo units or reservoirs perpendicular to any 120mm (105mm hole spacing) fan mounting holes. This will allow more airflow to freely pass through the case, or just to offer new mounting options which are not supported by the case itself. Additionally, you can use the long or the short side of your FLT product for additional mounting options. This bracket also allows offsetting the product by about 50mm in each direction with the rail system it uses, because the screws are not in a fixed location. This bracket is not limited to FLT series products, even though it was engineered for it. With a bit of imagination, you can also use it for mounting radiators or any products with 120mm fan mounts. Made from press-bent 1,5mm thick painted steel. Scope of Delivery EK-Loop Angled Brackets (left + right + base brackets) 4x polyamide washer M4 0.8mm 4x acetal spacer 4x screws M4x4 DIN7984 8x screws M4x10 DIN7984 4x nut M4 Allen key 2.5mm
The retention rings attach the tops to both ends of the acrylic tubes. As they are included as standard with the Protium reservoirs, this item serves as a replacement or to replace rings of a different colour. Technische Details Material: Aluminium Colour: Black Compatibility: Protium series Scope of delivery 2x retention ring
The retention rings attach the tops to both ends of the acrylic tubes. As they are included as standard with the Protium reservoirs, this item serves as a replacement or to exchange rings of a different colour. Technische Details Material: Aluminium Colour: Silver Compatibility: Protium series Scope of delivery 2x retention ring
The connection for 16mm (AD) Hard Tubes from EK Water Blocks, is a compression fitting made of nickel-plated brass. It is silver in colour and comes from the Torque series, which convinces with a simple and timeless design. Originally intended for the EKWB Quantum series, this fitting is also compatible with other EK products. In this fitting, the union nut serves as a compression ring, which presses the sealing ring onto the hard tube. It thus offers a higher level of safety and sealing than, for example, the fittings of the EK-HD series. As a small feature, the union nut has a recess under which coloured rings are placed, which provide a bit of individuality and are available separately. Technical Data: Material: Nickel-Plated Brass Colour: Silver Supported Tube: 16 mm OD Thread: G1/4", male Thread Length: 4,5 mm Outer Diameter (Fitting): 24 mm Installed Height: 15 mm Compatible Solid Tubing: Acrylic, PETG, Copper, Brass, Stainless Steel
The Protium expansion tank from Singularity Computers is a 100mm tube with a diameter of 60mm. Together with the acrylic attachments, the expansion tank reaches a height of 139mm. It has a total of seven G1/4" ports and the tube itself is made of acrylic. Technical Data: Dimensions: 60 x 60 x 139 mm (L x W x H) Diameter: 60 mm Material: Acrylic (lid, base, reservoir), Aluminium (retention rings) Color: Black, Transparent Threads: 7x G1/4" Scope of Delivery: 1x 100 mm acrylic reservoir 2x Aluminium retention rings 1x 90° quad port cap (bottom) 1x Triple port cap (cover) 1x 16 mm internal acrylic flow standpipe 5x G1/4" stop fittings 2x Silicone O-rings
