This CPU cooler from EKL, the company behind the Alpenföhn brand, is especially suitable for HTPCs or SFF builds thanks to its compact form factor. The 92 mm fan delivers a maximum airflow of 77.81 m³/h at up to 2,200 RPM, supporting a TDP of 65 W. With a height of only 55 mm, this cooler fits even the smallest PCs, whether it's an office PC, HTPC, or SFF build. The 92 mm fan features 4-pin PWM control and boasts a long lifespan of 30,000 hours. Additionally, the cooler impresses with a maximum noise level of just 25.7 dB(A) at full load.
Thermal Grizzly introduces the Thermal Putties, a new product line specifically developed for the modification of graphics cards and the replacement of thermal pads between PCBs and heatsinks. However, Thermal Putties can also be used by hobbyists and experienced technicians for a variety of devices such as notebooks, handhelds, and gaming consoles. Flexible alternative to thermal pads with versatile areas of application Especially suitable for heatsinks with varying distances to critical components Basic version with medium thermal conductivity for efficient components Safe to use due to electrically insulating properties The flexible alternative to thermal pads: The Thermal Grizzly Putty Basic Thermal Grizzly Putty is a non-conductive alternative to traditional thermal pads. As an easy-to-apply and flexible gap filler, it compensates for height differences and is thus ideal as a replacement for thermal pads on graphics cards and other devices. Typically, several types of thermal pads of different heights are installed at the factory. When replacing these pads or modifying the cooler to a GPU water cooler, several different pads are needed. The flexible usability of Thermal Grizzly Putty solves this problem. How much Thermal Grizzly Putty do I need? For modifying a single, smaller graphics card without a backplate (e.g. GeForce GTX 1060), approximately one 30-gram jar of Thermal Grizzly Putty is needed. For a larger graphics card like a GeForce RTX 4090, usually one 30-gram jar is sufficient for the memory (VRAM) and voltage converters (VRM) on the front. On the back, between the PCB and the backplate of larger graphics cards, there is often a uniformly larger gap between the two surfaces. To completely fill this gap, about two 30-gram jars or one 100-gram jar are needed. Three variants for different applications With three different variants, the manufacturer offers the right product for every performance class. The Basic version is suitable for efficient components that produce little heat. The Advance version, with higher thermal conductivity, targets the mid-range segment with stronger components. For the high-end segment, Thermal Grizzly offers the Putty Pro, which ensures optimal cooling of your high-end components due to its excellent thermal conductivity. Flexible and safe application Before application, the target surface should be thoroughly cleaned and degreased, for example with Thermal Grizzly cleaning wipes or standard isopropanol. Thanks to its electrically insulating property, it can be applied over large areas using the included spatula. Alternatively, the Thermal Putty can be shaped by hand into small balls that can be sized according to the surface being covered (e.g. VRAM, SMD).
