Der Temperatur Sensor ist an einem ca. 40 cm langen Kabel angebracht und kann dort platziert werden, wo es besonders heiß werden kann. Dies stellt sicher, dass die Temperatur im gesamten Gehäuse nicht höher als 38 °C werden und unterstützt die Kühlung der CPU oder Grafikkarte. Technische Daten: Geschwindigkeit: 300 - 1350 rpm Luftstrom: 53 CFM/ 90.1 m³/h Statischer Druck: 1 mm H₂O Geräuschpegel: 0.3 Sone Betriebsumgebungstemperatur: 0 - 40 °C Lüfterrahmen: Standard Kontrolltyp: Temperature Control Anschluss: 3-Pin-Connector Lüfterlager: Fluid Dynamic Bearing Typische Spannung: 12 V DC Anlaufspannung: 6 V Stromstärke/ Spannung: 0.20 A / 12 V Kabellänge: 400 mm
CPU cooling fan, 9 cm, 55 W, blue LED, 4 pin CPU cooler 9 cm for Intel LGA 775/115X/1200 series and AMD series CPU socket Power dissipation up to 55 W Hydraulic bearing Fan: horizontal MTBF: 40,000 hours Heat dissipation power: 55 W Fan interface: 4 PIN Fan bearing: Hydraulic bearing
The CORSAIR H100 RGB all-in-one liquid CPU cooler delivers strong, dependable cooling and stunning lighting, with two CORSAIR SP120 RGB ELITE PWM fans, a 240mm radiator, and 29 RGB LEDs.
All-in-one water cooling in black, 240mm radiator, two EK-Vardar 120 D-RGB, stylish design, and quiet operation, compatible with AMD and Intel sockets (including LGA 1700)
Kompakter 140 mm Radiator für Wasserkühlungen, aus Kupfer, hohe Finnendichte, für besonders kleine Custom-Loops, für Hardware aus dem Einsteigersegment
The SilverStone Nitrogon is a low-profile CPU cooler designed specifically for Intel LGA 1700 sockets, featuring a compact and versatile top-down design. With a minimal height of just 45mm, it is perfect for slim and small form factor systems. The cooler includes a 92mm fan for efficient cooling performance. Its dimensions are 10.5cm in width, 9.7cm in height, and 10.6cm in length, and it weighs 290 grams. For more details, visit the SilverStone website.
Kompakte AiO-Wasserkühlung von SilverStone, 240-mm-Radiator aus Aluminium, integrierte digital adressierbare RGB-LED-Beleuchtung, flacher 22-mm-Radiator, für Intel- und AMD-Sockel
Tootekood: ZM-AF120 ARGB BLACKGTIN: 823884203929Jahutid ja lisad
Fan ZM-AF 120 ARGB black This fan is characterized by compact dimensions of 120 x 120 x 26 mm, which allows for easy installation in most computer cases. Its speed can reach up to 2000 revolutions per minute, ensuring effective cooling of components even during intensive use of the computer. Additionally, the Fan ZM-AF 120 ARGB has the ability to adjust the rotational speed, which allows you to adjust the cooling to individual needs. One of the greatest advantages of this product is the ARGB backlight, which not only gives the computer a modern look, but also allows you to create a unique design tailored to your preferences. Thanks to the use of active air cooling, the Fan ZM-AF 120 ARGB effectively dissipates heat, preventing overheating of components and extending their life. This fan is equipped with a 4-pin connector, which guarantees a stable connection to the computer's motherboard. Despite its efficiency, the ZM-AF 120 ARGB Fan is characterized by a low noise level of only 29.7 dB, which makes the computer's operation quiet and comfortable. The set includes all the necessary accessories for installing the fan, which makes the assembly process simple and quick. Additionally, the low weight of the product (160 g) does not burden the computer's structure, which is especially important when building efficient configurations.
Alphacool’s Eiszapfen Connector Series is the high-end execution of these tried-and-true connectors! Every requirement you could have of a connector is met with this series: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Components are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The slanted edges of the nut make sure the O-ring sits tight against the HardTube, so that it is even more secure than in its predecessors. This provides more security in transport. Anyone looking for colourful options has them: the O-rings in the shipment come in three colours. With the available UV-light option, these will even light up in the corresponding colour. Model: HardTube Compression Fitting 16mm This connector has a 1/4" outer thread. The other side fits HardTubes with an outer diameter of 16mm. Technical Details Material: brass Colour: deep black Dimensions Diameter: 24mm Height: 18mm Scope of Delivery 1x Alphacool Eiszapfen 16mm HardTube compression fitting G1/4 for plexi- brass tubes (rigid or hard tubes) - knurled - deep black sixpack
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice. The inner diameter of these fittings truly deserves the „high flow“ attribute! The first three colours, Chrome, Deep Black and Shiny Copper offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. The limits are endless with these Alphacool fittings in combination with Alphacool tubing! With a new process during chromatising the surface finish is completely connected with the brass body, hence ensuring permanent intense colours and peeling of the chrome layer. The Alphacool name in blue lettering on some of the fittings additionally underlines the individuality of these items. Functionality of this connector:This fitting can be used to connect 16/10mm tubing with a G1/4“ connection thread. The fitting is angled by 45° and is revolvable, allowing easy hose routing in the system. Technical specifications: Material: Brass, chromatizedColour: Chrome Dimensions:Length: 36mm Width: D20mmHeight: 40mm Hose size compatibility : 16/10mm Extent of delivery:1 x Alphacool HF Screw connector 45° G1/4 outer thread on 16/10 revolvable - Chrome This product has been reviewed for you:ModdingbaseXtremesystems (Engl.) (userreview)PT-reviews (Pt)
