Drehbarer 90-Grad-Winkel-Adapter, Teil der EKWB-Quantum-Linie, zur Verbindung von G1/4-Zoll-Außen- mit G1/4-Zoll-Innengewinden, vernickeltem und satiniertem Messing
Der Inter-Tech F-92-S 92x92x25mmist ein laufruhiger Gehäuselüfter mit 92 mm Durchmesser und einem 3 Pin Anschluss. Der Lüfter bietet 1500 U/min, einen Volumenstrom von 32,50 m³/h bei einer Lautstärke von 24 dB(A).
NZXT Quiet Airflow Fans offer high-performance, low-noise cooling for heat-prone PCs. Optimized blades and a chamfered frame provide powerful concentrated air, while fluid dynamic bearings and PWM control keep things quiet and efficient. Nine sickle-style blades are optimized to move large amounts of air, ensuring versatile use for intake or exhaust. Minimal gap between blade edges and frame maximizes the spinning area for higher airflow and reduced turbulence. Chamfered frame design directs air in a powerful concentrated flow pattern, traveling far into the case to cool vital components. Fluid dynamic bearings provide unwavering stability, low-noise operation, and a 60,000-hour lifespan. PWM control dynamically adjusts fan speed for higher output or lower noise based on system temperatures for efficient cooling. Sturdy frame with rubberized corners absorbs vibrations for low-noise operation, even at high speeds.
The CORSAIR RS120 ARGB case fan combines performance, silence, and style to enhance your computing experience. With an airflow range of 13.3 - 72.8 cfm and advanced CORSAIR AirGuide technology, it delivers efficient cooling to keep your system running at optimal temperatures. The fan's ARGB LED illumination adds a customizable, vibrant touch to your setup, compatible with major RGB software like ASRock Polychrome RGB, ASUS Aura Sync, MSI Mystic Light Sync, and RGB Fusion 2.0. Its magnetic dome bearing ensures durability and smooth operation, while the Zero RPM fan mode offers a near-silent performance under low loads. With a noise level of only 10 - 36 dBA, the RS120 ARGB is designed to enhance your system's performance without disrupting your environment.
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 22 mm Height: 20 mm Thread: G1/4" Thread length: 5 mm HardTube size: 13 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,023 kg Scope of supply: 1x Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 - Deep Black Sixpack
The HardTube project has become a reality. Alphacool is breaking new ground and setting a new standard!Up till now, the most commonly used method for connecting water cooling systems was normal PVC tubing - but now, Alphacool is offering another way to set up your system. HardTubes provide more organisation for a system, giving it a distinctly more structured appearance. Available now are the brand-new brass tubes, in black chrome and chrome. With the corresponding connectors and their easy functionality, these tubes can be linked or sealed together for an absolutely leak-proof fit. The plexiglass tubes can be fitted into a system easily with the right bending tools, without requiring extra angled pieces. The tubes must be cut to the right length in order to fit into the system. The following options are available:HardTube 13/10mm Clear Plexi 20cm, 40cm, 60cm and 80cmHardTube 13/10mm brass chrome 20cm and 40cmHardTube 13/10mm brass black chrome 20cm and 40cmHardTube 16/12mm Clear Plexi 20cm, 40cm, 60cm and 80cmHardTube 13/10mm 90° Plexi 10/30cm, 20/40HardTube 16/13mm 90° Plexi 10/30cm, 20/40Reviews:MNPCTech.comNote: Due to the made-to-fit pipes, some effort is required to plug the connections in straight.Scope of delivery:1x Alphacool HardTube 16/13mm 90° Plexi (PMMA) 20/40cm Note: not compatible with Monsoon fittings
Alphacool’s new quick connectors, called the “Eiszapfen” (icicle), are the newest addition to the “Eis” series. High quality and impressive features take every water cooling system a step forward in quality and practicality! A quick-release connector can be used anywhere where expandability, flexibility, or cleanliness play a big role. The compact connectors have a 1/4” thread on both sides, making them compatible with all standard components. The connectors can be separated by pulling down the outer rings. Both sides immediately shut completely, so that no water can leak out. The special N.D.S.L. technology (no drip, no splash, no leak) ensures no water drips, splashes or leaks out while opening the connectors. When the pieces are reconnected, both sides audibly click together and are locked tightly with a double o-ring, which is simply pressed together when reconnecting. This also prevents any deterioration of the o-ring. The mechanism was also designed for longevity, to ensure a secure connections even after several years. Many quick connectors tend to compromise the flow rate. But Alphacool has found a way to solve this problem. These quick connectors can still sustain a high flow rate! Alphacool’s quick connectors are available in two models. In deep black and completely chromatized versions, they fit seamlessly into any system. Technical Specifications: Dimensions (L x D): 64.6 x 23.9mm Material: brass Colour: deep black Thread: 2x 1/4” inner Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit with double bulkhead G1/4 inner thread - deep black Notice: The quick connectors should not be used dry for prolonged periods, as this will put stress on the o-rings and leak tightness can no longer be guaranteed.