Benefit from high performance and stylish design with the TRYX PANORAMA 360 AiO water cooling system. This all-in-one liquid cooler keeps your system running at low temperatures, ensuring constant performance from your high-end hardware. The 3D AMOLED display also gives you brand new ways to personalize your gaming PC. AiO water cooling with a 360 mm wide and 30 mm high radiator Powerful Asetek Gen8 V2 pump with up to 3,600 RPM Three 120 mm ROTA SL Pro fans with high airflow and static pressure Anamorphic 3D AMOLED display with 2K resolution and 60 Hz High compatibility with common AMD and Intel sockets TRYX PANORAMA 360: AiO water cooling for high-end PCs with innovative display Maximum cooling performance meets stylish showpiece: With the TRYX PANORAMA 360 AiO water cooling, you’ll take your high-end system to the next level, both visually and technically. Innovative features, strong performance, and a stunning display ensure that your gaming PC stays cool even under full load—while making an impressive statement. Impressive visual possibilities with the 3D AMOLED display The iconic anamorphic 3D AMOLED display of the TRYX PANORAMA turns heads—futuristic, brilliant, and absolutely unique. Give your gaming PC a breathtaking highlight and show off what your build is made of: With animated effects, system stats, and loads of style, your gaming PC becomes a real eye-catcher! The custom-developed KANALI software from TRYX provides you with a wide selection of 3D images and videos that come to life on the screen. The software is continuously updated with new content, so you can regularly customize the display. With this water cooler, you add a unique touch to your PC! High cooling performance thanks to the built-in Asetek pump Thanks to the flexible mounting, the position of the copper base plate can be adjusted so that it sits perfectly over the CPU cores. Optimized coverage of the heat source, especially on Intel Core Ultra processors, significantly enhances cooling performance. This way, you can get the maximum potential out of your CPU! Enjoy maximum cooling without annoying humming: The improved Asetek Gen 8 V2 pump delivers up to 3,600 RPM and remains pleasantly quiet at just 25.3 dB(A). On top of that, compatibility has been expanded—perfect for modern high-end setups. Premium ROTA SL Pro fans for plenty of fresh air The 360 mm radiator features three powerful 120 mm ROTA SL Pro fans. A maximum airflow of 138.16 m³/h and a static pressure of up to 3.66 mmH2O make these fans perfect for use on a radiator. Your CPU is cooled efficiently—with a low noise level of just 30.97 dB(A). One cable, full control: With the magnetic connector, you can easily control fan speed centrally. Power and signal lines between the fans run through contact points—saving you cables, space, and hassle during installation.
GPU water cooler for ASUS ROG ASTRAL-5090 graphics cards, with backplate and RGB lighting Precisely fits ASUS ROG ASTRAL GeForce RTX 5090 graphics cards Striking appearance with transparent design G1/4-inch fittings for integration into your loop Backplate included Addressable RGB lighting Barrow ASUS ROG Astral GeForce RTX 5090: Powerful GPU Block The Barrow ASUS ROG Astral GeForce RTX 5090 full-block water cooler is a high-quality cooling solution for custom water cooling setups, engineered specifically to fit the PCBs of ASUS ROG ASTRAL-5090 graphics cards. Its copper block ensures efficient cooling for the GPU, memory, and voltage regulators. The cooler offers a sophisticated aesthetic with a transparent design combined with RGB lighting. Cooling Performance Meets Design The GPU water block covers all major heat sources and cools them effectively. Copper ensures optimal heat transfer, delivering strong performance even under heavy workloads. The lid is composed of transparent acrylic with integrated RGB lighting. The white backplate is made of aluminum and also contributes to heat dissipation. G1/4-inch fittings allow you to easily integrate the cooler into your water cooling system. Note: Please note that this GPU water block is only compatible with the following graphics cards: ASUS ROG ASTRAL LC Strix RTX5090 D 32G GAMING ASUS ROG ASTRAL Strix RTX5090 D 32G GAMING
This Barrow Special Adapter is a 90-degree fitting in silver, designed for custom water cooling systems. It features a G1/4 inch male to G1/4 inch female connection, making it compatible with common water cooling components. The adapter has a net weight of 0.0570 kg. Ideal for optimizing tube routing in tight spaces, it ensures both reliability and style in your build.
90-degree adapter in black, designed for custom water cooling setups. Features a G1/4" male to G1/4" female connection, making it ideal for tight spaces and precise tubing alignment. Compatible with standard water cooling fittings and components. Net weight: 0.0570 kg.
This Barrow Dazzle 90° Adapter is designed for custom water cooling setups. It features a G1/4 inch male to G1/4 inch female connection, making it easy to route tubes at a right angle for improved flow and organization. The adapter is finished in a sleek silver color to match your build. Net Weight: 0.0290 kg.
The BitsPower Artemis Rotary Extender in Sandblasted Silver is a 90° rotatable fitting designed for watercooling systems. Crafted from durable brass with CNC precision, it features a G1/4 inch thread to ensure high compatibility with most watercooling components. Its integrated O-ring provides a secure, leak-proof seal. The extender is ideal for creating tight loops and achieving elegant builds. Net weight: 0.0600 kg.
