120mm PWM fan from Lian Li with an LCD in a 3-pack, unique plug system, improved Daisy-Chaining, with addressable RGB LEDs, max. 1,900 RPM, max. 105.3 m³/h airflow, and max. 2.9 mmH2O static pressure, Note: Controller included
The expansion tanks of the ULTITUBE series are equipped with a tube made of borosilicate glass, which, in contrast to the Plexiglas often used for tube expansion tanks, has a very high hardness and scratch resistance, a very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Both ends of the glass tube are firmly connected with metal rings made of black anodized aluminum, which do not come into contact with the cooling medium. The base and lid of the ULTITUBE series are made of resistant acetal and screwed to the glass tube. A large opening is available for filling the expansion tank after unscrewing the lid. A filter element made of a fine stainless steel wire mesh is integrated in the bottom of the container and, in addition to functioning as a particle filter, also separates air bubbles. The filter element is integrated in a molded rubber part and can, for example, be rinsed out under running water. The seal in the upper area of the glass tube is also designed as a molded rubber part for easy assembly and is therefore securely positioned when the lid is screwed on. All D5 pumps offered by Aqua Computer can be mounted on the bottom of the expansion tank, as well as pumps of the same design from other manufacturers. When developing the expansion tank, attention was paid to optimal flow behavior, the result is extremely quiet and quiet operation of the pump. The pump is attached using a slim, black anodized aluminum ring. It is not possible to use the expansion tank without a pump. Fastening material for mounting on a side / rear wall or a standing mounting are included in the scope of delivery. Four soft rubber decouplers are included for decoupling. Technical specifications: Filling volume: approx. 350 ml Connection thread: G1/4 Dimensions without pump: approx. 72 x 72 x 210 mm Dimensions with D5 pump (not included): approx. 72 x 72 x 250 mm Dimensions with D5 NEXT pump (not included): approx. 72 x 72 x 265 mm Scope of delivery: An expansion tank Fastening ring and seal for fastening the pump Fastening material Please note:The expansion tank is supplied without connections, please order suitable connections separately. A D5 pump is also required and is not included in the scope of delivery! When used with a D5 NEXT, the bracket included in the scope of delivery cannot be used; instead, it can be installed directly on the D5 NEXT. Alternatively, a suitable bracket is available as an optional accessory under item number 34111 (not included in the scope of delivery)
An extension cable for 4-pin PWM fans. Available in various lengths. Sleeving provides additional protection, stability and increased lifetime. Technical detailsLength30cmConnections4-pin to 4-pinMaterialPlastic, sleevedColorwhite
Alphacool's Core product series is characterized by high quality, outstanding performance and the uniform and functional design language.The copper cooler which, like the end terminal, is milled from a single piece of copper and is the core of this cooler. The fine workmanship, paired with the hard and resistant chrome plating covering the entire copper cooler, meet the highest quality standards. The chrome-plated brass G1/4" threads integrated on both sides stand out visually from the terminal. They are a central feature of the new design language that will be evident in all products in the Core series.The aluminum backplate adapted to the design, together with the terminal, makes up the entire unit and enhances the back of the cooler with a clean and homogeneous look. The lighting consists of digitally addressable RGB LEDs, which illuminate the entire cooler evenly and effectively.The technical advancements can be seen in the water supply to the jet plate as well as in the optimization of the jet plate itself. The jet plate has been completely redesigned based on many simulations and practical tests in cooperation with board partners. The fin thickness and spacing have been enhanced, the cooling surface has been increased and the water flow to the core components with the greatest heat output has been optimized. The enclosed special soft thermal pads with up to 7 W/mK adapt perfectly to even the smallest tolerances. Compatibility:- Nvidia GeForce RTX 4090 Founders Edition, 24GB GDDR6X (900-1G136-2530-000) Technical data coolerL x W x H208,87 x 148,69 x 32,33mmMaterial coolerchrome-plated copperMaterial cooler topacrylicMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom11,3mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs12Technical data backplateL x W x H208,87 x 125,69 x 5,76mmMaterialaluminiumColorblackWarranty: 3 years???? Warranty Terms