Make your liquid cooled system more practical and easier to maintain with your new Eiszapfen quick release fittings. With this fitting you can combine different versions of the quick-release couplings. There are versions with bulkhead connections, with G1/4" external thread or with G1/4" internal thread. This allows you to create the best solution for your own project. No drip - no splash - no leak Alphacool uses the proven N.D.S.L. technology (no dripping, no splash, no leaking) for its Eiszapfen series. This leaves you the freedom to decouple in your running system without dripping. Turn your normal water cooling system into a high flow system! The Eiszapfen quick release fittings are separated by simply pulling the connecting ring. The Alphacool Eiszapfen quick-release fasteners are available in various designs, but can all be combined with each other. A quick-release fastener always consists of two fittings. You always need the right counterpart to create a complete quick release fastener. With this product you only get 1 half of the quick-release fastener. Technical details: Colour: Chrome Thread: G1/4 Material: brass Diameter: 21 mm Length: 40 mm Weight: 0,035 kg
Alphacools Eiszapfen Fitting series is the high-end version of the proven compression fitting!All requirements that are placed on a fitting are met here: Highflow, shape, processing and color scheme. Uncompromising development and manufacturing have made the Eiszapfen what they are. In brilliant white, they blend excellently into any system.Special processes are used to bond the coatings firmly to the substrate. The longevity of the intense colors is thus given and chipping of the coating is prevented. Each fitting has the Alphacool logo which makes it unmistakable in addition to its special shape!The beveled edges of the compression nut press the O-ring tightly against the hose, keeping it securely in place.Sixpack:Since six fittings of one type are often necessary, Alphacool also offers six-packs. Technical dataDimensions (height x diameter)27 x 20mmWeight30gMaterialBrassThread1/4"Tube connection13/10mmColorwhiteWarranty: 5 years???? Warranty Terms
The Alphacool Core Heat Gun enables the bending of HardTubes. It is simple and versatile. Compared to the Apex version, it is a cheaper alternative that does not have an LCD display.Easy handlingA switch on the handle allows the air speed of the Core Heat Gun to be regulated in two stages, while a rotary control allows the temperature to be adjusted. The device is designed for use in the hand or when switched off. Three different nozzle attachments for different areas of application are included in the scope of delivery.Maximum safetyThe Alphacool Core Heat Gun has feet that ensure a firm and secure stand, allowing HardTubes to be bent using both hands. The ventilation slots provide overload protection. As a temperature of up to 600°C can be reached, extreme caution is still required. Technical dataDimensions (L x W x H)250 x 75 x 190 mmMaterialPlastic / metalWeight520gCable length160cmTemperature control8 levels + Max PowerTemperature range60-600°CWind speed control2 levelsAir Output250-500L/minVoltage230V ACMax. power consumption2000WFrequency50/60 HzOperating Temperature-10°C ~ 40°CStorage Temperature-20°C ~ 65°CRelative Humidity45% ~ 85%Colorblue
The Alphacool ES quick-release connector is optimized for use in server and workstation systems. It is characterized by precise manufacturing quality, excellent water flow and a secure click mechanism for sealing.Maximum flow rateOther quick couplings can negatively affect the flow of water. The quick coupling has therefore been fundamentally redesigned so that the water flow is hardly disrupted. Particular emphasis was placed on minimal processing tolerances.Quick and easyThe ES quick connectors from Alphacool simplify the assembly of server and workstation systems. Thanks to the convenient handling, complex systems can be connected quickly and easily. To open the quick-release fastener, the outer ring is pulled back. The seal closes immediately and prevents coolant from escaping. To lock the quick-release fasteners, simply push them into each other. A clicking noise confirms secure locking.Note: To avoid damaging the O-ring, do not open or close the quick-release fastener when it is dry. Technical dataDimensions (L x D)67 x 28mmWeight150gMaterielnickel-plated brass, plasticThread2x 1/4" ITColorchrome, black
High-End CPU-Wasserkühler von aqua computer, transparentes Acrylgehäuse, vernickelter Kupferboden, für AMD Sockel TR4/STRX4, mit Thermal Grizzly Kryonaut Wärmeleitpaste
280-mm-Radiator mit 44 mm Dicke, Finnen und Kanäle aus Kupfer, exklusives Modding-Design, 5x G1/4-Anschlüsse, hochwertige Verarbeitung, geeignet für Custom-Loops
Effizienter 140-mm-PWM-Lüfter von SilverStone, Shark Force-Lüfterflügeldesign für geringere Geräuschemission und höhere Leistung, breiter Drehzahlbereich von 0 bis 2.200 U/min, modulares Kabelmanagement