The Alphacool Eiszapfen is a rotatable 8 mm offset fitting with one internal thread and one external thread that can be easily tied into any water circuit. Integration made easy The offset piece is very compact and can be integrated into any water cooling system thanks to its G1/4" internal and external threads. It is simply screwed onto the corresponding G1/4" connections at the desired position in the water circuit. Design The threads are 5mm deep and 5mm high respectively, thus enabling the very compact design. The offset piece can also be rotated 360°, which provides additional flexibility for integration even in the tightest cases. Coloured O-rings In addition to the standard black O-ring, 3 more O-rings in red, yellow and blue are included.Compatibility:G1/4" OT/IT threads Technical data L x W x H 24 x 22,5 x 18,5mm Material brass Offset 8mm Threads G1/4" IT, G1/4" OT Thread depth 5mm Thread height 5mm Weight 28g Color chrome
With the Alphacool Eiszapfen you connect your hardtubes at the perfect 90° angle. The hardtube is tightly screwed to the union nut, seals immediately and can be easily loosened with one hand. The fitting can be rotated freely (360°) thanks to the 90° angle. The possibilities are almost limitless. Technical Details width: 38mm Length: 38 mm Material: brass Color: Deep Black
Alphacool's Eiszapfen connector series is the high-end execution of these tried-and-true fittings! Everything you want in a compression fitting is here: highflow, form, processing and colour. A refusal to compromise in development and production has made the Eiszapfen series into what it is. Fittings are available in brilliant chrome or a deep, matte black, which will fit excellently into any system. A special procedure binds the outer coating firmly to the surface, improving the longevity of the intense colour and preventing any chipping or peeling of the coating. Every connector now has the Alphacool logo, which along with their distinctive shape makes them unmistakable! The union nut's slanted corners allow the O-ring to be pressed firmly against the HardTube, ensuring it sits even more securely than before. This allows for greater safety in transport. Model: 90° compression fitting 13mmThis fitting has a 1/4" thread on one side and is thereby compatible with 95% of components. The other side fits a 13mm acrylic or brass tube. This fitting is bent 90° in the middle to avoid complicated hose connections. The threaded side is rotatable for maximum flexibility. Technical Specifications Material: brass Colour: deep black Dimensions Length: 42.5mm Width: 21mm Scope of Delivery 1x Alphacool Eiszapfen 13mm HardTube compression fitting 90° rotatable G1/4 for plexi- brass tubes - deep black Fitting MapYou can find an interactive map of all Alphacool fittings here.
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: Deep Black Diameter: 26 mm Height: 23 mm Thread: G1/4" Thread length: 5 mm HardTube size: 16 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,042 kg Scope of supply: 1x Alphacool Eiszapfen PRO 16 mm HardTube Fitting G1/4 - Deep Black
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position. The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside. Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing. Technical details: Material: brass Colour: chrome Diameter: 26 mm Height: 23 mm Thread: G1/4" Thread length: 5 mm HardTube size: 16 mm Compatibility: PETG, acrylic, brass and glass tubes Weight: 0,042 kg Scope of supply: 1x Alphacool Eiszapfen PRO 16 mm HardTube Fitting G1/4 - Chrome Sixpack
The HardTube project has become a reality. Alphacool is breaking new ground and setting a new standard!Up till now, the most commonly used method for connecting water cooling systems was normal PVC tubing - but now, Alphacool is offering another way to set up your system. HardTubes provide more organisation for a system, giving it a distinctly more structured appearance. Available now are the brand-new brass tubes, in black chrome and chrome. With the corresponding connectors and their easy functionality, these tubes can be linked or sealed together for an absolutely leak-proof fit. The plexiglass tubes can be fitted into a system easily with the right bending tools, without requiring extra angled pieces. The tubes must be cut to the right length in order to fit into the system. The following options are available:HardTube 13/10mm Clear Plexi 20cm, 40cm, 60cm and 80cmHardTube 13/10mm brass chrome 20cm and 40cmHardTube 13/10mm brass black chrome 20cm and 40cmHardTube 16/12mm Clear Plexi 20cm, 40cm, 60cm and 80cmHardTube 13/10mm 90° Plexi 10/30cm, 20/40HardTube 16/13mm 90° Plexi 10/30cm, 20/40Reviews:MNPCTech.comNote: Due to the made-to-fit pipes, some effort is required to plug the connections in straight.Scope of delivery:1x Alphacool HardTube 13/10mm 90° Plexi (PMMA) 20/40cm Note: not compatible with Monsoon fittings
Alphacool's new quick couplers with the name "Eiszapfen" are the next block in the "Eis" series. High quality and impressive features makes any watercooling system back to a piece of high-quality and practical! A quick coupling is used everywhere where expandability, flexibility and cleanness play an important role. These compact couplings have a 1/4 "thread on both sides with which they are compatible with all standard connections. By pulling down the outer ring these couplings can be disconnected. Both sides close immediately completely tight so that no water can escape. Thanks to the special N.D.S.L. Technology (no drip, no splash, no leak) a leak, drip or splash out of the water on opening the lock is excluded. By assembling again, both sides must click into each other audibly and shut themselves tightly by a double O-ring, which is simply compressed when plugged together.Likewise, the mechanism was designed for durability to ensure a secure connection even years. Many quick couplings usually also affect the flow rate. But Alphacool has found a way to resolve this issue. A high flow rate is maintained at these quick couplings! Alphacools quick couplers are available in two finishes. In deep black and fully chromed these add seamlessly on every system. Technical Details: Dimensions (L x D): 64,6 x 23,9mm Material: Brass Colour: Deep Black Thread: 2x 1/4" internal thread Scope of Delivery: 1x Alphacool Eiszapfen quick release connector kit G1/4 inner thread - Deep Black