Alphacool introduces its new series of graphics card water coolers for the latest Nvidia GeForce RTX generation. Part of the Core product series, these coolers combine the highest quality with exceptional performance. Thanks to an optimized technical design, these GPU coolers deliver outstanding cooling performance.At the heart of the cooler is a copper block, precisely milled from a single piece and complemented by a precisely crafted brass terminal with a nylon cover. A chrome finish enhances the copper cooler’s durability and provides a smoother, more radiant surface than traditional nickel plating.The visual design of the GPU water cooler has been slightly modified. A new highlight is the Core emblem placed above the jetplate, which emphasizes its affiliation with the Core series and visually enhances the design. The series continues to feature high-quality brass connectors that ensure optimal quality and safety. The specially adapted aluminum backplate covers the entire backside of the copper cooler, ensuring a clear and uniform appearance. The acrylic, combined with aRGB lighting, allows for even and impressive illumination of the entire cooler.The GPU water cooler has been completely overhauled technically. To optimize cooling performance, the distances between the cooler and the components of the PCB were redefined and tested. The water flow was simulated using the most advanced software and verified through practical tests. These extensive tests allowed for improvements to the cooler base and jetplate, ensuring the best possible cooling performance for the new Nvidia GeForce RTX generation. Compatibility:- Inno3D Inno3D GeForce RTX™ 5080 iChill Frostbite (C50803-16D7X-1760FB)- Inno3D Inno3D GeForce RTX™ 5080 iChill X3 (C50803-16D7X-176069H)- Inno3D Inno3D GeForce RTX™ 5080 X3 (N50803-16D7-176068N)- Inno3D Inno3D GeForce RTX™ 5080 X3 OC (N50803-16D7X-17603930)- Inno3D Inno3D GeForce RTX™ 5080 X3 OC White (N50803-16D7X-17605211) Technical data coolerDimensions total (L x W x H)160 x 124,07 x 34,19mmMaterial coolerchrome-plated copperMaterial cooler topAcrylicMaterial terminalAcetalMaterial Connection threadBrassMax working temperature60°CPressure tested0,8 barThreads4 x G1/4"Thickness cooler bottom3,25mmThickness cooling fins0,4mmDistance cooling fins0,4mmIlluminationdigital aRGB LEDsPower connector digital aRGB LEDs3-Pin JSTPower digital aRGB LEDs5VNumber of digital aRGB LEDs7ColortransparentTechnical data backplateDimensions (L x W x H)160 x 95,36 x 6mmThickness backplate without spacers3mmMaterialAluminiumWarranty: 3 years???? Warranty Terms
Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality brass housing. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 / LGA 1851 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrassMaterial threadsnickel plated BrassThreads2 x G1/4“Power supply Digital RGB3-Pin 5VQuantity digital aRGB LEDs18Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight500gColorsilverWarranty: 5 years???? Warranty Terms
Alphacool presents the Core 1, a new generation of CPU water cooling. The latest desktop processors are continuously becoming more powerful, but also produce more and more waste heat. The Core 1 reliably solves this problem with the help of its entirely new 3D-Jetplate, which is also used in industrial applications. The all-metal CPU water cooler not only impresses with its elegant appearance, but also features a new mounting system that simplifies installation.The best of new and oldAlphacool brings the best of both worlds together with the Core 1. In addition to the new 3D-Jetplate, Alphacool returns to its roots by using a proven cross-slot technique to distribute coolant evenly across the redesigned cooler base. Inside the cooler, O-rings ensure precise water flow for effective cooling. The Core 1's housing is machined from a high-quality brass block and features nickel-plated connectors. The cooler's copper base, also nickel-plated, has been enlarged to ensure full coverage of large CPUs. New Mounting SystemThe mounting system has also been revised. Compared to previous Alphacool models, it requires fewer screws. First, the pre-assembly of the backplate (Intel) is done with four spacers. After that, the thermal paste is applied to the CPU. Then, the matching mounting frame is put on the CPU cooler and fastened with four nuts on the spacers.Core DesignThe functional and elegant design is a key element of Alphacool's Core series. The nickel-plated connectors and the discreet contour line stand out from the high-quality housing with carbon cover. The rounded corners add the perfect touch to the overall look. The Core 1 is available in various color designs, as well as in discreetly illuminated aRGB Aurora models. Compatibility:AMD: AM4 / AM5Intel: LGA 1700 Technical dataDimensions (L x W x H)72 x 72 x 26,50mmMaterial coolernickel plated copperMaterial cooler topBrass, CarbonMaterial threadsnickel plated BrassThreads2 x G1/4“Power supply Digital aRGB3-Pin 5VQuantity digital aRGB LEDs18Fin thickness0,4mmFin distance0,4mmPressure tested0,8 barMax working temperature60°CWeight500gColorblack, carbonWarranty: 5 years???? Warranty Terms
240mm radiator with 44mm thickness, fins and channels made of copper, exclusive modding design, 5x G1/4 inch connections, high-quality workmanship, suitable for custom loops.