ColorPrimary Color White Dimensions Outer diameter 24 mm Water Cooling Intended use Adapter Connection type Adapter Connectors 2x G1/4" outer thread Suitable for hard tubes No Angle Angled No Rotatable Yes Lighting / RGB No
Brass sealing plug from Barrow, featuring the Kepler series design, ensures reliable sealing of outlets with a G1/4" thread.This sealing plug from Barrow turns any unused outlet into a visual highlight. With its distinctive silver design, it not only seals redundant ports securely and reliably, but also adds an impressive look.
The BitsPower Artemis Rotary Extender in matte black is a 90° rotatable fitting designed for watercooling loops. It features CNC precision and is CNC-machined from durable brass for lasting performance. With a standard G1/4 inch thread, it offers high compatibility with a variety of components. The integrated O-ring ensures a tight seal, making it perfect for tight spaces and elegant build designs. Net weight: 0.0600 kg.
The Bitspower Artemis Adv Multi-Link OD 14 mm in Sandblasted Silver is a fitting designed for 14mm hard tubes (outer diameter) in watercooling systems. It features a minimalist design and includes a magnetic ring for easy visual adjustment. Crafted precisely from copper, this fitting ensures durability and performance. The net weight is 0.3670 kg, offering a solid and reliable component for your setup.
The BitsPower Artemis 90° rotary fitting in platinum gray is a water-cooling fitting designed for efficient and elegant builds. It features a 90-degree angled, rotatable design, offering flexible installation options. The fitting has a G1/4-inch male thread to a 90-degree G1/4-inch female thread, making it compatible with standard water-cooling components. Constructed from copper, it combines durability with a sleek, stylish appearance. Net weight: 0.5000 kg.
This water cooling fitting features a 45-degree tilt and a rotatable design for flexible installation. It comes with a G1/4-inch male thread connecting to a 45-degree G1/4-inch female thread. Made of copper, it ensures durability and efficient heat transfer. The elegant platinum gray finish adds a refined touch to your cooling setup. Net weight: 0.0730 kg.
The BitsPower Artemis 90° fitting is a rotatable connector designed for watercooling systems. Finished in matte black, it provides both aesthetic appeal and reliable performance. Its sturdy construction ensures a secure fit for your cooling setup. Model: BPM-AT90R-MB. Net Weight: 0.5000 kg.
The Bitspower Artemis 90° Fitting is a water cooling fitting featuring a rotatable 90-degree angle for versatile installation. It comes with a G1/4-inch external thread to a 90-degree G1/4-inch internal thread, making it compatible with standard water cooling components. Constructed from copper, it ensures reliable durability and performance. The sandblasted silver finish provides an elegant appearance to complement your setup. Net weight: 0.5000 kg.
The BitsPower Artemis 45° Fitting features a rotatable design for flexible installation in water cooling systems. It is constructed from durable copper with a sandblasted silver finish, offering an elegant appearance. The fitting has a G1/4-inch male thread on one end and a 45-degree angled G1/4-inch female thread on the other. This allows for efficient routing of tubing while maintaining a secure connection. Net weight: 0.7200 kg.
The BitsPower Artemis 45 Degree Fitting features a rotatable design, allowing flexible installation in custom water cooling systems. It offers a precise 45-degree angle, with a G1/4-inch external thread to a 45-degree G1/4-inch internal thread, ensuring compatibility with standard fittings. Made from durable copper, it combines reliability with an elegant matte black finish. This fitting is ideal for optimizing tubing orientation and enhancing the appearance of your water cooling setup. Net weight: 0.0720 kg.
The Bitspower Artemis 45 Degree Rotatable Fitting in Stardust Gold is designed for water cooling systems. It features a 45-degree angled, rotatable design for flexible installation. The fitting connects G1/4-inch external thread to a 45-degree G1/4-inch internal thread. Made of copper, it offers durability along with an elegant appearance. Net weight: 0.7300 kg.