Dual-tower cooler for powerful CPUsSix 6 mm heat pipesOne 120 mm and one 130 mm fan for improved airflowFans with a maximum of 2,200 revolutions per minuteVery high airflow with a maximum of 138.08 m³/h and static pressure of up to 2.57 mmH2OLow noise level at full load (maximum 32.1 dB(A))High compatibility with Intel and AMD processorsJonsbo HX6280: Powerful dual-tower cooler for high-end processorsWith the Jonsbo HX6280, your CPU is well-equipped to perform even the most demanding tasks without loss of performance. It is effectively kept cool by the two differently sized fans, preventing overheating.Efficient cooling through different fansInstead of limiting the fans to one size, Jonsbo uses two different fans for the HX6280. The 120 mm fan spins at a speed of up to 2,200 revolutions per minute, has a maximum airflow of 123 m³/h, and a static pressure of up to 2.57 mmH2O.On the other hand, the 130 mm fan reaches up to 2,000 revolutions per minute, has a maximum airflow of 138.08 m³/h, and a static pressure of up to 2.01 mmH2O. The differently sized fans lead to a more efficient airflow, resulting in overall better cooling.Noise level and compatibilityEven at full load, the CPU cooler runs surprisingly quietly: the 130 mm fan is no louder than 32.1 dB(A). Whether you're gaming or working, annoying fan noise is not a problem. With the high compatibility with the common AMD and Intel sockets, you also have the choice of which CPU to use.
120-mm PWM fan with aluminum framePractical wireless connection for fewer visible cablesDaisy-chaining on the fans for easy connection and mountingIntegrated display for stunning effectsSpeed, LCD, and lighting controllable via Lian Li L-Connect 3 softwareWhisper-quiet cooling with max. 1,900 RPM at 31 dB(A)92.25 m³/h max. airflow and max. 2.83 mmH2O static pressureRubber pads to decouple disturbing vibrationsNote: This fan requires a Lian Li L-Wireless controller, sold separately.Wireless ARGB-LCD Fans for Clean Cable ManagementThe UNI FAN TL Wireless LCD from Lian Li provides an efficient solution for cable management in your PC. With its wireless 2.4 GHz control for lighting effects and fan speed, you need significantly fewer cables, simplifying your system build. The fan offers dual-zone lighting effects and is versatile.Connection System for Seamless Fan ClustersThe mounting of the Lian Li UNI FAN TL Wireless series follows the smart concept of other Lian Li fans: The fans come with contact points and are easily connected using a practical connection system. Multiple fans can be joined together into a cluster.UNI FAN TL Wireless LCD: Easy Installation and Full ControlThe UNI FAN TL Wireless LCD is easily installed and controlled thanks to the L-Wireless controller. Through the wireless connection, you control both RGB lighting and fan speed directly through your motherboard, without the need for unnecessary cables.Adjustable Display and Quiet PerformanceThe LCD version of the UNI FAN TL Wireless allows you to customize the content on the built-in 1.6-inch IPS display. With the L-Connect 3 software, you can display your own videos, images, and system information. Thanks to Fluid Dynamic Bearing (FDB) technology, the fans run quietly and efficiently, even at high speeds of up to 1,900 RPM. This provides powerful cooling and an aesthetically pleasing solution for your PC, making traditional fans fade into the background compared to UNI FAN TL Wireless LCD!Reverse Blade for Clean Optics and Even More PerformanceLooking for a solution to optimize airflow in your PC while also improving the look of your fans? With a reverse blade fan, you choose innovative technology that directs airflow in the opposite direction.Your advantage: The look remains the same with every fan. Gone are the days when fans had to be mounted backward to pull in fresh air. Now, your system stays cool and stylish, even during the most intensive applications!
Tubing is the veins of a water cooling system! These are the next generation, made by Alphacool! Deep, intense colours as well as comfortable handling during installation and connection were our focus in developing these tubes. The result is tubing in a variety of sizes and colours, such as red, green, blue, or black. In developing these tubes, we specifically ensured that there would no longer be any need to deal with colour particles in the coolant fluid, but rather that all the colour would come from the tubing itself. Besides the colour, the installation and bending properties are of course very important in tubing. The ability to span a tight bend radius and comfortable handling in tricky spaces were also emphasised during development. This was optimised to perfection by mixing different combinations of synthetic materials, resulting in tubing that manages to bring opposing goals together in harmony and that will satisfy both amateur enthusiasts and experienced water cooling users! Manufactured in Germany, with the promise of consistent high quality. Our years of manufacturing experience guarantee that any product we sell is the best. Technical Specifications Material: PVC Colour: Transparent Inner diameter: 10mm, 3/8" Outer diameter: 16mm, 5/8" Wall thickness: 3mm Scope of Delivery 1x Alphacool tubing AlphaTube HF 16/10 (3/8"ID) - clear 3m (9,8ft) Retailbox
Die FT12 WH 120 mm Lüfter verfügt über einen leistungsstarken 3-phasigen, 10-poligen, 12-slot FOC-Motor mit geschlossenem Regelkreis und hochwertigen MQ-Magneten. Jeder FT12 WH-Lüfter verfügt über ein Fenster, durch das die hochwertige Technik des Lüftermotors und das echte Fluid Dynamic Bearing sichtbar sind. Hinter dem Lager befinden sich dezente weiße LEDs, die jedes Detail ausleuchten. Vollflächige Gummipuffer an allen Ecken sorgen für minimale Vibrationen und minimieren Geräusche, die durch ungleichmäßigen Anpressdruck entstehen.
Schwarzer Radiator im X-Flow-Design, für bis zu acht 120-mm-Lüfter in Push/Pull-Konfiguration, Vollkupfer-Aufbau mit schwarzem Stahl-Rahmen, 30 Millimeter Dicke und 16 FPI, 4x G1/4-Anschlüsse
The new generation of Alphacool NexXxoS radiators, a name that is known for experience and quality, is here to breathe new life into the radiator market!Everyone who uses watercooling needs a radiator, and everyone has different requirements for the heat exchanger. Naturally, consumers want the product that's best in class. The Alphacool NexXxoS radiators are here to challenge the best in their class, and be crowned the best radiators in every area and size. No more back and forth - with Alphacool NexXxoS radiators, you know what you're getting!Alphacool has been a trendsetter on the scene for developing and improving radiators for years. That's why these models are among the first radiators to really earn the descriptor "full copper"! All the main elements, not just the fins and channels, but also the channel heads are made of copper. Material-wise, this is a big advantage, and one where other radiators fall by the wayside. The Alphacool NexXxoS X-Flow radiators set themselves apart significantly from conventional radiators in their construction. The X-Flow radiators are built for high flow rates. The slanted copper chambers on either side are built identically. This means the water can flow through all the channels at the same time until it flows into the opposite chamber and leaves the radiator.Freedom in the installation is one of the central points on which Alphacool's development department focused. Both copper chambers have three 1/4" threads. That means connections can be attached on the top, bottom and at the front or back (not on the NexXxoS ST30). Fewer angles are needed, which increases the flow rate and offers more options in the installation. Here, too, Alphacool carries the standard sizes of the 120mm series. Different strengths, 30mm, 45mm and 60mm underscore the wide spectrum that these radiators cover. The installation of the radiators, as well as the fans and radiator faceplates, is easy to do with