The expansion tanks in the ULTITUBE series are equipped with a tube made of borosilicate glass, which, in contrast to the Plexiglas often used for tube expansion tanks, has a very high level of hardness and scratch resistance, very low thermal expansion and excellent chemical and thermal resistance. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Both ends of the glass tube are firmly connected to metal rings made of black anodized aluminum, which do not come into contact with the cooling medium. The base and lid of the ULTITUBE series are made of durable acetal and are screwed to the glass tube. This means that a large opening is available for filling the expansion tank after unscrewing the lid. A filter element made of a fine stainless steel wire mesh is integrated into the bottom of the container, which not only functions as a particle filter but also separates air bubbles. The filter element is integrated into a rubber molded part and can be rinsed out under running water, for example. The seal in the upper area of the glass tube is also designed as a rubber molded part for easy assembly and is therefore securely positioned when the lid is screwed on. The PRO version of the ULTITUBE D5 has a gas exchange membrane integrated directly into the cover of the expansion tank. The membrane continuously compensates for pressure fluctuations caused by temperature changes without allowing coolant to escape. An RGBpx-compatible LED ring with 13 individually addressable LEDs is included in the scope of delivery and can be used to effectively illuminate the expansion tank. An Aqua Computer control unit with RGBpx output is required to operate the LED ring (e.g. D5 NEXT, not included in the scope of delivery). At the end of the strip there is a connector for connecting another RGBpx component. For additional, vibration-damped fastening of the expansion tank in the upper area of the glass tube, a rubber fastening ring with a stainless steel insert is included in the scope of delivery. All D5 pumps offered by Aqua Computer can be mounted on the bottom of the expansion tank, as well as identical pumps from other manufacturers. When developing the expansion tank, attention was paid to optimal flow behavior, the result is an extremely quiet and smooth operation of the pump. The pump is attached using a slim, black anodized aluminum ring. It is not possible to use the expansion tank without a pump. Fastening material for mounting on a side/rear wall or for standing installation is included in the scope of delivery. Four soft rubber decouplers are included for decoupling. Technical data: Filling volume: approx. 110 ml Connection thread: G1/4 Dimensions without pump: approx. 72 x 72 x 110 mm Dimensions with D5 pump (not included): approx. 72 x 72 x 150 mm Dimensions with D5 NEXT pump (not included): approx. 72 x 72 x 165 mm (All dimensions without fastening material) In the Ultitube series, the number 50/100/150/200 in the product name refers to the length of the glass tube in millimeters. Scope of delivery: An expansion tank RGBpx compatible LED ring RGBpx connection cable, length 50 cm Rubber mounting ring with stainless steel insert Mounting ring and seal for fixing the pump Fastening material Please note: The expansion tank is supplied without connections, please order suitable connections separately. A D5 pump is required additionally and is not included in the scope of delivery! When used with a D5 NEXT, the bracket included in the scope of delivery cannot be used, instead a standing installation can be carried out directly on the D5 NEXT. Alternatively, a suitable bracket is available as an optional accessory under item number 34111 (not included in the scope of delivery).
This is a mounting kit for the use of a LEAKSHIELD for the ULTITUBE without ULTITUBE reservoir. Technical Data: Dimensions with mounting bracket: approx. 140 x 82 x 46 mm Connection thread size: G1/4 Scope of delivery: Inlay plate made from acetal Gasket Fastening ring made from anodized aluminum Stainless steel bracket Mounting material
EK Water Blocks EK-Quantum Kinetic³ FLT 240 D5 PWM D-RGB - Plexi : Pump/Reservoir Combo for Compact Custom Loops The EK-Quantum Kinetic³ FLT 240 D5 PWM D-RGB is a compact pump/reservoir combo with an integrated D5 pump, addressable D-RGB lighting, and a transparent Plexi housing. The 240 size follows common fan/radiator mounting points for space-saving integration. Key Features: Genuine D5 Pump: Delivers a flow rate of up to 1000 l/h with a maximum head pressure of 5.2 m. PWM Speed Control: Pump speed can be regulated via a 4-pin PWM signal from roughly 20 to 100%. Addressable D-RGB Lighting: Individually addressable D-RGB LEDs for fully customisable lighting. Nine G1/4" Ports: Enables a flexible port configuration for different loop layouts. 120mm Fan Mounting: Standard fan mounting holes allow for space-saving installation inside the case. Technical Specifications: Size: 240 Pump: D5, up to 1000 l/h, max. 5.2 m head Operating Voltage: 12V DC, 20W Ports: 9x G1/4" Material: Stainless steel, PPS-GF40, EPDM seals, aluminium oxide Max. System Temperature: 60°C Ideal for: The EK-Quantum Kinetic³ FLT 240 D5 PWM D-RGB is ideal for: compact custom loops where pump and reservoir need to be combined in a space-saving way users looking for a powerful D5 pump with addressable RGB lighting With the EK-Quantum Kinetic³ FLT 240 D5 PWM D-RGB, you get a powerful, compact pump/reservoir combo for a space-saving custom loop build.