this series: the M3 threads are standard in the radiator sector, affordable and available in all lengths.Even the dreaded mishap of turning the screws in too deeply won't lead to costly damage with this radiator: an inner protective edge stops the screw before it can come into contact with the fins.The fin spacing was chosen so that the radiator could reach its optimal cooling performance even with slow or medium-speed fans. This is not only comfortable in terms of background noise, but also puts no constraints on the choice of fans. All in all, it's where experience and powerful performance meet with a forward-looking approach and sophisticated solutions.Alphacool NexXxoS Radiators - the one tool for all your cooling needs! Technical dataCooling channelsCopperColorblackFan threadM3SlatsCopperThickness39 - 49mmConnection2x G1/4"Lüftergröße140mm [7]Number of fans3HousingSteelManufacturerAlphacoolFins per inch16Pressure tested0,8 barQuantity of cooling channels28
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.This Radiator can discharge up to 1600 W at an ambient temperature of 30°C and fans with 4000 rpm.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)277 x 124 x 60mmQuantity of cooling channels36Thickness49 - 69mmCooling channelsCopperColorblackFan threadM3Connection6x G1/4"SlatsCopperNumber of fans2Fan size120mmHousingSteelManufacturerAlphacoolPressure tested0,8 barFins per inch10
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. The material already gives an advantage over the competition and the inner structure is up to par with the competition. Separated chambers give the coolant a clear direction, allowing high flow rates which improve the performance of the whole cooling loop.Flat chambers on the heat exchanger increase mounting flexibility thanks to the reduced overall length.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities. Hence the radiator can even be installed in tight enclosures, where otherwise internal installation is not a possibility. A 1/4" screw plug allows easy de-aeration of the radiator (on all UT60 and NexXxos Monsta) and hassle-free vertical installation of the heat exchanger. The threaded opening can even be used for filling, e.g. in combination with a Fillport.Versatility is the essence of the new NexXxos series! The radiators are available in different versions to be used with 120mm, 140mm or 180mm fans and are available in different thicknesses. The choice of 30mm, 45mm and 60mm offers the perfect radiator for every purpose. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)468 x 144 x 86mmQuantity of cooling channels58Cooling channelsCopperColorblackFan threadM3Number of fans3Connection6x G1/4"SlatsCopperThickness69 - 100mmHousingSteelManufacturerAlphacoolPressure tested0,8 barFins per inch10Fan size140mm
For more than a decade, Alphacool has dominated the market with its Full Copper radiator series. Our extensive portfolio of radiator variants is unique worldwide, just like our manufacturing process, which enables us to craft all water-bearing parts and cooling fins from pure copper. Thanks to their exceptional performance, these radiators can effortlessly dissipate even extremely high waste heat, making them indispensable in many sectors of the cooling industry.The next step in evolution: HPE Full Copper Radiator!The Full Copper HPE Radiator uses the same materials as the previous NexXxoS models but takes a technical step forward. With a denser internal structure, the number of water channels and copper fins has been increased. This design ensures a larger water volume is in direct contact with the cooling fins, significantly enhancing heat transfer. The increased number of fin rows and their shortening also results in a much more efficient utilization of the cooling surface. Comparison tests with the conventional NexXxoS radiator have demonstrated that the HPE radiator can achieve a performance improvement of 4.5K. At higher ambient temperatures and fan speeds, the performance gap between the HPE and standard NexXxoS radiators increases progressively, with possible performance gains of up to 6K.Connection options & mountingThe HPE radiator features two IN or OUT connections with G1/4" threads in the pre-chamber area. On the opposite side, there is a fill or drain port for filling and draining the water circuit. The radiator comes with all necessary screws for case and fan installation. Additional screws are typically not required.Safety firstThe HPE radiator is equipped with special protective plates beneath all mounting holes to prevent screws from being inserted too deeply. This ensures the cooling fins and water channels underneath are protected from damage.Patented screw plugsAll HPE radiators use Alphacool's patented screw plugs. Protruding screw plugs often prevent the radiator from being installed flush. Alphacool's screw plugs are fully recessed into the radiator, flush with its surface, allowing for easy and seamless installation in the case. Technical dataDimensions (L x W x H)391.5 x 124 x 30mm (+/- 3%)Quantity of cooling channels12Material cooling fins, pre-chambers & channelscopperMaterial threadsbrassMaterial outer housingstainless steelThreads4x G1/4" IN/OUT & 1x Fill-/Drainport G1/4" (max. 5mm thread length)Possible fan size120mmPossible fan assembly2x one-sided / 4x both-sidedThread size fan mountingM3Pressure tested0.8 BarMaximum working temperature60°CFin density18 FPIWeight790gColorwhiteWarranty: 10 years???? Warranty Terms
Phobya R27-S280 Black Radiator – Powerful cooling performance with dual 140mm fan option The Phobya R27-S280 Black Radiator is an excellent choice for powerful PC systems that want to benefit from the high airflow and quiet operation of 140mm fans. With support for two of these fans, it offers a generous cooling surface and balanced performance. High-quality materials for reliable efficiency: As with all radiators in the Phobya R27 series, only high-quality materials are used in the S280. The fine fins are made of 99.9% copper with a density of 18 FPI (fins per inch), enabling optimal heat dissipation. The water channels are made of H65 copper, while robust H62 brass is used for the pre-chambers and the sturdy G1/4 inch connections. This guarantees a long service life and excellent thermal conductivity. Well-thought-out design for flexible applications: With its dimensions of 313.5 × 140 × 27 mm, the R27-S280 offers considerable cooling capacity while still fitting into many common cases designed for 280 mm radiators. Its weight of 660 grams reflects its solid construction. Optimal fan compatibility for efficient airflow: The radiator is designed to accommodate up to two 140 × 140 mm fans. This configuration provides powerful yet often quieter airflow compared to smaller fan formats with the same cooling performance. Matching M4 screws for 30 mm thick fans and 6 mm mounting screws are included. Tested quality and environmental awareness: Each Phobya R27-S280 radiator undergoes a 1-bar pressure test to ensure absolute leak-tightness and reliability. Furthermore, the radiator is RoHS compliant, confirming compliance with current environmental guidelines. Technical data at a glance: Fin material: High-quality copper (99.9%), 18 FPI Material channels: copper H65 Material pre-chambers & threads: Brass H62 Connections: G1/4 inch Dimensions ( L × W × H ): 313.5 × 140 × 27 mm Weight: 660 g Fan compatibility: Up to 2 × 140 × 140 mm fans Supplied screws: M4 for 30 mm fan, 6 mm mounting screws Pressure tested: 1 bar RoHS compliant The Phobya R27-S280 Black Radiator is the ideal solution for users looking for powerful and efficient cooling with 140mm fans in a well-sized format.
The Alphacool Y-Splitter aRGB 3-Pin to 4x 3-Pin 15cm cable in black is designed for ARGB accessories (3-Pin / 5 V). This 15 cm long cable allows you to connect up to four ARGB elements, making it ideal for customizing your PC's lighting setup. It is compatible with various manufacturers and motherboards, ensuring versatile use. With a net weight of 0.021 kg, it is a lightweight and efficient solution for your ARGB needs.