Die Alphacool Apex Distro Plate ist das optische Upgrade für das Dark Base Pro 901. Speziell für dieses Gehäuse entworfen, ersetzt sie das Front Cover und hebt jede Custom-Wasserkühlung auf das nächste Level. Ein Must-Have für alle, die höchste Leistung und Design vereinen möchten. Die aus hochwertigem Acrylglas gefertigte Apex Distro Plate, ermöglicht einen freien Blick auf den Wasserkühlkreislauf. Das Zusammenspiel der aRGB-Beleuchtung sorgt für ein beeindruckendes Farbspiel, das das Gehäuse perfekt in Szene setzt.
Distro plate for Phanteks NV9 19x G1/4-inch ports for the GPU and CPU coolers, as well as radiators Supports up to 3x 420 mm large radiators Universal adapter for D5 and DDC pumps Stylish RGB lighting Stealkey Customs Phanteks NV9 x Stealkey Distroplate: Build your own custom water cooling loop The Stealkey Customs Phanteks NV9 x Stealkey Distroplate makes routing the hard tubes of your custom water cooling loop significantly easier and visually upgrades your system. It is compatible with the Phanteks NV9 and replaces the original front panel to act as a reservoir and pump solution. Plenty of ports Maximum flexibility for high-end cooling: This distro plate with 19 ports supports complex loops with multiple pumps, radiators, and cooling blocks – perfect for high-end PCs and showcase systems. For optimal cooling, up to three 420 mm radiators are possible, ensuring your hardware doesn't lose performance. The included adapter gives you the option to install either a D5 or DDC pump, giving you complete freedom of choice. The D5 pump is attached to the distro plate using the included D5 ring made of POM and the adapter. The DDC pump, however, can even be screwed directly to the adapter. Easy installation and RGB lighting Mounting the distro plate is quick and easy, as the screws fit perfectly into the case mounting holes. Additionally, the customizable RGB lighting lets you light up your system the way you want – including the coolant fluid.
This universally usable thermal pad from Akasa is made of silicone elastomer and can be easily cut to fit any size. It measures 70x20 mm and has a thermal conductivity of 1.2 W/m·K. The pad effectively helps with heat dissipation for M.2 SSDs. It is lightweight, with a net weight of only 0.0150 kg. Perfect for ensuring optimal thermal management for your components.
The Kolink ARGB 3-Pin Splitter Cable allows you to extend a D-RGB source to create an aesthetically pleasing lighting system. It features standard 3-pin addressable RGB headers from one female connector to two female connectors. Two male-to-male adapters are included. The splitter cable can be used with any standard 3-pin 5V RGB controller or all common RGB headers from major motherboard manufacturers. The arrow marking on the 3-pin LED connector must be aligned with the +5V marking on the D-RGB header.
Manual air release valve designed for water cooling systems. Its compact design makes it suitable for installation in tight spaces, making it ideal for venting water cooling circuits. The valve features a G1/4 male thread and comes in a sandblast silver finish. Net weight: 0.3400 kg.