Phobya R27-S360 Black Radiator – Large-area cooling performance for your high-end system Expand your system's cooling capacity with the Phobya R27-S360 Black Radiator. This generously sized radiator is designed to ensure superior heat dissipation even in high-performance and demanding setups, unleashing the full potential of your components. High-quality materials for maximum efficiency: The Phobya R27-S360 relies on a proven material combination for excellent cooling results. The fins are made of high-quality 99.9% copper with a density of 18 FPI (fins per inch), providing a very large surface area for heat exchange. The water channels are also made of copper (H65) to ensure outstanding thermal conductivity. Durable brass (H62) is used for the pre-chambers and the robust G1/4 inch connections, guaranteeing durability and a secure connection. Optimized design for strong performance: With its dimensions of 393 × 120 × 27 mm, the R27-S360 offers a substantial cooling surface and is ideal for systems requiring intensive heat dissipation. Its weight of 725 grams underscores its solid construction and the amount of copper used. Flexible fan compatibility and easy installation: The radiator is designed for use with up to three 120 × 120 mm fans, allowing for massive airflow for cooling. M4 screws for 30 mm thick fans and 6 mm mounting screws are included for easy installation. Tested quality and environmental awareness: Each Phobya R27-S360 radiator undergoes a 1-bar pressure test to ensure leak-tightness and reliability. Furthermore, the radiator is RoHS compliant, thus complying with current environmental guidelines. Technical data at a glance: - Fin material: High-quality copper (99.9%), 18 FPI - Material channels: copper H65 - Material pre-chambers & threads: Brass H62 - Connections: G1/4 inch - Dimensions (L × W × H ): 393 × 120 × 27 mm - Weight: 725 g - Fan compatibility: Up to 3 × 120 × 120 mm fans - Supplied screws: M4 for 30 mm fan, 6 mm mounting screws - Pressure tested: 1 bar - RoHS compliant Rely on the Phobya R27-S360 Black Radiator for a powerful, reliable, and large-area water cooling solution that keeps your system cool.
The new Alphacool NexXxos radiators, a name that stands for experience and quality has come to bring a fresh breeze to the radiator market.Every user of a water cooling system needs a radiator and everyone has different requirements towards the heat exchanger. Of course the customer always demands the best in its class. The Alphacool NexXxos radiators have come to compete with and to beat the best in their class and to be the best radiator in all sizes. No more endless choices without a clear class leader, the Alphacool NexXxos is the one tool for all your needs!Alphacool has been the company to introduce new developments and improvements in the radiator and water cooling sector generally many times over the last years.Following this tradition, the new NexXxos radiators are the first to truly deserve the “Full copper” attribute. All main parts, not only the fins and channels, but the chambers are also made from copper. This brings an improvement in performance where other radiators are left without a chance. In structure, the Alphacool NexXxoS X-Flow Radiators differentiate materially from the standard radiators. The X.Flow Radiators are designet for high flow rates. The bevelled copper chambers on both sides have an identical structure. This Water is jetting at the same time through all avialable channels to the other chamber to whitch it then leaves the radiator.Versatile and easy mounting is one of the main points, on which the research and development department at Alphacool focused. The chamber offers three possibilities for fitting installation on both inlet and outlet (not on the NexXos ST30). Less angled fittings are needed, improving flow rates and offering more mounting possibilities.Here, too, Alphacool provides the popular sizes of the 120mm series. Different thicknesses, 30mm, 45mm and 60 mm underscore the broad spectrum that cover these radiators. Even mounting and installation of fans and radiator grills is easy and versatile with these radiators: The M3 threads are standard in the radiator sector and available in all lengths at an affordable price.Even the dreaded insertion of a screw too far into the radiator does not result in expensive damage. Unlike other radiators, the NexXxos series is equipped with an internal protective ledge which stops the screw before it damages the fins.Fin spacing is always an important factor in radiator design. The new series from Alphacool has a fin design which allows it to perform extremely well even with slow-spinning and medium-speed fans. This is not only pleasant thanks to the fact that it avoids unnecessary noise; it also means that the choice of fans that can be used with these radiators is not restricted.These radiators are the result of experience and powerful performance meeting future-oriented design and well-thought through solutions.Alphacool NexXxos radiators: The one tool for all your cooling needs! Technical dataDimensions (L x W x H)293 x 124 x 45mmQuantity of cooling channels24Cooling channelsCopperColorblackFan threadM3Connection6x G1/4"SlatsCopperThickness39 - 49mmNumber of fans2Fan size120mmHousingSteelPressure tested0,8 barManufacturerAlphacoolFins per inch16
